|
| 1 | Construction of PDS Building (Type-II) at Itchikkottai in Madhagam Panchayat |
| 2 | Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth,earth mixed with small sized boulders and hard gravelly soil as per SS 20B |
| 3 | Collection and supply of M.Sandand filling in to the basement including cost and conveyanceto the site and all labour charges for filling as per standard speecifications |
| 4 | Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc completefor 10 cum. |
| 5 | Filling with Conveyed Earth including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc completefor 10 cum. |
| 6 | Reinforced Cement concrete 1:1.5:3mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc completefor 10 cum. |
| 7 | Supplying and erecting centeringshuttering includingnecessary supportsforplane surface infoundationandbasementandinallfloorsforR C Ccolumn footing supported by casurina props of 10cm to 13cm dia spacedat 75cmcentretocentrecolumn plinth beam, beams, roof slabs, staircase steps, bed blocks, criticalpier etc using mild steel sheets of size 90 x 60 cm and 10 guagestiffened, weldedwithmild steel angles ofsize25mmx25mmx3mmforboardinglaidoversilver oak(country wood) scantlings of size 10cm x 6.5cm spacedof about 90cm centretocentreand complete complying with standardspecificationsandasdirectedbydepartmental officers including conveyance of all materials to site and proper centering etc complete. |
| 8 | Supplying and fabrication of steel including cost and conveyance of steel to site and all labour charges for straightening, cutting to length,bending to shape and tying in position and forming grills for all R.C.C works |
| 9 | Brick work in cement mortar 1:5 mix using country bricks 83/4\"x43/8\"x23/4\"and conveyance of all materials to site and all labour charges etc complete -10 cum |
| 10 | Manufacturing Supplying and fixing of Steel Door with the following Specification MS angles of size 40x40x6mm are used for the outer frames and M.S.Angles of size 35x35x6mm for the shutter frames stiffeners with 32x6mm M.S.flat is provided at required intervals in the shuuter frameincluding cost and conveyence ofall materials to site and all labour charges etc complete -10 sq.m |
| 11 | Rolling Shutter |
| 12 | Door |
| 13 | Supplying anf fixing in Position of Steel Sheeted window (Two Leaves) with the following specifications, Outer frames of windows made of \"Z\" section F7D of size 33x25x3mm at 1.419kg/m and mullion \"J\" Sectionincluding cost and conveyence ofall materials to site and all labour charges etc complete -10 sq.m |
| 14 | Supplying anf fixing in Position of \"N\" type Ventilators using M.S.Angle of size 25x25x5mm for frame and M.S. Flat of size 20 x 3mm for fixing the weld mesh and using 25 x 22x3mm \"T\" Section for frame glass including cost and conveyence ofall materials to site and all labour charges etc complete -10 sq.m |
| 15 | Supply and fixing of Cuddapah Slab including cost and conveyance of all materials to worksite and all labour charges etc., complete |
| 16 | Plastering with cement mortar 1:3 mixto 10 mm thick including cost and conveyance of all materials to site and all labour charges etc complete -10 sq.m |
| 17 | Plastering with cement mortar 1:5 mixto 12 mm thick including cost and conveyance of all materials to site and all labour charges etc complete -10 sq.m |
| 18 | Providing Granolithic Pattern Floor finish with plain cement concrete 1:2:4 using 10-12 mm ISS HBG metal and top rubbed smooth etc., complete complying with standard specification as directed. |
| 19 | Paving the Floor with scratch proof ceramic tiles of size 305x305x6mmincluding cost and conveyance of all materials to site and all labour charges etc complete |
| 20 | Dadooing of walls with colour glazed tiles of size 300x200x6 mmof best quality including cost and conveyance of all materials to site and all labour charges etc complete |
| 21 | Finishing the top of the roof with one course of Machine Pressed Tilesof size 20 cm x 2 cm of approved quality laid in CM 1:3 (One cement and three sand) 12 mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar, red oxide, etc., complete complying with standard specification |
| 22 | White washing 2 coats with shell lime including cost and conveyance of all labour charges etc., complete. |
| 23 | Distembering two coats with best approved colour withPrimingCoatover the new plastered surface including cost and conveyance of all materials to site and all other labour charges etc complete.For INNER WALL |
| 24 | Paintingtwo coats of newly plastered wall surface with ready mixedPlastic Emulsion Paint of First qualityof approved colourover aPrimingCoatincluding thorough scrapping , clean removal of dirt and including necessary plaster of paris putty wherever required etc, complete complying with standardspecification(including primer).For OUTER WALL Surface. |
| 25 | Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete |
| 26 | Supply and run of 2 of 6 Sq.mm (84/0.30) polythene insulated PVC sheathed heavy duty SC Copper conductor of 1100 V grade on 7/20 GI bearer wire for service connection mains (SD No.64) |
| 27 | Supply and run of 2x4 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class \"B\") suitably bent at both ends with necessary angle iron upright and end supports for mains. (SD 69) |
| 28 | Supply and fixing of4\"-18WLED with fitting including all cost and conveyance to worksite etc., complete |
| 29 | Wiring 2 x 1.5 sq.mm (22/0.30)PVC insulated unsheathed SC.cu.conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with in flush with wall covered with hylem sheet of 3 mm thick with painting of suitable colour for concealedPVC light/ fan point (SD No.25) |
| 30 | Light Point |
| 31 | Fan Point |
| 32 | Wiring 2 x 1.5 sq.mm (22/0.30)PVC insulated unsheathedSC.cu. conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with in flush with wall covered with hylem sheet of 3 mm thick with painting of suitable colour for concealedPVC plug point (SD No.38) 5 pin plug point |
| 33 | supply and fixing of 1200mm sweep AC ceiling fan complete with stepped electronic regulator with 300mm down rod on the existing clamp SD 106 |
| 34 | Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1\" x 1/8\" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. (SD No. 125) |
| 35 | Supplying & Fixing in positionof European Water closet ofapproved quality etc., complete |
| 36 | Supplying & Fixing in 110mm dia PVC Pipe 6 Kg per CM2 for Stonewere etc., complete |
| 37 | Supplying & Fixing in 500 Lr Capacity HDPE Tanketc., complete |
| 38 | GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column \"BB\" for all works in this package}(Refer Clause 1 & 37 of Section 2 of Instruction to Bidders (ITB) of SBD) |
