|
| 1 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for Complete all as specified and as directed. |
| 2 | M&Lfor 25mm thickPCC 1:2:4 type B0 (12.50mm graded crushed stone aggregate) as in floors finished even & smooth using extra cement in patches. Complete all as specified and as directed. |
| 3 | Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing)and removing rubbish off the premises Complete all as specified and as directed. |
| 4 | M&L vetrified ceremic tiles 10 mm thick, in light shade, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) Complete all as specified and as directed by Engr-in-charge. |
| 5 | ~Ditto~ all as per above item No. 4 but as in skirting with rendering 10mm thick CM 1:4 Complete all as specified and as directed. |
| 6 | M & L Non Skid ceramicjoint free tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm,in floors etc. set and jointedin neat cement slurry and pointed in white or coloured cement to match the existing tile over and including 15 mm thick screed bed or bedding layer of mortar with CM 1:4 Complete all as specified and as directed. |
| 7 | M&L for glazed ceramic tiles colour 350x250x7mm / 450x350x7mm thick in vertical surfaces such as in skirting, dado and risers to steps set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfsce of tile over and including 10mm thick cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles Complete all as specified and as directed. |
| 8 | Taking downcement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. Complete all as specified and as directed. |
| 9 | M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound. Complete all as specified and as directed. |
| 10 | M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces inCM in 1:6 finished even and fair without using etra cement. Complete all as specified and as directed. |
| 11 | M & L for rendering 5 mm thick in C:M 1:3 on Ceiling in patches and finishes and smooth Complete all as specified and as directed. |
| 12 | M & L applying two coat of white wash on newly plastered or unplastered ceiling surfaces including preperation ofsurfaces, complete all as specifiedand as directed. |
| 13 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and as directed. |
| 14 | M&L Brick work with sub class \"B\" bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed. |
| 15 | ~Ditto~ all as per Srl item No 14 above but except brick. Complete all as specified and as directed. |
| 16 | M & Lpreparation of Old steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint complete all as specified and as directed. |
| 17 | M & Lpreparation of Old wooden surfaces of any description over 10 cm width or girth& applying two coat of synthetic enamel paint complete all as specified and as directed. |
| 18 | Taking down steel tubing and connections including cleaning for refixing or removal form site for 15mm bore pipeall as specified and directed. |
| 19 | Taking down steel tubing and connections including cleaning for refixing or removal form site for 20mm bore pipeall as specified and directed. |
| 20 | Taking down and Refixing 20mm old steel tubing and connection or old posittion (walls/ceiling/floors etc) concealed all as specified and directed. |
| 21 | Taking down and Refixing 25mm old steel tubing and connection or old posittion (walls/ceiling/floors etc) concealed all as specified and directed. |
| 22 | S&F 15mm bore tubes medium grade galvanized with all fittings such as sockets, elbows, unions, Tees & short and fixed to walls and ceilings or laid in floors of any length all as specified and directed. |
| 23 | S&F 20mm bore tubes medium grade galvanized with all fittings such as sockets, elbows, unions, Tees & short and fixed to walls and ceilings or laid in floors of any length all as specified and directed. |
| 24 | M & L for cutting chases, pinning in brick walls/ stone concrete block or slab walls , making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings , steps, cills, sunshades, shelves, lintels etc; and cutting chases for concealed water tubing or cocealed conduit wiring, etc and making good , cutting not exceed 10 cm girth complete all as specified and as directed. |
| 25 | Taking down of eves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed. |
| 26 | S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls. Complete all as specified and as directed. |
| 27 | S&F, PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls. Complete all as specified and as directed. |
| 28 | S&F PVC (SWR) bends ISI marked any radius of 110 mm borewithaccess door complete all as specified and directed. |
| 29 | S & F PVC (SWR) bends any radius, 75 mm bore. Complete all as specified and as directed. |
| 30 | PVC (SWR) 110mm bore \"T\" equal or unequal complete all as specified and directed. |
| 31 | Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3. Complete all as specified and as directed by Engr-in-charge. |
| 32 | PVC (SWR) vent cowl for 110 mm bore pipe. Complete all as specified and as directed by Engr-in-charge. |
| 33 | S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed. |
| 34 | S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe with access door complete all as specified and directed. |
| 35 | S&F PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe complete all as specified and directed. |
| 36 | S&F PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe with access door complete all as specified and directed. |
| 37 | S & F PVC (SWR) branch piece 110mm bore, single (single Y) equal or unequal. Complete all as specified and as directed. |
| 38 | PVC (SWR) floor trap / Nahani trap with grating 75 mm dia incl jointing with solvent cement complete all as specified and directed. |
| 39 | S & F in repair sinks with drainage board made of stainless steel 1 mm thick with plugs, washer, wastes , brackets etc, overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed. |
| 40 | S&F in repair of kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws Complete all as specified and as directed . |
| 41 | Taking down chowket or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each complete all as specified and as directed. |
| 42 | Taking down chowket or frame with shutter (without taking of shutters from the frames) areaexceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each complete all as specified and as directed. |
| 43 | Taking down Shutter exc. 1 sqm and not exc. 2 sqmeach complete all as specified and as directed. |
| 44 | Supply and fixing floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, over all length of cover plate 140 mm complete all as specified and directed. |
| 45 | S & F powder coated (min thickness of powder coating 50 micorn) Aluminium door, window,ventilator frame,Louvers with one or more rebates and shutter incl jointing cleat for fixing etc. including making good to the disturbed surfacesand matching existing treatment (cemnt base paint/distemper/white wash/plastic paint) etc complete all as specified and as directed. |
| 46 | S&F powder coatedaluminum window and ventilator shutters, fixed type without sash bars, aluminium section weighing 0.55 Kg/ Rm including necessary jointing cleats, glazing clips, ruber packing, anodised aluminium snap beading, screws etc. including making good to the disturbed surfaces complete all as specified and directed. |
| 47 | S&F 4 mm thick sheet glass ordinary quality and galzing with necessory rubber beading of any size complete as in aluminium windows/ventilators all as specified and directed. |
| 48 | S&F 3 mm thickfigured glass pin head type and glazing with oil putty or wooden beads in squares each pane complete all as specified and directed. |
| 49 | S&F stainless steelwire cloth 0.36 mm nominaldia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples beads or in steel window complete all as specified and directed. |
| 50 | S&F Factory made single/double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm(double rebat) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length including fastenar of 100 mm long 10 mm dia complete all as specified and directed. |
| 51 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length including fastenar of 100 mm long 10 mm dia complete all as specified and directed. |
| 52 | M&L for providing PCC 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) as in filling of door frame and holdfasts including necessary farmwork etc. Complete all as specified and as directed. |
| 53 | S&Fin Factory made single/doubleextruded WPC (Wood Polymer Composite) solid decorative prelam both side flush door30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture pr oof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) Complete all as specified and as directed. |
| 54 | S&F for wire gauge i.e. panel will be wire gauge in liew of double side prlam PVC sheet panel the wire gauge shell be wrapped on a additional square 8 mm solid tube and the tube shell be welded tomMS tube the wire gauge shell be stretched to tighten firmly Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. Complete all as specified and as directed. |
| 55 | S&F in repair 20mm rigid prelaminated coloured solid celuka board fixed asin cup board , Cabinate ,Drawer etc as per manufacturer specification and Complete all as specified and as directed. |
| 56 | M & L for 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished. Complete all as specified and as directed. |
| 57 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain clour PVC sheet reinforced with M.S square tube in opening as per specification. Complete all as specified and as directed. |
| 58 | S & F Factory made solid panel PVC door shutter 30 mm thick (style)manufactured as per SSR Part I specifications and drawing. consisting of frame made out of MS tubes for top & Bottom rails. MS frames shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plaincolour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement manufactured as per SSR Part I specifications and drawings complete all as specified and as directed. |
| 59 | S&F 100 mm long aluminium alloy type C-22 butt hinges with galvanised ms hinge pin etc. Complete all as specified and as directed. |
| 60 | S&F 150 mm long aluminium anodised barrel tower bolt and 12 mm dia fixed complete all as specified and as directed. |
| 61 | S&F 150mm long aluminium anodised handle cast type and fixed complete all as specified and as directed. |
| 62 | S&Falluminum alloy, anodised, sliding door bolt with hasp & staple (bolt type) and length of 250 mm long etc. Complete all as specified and as directed. |
| 63 | S & F Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 150mm long Complete all as specified and as directed. |
| 64 | S&F framed work such as grills, gratings and holdfasts etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work conferming to Fe- 290-0 Gde-E-165 complete all as specified and as directed. |
| 65 | S&F continuous (Piano) hinges,mild steel, bright finish or electro galvanisedwidth of flaps (when open) 30 mm complete all as specified and directed. |
| 66 | M&L two coat of synthetic enamel paint overnew woodensurfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primerincluding preparation of surfaces Complete all as specified and as directed. |
| 67 | M&L two coat of synthetic enamel paint overnewsteel surface of any description over 10cm in width or grithnot otherwise describedover one coat red oxzide primerincl preparation of surfaces Complete all as specified and as directed. |
| 68 | S&F in repair fancy type draphery roads with brackets 20-25mm bore cut to length as required of colour as selected and directed. |
| 69 | S&F in repair 5 mm bore chromium plated shower rose fancy type fixed to pipeall as specified and directed. |
| 70 | S & F in repair for 15 mm bore Bib taps,fancy type, chromium plated cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed to pipe complete all as specified and as directed. |
| 71 | S & F in repair for 15 mm bore Stop valves, cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixedto pipe complete all as specified and as directed. |
| 72 | S&F in repairfor 15mm bore chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipescomplete all as specified and directed. |
| 73 | S & F in repair 15mm bore of pipe Brass chromium plated wall Mixer (2/3 hole) for mixing hot & Cold water arrangement, long shank suitableof approved quality screwed down for iron pipe and fixed complete all as specified and as directed. |
| 74 | S & F in repair for 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 75 | S & F in repair for Grating doom 100 mm dia of chromium plated (Minimum weight 25gms) fixed complete all as specified and as directed. |
| 76 | S & F for Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats(Minimum weight 300gms) fixed Complete all as specified and as directed. |
| 77 | S & F in repair for Soap dish, any type, fixed to plugs with chromium plated brass screws fixed complete all as specified and directed. |
| 78 | S & F for Sheet corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long Complete all as specified and as directed. |
| 79 | S & F in repair Towel Rail 600mm long of PTMT/SS fixed with and including Chromium plated brass screws and wooden/plastic cleats .(Minimum weight 190gms) fixed Complete all as specified and as directed. |
| 80 | S & F in repairs Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges including taking down the existing towel rail. Complete all as specified and as directed. |
| 81 | S & F in repair for PVC connections 15 mm size with PTMT nuts of length 600mm fixed Complete all as specified and as directed. |
| 82 | S & F in repair for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) fixed in repairs complete all as specified and as directed. |
| 83 | S & F in fixed in repair Vitreous china WHB550x400mm on exsting brackets , fixing flat back or an le back type with PVC (hdpe) 32 mm dia waste pipe, brass coupling 32 mm CP etccomplete all as specified and directed. |
| 84 | M&L Cudappah stone slab on cooking platform/shelf 30-35mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match over and including 20mm thick screed bed in CM 1:6, the shade of the slab including rubbing and polishing and cutting of holes for gas pipe complete all as specified and directed. |
| 85 | M&LGranite (of any type ) slab/tiles as cooking platform/shelf 16-18mm thick machine cutbedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and cutting of holes for gas pipe Complete all as specified and as directed. |
| 86 | S&F in repair PVC low level flushing cistern of capacity 10 litres complete with siphon handle lever float valve and PVC bend including connecting to ITWC/ ETWC and fixing on wall bracket completeall as specified and directed. |
| 87 | S & F in repair for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers fixed in repairs ccomplete all as specified and as directed. |
| 88 | Complete removal of existing treatment on walls including steel wire brushing and scraping etc and applying wall care putty in two layers on wall surfaces including rubbing, levellingand preparing the surfaces for receiving further finishes as directed. |
| 89 | M&L for preparation of old decorated surfaces of ceilingincluding brooming down or steel wire brushes, scraping down smoke soot moulds, moss and effeorescent salts and trading oil and greasy spot and applying one coat of white wash. Complete all as specified and as directed. |
| 90 | M&L for applying two coat of distemper Oil emulsion white or tinted on new /old prepared surfaces of wall complete all as specified and directed. |
| 91 | M & Lpreparation of walls old plastered surfaces & applying two coats of cement based paint complete all as specified and as directed. |
| 92 | M&L for two coats of cement base paint on walls incl preparation of surfaces on plastered or on plastered new surfaces complete all as specified and as directed. |
| 93 | M & L for 75 mm thick cement concrete 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm thick joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed. |
| 94 | M & L for preparing surfaces of sunken floor by brooming down or steel wire brushing and cleaning the surface with water and applying a coat of Rendercok HBF water proofing coating as per manufacturer\"s instructions over slab and sides of sunken complete all as required and as directed.M/s Fosroc Chemicals or equivalent as approved by GE. |
| 95 | M&L for complete removal ofexisting water proofing treatment from top of roof and canopies / chajjas of building including removal of debrisout sideMD land complete all as required and as directed. |
| 96 | M&L Water proofing treatment on roofsurface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment,properly cleaning & drying the concrete surfaces Complete all as specified and as directed by Engr-in-charge. |
| 97 | M&L for 10 mm thick rendering on roof surfaces/concrete surface in CM 1:3 Complete all as specified and as directed. |
| 98 | Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster. Complete all as specified and as directed. |
| 99 | Laying unrolled over the bitumen coated surface, 3 mm thick polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction. Complete all as specified and as directed. |
| 100 | Applying two coats of bituminous base aluminium paint on old Surfacesincluding preparation Complete all as specified and as directed. |
| 101 | S & F of Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as specified and directed. |
| 102 | S & F in repair Hasp and Staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws 75 mm size complete all as specified and as directed. |
| 103 | S & F Ball catches with 8 mm dia., steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed. |
| 104 | M & L Machine cut Kota stone slab flooring 20-25 mm thick as in floor over and including cement screed base 15 mm thick in cm 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed. |
| 105 | M & L Kota stone slab 10-15 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 10mm thick rendering in cement mortar 1:4 , on fair faces of brick work or concrete surfaces as backing complete all as specified and as directed. |
| 106 | M & L for Cement concrete type D-21:4:8(using 20 mm graded aggregate) as in foundation filling and mass concrete,sub base complete all as specified and as directed. |
| 107 | M & L providing, cement concrete type B1 1:2:4 (20 mm graded aggregatet)t in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 108 | M&L for vitrified paver color tiles 400 x 400 ,10 to 12 mm thick, moulded set jointed and pointed in neat cement slurry with grey cement and pigment, in floors, over and including 15 mm thick screed bed orbedding layer of cement mortar (1:6)complete all as specified and directed. |
| 109 | Dismantling water tanks capacity exc 250 Ltr and n exc 500 Ltr and removing from sitecomplete all as specified and as directed. |
| 110 | S&F rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) capacity 500 Ltrhoisted and fixed in position complete all as specified and as directed. |
| 111 | Providing precast cement concrete 1:2:4 type B-1 (using 20mm graded stone agg)as in manhole covers set in cement motar 1:6 all as specified and directed including necessary formwork and moulds complete all as specified and directed. |
| 112 | M & L for Cutting into existing manholes for connecting new drains, making good to pipe and ren-dering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 100 mm bore complete all as specified and directed. |
| 113 | M&L PCC 1:4:8 type D-2 (using 20 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150 mm dia pipe complete all as specified and directed. |
| 114 | M&L for in repairs laying DWC Pipe 150 mm dia pipes in trenchesClass SN-8 conforming to IS 16098 (Part -2) in 6 mtr length with coupler complete all as specified and directed. |
| 115 | M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed. |
| 116 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to factory store and makinggood disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 117 | M&L for point wiring with 1.5 Sq mm, FRLS, PVC insulated, single core, unsheathed, multi stranded 1100 volts grade, copper conductor cable drawn through existing concealed conduiton ceiling/wall, with and includingcontinuous 1.5 Sqmm, FRLS, PVC insulated single core multi stranded copper conductor cable earth continuity conductor connected to common earth and earth dolly and including metal sheet enclosure rectangular terminal boxes of suitable size and white cover plates suitable for mounting modular switches, sockets etc complete all as specified and directed. |
| 118 | One light point/fan point controlled by one switch complete all as specified and directed. |
| 119 | One switch socket combination out let 5 Amps on independent board. complete all as specified and directed. |
| 120 | One Call bell Point Controlled by one bell Push complete all as specified and directed. |
| 121 | One socket out let 5 Amps on the same board with other switches. complete all as specified and directed. |
| 122 | ~Ditto~ as per item No 13 above but with 2.5 sqmm PVC insulated multi stranded copper conductor and 2.5 sqmm PVC insulated multi stranded copper conductor as earth continuity conductor for one socket outlet 15 Amps on independent board complete all as specified and directed. |
| 123 | ~Ditto~ as per item No 13 above but with 4 sqmm PVC insulated multi stranded copper conductor and 4 sqmm PVC insulated multi stranded copper conductor as earth continuity conductor for one socket outlet 15 Amps on independent board complete all as specified and directed. |
| 124 | Supply & FixingModular type Switch single pole 16 Amps one way. complete all as specified anddirected. |
| 125 | Supply & Fixing Modular type socket out let 2 in 1, 6/16 Amps. Complete all as specified and directed. |
| 126 | Supply & Fixing Modular type Socket out let 6 Amps complete all as specified anddirected. |
| 127 | Supply & FixingModular type Bell Push single pole 6 Amps one way. complete all as specified and directed. |
| 128 | Supply and fixing Bell,AC, Ding Dong type 230 Volt complete all as specified and directed. |
| 129 | Supply and fixing Fan step type Regulator modular type, 120 watts, 230 Volt complete all as specified and directed. |
| 130 | Supply & FixingModular type Switch single pole 6 Amps one way. complete all as specified and directed. |
| 131 | Supply and Fixing Ceiling Rose Surface PVC type 65 x 50 mm two to three terminals. Complete all as specified and directed. |
| 132 | Supply and Fixing lamp holder Surface PVC type complete all as specified and directed. |
| 133 | Maintenance and checking of ceiling fan of any size / type / make, checking the serviceability of all parts, electric connections etc. Preparation of old painted surfaces and painting with two coats of synthetic enamel paint of approved shade, reconnecting / hanging in original position, reconnecting the electric cables and testing complete all as specified and directed. |
| 134 | Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified and directed |
| 135 | Maintenance and checking of exhaust fan of any size / type / make, checking the serviceability of all parts, electric connections etc. Preparation of old painted surfaces and painting with two coats of synthetic enamel paint of approved shade, reconnecting / hanging in original position, reconnecting the electric cables and testing complete all as specified and directed. |
| 136 | S & F LED light fitting 1x9W/1X10W bulk head Luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 137 | Supply and fixing in repair Security lighting luminaire for use with LED lamps, of capacity not less than 35/36 Watts IP-65, 230 Volts, with high quality lenses & reflector, High grade aluminium pressure Die-Cast Housing with toughened glass cover, IP-65 class of protection, complete with control gear and all accessories fixed with 25/40 mm bore medium grade GI Pipe Bracket 1.5 mtr long bent to shape,fixed on wall with MS Flat Clamps, nuts & Bolts as required complete all as specified and directed. |
| 138 | Supply and fix in replacement Smart bright Batten Series, LED luminaire using LEDs 22/20 watt, natural white, 2200 Lumen, with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output with wide voltage protection range, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start ,with 3 core flexiblecopper wire 1.5 sqmm and connecting accessories ,Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification. complete all as specified and directed.Make : Philips Cat part BN 021C LED 22S PSU CW GR/Bajaj/Crompton |
| 139 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 140 | Taking down Old un serviceable DB/Switch fuses complete with all accessories, any type/capacity complete, after disconecting cable connection, and remove to factory store complete all as specified and directed. |
| 141 | S&Fin replacement of sheet steel enclosure distribution boards, double door factory madeVTPN 4 way 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulatedcopper jumpers of suitable size from the MCCB to the out going circuitscomprising of 3 phase 4 wire of suitable rating all as specified and directed by Engineer-in-Charge..Make of Distribution Board Legrand cat no:5077 50 or equivalent in INDO ASIAN / C&S complete all as specified and directed. |
| 142 | Supply and Fixing Sheet metal enclosure for DBs when MCBs to be Used, 8 way, SPN, double door type, 240 Volt with 200 amps rated busbar complete all as specified and directed.(Note : MCBs will be Measured separately) |
| 143 | Supply and Fixing Sheet metal enclosure for DBs when MCBs to be Used, 4 way, SPN, double door type, 240 Volt with 200 amps rated busbar complete all as specified and directed.(Note : MCBs will be Measured separately) |
| 144 | Supply and Fixing MCCB, four pole, 160 Amp, 415 Volt, of breaking capacity 36 KA complete all as specified and directed. |
| 145 | Supply and Fixing MCB, SPN, 230 Volt of capacity upto 32 Amps(as ordered), 10 KA \"C\" series complete all as specified and directed. |
| 146 | Supply and Fixing MCB, SP, 230 Volt of capacity 6 to 32 Amps(as ordered), 10 KA \"C\" series complete all as specified and directed. |
| 147 | M&L for sub main wiring with two single core, multi stranded,PVC insulated, 1100 Volt grade, FRLS,cable with copper conductor of size 6 Sq mm in and including/drawing throughthrough rigid non metalic PVC conduit medium grade, ISI marked, 25 mm dia for sub main wiring including continuous PVC insulated copper conductor single core earth continuity conductor of size 6 Sqmm connected common earth. (Note :-2x 6 Sq mm conductor cable, 1 x 6 Sq mm conductor earth continuity cable & PVC conduit shall be measured as one unit length). complete all as specified and directed. |
| 148 | Taking down sub main wiring any size of two single core aluminium/ copper conductor cable PVC insulated alongwith/ without conduit and accessories and removing from site, making good the disturbed surfaces of wall and floor/ ceiling etc.,complete all as specified and directed. |
| 149 | Earthing complete for various equipments with galvanised steel earth plate electrode600 x 600 x 6mm thick directly burried in the ground (earth pit not less than 2.25 metre deep below ground level) with top edge of earth plate not less than 1.5 m below the ground level, connected to G.Iwire 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, GI pipe 20mm bore light grade for protection of earthing strip, PCC chamber 1:4:8, type C-1 using 20mm graded stone aggregate, internal surface of concrete chamber plastered with 12mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge ( 0.63) 8 mesh per linear inch, 50mm thick cover of RCC 1:2:4, type B-1, using 20mm graded stone aggregate, reinforced with 8mm TMT bar at 100mm center to center both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR Part-I and as specified including excavation and earth work and connecting the earthing to an earthing test point as specified and testing on complete all as specified and directed.Note:- Unit rate quoted is inclusive of earth lead and protection pipe upto 7.5 metre from earth plate. |
| 150 | Schedule of credit of Amount Rs.,53,105.00 to be deducted during AOC. |
