|
| 1 | Ceiling rose 3 plate |
| 2 | (a) Polycarbonate |
| 3 | (b) Modular |
| 4 | Blower With Vaccum complete Heavy Duty as per specification & as required |
| 5 | PVC round sheet (a) 3 mm Thick |
| 6 | (b) 2 mm Thick |
| 7 | Insulation Tape ¾×7 Mtr. |
| 8 | Switch Socket combined 15 amp 250 Volt 3/6 Pin Flush Type |
| 9 | Drill machine bit 6mm to 20mm(a) R C C Bit |
| 10 | (b) Iron/Metal Bit |
| 11 | (c) Wooden Bit |
| 12 | (d) Diamond bit for Porcelain |
| 13 | MPP condenser 440 Volt Single phase(a) 2.25/2.5 mfd |
| 14 | (b) 3.15 mfd |
| 15 | (c) 4.00 mfd |
| 16 | (d) 6.00 mfd |
| 17 | Switch(a) 6 Amp SP 250 Volt two way F/T |
| 18 | (b) 6 Amp SP 250 Volt modular |
| 19 | (c) 16/20 Amp SP 250 Volt modular |
| 20 | (d) 10 Amp SP 250 Volt modular switch 2 way |
| 21 | (e) Blank Plate 1 Module |
| 22 | (f) Surface Switch 6 Amp |
| 23 | Socket(a) 6 Amp 250 Volt 3 /5 Pin F/T |
| 24 | (b) 16 Amp 250 Volt 3 /6 Pin F/T |
| 25 | (c) 10 Amp 250 Volt 3 /5 Pin Modular Type |
| 26 | (d) 16/20 Amp 250 Volt 3 /6 Pin Modular Type |
| 27 | 6 Amp 250 Volt Bell Push Switch(a) 6/10 Amp SP 250 Volt modular switch bell push |
| 28 | (b) F/T bell push |
| 29 | (c) Surface bell push 6 Amp |
| 30 | 2/3 pin plug top(a) 2 Pin top |
| 31 | (b) 6 Amp 250 Volt 3 Pin top |
| 32 | (c) 16 Amp 250 Volt 3 Pin top |
| 33 | Holder(a) Polycarbonate Pendent |
| 34 | (b) Brass Pendent |
| 35 | (c)Polycarbonate Batten / Angle holder |
| 36 | (d)Modular Batten / Angle holder |
| 37 | GLS Lamp(a) 100 W |
| 38 | (b) 200 W |
| 39 | Call Bell(a) Gong bell |
| 40 | (b) Buzzer |
| 41 | (c) Ding Dong Bell |
| 42 | (d) Multi sound bell |
| 43 | (e) Remote/cordless bell |
| 44 | Multi core round FRLSH PVC insulated copper (flexible) conductor & PVC sheathed cables 1100 Volts(a) Two core 1.00mm (32/0.2 mm) |
| 45 | (b) Three core 1.5mm (30/0.25mm) |
| 46 | (c) Three core 2.5mm (50/0.25mm) |
| 47 | (d) Three core 4.0mm (56/0.3 mm) |
| 48 | LED Lamp(a) 4/5 Watt 250 Volt |
| 49 | (b) 8/9 Watt 250 Volt |
| 50 | (c) 12 Watt 250 Volt |
| 51 | (d) 14/15 Watt 250 Volt |
| 52 | (e) 18/20 Watt 250 Volt |
| 53 | (f) 45 Watt 250 Volt |
| 54 | (g) 50 Watt 250 Volt |
| 55 | Flush type electronic fan regulator step type 100 Watt |
| 56 | Step type modular electronic fan regulator(a)100 Watt (1 module) |
| 57 | (b)100 Watt (2 module) |
| 58 | MCCB 3 phase, 3 pole, 50 Hz, 415 Volts (with Thermal-Magnetic Release)(a) MCCB 100 Amp, 25 KA |
| 59 | (b) MCCB 125Amp,25 KA,3P |
| 60 | (c) MCCB 160Amp,25 KA,3P |
| 61 | (d) MCCB 200Amp,25 KA,3P |
| 62 | (e) MCCB 250Amp,36 KA,3P |
| 63 | (f) MCCB 315Amp,36 KA,3P |
| 64 | (g) MCCB 400Amp,36 KA,3P |
| 65 | (h) MCCB 500Amp,36 KA,3P |
| 66 | MCCB 3 phase & N, 4 pole, 50 Hz, 415 Volts (with Thermal - Magnetic release)(a) MCCB 125Amp, 25KA,4P |
| 67 | (b) MCCB 160Amp, 25KA,4P |
| 68 | (c) MCCB 200Amp, 25KA,4P |
| 69 | (d) MCCB 250Amp, 36KA,4P |
| 70 | (e) MCCB 315Amp, 36KA,4P |
| 71 | (f) MCCB 400 Amp, 36KA,4P |
| 72 | (g) MCCB 500Amp, 36KA,4P |
| 73 | MCB ‘C’ Series, 240/ 415 V, 50 Cycle, 10KA / 15KA(A) Single Pole (i) MCB SP 6A to 32A 10KA |
| 74 | (B) Double Pole(i) MCB DP 32A / 40A 10KA |
| 75 | (iii) MCB DP63A 10KA |
| 76 | (C) Triple Pole(i) MCB TP 63A 10KA |
| 77 | (ii) MCB TP 100A, 15KA |
| 78 | (D) Four Pole (i) MCB FP 63A 10KA |
| 79 | (ii) MCB FP 100A, 15KA |
| 80 | HBC/HRC Fuse Links bolted type(i) 20 Amp to 32 Amp |
| 81 | (ii) 36 Amp to 63 Amp |
| 82 | (ii) 36 Amp to 63 Amp |
| 83 | HBC/HRC Fuse Links knife (DIN) type(i) 63 Amp to 100 Amp |
| 84 | (ii) 125 Amp to 160 Amp |
| 85 | (iii) 200 Amp to 315 Amp |
| 86 | (iv) 350 Amp to 400 Amp |
| 87 | DMC / Nylon Fuse holder fitting / Fuse Base for knife type HBC / HRCfuse Links(i) 20 Amp / 415 V |
| 88 | (ii)32 Amp / 415 V |
| 89 | (iii) 63 Amp / 415 V |
| 90 | (iv) 100-125 Amp/ 415 V |
| 91 | (v) 160 Amp / 415 V |
| 92 | (vi) 200-250 Amp/415 V |
| 93 | (vii)300-350 Amp/415 V |
| 94 | (viii)400-500 Amp/415 V |
| 95 | PVC insulated cable FRLS with copper multi strand conductor(i) 1.0 mm |
| 96 | (ii) 1.5 mm |
| 97 | (iii) 2.5 mm |
| 98 | (iv) 4.0 mm |
| 99 | (v) 6.0 mm |
| 100 | (vi) 10.0 mm |
| 101 | (vii) 16.0 mm |
| 102 | Modular Cover Plate(i) 1 Or 2 Module |
| 103 | (ii) 3 Module |
| 104 | (iii) 4 Module |
| 105 | (iv) 6 Module |
| 106 | (v) 8/9 Module |
| 107 | (vi) 12 Module |
| 108 | (vii) 16 Module |
| 109 | (viii) 18 Module |
| 110 | Electric ceiling fan of double ball bearing complete(i) Ceiling Fan (ISI marked)- 1200 mm Sweep,with minimum air delivery 210m³/min and service value>4.oo as perBEE (BLDC) |
| 111 | (ii) Ceiling Fan (ISI marked)- 1200 mm Sweep,with minimum air delivery 210m³/min as per 5 Star rating (Energy Saver) |
| 112 | (iii) Ceiling Fan Ornamental (ISI marked)- 1200 mm Sweep,with minimum air delivery 210m³/min and service value>4.oo as per BEE (BLDC) |
| 113 | Wall mounting fan oscillating type(i) 300 mm sweep |
| 114 | (ii) 400 mm sweep |
| 115 | Tube light LED(i) 1×18 Watt, Integral i/c batten aluminium body, PC diffuser |
| 116 | (ii) 1×18 Watt, Integral i/c batten PVC body, PC diffuser |
| 117 | (iii) 1×20/22 Watt, Integral i/c batten aluminium body, PC diffuser |
| 118 | (iv) 1×20/22 Watt, Integral i/c batten PVC body, PC diffuser |
| 119 | LED Light fixture (recessed mounting)LED luminiare 2’×2’,36 Watt, colour temp 3000-6500 k |
| 120 | LED down lighter (recessed mounting)(i) 12 Watt, colour temp 3000-6500 k |
| 121 | (ii) 14/15 Watt, colour temp 3000-6500 k |
| 122 | (iii) 18/20 Watt, colour temp 3000-6500 k |
| 123 | Street light with high power LED system(i) 60 Watt, colour temp 3000-6500 k |
| 124 | (ii) 90 Watt, colour temp 3000-6500 k |
| 125 | LED flood light(i) 60 Watt, colour temp 3000-6500 k |
| 126 | (ii) 90/100 Watt, colour temp 3000-6500 k |
| 127 | XPLE insulated power cable, alu. Conductor(i) unarmoured2 core(a) 4 sq. mm |
| 128 | (b) 6 sq. mm |
| 129 | (c) 10 sq. mm |
| 130 | (ii) Armoured2 core(a) 4 sq. mm |
| 131 | (b) 6 sq. mm |
| 132 | (c) 10 sq. mm |
| 133 | (d) 16 sq. mm |
| 134 | (iii) Armoured3 ½ core(a)25 sq. mm |
| 135 | (b)35 sq. mm |
| 136 | (c)50 sq. mm |
| 137 | (d)70 sq. mm |
| 138 | (e)95 sq. mm |
| 139 | (f) 120 sq. mm |
| 140 | (g) 150 sq. mm |
| 141 | (h) 185 sq. mm |
| 142 | (i)240 sq. mm |
| 143 | (j)300 sq. mm |
| 144 | (k) 400 sq. mm |
| 145 | (v) unarmoured4 core(a) 10 sq. mm |
| 146 | (b) 16 sq. mm |
| 147 | (vi) Armoured4 core(a) 10 sq. mm |
| 148 | (b) 16 sq. mm |
| 149 | Crimping / Pin / tube type alum. lugs(i)6-16 mm |
| 150 | (ii)25 mm |
| 151 | (iii) 35 mm |
| 152 | (iv) 50 mm |
| 153 | (v)70 mm |
| 154 | (vi) 95 mm |
| 155 | (vii)120 mm |
| 156 | (viii) 150 mm |
| 157 | (ix) 180 mm |
| 158 | (x) 240 mm |
| 159 | (xi)300 mm |
| 160 | (xi)400 mm |
| 161 | Copper lugs Pin / tube(i) Upto 16 sq. mm |
| 162 | (ii)25 sq. mm |
| 163 | (iii) 35 sq. mm |
| 164 | (iv) 50 sq, mm |
| 165 | D.O. fuse assembly with fuse barrel (set of 3 Nos.) 11 KV |
| 166 | AB switch assembly set (set of 3 Nos. 11 KV, 400 Amp |
| 167 | D.O. fuse element 2.5 Amp. To 10 Amp. 11 KV |
| 168 | Rubber mat 2×1.0 Mtr, 1100V tested |
| 169 | Hand Gloves 11 KV tested |
| 170 | Fiber discharge rod i/c connection copper lead tested(6 Sq.mm copper wire minimum 10 mtr lenth) |
| 171 | Fire extinguisher (i) ABC type refilled 6 Kg & ready to use |
| 172 | (ii) ABC type refilled 4 Kg & ready to use |
| 173 | Electric helmet |
| 174 | Electric Gum boot / shoes as per required size |
| 175 | Electrician Rain coat |
| 176 | Single piece non-linear resistor polymer type Lightning Arrestor (set of 3 nos) for 3 wire, 11 KV |
| 177 | C.F.L.(a) 11 W 2 Pin PL \"S\" type |
| 178 | (b) 18 W 4 Pin PL \"L\" type |
| 179 | (c) 36 W 4 Pin PL \"L\" type |
| 180 | (d) 85/90 W Retrofit type CFL BC/ES Cap. |
| 181 | (e) 85/90 W Retrofit type CFL Spiral Shape |
| 182 | Holder for 9/11 W PL |
| 183 | Holder for 10/13/18/36 W PL |
| 184 | FI Copper Ballast VPIT 9/11 CFL |
| 185 | FI Copper Ballast VPIT 13/18 CFL |
| 186 | Steel Screw / Black Screw(a) ½\"\" / ¾\"\" |
| 187 | (b) 1\"\" / 1½\"\" |
| 188 | (d) 2\"\" / 2½\"\" |
| 189 | (e) 3\"\" |
| 190 | Machine Screw With Nut –Bolt & Wisher(a) ¾\"\" /1\"\" |
| 191 | (b) 1½\"\" / 2\"\" |
| 192 | (c) 2½\"\" / 3\"\" |
| 193 | Electrical Line Tester 100-500 W |
| 194 | Electrical Line Tester 100-500 W Heavy duty Tester SP-15 |
| 195 | Electrical Line Tester 100-500 W Industrial Tester SP-15 |
| 196 | Hackes Blade(a) Single |
| 197 | (b) Double |
| 198 | PVC local nails(a) Wire clip nails as required size |
| 199 | (b) Conduit pipe clips as required size |
| 200 | (c) Rowel plug as required size |
| 201 | Adhesive Rubber (Kachhi Rubber) |
| 202 | Plaier7\" / 8\" long |
| 203 | Nose Plaier 6\" / 7\" long |
| 204 | Screw Driver Complete folding Set |
| 205 | Screw Driver Two-in-one Set (06 No.) as required size |
| 206 | Wire Cutter plaier as required size & as per specification |
| 207 | Screw Driver Poker 6\" / 7\" / 8\" long |
| 208 | Drill machine with hammer & screw driver(opening & Fixing ) heavy duty ( 32 mm) |
| 209 | Grander Heavy duty as required as per specification |
| 210 | Grander Blade as per required (For wooden, iron, Steel, concret, R.C.C. Etc.)4\" / 5\" |
| 211 | Locks with 3 Key(a) Long Shackle 5-Lever |
| 212 | (b) Long Shackle 6-Lever |
| 213 | (c) 6-Lever |
| 214 | (d) 7-Lever |
| 215 | Grander Heavy duty as required as per specification |
| 216 | Electrician Tools Kit Bag as required size & specification (Lather Only) |
