maintenance and repair to NRB @ Udyog Sarathi Bldg…. Providing misc. Repairs to the Jt. CEO-3 Cabin at Udyog Sarathi Building, Andheri (E), Mumbai=2 Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. (Rate excluding GST) 3 Removing wooden, glass or A.C. partition including frame work and stacking the materials as with all leads, lifts etc. complete. (Rate excluding GST) 4 Removing false ceiling in all types of ceiling i.e. Gypsum, Accoustical, Calcium silicate board, metal etc. including stacking the materials as directed with all leads & lifts. (Rate excluding GST) 5 Dismantling Brick Masonry in lime or cement mortar and stacking the material as directed with all leads & lifts complete. (Rate excluding GST) 6 Removing cement tiles, or marble or polished shahabad floor or dado or platform without bed concrete including stacking the materials as directed with all leads, lifts etc. complete (Rate excluding GST) 7 Dismantling old electrical fixures of all types i.e. switch boards, lights, smoke detectors etc. including its wiring and stacking of serviceable material and disposal of unserviceable material with all lead and lifts. (Rate excluding GST) 8 Dismantling old sanitary fixures of all types i.e. W.C., urinals, wash basin etc. including its pipes and stacking of serviceable material and disposal of unserviceable material with all lead and lifts. (Rate excluding GST) 9 Dismantling and removing the existing fixed and loose furniture etc. including tables, chairs, fixed and loose storage etc complete and stacking of serviceable material and disposal of unserviceable material with all lead and lifts. (Rate excluding GST) 10 Providing and laying 4 mm to 6.5 mm thick SPC / PVC plank flooring of approved make, made of 100% virgin PVC/ SPC backing with minimum 0.30 to 0.50 mm thick wear layer in required design and pattern in linear and curvilinear portions of the building. The planks are to be connected with glue free click connect joinery system and junction of the adjoining floors are to be finished with T or any other approved profile of aluminum/ wooden/ S.S. of approved make as per manufacturers specifications. The entire work is to be completed as per the direction of the EIC/Architect. (Rate excluding GST) 11 Providing and fixing of wooden flooring in cabin with heatlon and labour installation etc. complete etc. as per drawing and instructions from Engineer-in-Charge. (Rate excluding GST) 12 Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. 13 SE No. 2:- Plumbing Works 14 Providing and fixing 15 mm dia Piller cock with guarantee against any manufacturing defect including socket, union nuts etc. complete. As per direction of Engineer - in - Charge. (Rate Excluding GST) 15 Providing and fixing European type commode including outlet, inter connections through walls including all fittings, flush valve, flushing tank etc. complete. As per direction of Engineer - in - Charge. (Rate Excluding GST) 16 Providing and fixing Table top white wash basin of size 120x635x405mm rubber plugs and brass chain, C.P.Angular stop cock long thread, continental including S.S. bottle trap of approved make having necessary pipe connection up to theoutside face of the wall.etc complete as directed by Engineer in charge. (Rate Excluding GST) 17 Providing and fixing in position UPVC Nahani Trap including SS grating,fixing in cement concrete M-15 etc. complete. (Rate Excluding GST) 18 100 mm Dia 19 Providing and fixing Soap Dispenser with Glass bottle with all types of fixtures including labour charges including transport charges etc. complete. (Rate Excluding GST) 20 Providing and fixing 15 mm dia 2 Way BIB cock long body with flange, guarantee against any manufacturing defect including socket, union nuts etc. complete.As per direction of Engineer - in - Charge. (Rate Excluding GST) 21 Providing and fixing Jet Spray with guarantee against any manufacturing defect including socket, union nuts etc. complete.As per direction of Engineer - in - Charge. (Rate Excluding GST) 22 Providing and Fixing of Mirrors in Toilets of approved Indian quality, copper plated with 10 mm thick plywood backing in the masonry etc. complete.As per direction of Engineer - in - Charge. (Rate Excluding GST) 23 Supplying, Providing and fixing in position of approved make first quality, recessed, roller type or box type white glazed toilet paper holder with flap etc complete as per direction of Engineer - in - charge. (Rate Excluding GST) 24 Providing and fixing Chromium Plated Alluminium Towel Rail 750 mm (26) long, 20mm (3/4) dia and of approved quality fixed on chromium plared bracket including providing teak wood gutties in masonry etc complete as per direction of Engineer - in - charge (Rate Excluding GST) 25 Providing and fixing 15 mm dia Angle cock with guarantee against any manufacturing defect including socket, union nuts etc complete as per direction of Engineer - in - charge. (Rate Excluding GST) 26 Providing and fixing in position Double coat hooks as per instructions from EIC/Architect (Rate Excluding GST) 27 Providing and fixing in position Hand dyrer as per instructions from EIC/Architect (Rate Excluding GST) 28 Providing and fixing in position CP brass concealed stop-cock with adjustable wall flange etc., complete as per drawings and instructions of EIC/Architect. (Rate Excluding GST) 29 SE No. 3:- Painting work 30 Providing & Applying superior quality of Luster Paint of approved make & shade, using roller to get approved textured surface in 3 or more coats including preparation of surfaces, applying cement primer of approved make & shade etc. complete as per directions & manufacturers specifications & instructions of Engineer - In - Charge. (Rate Excluding GST) 31 Providing and applying plastic emulsion paint conforming to IS:5411-1991 part I of superior quality of approved make, colour and shade to the old & new surfaces in two coats over primers, including scaffolding, preparing the surfaces to receive the paint and applying putty etc. complete. (Rate Excluding GST) 32 Finishing with Multi surface Zinc paint After surface preparation applying one or more coats of zinc based coat comprising of Zinc powder mixed with suitable medium in proportion1: 2 (One part of medium : 2 parts of zinc powder)@ 2.5 litre/10 sqm or as directed by Engineer-in-Charge and one coat of special primer applied @ 0.75 ltr /10 sqm over zinc coat. Top layer with two or more coats of approved luster paint/multi surface paint @ 1.25 ltr/10 sqm including preparation of surface even and smooth etc complete as per direction of Engineer-in-Charge (Rate Excluding GST) 33 Providing and applying TEXTURED paint of approved colour & shade to old and new surface including scaffolding preparing the surface to finishing with 2 coats etc complete as per direction of Engineer - in charge. (Rate Excluding GST) 34 SE No. 4:- Carpentry Works 35 Providing and fixing in position Aluminium Frame Work of Square hollow sections of given size for partitions, paneling, boxing, soffits etc. with vertical & horizontal members at not more than 600 mm center to center. All complete including necessary additional supports, bracing, runner etc. so that lateral movement is arrested. as per instructions of Architect. Frame work will be measured and paid as per actual measurement on site. Rates quoted shall include the cost of providing and fixing supports up to ceiling. All complete as per detail drawing, as specified and as directed by Architect. (Rate Excluding GST) 36 Size 50 x 25 x 1.62 mm 37 Size 50 x 50 x 2 mm 38 Providing & Fixing in position on existing frame work including all materials, labour etc complete. Item to be completed in all respects as per drawings & instructions from Engineer - In - Charge. (Rate Excluding GST) 39 9mm thk marine ply 40 12 mm thk marine ply 41 19mm thk marine ply 42 Providing and fixing Gypsum board of 12.5mm thick including cutting, fixing and finishing as per engineer incharge, complete. (Rate Excluding GST) 43 Providing and fixing 3mm - 4mm thick group matching Decorative Veneer of approved quality and make, of required size and width as per site condition including surface preparation pasting with approved adhesive and finishing it evenly to get flat surface. The cost of openings for switches, AC Facia, any other cutout etc. shall be included in the rates quoted. complete as per detail drawing & directions by Architect. No extra payment will be made towards providing any pattern .The item includes finishing the surface with 3 or more coats of melamine polish as per the direction by Architect. (Rate Excluding GST) 44 Providing and fixing 1.5 MM thick group matching Laminate of approved quality and make, of required size and width as per site condition including surface preparation pasting with approved adhesive and finishing it evenly to get flat surface. The cost of openings for switches, AC Facia, any other cutout etc. shall be included in the rates quoted. complete as per detail drawing & directions by Architect. No extra payment will be made towards providing any pattern. (Rate Excluding GST) 45 Fluted panels Types-1 Providing Supplying and fixining WPC (Wood Plastic Composite) fluted panels are Various colour, Shape and Size as per the directions of the EIC/Architect. (Rate Excluding GST) 46 Providing & fixing in position 460 mm deep storage / Wardrobe unit along with partitions etc with 1) sides,top,bottom shelves made out of 19 mm marine plywood 2)6 mm thk. marine ply backing panels 3) Shutters made out of 19 mm thick block board & 6 mm thick teakwood leaping with egde moulding of approved profile if any shall be provided in all exposed ply edge surfaces & be finished with melamine polish / PU coating.4) Finish 1mm thk laminate inside & 4mm thk veneer out side as per below mention, hardwares such as heavy duty hinges of size 100 x 19 x 25 mm, brass body locks(Elpro make) with extra large group key of approved quality, magnetic ball catchers, handles of dia 12mm x 128mm, towerbolt 150mm etc. All exposed woodwork to be finished with 3 coats of melamine polish / PU coating & all internal surface finished with approved 1 mm thk laminate. All as per detailed drgs and instructions of EIC / Architect. Size in front elevelation will be measured for payment. (Rate Excluding GST) 47 Low height storage with Veneer finish (LST) 48 T.W MOULDING Providing and fixing in position mouldings out of T.W Moulding complete as per profile given in the detail drawing or as explained out of wooden sections of all sizes as per drawing and rerquirement. All should be finished with melamine polish of approved shade & color with minimum 3 coats. This item will operate only for those mouldings which are to be fixed independent of any other item as mentioned in the Bill of Quantities and not measured under any other item etc. complete as per detail drawing, as specified and as directed by Architect / Engineer (Rate Excluding GST) 49 SE No. 5:- Doors & Windows Works 50 Providing,Supplying and installation of UPVC sliding system with Brilliant White colour having L value of 96.5 higher and Titanium Dioxide content of at least 8 PHR (parts per hundred). Supplier must have own production facilities (extrusion & fabrication) & control the entire cycle from extrusion to manufacturing to installation. The outer frame should have a minimum depth of 70mm for 2 track and 128mm for 3 track. The sash (shutter) depth should be minimum 50mm. The face width of the sash should be minimum 70mm. UPVC profiles should have a minimum wall thickness of 2.3mm in the visible area. The profiles should be seamlessly Zip-welded without needing corner cleaning which eliminates weld-sprue cleaning marks on the edges for improved aesthetics and higher strength. The shutter profiles should have co-extruded TPE gaskets in the glazing area which are welded together preventing gaps being formed. The bead profiles should also have co-extruded TPE gasket. Shutters should have 2 layers of Siliconised Brush Seal with a central plastic fin. Fully toughened or Heat-strengthened coated glass ST 167 DGU 6-12-5 mm Glass . DGU 23 mm ST167 Glass of Saint-Gobain or equivalent which have clarity of 654 PP also properties as Visible Light Transmission (VLT) as 61 %, Light Reflection internal as 24 %, Light reflection External as 22 %,Solar Factor as 0.60. Handle must be SS 304 Crank or espag handle for better stablity & handling. Steel reinforcement should be minimum of 1.5mm thickness for shutters and 1.5mm for outer frames and having AZ70 AluminoZinc coating for higher corrosion resistance and approved as per structural calculations. Interlocks between the shutters should only be of anodised aluminium and hooking type. Interlocks should have woolpiles between shutters for better air/water/sound sealing. Woolpile should be siliconised with a central plastic fin. The rollers must be tested (Rate Excluding GST) 51 Providing and fixing best quality superior Indian teak wood frame for doors, windows and ventilators including all moulding, rebating, jointing, hold fasts of MS flats of minimum size 20 x 3 mm, having length of 225 mm for doors & 150 mm for windows and finishing with 3 coats of French polish or one coat of primer and synthetic enamel paint in two coats as directed etc. complete. (Rate Excluding GST) 52 Providing & fixing 35mm thk. Phenol bonded Flush door finish with one side 1.5 mm thk. Laminate and one side 3 - 4 mm thk Veneer as per approved pattern. All edges should finish with teak wood lipping with melamine polish. All complete as per instructions & approval of EIC. Note: The rate of all doors shall include all hardware such as door handles, hinges, door closures/floor spring, dead lock, PVC door buffer, door stopper, latches etc. as required. (Rate excluding GST) 53 Providing & fixing 35mm thk. Phenol bonded Flush door finish with 3 - 4 mm thk. Veneer on both sides as per approved pattern. All edges should finish with teak wood lipping with melamine polish. All complete as per instructions & approval of EIC. Note: The rate of all doors shall include all hardware such as door handles, hinges, door closures/floor spring, dead lock, PVC door buffer, door stopper, latches etc. as required. (Rate excluding GST) 54 Providing & fixing door in position Partly Glazed Partly Solid door made up Phenol bonded of 35 mm thk approved flush door of approved size & 12 mm toughened glass approved beading, grooves, approved moulding including necessary hardware, approved adhesive, fitting & fixture Handel, Lock, Floor Spring etc. melamine polish to all exposed surfaces etc complete as per detail drawing as specified & as directed by Engineer-incharge. (Rate Excluding GST) 55 Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. 56 SE No. 6:- False Ceiling 57 Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. (Rate excluding GST) 58 12.5 mm thk moisture resistance board 59 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceilinsection and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm or both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting. (Rate excluding GST) 60 Providing and fixing Wooden rafter at ceiling at all height including providing and fixing of aluminium frame work and rafter made up of ply using 9/12/19 mm with complete hardware fitting etc complete as per direction of Engineer - in - charge (Rate excluding GST) 61 SE No. 7:- Loose Furniture 62 Meeting Table in Veneer finish (Size 3300 X 1650 X 750MM) Providing and fixing in position Meeting Room Table of approved shape shown in drawing. Table top made out of 19 X 19 mm & 50 X 38 mm T.W. frame work with both side 6mm thk marine plywood in two layers finished with approved veneer. Apron made out of 50 X 50 mm T.W. frame work with both side 9 mm thk marine plywood finished with approved Veneer. Edge of Table finished with 50 X 50 mm T.W. moulding with melamine polish. Footrest & skirting made out of 19 mm thk marine plywood finished with approved Veneer. Edge of footrest finished with 25 mm thk wooden half round moulding with melamine polish. 50 x 50 mm wooden connecting members. Rate including cost of wooden beadings, mouldings, inlays, etc. Top should be finished with approved Veneer. Sides finished with approved veneer & melamine polish. complete as per detail drawing, as specified and as directed by Architect. (Rate excluding GST) 63 Meeting room/conference chair Providing and placing in requireed position Godrej make Kareena Mid Back Chair 9PO2AX or approved equiivalant make chair of size 50.0cm W X 49.5cmH with 75.o cm D including necessary approved typeLeather Finish, with base frame S.S. finish complete as per manufacturer specifications and as per instruction of Engineer in charge. (Rate excluding GST) 64 Square / Circular Corner Table Providing & arranging in position corner table out of 2x2 T W members with proper joinery & hardware as per approved drawings. The top to be finished with 12mm thk. tinted glass top with bevelled edges. Item to be completed in all respects as per drawings & instructions from EIC/ Architect. Size of table:(450 X 450 X 450 mm) (Rate excluding GST) 65 Square/Circular Corner table Providing & arranging in position corner table out of 2x2 T W members with proper joinery & hardware as per approved drawings. The top to be finished with 12mm thk. tinted glass top with bevelled edges. Item to be completed in all respects as per drawings & instructions from EIC/ Architect. Size of table:(750 X 750 X 450 mm) (Rate excluding GST) 66 SE No. 8:- Chairs And Sofa Works 67 Executive Chair Providing and placing in requireed position Godrej or equivalent make Halo very High Back Chair Model PCh- 9200R or approved equiivalant chair of size (49.0cm. (W) X 48.0cm. (D) with 75.o cm (D) including necessary approved type Leather Finish, with base frame S.S. finish complete as per manufacturer specifications and as per instruction of Engineer in charge. (Rate excluding GST) 68 Executive Visitor Chair Providing and placing in requireed position Godrej or equivalent make Halo Mid Back Chair Model PCh- 9200R or approved equiivalant chair of size size 50.0cm W X 49.5cm (H) with 75.o cm (D) including necessary approved type Leather Finish, with base frame S.S. finish complete as per manufacturer specifications and as per instruction of Engineer in charge. (Rate excluding GST) 69 Staff Chair Providing and placing in requireed position Godrej make Bravo mid Back 9U02RX or approved equiivalant make he seat and back are made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE: 47.5 cm. x 58.0cmH SEAT SIZE: 47.0 cm. W x 48.0 cm. D (Rate excluding GST) 70 Providing & supplying multi seater sofas with teakwood internal frame out of size min. 70x40mm as mentioned in drawing with necessary spring /rubberised coir/32 density polyurethene foam/100% latex rubber foam of appropriate quality & thickness as shown in the drawing with melamine polish on all exposed wooden surface. 75mm thk. for seat & 50mm thk for back. 25mm polyurethene in it to give required shape. The rate to include upholstry material of approved velvet(fabric) on outer side & on the inner side white cloth of approved qulaity shade etc. The contractor shall use appropriate size of frame work instead of mentioned to achieve desired shape & comfort as shown. All as per instructions of Engineer-incharge. (Rate excluding GST) 71 Single Seater Sofa Fabric finish. 72 Two Seater Sofa Fabric finish. 73 Three Seater Sofa fabric finish. 74 SE No. 9:- Miscellaneous Works 75 Supplying, Providing & fixing in position of required size pelmets / jamblining made out of 19mm thick marine plywood finished with approved finish mention below and 3 coats of French polish for inside surface as per the direction by Architect. Item to be completed in all respect as per the drawing & instruction from Architect. (Rate excluding GST) 76 Providing and fixing in position 19mm thk. Marine plywood for soffit finished with below mention including 25 x 25mm thk 2nd class TW wooden frame work (including paint)/ supports & mouldings, groove. Item to be completed in all respects as per drawings & direction by Architect. (Rate excluding GST) 77 Providing and fixing in position 12mm thk soft board panelling with approved adhesive, partition surface including fabric cover, wood beading finished with melamine polish of approved shade etc. complete as per drawings & directions by Architect. (Rate excluding GST) 78 Providing & arranging in position dust bins out of perforated (min Size 350 mm dia x 400 mm Height). Item to completed in all respect as per drg & directions. (Rate excluding GST) 79 Zebra-Blinds Providing & fixing roller blinds with Partily Sun screen/Blackout fabric any color - Providing and installing with all fixing accessories, washable and stain resistant Roller type Window Blinds system premium grade 100% Polyester & recyclable fabric roller sheet avg. 0.4 mm thk. of max. 2.5 mt., fluidly rolling over coil rod fixed at Pelmet level. Avg. height of system to be 1400 mm; item inclusive of all metal alloy head track, pull-cords and accessories for full operation etc. installed complete, including avg. 3 mm thk. Powder coated extruded Aluminium section Pelmet avg. 25 mm x 50 mm section to approved colour inclusive of all fixing brackets screw holes etc. to approved colour; with men material and lift up to 20 mt. and getting mock-up approved by Architect for 1 unit installation. Fabric to be 100% Polyester, PVC free, of avg. 0.4 mm thickness, weight avg. 160 gm/sqm. Basic Price of Roller Blinds as per approval from Architect. Providing & fixing roller blinds with Partily Sun screen/Blackout fabric any color - Providing and installing with all fixing accessories, washable and stain resistant Roller type Window Blinds system premium grade 100% Polyester & recyclable fabric roller sheet avg. 0.4 mm thk. of max. 2.5 mt., fluidly rolling over coil rod fixed at Pelmet level. Avg. height of system to be 1400 mm; item inclusive of all metal alloy head track, pull-cords and accessories for full operation etc. installed complete, including avg. 3 mm thk. Powder coated extruded Aluminium section Pelmet avg. 25 mm x 50 mm section to approved colour inclusive of all fixing brackets screw holes etc. to approved colour; with men material and lift up to 20 mt. and getting mock-up approved by Architect for 1 unit installation. Fabric to be 100% Polyester, PVC free, of avg. 0.4 mm thickness, weight avg. 160 gm/sqm. Basic Price of Roller Blinds as per approval from Architect. (Rate excluding GST) 80 Providing, fixing, applying by Company Trained Technicians, premium Wall Covering (Wall Fabric), as per details in attached specifications, or as per detailed specifications and colours attached, or approved equivalent, of approved colour, texture and design, including base and sub-base preparation(on top of existing P.O.P surface), all complete, in a neat and workman like manner, as per directions of Engineer-In-Charge. (Rate excluding GST) 81 Providing & fixing Artificate like Artifical Plant, Picture Frame etc. as per shown in drawing & manufacturers specification (Rate excluding GST) 82 Frosting Film Providing & fixing 80 micron (minimum) thick non reflective, matte, frosted, scratch resistant, high performance resin coated polyster film with required frosting pattern on the glass surface complete as per direction of EIC/Architect. (Payment shall be made for the finished area of the film actually provided. No deduction shall be made for openings up to 0.10 sqm area each and nothing shall be paid extra for making such openings). 3M Dusted film of series 7725-314 / Llumar Dusted NRM WH PS 2 or approved equivalent (Rate excluding GST) 83 Providing & Fixing of 6mm thk Corean Table Top with polishin of Approved make and colour as directed by Engineer in Charge. (Rates excluding GST) 84 SE No. 10:- Electrical Works 85 Point Wiring (WG-PW) 86 Point wiring for independent plug in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification no. WG-PW/SW 87 Secondary point wiring for additional light/bell point, concealed type in min 20 mm PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification no. WG-PW/CW 88 Accessories for Indoor Fittings (FG-AS) 89 Supplying and erecting luminous / modular type call bell indicator with plastic body, heavy duty coil and indicator lamp working on 230V A.C. supply with resetting arrangement complete erected on double wooden / sunmica board. 90 Indoor LED Fittings (FG-IDF/LED) 91 Supplying and erecting LED square / circular Max. 18 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B0 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED. 92 Supplying and erecting LED Panel Light (600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED. 93 Supplying and erecting LED Strip light Max. 95 W IP20 class having minimum lumens output of 1600 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, operating range of 230-270V, Life class of 30,000 Hrs at L70B50 including driver with minimum 1 year warranty as per specification No. FG-IDF/LED. 94 Modular switches and Accessories 95 Supplying and erecting modular type T.V. socket single outlet on provided plate and box with wiring connections complete. 96 Supplying and erecting modular type telephone socket one gang with safety shutter on provided plate and box with wiring connections complete. 97 Supplying and erecting modular type computer Jack RJ 45 with safety shutter, on provided plate and box with wiring connections complete. 98 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. 99 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. 100 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. 101 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. 102 Supplying and erecting modular type 3 pin 6A multi socket with safety shutter on provided plate and box with wiring connections complete. 103 Supplying and erecting modular type 3 pin 6/16A multi socket with safety shutter on provided plate and box with wiring connections complete. 104 Supplying and erecting modular type blanking plate one module, on provided plate & box. 105 Supplying and erecting modular type switch 6A/10A on provided plate and box with wiring connections complete. 106 Supplying and erecting modular type switch 16A on provided plate and box with wiring connections complete. 107 Bunch of Wires (WG-MA/BW) 108 Supplying & erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-MA/BW 109 ELV Cabling (WG-ELVC) 110 Supplying and installing FR PVC sheathed HDPE insulated copper cat-6A cable suitable for networking compliant with ANSI/TIA-568.2-D standards in provided conduit/ casing-n-capping as per specification no. WG-ELVC/NC 111 CCTV Systems (CCTV) Cameras (CCTV-CAM) 112 Supplying & erecting 43 professional LED display with 1920*1080 (Full HD) Display, suitable for 16/32 channel NVR and following features Brightness: minimum 500 Cd/m2 Contrast Ratio: minimum 1000:1 Viewing angle: 178/178 deg. Response time: maximum 8 ms Inputs: HDMI, VGA, BNC,USB, Audio In, Built-in speakers maximum 10 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete as per specifications no. CCTV-MON 113 Supplying & erecting 55 professional LED display with 1920 *1080 ( Full HD) Display, suitable for 32/64 channel NVR and following features Brightness: minimum 500 Cd/m2 Contrast Ratio: minimum 1000:1 Viewing angle: 178/178 deg. Response time: maximum 8 ms Inputs: HDMI, VGA, BNC,USB, Audio In, Built-in speakers maximum 10 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete as per specifications no. CCTV-MON 114 SE No. 11:- HVAC Works 115 Air Conditioners (AP-AC) 116 Supplying, installing, testing & commissioning cassette type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor room air conditioning unit 1.3TR to 1.7TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32/R410A having copper condenser, dust filter, self diagnosis feature, stabilizer free operation, noise level maximum 50dBA at position as per specification no. AP-AC/ WAC 117 Drain piping: Providing and fixing of 25mm Dia Hard PVC drain water piping with fittings, support and insulated with 6mm thick closed cell elastomeric nitrile rubber insulation complete as per specifications 118 Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV (control cabling) 119 Supplying, erecting, testing & commissioning fresh air intake system, ductable circular inline fresh air fan inlet unit having 300cfm capacity with maintaining the static pressure minimum 20mm suitable to operate on 1 phase, 230V, 50Hz, A.C. supply complete. 120 Supplying and installation of high pressure grade required size copper connection Y or T- Joints/refnet complete erected on wall/ceiling with supports/raceways, Nitrile rubber insulation, painting etc. with brazing and testing for leakages confirming the normal operation of the VRV/VRF air conditioning system. 121 Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 34.9mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra viole 122 Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 19.1mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete 123 Outdoor Stand Fabrication for Outdoor Split Units: Supply, fabrication and erection of Angle/channel/Flat iron stand, hanging arrangement for air conditioning machines including nut bolts of required size, making holes, fabrication, welding, cutting, etc. and painting with one coat of red oxide paint & two coat of enamel paint as required as per specifications.
