Tender For Provision Of Technical Eqpt Store And Special Repair To Building No T-15, T-19 And T-23 At Janglote Under Ge Basoli.; 1 Excavation in trenches n exc 1.5 m wide and n.exc 1.5 m in depth for foundation of pole/stay and laying of UG cable/GI pipe etc and getting out in any type of soil complete all as specified and directed. 2 Excavation over area not exc 1.5m deep in any type of soil and getting out complete all as specified anddirected. 3 M&L returning, filling and including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed. 4 Removing excavated material nexc 50m and depositing where directed at a level nexc 1.5mtr above the starting point , complete all as specified anddirected. 5 Surface excavation not exc 30cm deep and averaging 15cm deep and gettingout in any type of soil complete all as specified anddirected. 6 M&L Cement concrete M-7.5 (Nominal mix),type D-2, 1:4:8, (using 40 mm graded crushed stone aggregates) in foundation filling and mass concrete, post holes etc complete all as specified and directed. 7 M&L Cement concrete M-10 (Nominal mix),type C-2, 1:3:6, (using 40 mm graded crushed stone aggregates) in surface channel and drainetc complete all as specified and directed. 8 Extra for forming fair finished drain or drain channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred stopped ends etc complete all as specified and directed. 9 M&LReinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregates as in foundations, including rafts, footings, foundation beams, plinth beams, bases of columns etc basement slabs, under-reamed piles and mass concrete complete all as specified and directed 10 M&LReinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregates as in slabs, supported on walls, beam and columns in floors and in shelves and the like complete all as specified and directed. 11 M&LReinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregates as in columns, pillars, piers, posts and struts complete all as specified and directed. 12 M&LReinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregates as in beams, chajja, cantilevers, bressummers, lintels over 1.5 mtr span complete all as specified and directed. 13 Steel Formworkto sides of concrete foundations,footings, bases of columns, raft and raft beams,sides and sofits of foundation and plinth beams; and similar works; vertical or to batter for rough finished flat surfaces complete all as specified and directed. 14 Steel Form work to sides and soffits of floor/roof beam for rough finished flat surfaces of concrete complete all as specified and directed. 15 Steel Form work to sides of pillars, posts, struts, piers, columns and stanchionsfor rough finished flat surfaces of concrete complete all as specified and directed 16 Steel Form work to soffits of suspended slabs such as roof slabs, floor slabs etc not exceeding 200mm thick complete all as specified and directed. 17 M&L TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally forhooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 18 -ditto- here-in-before but 8mm dia and over upto and including 10mm diaas in stirrups, spacers, binders complete all as specified and directed. 19 Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed. 20 Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed. 21 M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc.complete of frame size 125 x 60 mm complete all as specified and directed. 22 M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed. 23 S&F 30 mmthick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed . 24 S&F For Glazed and skelton shutters 35mm thick of 2nd class HW open rebated and prepared to receive glass or wire gauze etc. shutters divided in square with sash bars, size of members of shutters as specified in SSR Part-1, secton 8, clause 8.20(a) complete all as specified and directed. 25 S&F Galvanised MS wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed. 26 S&F stainless steel barrel tower bolts 150 mm long of extruded sectionfixed with stainless steel screws , ISI marked, complete all as specified and directed . 27 S&F For MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. 28 S&F Stainless steel handle ,150 mm size. complete all as specified and directed. 29 S&F aluminium alloy, anodised, sliding door with hasp and size 300mm long with hasp, staples and fixing clips of sheet extruded section and fixing bolts of extruded section complete all as specified and directed. 30 S & F floor stopper 150mm length of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed 31 S&F in repair aluminium hat and coat hooks, solid body 175 mm to 250 mm complete all as specified and directed. 32 S&F for 150mm long aluminum handles, cast type, anodized complete all as specified and directed. 33 S&F for 150mm long aluminum, anodized, barrel tower bolts of extruded section and fixed.complete all as specified and directed. 34 M&L for preparation of treated/un-treated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 35 S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coveringscomplete all as specified and directed. 36 S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coveringscomplete all as specified and directed. 37 Providing & fixing Windows/ ventilators fabricated from roll framed sections made of galvanized steel colour coated/ powder coated (Base steel as per IS 513 “D” quality galvanized as per IS 277 with zinc of 120 gms/Sqr. Mtr.) with total coated thickness of 0.60mm incl painting, with Frame section 72mm x 55mm, Mullion section 72mm x 50mm, Shutter Frame 47mm x 20mm, incl 5mm plain/figured float glass and wire mesh,handle, lock and other accessories with powder coated guard bars Grill of size 10mm sq. MS Bars and 6mm x 12mmMS flat fixed using fasteners etc complete all as specified and as directed. Make:ECO – 4000 Series Windows (Double Rebate) NCL Windoors, Tata, JSW or its equivalent. 38 M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed . 39 M&L for preparation of old steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paintcomplete all as specified and directed. 40 Materialand labour for plain cement concretetypeB-1 1:2:4 (20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones, bed plates, kerbs ,water troughs and the like including weathering, slightly rounded or chamfered angles andthroating, complete all as specified and directed. 41 M&L for roof treatment with the following specification - applying water proofing treatment on horizontal or vertical surfaces by applying oil bound bitumen primer @ 0.20 Kg/sqm and providing 3mm thick APP modified water proofing membrane weighing not less than 3 Kg/sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm, The overlap shall be minimum 100mm on transverse direction and 75 mm on longitudinal direction and sealing overlap by torch application and bonded and applying a coat of blown grade hot bitumen 85/25 over and below the membrane @ 1.20 Kg/sqm in drying over the membrane finished with solar reflective bituminous aluminium paint/ primer @ 0.10 Kg/sqm over RCC roof slab/ parapet after cleaning the surfaces by removing dust, dirt etc. as per manufacturer’s instructions including 15mm thick screed in CM 1:4and all as specified and as directed.NOTE :- The work shall be executed at site as approved by the GE. 42 Supply and fixing for 18 to 20mm thick (weight not less than 10.5 Kg/Sqm) including magnetic catch PVC Ultra Violet chemical, glosymate finish 100% termite/water proof, fire retrandent eco friendly solid board both side decorative choice laminate as in kitchen cabinet, loft cupboard etc fixed with screws to steel/ timber frame work etc complete all as specified and directed by Engineer-in-Charge. 43 S&F 110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed. 44 S&FPVC (SWR) Bends in any radius 110 mm borecomplete all as specified and directed. 45 Dismantling of wrough iron or mild steel work of any description not otherwise provided for complete all as specified and directed. 46 Dismantling of ceiling asbestos cement board any thickness including cover fillets complete all as specified and directed. 47 S&F in position suspended false ceiling system using E-gridsuspended ceiling grid system. The size of grid shall be 600x600mm with GI frame work main runner 38x24mm cross tee 25x24mm and wall angle 24mmx24mm using 9mm thick ceiling panel laminated wth PVC film on front face and foil back available in due drop texture as per IS- 2095 Part-I 1996 fixed in the grid of E grid suspended ceiling Grid system duly suspended by 4mm dig GI wire hangers from the purlins of the roof with butter fly clips.complete all as specified and directed. 48 M&L Structural steel, rolled section such as joist, beam, channel, angle, tee, in available lengths Fe 410-W (Gde-E-250) Quality-A, for steel railing, Iron Grills,Structural fencing and steel staging as requiredcomplete all as specified and directed. 49 S&F 4mm dia galvanised mild steel plain wire bands, straps, support or stays for rainwater ventilating pipes including bolts if reqd hooks (stay) heavy for large gates hook and pintle hinges large hasps and staples chain hand made sliding bolts, clamps, hold fasts wall ties hooks for hanging fans plain angle cleats for securing purlins to wood trusses or rafter knee piece inserts two way and three way straps plate washers and similar small articles conforming to Fe-290 Gde E-165 complete all as specified and directed. 50 S&F in repair/new curtain rod aluminium alloy tubular with fixing brackets, stop etc. complete all as specified and as directed. 51 Demolition cement concrete unreinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed. 52 M&L for 75 mm thick PCC type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base complete all as specified and directed . 53 M&L machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS-15658-2006 of 80 mm thickness, M-40 grade with grey cement and pigment over and including 50mm thick layer of sand filling complete all as specified and directed. 54 M&L Hardcore of broken stone or bouldersof gauge n. exc. 63mm, deposited spread and levelled in layers n. exc. 15cm thick, watered and rammed to a true surfacecomplete all as specified and directed. 55 M&L Terra kota tiling 10mm thick set and jointed with grey cement with pigment and pointed with neat cement slurry in chajjas over 15mm thick screed bed in CM 1:4 over PCC coping 1:3:6 type C-1 (using 20mm graded agg) complete all as specified and directed. 56 M&L For Damp proof course 40mm thick in 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. (WPC Measured and Paid Separetely) 57 M&L Anti-termite treatment tothe soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. 58 M&L Anti-termite treatment tothe bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. 59 M&L Anti-termite treatment tothe soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed. 60 M&L for Premium Quality Durastone / Endura heavy duty vitrified tiles of size 300 mm x 300 mm x 10mm to 12mm thickas in floors and skirtingset and jointed in neat cement slurry and pointed inwhite cement to match the surface complete over screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4for laying floor finishes complete all as specified and directed. 61 Dismantling stone slabs and tiles of any description or thickness in floor apron etc laid bedded and pointed in any mortar complete all as specified and directed. 62 M&L for Machine cut kota slab flooring 18 to 20mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes including Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed. 63 M&L for Machine cut kota slab skirting 16 to 18mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing and taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles complete all as specified and directed 64 M&L Granite Black Colour of any type 18 to 20mmthick machine cut as in cooking plateforms and over 20 mm screed bed in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. 65 Rounding/mouldingto edges of stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooding platform and other similar situations etc complete all as specified and directed. 66 M&L for rendering 15mm thick in cement mortar 1:6, on fair faces of brick work or concrete surfaces , finished even and smooth without using extra cement, preparation of new plasteredsurfaces of walls and applying 2mm thick wall care putty andtwo coat oil emulsion distemperon walls complete all as specified and directed . 67 Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed 68 M&L Brick work with sub class B bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 incl complete all as specified and directed 69 M&L Brick work with sub class B bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:4 incl complete all as specified and directed 70 M & Lfor Half thick Brick wall work curved on plan in any radius with old size bricks built in cement mortar 1:4and external pointed flush in same mortar as the work proceeds complete all as specified and directed. 71 M&L For preparation of New Plastered surfaces and applying two coats of Acrylic emulsion (Apex) over a coat of primer complete all as specified and directed. 72 M&L for Preparation of new plastered surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less then 50 gm/litre and UV resistence as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. 73 M&L for Preparation of old plastered surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less then 50 gm/litre and UV resistence as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete all as specified and directed 74 Taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed. 75 M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or conrete surfaces finishing the surface even and smooth without using extra cement complete all as specified and directed 76 M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or conrete surfaces finishing the surface even and smooth without using extra cement mixed with liquid ater proofing compound @ 3% of cement weightcomplete all as specified and directed 77 M&L 75 mm thick PCC, type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) as in plinth protection finishing the surface even and smooth without nusing extra cement. complete all as specified and directed 78 M&L forrendering 5 mm thick in CM (1:3) finished surface even andsmooth w/o using extra cement in ceiling and applying three coats of white wash on ceilingcomplete all as specified and directed 79 Supply only integral Water Proofing Compound. complete all as specified and directed 80 M&L for complete removal of existingsurfaces of walls and applying 2mm thick wall care putty andtwo coat oil emulsion distemperon walls complete all as specified and directed . 81 Supply and layingfor XLPE insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 Volts grade,of size 16 Sqmm, 2 corecomplete all as specified and directed by Engr-in-Charge .Note : Earth work including excavation, returning filling, removing, DWC pipe covering for mechanical protection of cable etc will be measured and paid for separately under respective items of schedule. 82 Supply and fix for DWC high density polythylene pipes having dia 63/50 as per site requirement having corrugation on the wall and plain surface on the wall conforming to IS : 14930 (Part-I & II) for protection ofunderground cable laid along pole/along wall/in PCC on GL/and including all fitting as required complete all as specified anddirected. 83 Supply and fixing in trenches/under roads/under floor/on walls innew position tubing GI Light grade of 40 mm nominal bore of pipe with screwed sockets joints (such as bends, elbow, tees, etc) complete all as specified and directed . 84 Taking down copper/aluminum point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as per specified and directed. 85 Point wiring with 1.5 Sqmm FRLS, PVC insulated andunsheathed multi stranded flexible copper conductor cable inand incl rigid PVC conduitconcealed medium grade with pressed mild steel terminal boxes(sheet not less than 1.6 mm thick) duly painted with a coat of red oxide primerwith suitable thickness plastic laminated sheet cover 3mm thickofadequate size for one light or one fancontrolledby one switch incl 1.5 Sqmm FRLS, PVC insulated andunsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as specified and directed by Engr-in-charge.Note: a) Rate for cutting chases for conduits and sinking for boxes and making good to wall, floors deemed to be included in each point etc (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for any necessary point with proper fixing clips and no extra cost shall be paid for the job etccomplete all as per specified and directed. (c) colour coding is to be maintained. (Ph-Red, N-Block, Half-yellow, Earth-Green). 86 All as per item No 85 but for one 3 pin 5 Amp socket outlet on independent board complete all as per specified and directed. 87 All as per item No 85 but for one 3 pin 5 Amp socket outlet on same board complete all as per specified and directed. 88 Point wiring with 2.5 sqmm FRLS, PVC insulated andunsheathed multi strandedflexible copper conductor cable drawn in and including rigid PVC concealed conduit medium grade of suitable size with sunk cast iron/pressed steel terminal boxes(sheet not less than 1.6mm thick) of adequate size with suitable thickness plastic laminated sheet cover 3mm thick for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm FRLS, PVC insulated and unsheathed copper conductor cable(multistranded)as earth wire to common earth dolly, complete all as per specified and directed. 89 S & F for switch piano flush type one way 5 amps SP complete all as specified and directed.Make: Havells (REO) or technocommerically equivalent make ofcona/SSK. 90 S & F socket outlet3 pin 5 amps flush type complete all as specified and directed. Make: Havells (REO) or technocommerically equivalent make of cona /SSK. 91 Supplying &Fixing switch socket combination 2 in 1, 5 amps, 230 volts, flush type complete all as per specified and directed. Make: Havells (REO) or technocommerically equivalent make of cona /SSK. 92 Supplying &Fixing switch socket combination 2 in 1, 15 pin, 5 amps, 230 volts, flush type complete all as per specified and directed. Make: Havells (REO) or technocommerically equivalent make of cona /SSK. 93 S&FLampholder, PVC/Polycarbonate type with bakelite back plate having matching colour to holder suitable for angle/batten fittings complete all as per specified and directed. 94 S&F ceiling rose surface 65x50mm three terminal with bakelite back plate complete all as specified and directed. 95 S&F fan regulator electronic flush type stepped (rotary type) with 5 steps speed control complete all as specified and directed. 96 S&F of LED Bldg security lights of 35 Watt, 230 V having pressure die cast aluminium housing with system lumens efficacy≥100 lumen/W IP65 protection, IK07 rating, inbuilt electronic driver with PF>0.95 incl Gl bracket of suitable dia bend to shape and fixed to wall by means of clamps or nuts bolts and connecting up with three core twisted flexible copper conductor cable. Make of street light fitting- Bajaj, cat part no :ENXT P 35L WH PO PC SD/Havells, cat part no: ENDURASUNDOWNSL35WLED765PASYBOPC/ Wipro, cat part no:LR08-501-XXX-57-XX/Crompton, cat part no:TRP-400-35-57-SL-LM-NSR including taking out old/unsv securtiy light any type and rating complete all as specified and directed. 97 Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose of make : Philips, cat part No :BN170C LED20S-6500 PSU L120 / Havells, Cat part no: LUMILINEPLUSNEOBS20WLED865SPCSSIND/ Crompton, cat part no : CCS-100-20-65-HL2-DP-NWH/ Orient, cat part no :LBLN-20-C-SQ-AL complete all as specified and directed 98 Supply and fixing of Environmental friendly, ultra modern, pre die cast aluminium housing ,energy saving, surface mounted, decorative hexagon bulk head Back-lit LED luminaire comprising of high brightness LEDs. suitable for 10W IP-66 of make : Havells , cat part no :HEXAFT10WLED857SSYMBOPC/ Crompton, cat part no : CIS-306-10-57-SL-DP-NBK/Orient ,cat part no :LIBHP-10-C-V1 complete all as specified and directed. 99 M&L for SPN MCB DB 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar, neautral bar, earth bar and cable ties for cable management including polyuthrene gasket complete fixed flush in wall including cutting chases on wall for taking out old DB and fixing of new DB and making good disturbed surface of wall with cement mortar and finishes to match exisiting surface complete all as specified and directed. 100 M&L for SPN MCB DB 12 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar, neautral bar, earth bar and cable ties for cable management including polyuthrene gasket complete fixed flush in wall including cutting chases on wall for taking out old DB and fixing of new DB and making good disturbed surface of wall with cement mortar and finishes to match exisiting surface complete all as specified and directed. 101 S&F MCB SP 6-32 Amps with 10KA breaking capacity of B series in distribution board complete all as per specified and directed. 102 S&F in replacementMCBs single pole and neutral (SPN)/isolator 40 Amps with 10 KA breaking capacity of B series in distribution boards all as specified and directed. 103 Supply and fixingceiling fans copper wounded complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)complete all asspecifiedand as directed. 104 Taking down and refixing of ceiling fan of 1200/1400 mm sweep ,including oiling , greasing,and cleaning and applying two coat of synthatic enamel paint after preperation of surface complete over a coat of red oxide primer,complete all as specified anddirected. 105 Supply and fix in repair/replacement down rod 12 mm dia made out of high density mild steel 600mm long as per approved sample complete all as specified and directed. 106 Supply and fix in repair/replacement rubber insulator Heavy duty, Shackle Kit with bolts nuts & split pin etc complete for 1400/1200mm sweep ceiling fan complete all as specified and directed. 107 M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanizediron or steel all as shown in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust, common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40mm thickRCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced withsuitable handle and angle iron frameand necessary excavation and earth work in any type of soil etc. complete all asspecifiedand as directed includingtesting on completion. (Note: The rate quoted include cost of min 7.5 metre earthling wire .)
