Tender For Special Repair To Bldg No 3Abt (Crew Room) & T-20 (Tech Store) At Nainital Under Ge Ranikhet.; 1 BOQ/Sch A B/R portionDismantling plain or corrugated steel sheeting, any gauge, thickness as in roof coverings. 2 Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. 3 Dismantling of timber scantling 40 Sqcm and over in section in any position as in framed work complete all as specified and directed. 4 M&L for 25mm 2nd class hardwood Boarding, supplied & fixed with nails in any situation (except flooring and skirting) 5 Fixing only second class hardwood boarding of any thicknesscomplete all as specified and directed .( Note :- Old boarding shall be obtaind from item No - 02 above) 6 M&L for second class hardwood (wrought) in scantling for woodn truss and boarding complete as specified and directed 7 Fixing only second class hardwood (wrought) in scantling for woodn truss and boarding complete as specified and directed ( Note :- Timber shall be obtaind from item No -03 above) 8 S&F prepainted aluminium zinc steel sheet (galvalumebase) or thinknee0.50mmhaving tensile strength of 550 MPA , in colour and profile as apporved by GE and to be facotry moulded as in roof covering /cladding and fixed with hot dipped galvanished with high durable protective triple coated self tapping screws /self drilling serews, to suit the roofing in customizedcolour matching with the colour of roofing and screws are to be fixed using torque adjustable electronic gun screws drills of suitable capacity complete all as specified 9 S&F Pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to waall , fixed self tapping screwscomplete all as specified and directed. 10 Dismantling floor, hearth , wall tiling including taking down plastering in cement mortor removing serviceable tiles to store and rubbish off the premises 11 M&L for 25 mm thickPCC 1:2:4,type B-0 (using 12.5 mm graded stone aggregate) as in levelling course complete where required all as specified and as directed . 12 M&L Virified tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and hite or coloured cement to match in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match as in floor etc , all as specified. 13 -ditto- all as per item ser No 12 above here-in-before but in skirting/dado or verticle surfaces with back coat of screed bed or bedding layer of 10 mm thick 1:4 and pointed in white or coloured cement to match complete all as specified. 14 M&L Joint free Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified. 15 M&L Glazed coloured ceramic tiles in verticle surfaces 450 x 350 x7mm thickset and jointed in neat cement slurry and pointed in coloured cement to match with backcoat of screed bed or bedding layer 10mm thick 1:4 and pointed in white or coloured cement to match complete all as specified.. 16 Material & Labour for brick work with sub class `B’ bricks, straight on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. 17 Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) any thickness, including cover fillets but without frame work. 18 Supply & fixing of powder coatedGI snap grid frame work for false ceiling comprising of the following sections for making partitions of 605x605 mm size fixedto walls with rawl plugs & screws and hanged to roof with and including 2mm dia GI wire suspender of suitable length and butterfly clips, sizeof main tee shall be 37mmx24mmx0.3 mm thick , cross tee shall be 28mmx24mmx0.3mm thick and wall angle shall be 24mmx24mmx0.3 mm thick including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified complete all as specified and directed. 19 Supply & fixing 4mm thick non asbestos E-board classic cememt building board for insulation and accoustic purpose, 600 x 600 mm size fixed with staples on snap grid as in ceiling complete all as specified and directed. 20 Supply & fixing pvc panelling made up of pvc hollow panels 25/30cm in width and 10cm thickness interlocking pattern of approved shed and design,fixed to wall for ceilling all as per the manufacturer instruction,fixed in repair ceiling complete all as specified and directed. 21 Taking down chowkats or frames exc 1.50 sqm but n.exc 4.00sqm each with shutters (without taking off shutters from the frames) complete.. 22 Supply and FixedPressed steel frames for doors with one or more rebates including necessary fixing lugs hinges ,lock stike plate etc, size 125 X 60 mm complete as specified. 23 Supply and FixedPressed steel frames for doors with one or more rebates including necessary fixing lugs hinges ,lock stike plate etc, size 105 X 60 mm complete as specified. 24 M&L providing cement concrete (1:3:6) type C1 for filling in pressed steel frames and other similar items etc complete. 25 S&F 30mm thick Flush shutters with/without peep hole/vision panel, solid core construction, with block board core and plywood face panels, commercial type on both sides, both face are covered with decorative face veneer with lipping/frame to match all as specified and directed. 26 S&F35mm thick second class hard wood,Glazed andskeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars),edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified inSSR Part I, Section 8, clause 8.24(a); supplied and fitted to chowkats complete all as specified and directed by Engineer-in-Charge. Glass or wire cloth, etc. in panels or sash squares shall be measured separately 27 Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin VC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). 28 Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. 29 S&F 150mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed 30 S & F 250 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed 31 S&F 150 mm long Extruded brass handles, fabricated type polished 32 S&F in repair 150 mm floor door stopper of brass body and tonuge ,anodised, with hard drawn steel spring fixed in floor. 33 Supply & fixing Butt hinges, extruded brass, with mild steel hinge pin, bright pol ished and fixed, type B-11 of 100mm long complete all as specified and directed. 34 S&F 300 mm ordinary rat rail rod pattern springs,including rollerand roller plate mild steel fixed with screwes wooden frameandwelded to iron frame. 35 S&F in repair Aluminium (Extruded section body) Door closer hydrau lically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and directed 36 S&F in repair 20mm dia Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed. 37 S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed 38 Taking down chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete. 39 S&F three track aluminium powder coated sliding window with three sliding shutter, the size of outer frame three track 100 x 37 x 1.50mm (using two track for glazed window shutter and one track for wire gauged), the section shutter size 37 x 18 x 1.2mm) and glazing with 5 mm thick transparency glass of poly carbone including all around suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed on aluminium flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers sliding rollers of nylon with including all necessary fittings complete all as specified and directed. 40 Taking up or down GI Water Tubing 15mm dia (bore) including Connections and Fittings, segregating serviceable Pipes & Fittings and Stacking properly at Site(s) for re-use, complete all as specified and as directed. 41 -ditto- all as per Item No. 40 here–in–before, but for 20mm dia (Bore). 42 -ditto- all as per Item No. 40 here–in–before, but for 25mm dia (Bore). 43 Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed. 44 -ditto- all as per Item No. 43 here–in–before, but for 20mm dia (Bore). 45 -ditto- all as per Item No. 43 here–in–before, but for 25mm dia (Bore). 46 S&F in repair China clay table top WHB of make Jaguar Cat Part No-ARS WHT-39903 of size 700x435x135 mm incl waste coupling Cat Part No:-ALD-727 or equivalent in Hindware/Cera/ Parryware 47 S&F in repair 15 mm Brass CP Bibcock with flange of make Jaguar Cat Part No: OPP-15037PM or equivalent in Marc/Prayag/Parryware 48 S&F in repair15 mm Single Lever Basin Mixer without Popup Waste with 450mm Long Braided Hoses of make Jaquar Cat Part No: KUP-35011BPM or equivalent in Marc/Prayag/Parrywarecomplete all as specified . 49 S&F in repairCP single lever wall mixer 3-in-1 system with provision for bath hand shower & overhaed shower complete with 115 mm long bend pipe connecting legs & wall flange (without hand & ober head shower) of make Jaguar cat part No OPP-15125PM or equivalent in Marc/Prayag/Parrywarecomplete all as specified . 50 S&F in repair CP Hand shower 24x24 mm sqaure shape single flow with Air effect (ABS body face plate chrome plated) with Rubit cleaning system of make Jaquar cat part No-HSH-35537 with flexible tube in chrome finish 1.5 m long with nuts of make Jaquar cat part No SHA-571or equivalent in Hindware/Prayag/Parrywarecomplete all as specified and directed. 51 S&F in repair CP over head shower square shape of size 150x150mm of make Jaquar cat part No OHS-CHR-1619 with CP shower arm of size 400x25x25 mn Square shape for wall mounted showers flange of make Jaquar Cat partNo-SHA-455L400 or equivalent in Hindware/Prayag/Parrywarecomplete all as specified and directed. 52 S&F Soap dish holder of make Jaguar Cat Part No:-AKP-35731P or equivalent in Marc/Prayag/Parrywarecomplete all as specified and directed. 53 S&F in repair Toilet roll holder with stainless steel flap of Make Jaguar Cat Part No:AKP-35753 PS or equivalent in Marc/Prayag/Parrywarecomplete all as specified and directed. 54 Supply & Fixing in repair Corner glass shelf with bracket of make Jaguar Cat Part No:CAN-1173or equivalent in Marc/Prayag/Parrywarecomplete all as specified and directed. 55 Supply& Fixing in repair Towel ring square shape stainless steel of Make Jaguar Cat Part No : AKP-35721P or equivalent in Marc/Prayag/Parrywarecomplete all as specified and directed. 56 S&F in repair Vitreous China EWC single peace with UF Soft Close Slim Seat Cover, Fixing Accessories, Accessories set and Cistern Fittings, Size: 370x670x720 mm, S Trap-300mm complete of make Jaguar Cat Part No:- LYS-WHT-38851 series or equivalent in Cera/Parryware/Hindwarecomplete all as specified and directed. 57 Supply & fix in repair 15 mm bore brass CP health Foucet cock with Flexible pipe 1 m long of make Jaquar Cat Part No:ALD-565 or equivalent in Marc/Prayag/Parrywarecomplete all as specified and directed. 58 S&F in repair Stop valves,15mm fancy type, chromium plated with long shank andcup (concealed type) cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed 59 S&F in repair Angle Cock,15mm fancy type (2 in1 type, where required), chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. 60 S&F in repair 600x 450mm beveled edge mirror or selected quality glass mounted on 6mm thick AC bldg board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers. 61 S & F in repair Stainless Steel grating 100mm dia complete all as specified. 62 S&F in repair PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed. 63 S&F in repair PVC Connections 600mm long complete all as specified. 64 Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar workconforming to Fe.290.Gde-E-165 65 S&F in repair vanity cabinet with wash basin Owing to the high quality HDHMR Board with a gloss finishtable topof size 600mm x 450mm x 150mm,any shape and colourincluding PVC waste pipe 32mm dia, single leverbasin mixture ,waste coupling brass chromium platedcomplete all as specified and directed. 66 Material and labour for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces using WPC where ever requiredas per manufacturerers instructions and finishing the surface even and smooth (without using extra cement) etc. incl finishing even and faircomplete all as specified NOTE -WPC shall be measured and paid separetely. 67 M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and fair without using extra cement complete. 68 Supply only WPC complete all as specified and directed. 69 M&L for applying two coats of synthetic eneamel painting over a coat of pink primer on new wooden surfaces exc 10 cm width or girth including preparation of surfaces complete. 70 M&L for Preparing newly plasteredsurfaces and applying two coat of oil bound distemper over a coat of primer to wall to complete all as specified and as directed, 71 Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over any surfaces. Makes :- Nerolac -Excel, Asian - Apex, Berger - Weather coat antidust, Dulux - Weather shield. 72 Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) 73 S&F Mild steel sheet eaves gutters thickness of sheet 1 mm and dia 100mm, galvanised class 3, half round with rounded edge including brackets, heads, shoes etc complete all as specified and directed by Engineer-in-Charge. 74 S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge. 75 S&F 110mm PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge. 76 Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level). 77 M&L for 75mm Cement concrete Type C-2 1:3:6 (40mm graded aggregate) for plinth protection complete all as specified and directed by Engineer -in-Charge. 78 Dismantling water tanks of capacity exc 500 but n.exc 1000ltrs complete. 79 Supply & Fixingrotational moulded polythene water storage tanks tripple layer(cylindrical vertical with closed top) hoisted and fixed in postion 1000 ltrs capacity with and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed. 80 Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. 81 M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. 82 Material & Labour for factory made precast (Rubber moulded) concrete designer chequered tiles any colour, shape and size not less than 20 cm x 20 cm x 25mm thick(compressive strength not less than 250 Kg/Sqm), set, jointed and pointed with grey cement and pigment over and including 20mm thick CM 1:6 screed bed or bedding layer complete all as specified and directed. 83 M & L forPCC 1:2:4type - B0 (using 12.5 mm graded crushed stone aggregate), as in coping, kneelers, perapets, apex stones and similar works incl necessary formwork complete all as specified directed by Engr-in Charge. 84 M&L for PCC 1:3:6 type C-2 (40 mm graded aggregate) as in surface channels and drains including form work. 85 Extra for forming fair finished drain or channel 50 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed. 86 Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for foundation or manholes etc., and area n.exc. 10 Sq.m on plan and getting out in any type of soil (Hard/soft). 87 Demolition and breaking up drain pipes (SGSW, AC or RCC) of internal dia 150mm, set in cement mortar complete. 88 M&L for cement concete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes of 160mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed. 89 Material and labourunplasticised PVC pipe 160mm dia type B with wall thickness 4mm (Min) of pressure rating 4 KN/Sqm laid in trenches and jointed with cement solvent including testing complete all as specified and directed. 90 Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concret 1:2:4 type B-1 smooth finished, and reforming benching as required, for internal dia of pipe 160mm complete all as specified and directed. 91 S&F in repair75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed ncluding necessary fittings like socket, bend, elbow, single/double tee etc in any length with rubber ring joints fixed with clamps of flat iron and including bolts and nuts and securing ends of stays to wall or roof and making good with cement mortor 1:3 or with PCC 1:2:4 complete all as directed. 92 S&Fixing in repair110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed ncluding necessary fittings like socket, bend, elbow, single/double tee etc in any length with rubber ring joints fixed with clamps of flat iron and including bolts and nuts and securing ends of stays to wall or roof and making good with cement mortor 1:3 or with PCC 1:2:4 complete all as directed. 93 Returning, filling in with approved soil obtained from excavation including spreading levelling, watering and well ramming in layers n.exc. 25cm thick. 94 Removing the excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point. 95 Demolition of cement(Rainforced) Concrete of any description and in any position not other wise specifically provided 96 M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) for manhole cover septic tank covers slabs etc including necessary form work and set in CM (1:4). Note:- reinforcement will be measured and paid seperately. 97 M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. 98 M & L brick work with sub class B bricks straight or curved on plan exc 6M mean radius built in CM (1:4) as in manhole, septic tank, filter bed, wall and out let drain etc. 99 M & L PCC (1:2:4) type-B0 using (12.5 mm graded stone aggregate) for benching coping etc incl necessary form work. 100 Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed 101 M&L for Framed work as in doors or gates of Fe-290 (Gde E 165) angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, tc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed 102 Demolition of brick work/stone/boulder masonry, built in cement mortar incliding all quoins arches pillars, etc, but excluding ashlar facing , dressed stne work and precast concrete articles. 103 M & L for walling of random rubble stone masonry uncoursed well bounded badded and solidly hearted built in CM 1:6 brought upto course complete all as specified and directed by Engineer-in-Charge. 104 Ditto all as per item no 103 above but except stone. 105 Extra over stone walling for hammer dressing to face stone and dressing face beds and joints as specified of random rubble walling uncoursed or brought upto courses surface n exc 40 mm of Granite or Trap stone. 106 M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:4 complete. 107 M&L for raised pointing in CM 1:4 including Raking out joints/poiting to random rubble or polygonal rubble uncoursed or brought up to courses work built in cement mortar complete all as specified. 108 M & L forPCC 1:2:4type - B1 (using 20 mm graded crushed stone aggregate), as in plinth course, Parapets and railing up to 60 cm hight, coping, kneelers, apex stones and similar works incl necessary formwork complete all as specified directed by Engr-in Charge. 109 M&LMachine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match as in floor etc , all as specified. 110 -ditto- all as per item ser No 109 above here-in-before but in skirting/dado or verticle surfaces with back coat of screed bed or bedding layer of 10 mm thick 1:4 and pointed in white or coloured cement to match complete all as specified. 111 Taking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etc as in internal and external surfaces of man holes, septic tank, filter bed etc incl removing of debrie 112 S&F in repair 600x 450mm beveled edge mirror or selected quality glass mounted on 6mm thick AC bldg board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers. 113 Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar workconforming to Fe.290.Gde-E-165 114 BOQ/Sch A E/M portionTaking down carefullyaluminium/copper wiring of any size (for light, fan, socket or power etc complete) including fixture and fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights etc and making good disturbed surfaces of wall, roof etc to match with existing surface. 115 Supply & Fixing point wiring for one light point/ fan / Exhaust fan (independent) point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS)PVC cable drawn into & including medium grade PVC conduit (not less than 20mmouter dia ) with all fittings and accessories fixed concealed(including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) andsunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washersincluding one continuous run of PVC insulated (green colour) 1.5 Sqmm multistrandedcopper conductor cable earth wire and connected to earth dolly complete all as specified and directed Note:- wiring shall be done in colour coding as directed by Engineer in charge. 116 All as per item No. 2 herein before but one socket outlet 5 Amps on the same board. 117 All as per item No. 2 herein before butone 3 pin socket outlet 5 Amps independent. 118 All as per item No. 2 above but with 2.5 Sq mm two single core and 2.5 Sq mm one single core as earth wire for 15 Amps socket. 119 S&F switch piono,flash type 5 Amp one way 120 S&F Socket outlet 3 pin, 5A, flush type 121 S&F switch piono,flash type 15 Amp one way 122 S&F Socket outlet 3 pin, 5A, flush type 123 S&F ceiling rose surface bakelite3 terminal with base plate. 124 Supply and fixing LED lights fitting 1x 20W (warm/milky white as required on site), 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and life of tube light not less than 50,000 hours.completeall as specified and directed..Make Havells cat pat LUMILINEBS20WLED865SPCWH or equivalent of phillips/wippro/Bajaj/Surya complete Note:- LED tube light shall be purches to get minimum 2 year warrenty of material from manufracturer. 125 S&F lamp holder (modular type) PVC insulated body with back plate for angle/battern fitting with and including one No 10 watt LED lamp all as specified and directed. 126 Supply & Fixingsheet metal enclosure forSPN DBs (double door type) Single pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed . 127 Supply & Fixing 240V, 10KA C curve miniature circuit breaker (MCB) of SPN 40 to 63 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed . 128 Supply & Fixing 240V, 10KA B curve miniature circuit breaker (MCB) of single pole 5 to 32 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed . 129 Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVCinsulated aluminium Stranded conductor served with aninner sheathing of PVC tape armoured with galvanised steel wire or tape and overallPVC sheathed 6 sq. mm 2 core nominal cross section inservice connections 130 Excavation in trenches not exceeding 1.5 mtr wide, depth exceeding 1.5 mtr and getting out in hard/dense soil complete all as specified and directed by Engineer-in-charge 131 Returning, fillingincl spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil all as specified and directed. 132 Removing excavated material (soil) not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above thestarting point complete all as specified and directed. 133 M&L for dry clean sand filling in trenches below and around under ground cable cushioning complete all as specified and directed.. Note :-Thickness of sand cushioning shall be measured after punning. 134 M&L for brick sub class B for protection of cable comlete all as specified and directed. 135 M&L for Earthingcomplete with galvanized sheet earthplate electrodes 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2. 25mtr deep below ground level) with top edge of plat not less than 1.5 mtr below normal ground level connected to galvanized iron strip 25 x 4 mm as earthing lead by means of bolts, nuts , check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3and including excavation and earth work, GI pipe light grade 15 mm bore for protection of GI wire from earth electrode to and incl the earth test point of galvanized Iron/steel of size 75x75x 25mm,supplying and laying charcoal dust, common salt, PCC 1:2:4 typeB1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced with 6 mm dia TMT bars @ 75mm C/C both ways with MS handle 12mm dia, PGI funnel and wire mesh,20 mm dia GI pipe light grade for wateringand connected to earth test point including brazing at all joints except at test point and testing complete all as specified and directed by Engr-in-Charge. 136 S & F LED light fitting 1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Make : Havells cat pat HEXAFT10WLED857SSYMBOPC or equivalent cat part in makephillips/wippro/Bajaj & C&S .Note:- Contractor shall submit 2 year warrenty of material from manufracturer alongwith purchase voucher. 137 Supply and Fixing steel tube Light grade galvanised 50 mm bore with all fittings for protection of UG cable under road/culvert and fixing on wall with saddle, screw complete all as specified and directed. 138 Supply and fix in Decorativeenergy savinglong lifewall mounted type 01x15 watt LEDsecurity light fittings made up of pressure Die cast aluminium housing with high efficient LEDas lighting source and PC cover having top openingsepratedriver compartment with IP 66 Protection and impact resistance of IK07 and cast aluminium pipe mounting attachment and accessoriesincluding40mm dia light grade GI pipe bracket of length not less than 1.5m bent to shape, clamps, nut, bolts etc all as per cat ENDURAPEARLSL15WLED757SASYTOPCMP HSN CODE 9405ofHAVELLS make or same type of model of makes specified.
