Procurement Of Electrical Materials For The Various Panchayat At Sardar Vallabhai Patel, Maharani Laxmibai, Maharana Pratap, Sahid Bhagat Sinh, Vanakbara, Saudwadi, Bucharwada And Zolawadi Areas In Diu District. (Dpu-2345)-Supplying LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glasswith company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %. (fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage protection. (iii) Above 60 to 90 watts (Cat II) 3 Erecting & fixing charge LED Street light fittings 60 to 90 Watt as directed by Engineer in charges. 4 Supplying LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glasswith company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD <10 %, CCT 3000 K to 5700K, Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/ watt. LED driver efficiency > 85%. (fittings required LM-79 & LM-80 certificates) (NOTE: Below description have shown ranges of Wattage capacity of LED fittings. The Engineer incharge may select any wattage capacity between the ranges shown.)(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage protection. (ii) Above 48 to 60 watts (Cat II) 5 Erecting & fixing charge LED Street light fittings 48 to 60 Watt as directed by Engineer in charges. 6 Supplying LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glasswith company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10%, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/ watt. LED driver efficiency > 85 %. (fittings required LM-79 & LM-80 certificates) (NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)(B) Flood Light (IP-65),Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage protection. (vii) above 200 to 250 watts (Cat II) 7 Erecting & fixing charge LED Flood light fittings 200 to 250 Watt as directed by Engineer in charges. 8 Supplying LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glasswith company mark/name engraved or embossed 160 to 270V, Power Factor more than 0.95, THD <10 %, CCT 3000 K to 5700K, Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/ watt. LED driver efficiency > 85%. (fittings required LM-79 & LM-80 certificates) (NOTE: Below description have shown ranges of Wattage capacity of LED fittings. The Engineer incharge may select any wattage capacity between the ranges shown.)A) Street Light (IP-65), Surge protection -4KV integral and, Light must have 440VAC line supply with over-voltage protection. (i) above 36 to 48 watts (Cat II) 9 Erecting & fixing charge LED Street light fittings 36 to 48 Watt as directed by Engineer in charges. 10 Supplying approved make time switch with single pole air break contacts suitable for 230V. 15/16A. complete with self starting motor driven clock ‘ON’ & ’OFF’ automatic arrangement at any predetermined time during each 24 hours, With nickel cadmium rechargeable battery backup as directed. 11 Erecting & fixing charge time switch with single pole as directed by Engineer in charges. 12 Providing AC-3 duty 3 pole power contactor with 2 NO & 2 NC aux contacts complete with 415V/220V operating coil suitable for (L&T, BCH, T.C., Siemens, C&Smake). (A) for 25 / 32 A rating 13 Erecting & fixing charge AC-3 duty 3 pole power contactor for 25 / 32 A rating as directed by Engineer in charges. 14 Providing XLPE (IS:7098) (I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables 4 core 16 Sq. mm 15 Erecting charge XLPE (IS:7098) (I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. size of cables 4 core 16 Sq. mmas directed by Engineer in charges. 16 Providing Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size in existing pipe 2 wire 1.5 sq. mm 17 Supplying XLPE (IS:7098) (I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size. 3 core 2.5 Sq. mm 18 Supplying electrical insulation L.T. Tape role with ISI marked having nominal width 1.8 cms nominal length 9.0 mtr nominal thickness 0.125 mm and having self adhesive PVC 19 Providing Aluminium Unarmoured TC Wire 2 core 6 Sq.mm make:Bintex/ RR Kabel/ Finolex or equivalent as directed by EngineerIn charge. (incl. GST) 20 Providing Aluminium Unarmoured TC Wire 2 core 4 Sq.mm make:Bintex/ RR Kabel/ Finolex or equivalent as directed by EngineerIn charge. (incl. GST) 21 Supplying LED lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge protection, Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitableLAMP holder (iii)10 to 15 watts(Cat III) 22 Providing Approved make Ceiling fan with double ball bearingISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy erected on existing hook or clamp with earthing. [Make shall be approved by Engineer in charge] 23 Providing 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity (c) 63 Amp. (Cat III) 24 Providing 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity 32 Amp. (Cat III) 25 Providing Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark (Cat III) 26 Supplying LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/ CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor more than 0.9, THD <15%, CCT 3000K to 6500K, Luminaire efficacy> 85 lumens/ watt, LED LED driver efficiency > 85 % (fitting required LM-79 & LM-80 Certificates) (NOTE: Below description have shown ranges of Wattage capacity of LED fittings. The Engineer incharge may select any wattage capacity between the ranges shown.)Tube Light with integral driver 18-20 Watts, Surge - 2KV, IP-20, conventional 4 feet Cat-III 27 Erecting & fixing charge LED Tube Light with integral driver 18-20 Watts, Surge - 2KV, IP-20, conventional 4 feet Cat-III as directed by Engineer in charges. 28 Supplying Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper wires of following size 0.75 Sq.mm twin twisted 29 Supplying Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper wires of following size 2.50 Sq.mm 3 core round PVC sheathed 30 Providing pair of rubber hand gloves suitable for working on 11KV /22KV supply. 31 Providing & Supplying G.I. Clamps for LED fittings, Poles, and Pole Arm. Including necessary nut bolt clamps as per design & directed by the Engineer in charge. 32 Total Rs.i.e. % above/below on estimated cost put to tender
