Tender For Construction Of Sharmik Suvidha Kendra At I.A. Amausi, Sarojini Nagar, Chinhat, Kursi Road, Raebareli Site 1 And 2. - Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes. DSR:10.16.2 2 Providing and fixing internal wall panels on Light gauge steel frame work with 12.5mm thick gypsum plaster board conforming IS 2095:2011 fixed on cement board as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make, Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm. Proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately, Cement Fiber Board 8 mm thick as per IS 14862:2000 oftype B (High pressure Steam Cured). DSR:26.43.1 3 Glass wool 50mm thick DSR:7274 4 Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).25 mm thick. DSR:9.18.2 5 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work. DSR:13.52.1 6 Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on inter locking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/black),comprising of main-T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles. DSR26.23.1 7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.50mm dia nominal outer dia pipesDSR 18.7.6 8 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid. DSR:17.3.1 9 Providing and fixing wash basin with Ci brackets ,15mm C.P brass pillar taps 32mm C.P brass waste of standard pattern , includingpainting of fitting and bracket cuttingand making good the wall wherever require white vitereous china wash basin Size 630x450mm with a pair 15mm C.P brasspillar taps inculding all fittings DSR.17.7.1 10 ProvidingandfixingC.P.brasslongnosebibcockofapprovedquality conforming to IS standards and weighing not less than 810 gms. 1)CP Bib cock 15mm dia DSR 18.50.1 11 Providing and fixing 600x450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick hard boardground fixed to wooden cleats with C.P. brass screws and washers complete. each DSR17.31 12 Providing and Placing on terrace (at all floor level)polythene water storage tank, IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipe but without fittings and the brass support for Tank. DSR 18.48 13 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore DSR 18.52.1 14 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter. DSR 12.41.2 15 Providing and fixing concealed hinge of approved quality for 19-20 mm thick door with stainless steel screws complete. DSR :26.11 16 Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer in charge (Door handle, lock and stopper etc. to be paid separately) DSR: 21.18 17 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. DSR:9.83 18 Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment.DSR:25.1 19 4 mm thick ACP. DSR:2631 20 Supplying and fixing following Modular base and cover plate on existing modular metal boxes etc. as required: 1 or 2 Module DSR : 1.28.1 21 Supplying and fixing following Modular base and cover plate on existing modular metal boxes etc. as required: 4 Module DSR :1.28.3 22 Supplying and fixing following Modular base and cover plate on existing modular metal boxes etc. as required: 6 Module DSR : 1.28.4 23 Supplying and fixing following Modular base and cover plate on existing modular metal boxes etc. as required: 8 Module DSR 1.28.5 24 Supplying and fixing following Modular base and cover plate on existing modular metal boxes etc. as required: 12 Module DSR 1.28.6 25 Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required : 32A TP&N DSR: 2.1.1 26 Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required : 100 TP&N DSR :2.1.3 27 Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surfaces / recessed steel conduit as required : 2 X16 sq.mm +1 X 6 sq.mm earth wire : DSR 1.7.6 28 Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surfaces / recessed steel conduit as required : 4 X16 sq.mm +2 X 6 sq.mm earth wire : DSR 1.7.11 29 Supplying and drawing following sixes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/PVC conduit as required 8 x 1.5 sq.mm DSR 1.17.8 30 Supplying and drawing following sixes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/PVC conduit as required 8 x 2.5 sq.mm DSR 1.17.17 31 Supplying and drawing following sixes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/PVC conduit as required 8 x 4 sq.mm DSR 1.17.26 32 Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required 75mm X 75mm X 60mm deep DSR 1.22.1 33 Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required 100mm X 100mm X 60mm deep DSR 1.22.2 34 Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required 200mm X 125mm X 60mm deep DSR 1.22.6 35 3- Seater made in MS sheet with cushioned seat and back 36 Round table with wooden legs 37 Wooden chair with cushioned seat and back 38 Smart LED T.V. 32 39 Tower type cooler/ Fibre body 40 Branded wall fans 41 LED lights 15 W 42 Exhaust with 9 span 43 Water dispenser with small refrigerator 44 Acrylic signage with waterproof lights (UPSIDA + SHRAMIK SUVIDHA KENDRA)
