Tender For Various Repair Work At Ajk Thana Bhawan Mandsaur And Thana Bhawan Bhavgarh Distt. Mandsaur - Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete. Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of Chief Engineer will be required. Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work. Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand) Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) Providing and laying insitu six course water proofing treatment with APP (Atactic poly- propylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, 2nd, 4th and 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. (with 5 years service guarantee) Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work. Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metres and below. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) non decorative type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens (strips) and frame of kiln seasoned and chemically treated, finger jointed 1st class hard wood of width not less than 65mm for style, top rail, bottom rail and 125mm for lock rail. Block board shall be provided with well matched 3mm thick commercial 3ply veneering consisting of vertical grains, cross bands and commercial grade face veneers on both outer faces of shutters including kiln seasoned and chemically treated, finger jointed 2nd class teak wood external lipping (battens) fixed in factory by using peneumatic gun, of depth not less than 25 mm on all edges of shutters including all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50cm. Each shutter shall be factory made to the exact opening size within frame of doors/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and confirmity with IS:2202. 30mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice .husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed S.S. screws having minimum density of 750 kg/m3 and screw withdrawal strength of 2200 N (Face) & 900 N (Edge), minimum compressive strength 58 N/mm2, modulus of elasticity 900 N/ mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S. hold fast/lugs/S.S.dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or S.S. dash fasteners shall be paid separately) Single rebate (75 mm X 50 mm) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice .husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 24 mm thick WPC (Wood polymer composite) solid plain flush door shutter Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete: 300x16 mm Providing and fixing ISI marked stainless steel door latches with screws etc. complete : 250x20x6 mm Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete : 125 mm Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 100x60x2.50 mm Providing and fixing Stainless steel hanging type floor door stopper with necessary screws, etc. complete. Dismantling tile/ Kota stone/ Marble / Granite work in floors/walls and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm. Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4 (1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete Plain ivory light shade Size 600X600mm thickness 9-10mm Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting dado and wall lining laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete Plain ivory light shade Size 600X600mm thickness 9-10mm Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete. Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above plinth level up to floor two level in : Having 50 kg / cm2 average compressive strength. Cement mortar 1:6 (1 cement : 6 sand) Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Rate includes recess cutting in floor and making good the same wherever required. Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineerin-Charge. Internal work - Exposed on wall 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia .Pipes. Providing and fixing CPVC gate valve with knob of approved quality. 25 mm nominal bore Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931and weighing not less than 400gm, 15 mm nominal bore. Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gm, 15 mm nominal bore Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. (minimum wall thickness 3.2mm) 75 mm diameter 110 mm diameter Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single tee without door 75x75x75 mm 110x110x110 mm Bend 87.50 75 mm bend 110 mm bend Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40 mm dia Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 5 With 40mm nominal size graded stone aggregate. M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : M 20 –Grade Concrete Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for concrete up to plinth level. Walls (any thickness) including attached pilasters butteresses, plinth beams and string courses etc.up to plinth level. Suspended floors, roofs, landings, balconies and access platform. Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete . (Note:- 1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge. 2. No extra payment shall be done for overlaps and/or couplers. 3.Couplers shall be conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”) Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement : 3 sand) Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With well burnt bricks Providing and fixing square- mouth S.W. gully trap class SP1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size P type With well burnt bricks 5.1 Point wiring surface rigid P.V.C. casing & capping Pointwiring(excludingmetallicswitchbox& sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVCinsulatedcableFRLSwithcoppermulti strandconductor ISImarkedinSurfacerigid P.V.C. casing and caping ISI marked of suitable size and1.5sq.mm. PVCinsulated FRLS copper earth continuity conductor of green colour inside casing & capping screwlessconnectorfor jointsetc.asrequired as per specification for Light Point/Fan Points. 4.1 Light Point/Fan Points. a) Short point b) Medium point c) Long point 4.2 3 Pin 6 Amp socket outlet on Separate Board c) Medium point d) Long point 5.2 Socket same board 6A Pointwiring(excludingmetallicswitchbox& sheet but including switches, sockets) for 3 pin 6Amp. socket outlet point with1.5sq. mm.PVCinsulatedcableFRLSwithcopper multi strandconductor ISImarkedinSurface rigidP.V.C.casingandcapingISImarkedof suitable size and1.5sq.mm. PVCinsulated copper earth continuity conductor of green colour insidecasing&cappingwithrequired materials as per specification on same board. 5.3 Circuit wiring 2.5Sq. mm WiringforcircuitwiringwithPVC insulated cable FRLS with copper multi strand conductor ISImarkedinSurfacerigidP.V.C. casingandcapingofISImarked suitablesize etc. as required as per specification 2x2.5 Sq.mm. 4x2.5 Sq.mm. 10.1 Power point wiring surface rigid P.V.C. casing & caping Point wiring (excluding metallic switch box & sheet) for 3Pin16Amp. socket outlet pointwith4sq.mm. PVC insulated cable FRLS with copper multistrand conductor ISImarkedinsurfacerigidP.V.C.casingandcapingISI marked of suitable size etc.with 20/16 Amp. F.T.switch &socket/ S.S.combined20 /16/6Amp. of ISI marked and 4sq.mm. PVC insulated FRL Scopper earthcontinuity conductor of green colour inside capping, screwless connector for joints as per specification for : On Separate Board Medium point Long Point Supply and fixing PVC conduit ISI marked FRLS along with the accessories in concealed system etc. as required PVC. conduit 25 mm (HMS) 18.3 Modular PVC box (surface) Supplyingand fixingof approvedmakemodular typePVC box minimum depth 40 mm and minimum thickness 2 mm with modularbaseandcoverplateincludingfixingonsurfaceetc. as required for: 1 Or 2 Module PVC box 4 Module 6 Module 8/9 Module 12Module Triple pole and neutral switch fuse with two earthing terminals Supply of I.S.I. Marked iron clad / metal clad triple pole and neutral switch fuse (conduit entry ) /cable gland entry with two earthing terminals -- 100 Amps. 415/500 Volts. 27.3 MCCB 3Ph & N, 4Pole, 50Hz, 415V (thermal - magnetic release) Supplying of ISI marked and approved make of moulded case circuit breaker (MCCB) suitable for 3phase & N,4 pole, 50Hz,415Volts, (Ics=100%Icu)ACsupplywith thermal-magnetic release having respective breaking capacity (KA) at 415Volts cited against their range standard conforming to IS/IEC 60947-2 27.3.1 MCCB 63 to 100A, 25kA, 4P MCCB25kAcurrentrating-63to100Amp&adjustable overload setting 80%-100%of In, adjustable short circuit setting 6-10 In 4 Pole Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of C series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- MCB SP 6Amp to 32Amp 10kA rating Double pole MCB DP For 40Amp 10kA rating Triple pole MCB TP 50A to 63A, 10kA Four pole MCB FP 50Amp to 63 Amp 10kA rating 27.11 SPN MCB DB Supply of approved make powder coated sheet steel encloser SPN MCB DB inclusive of busbar, neutral bar, earth bar, connection copper wire not less than 16 sq.mm & two earth terminals etc. complete as per IS:13032(exclusive of MCB & isolator)- 12 Way double door IP 43 protection 27.12 TPN MCB DB double door Supplying of approved make TPNMCBDBmetal double door IP 43 protection with provision for FP MCB/Isolator/RCCB/RCBOasincomerandSPMCBs as outgoing inclusiveof busbar, neutral bar, earthbar, connectioncopperwirenot less than16sq.mm&two earth terminalsetc. completeasper IS:13032(exclusive of MCB & isolator): 27.12.1 4 Way (4+12) 27.14 Vertical TPN MCB DB, with provision for MCCB upto 160A TP/FP 36kA, double door Supplying of approved make, powder coated metal double door vertical TPN MCBDB IP 43 protectionwith provision forMCCBupto160ATP/FP36kAasincomer and space for SP/TP MCBs as outgoing (without MCCB/MCBs) inclusive of busbar & connections etc 27.14.1 4 Way without MCCB LED lamp Supply and fixing in position LED lamp of approved make 9W 250Volt Supply and fixing of approved make step type modular electronic fan regulator including connection etc. as required on existing board 100 Watt(2 module) Supplying, erection and testing of approved make electric Ceiling fan of double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 voltsincluding connections with all necessary material complete of approved as required confirming to IS :374/2019 with upto date amendments. Ceiling Fan (ISI marked)-1200 mm Sweep, with minimum air delivery 210 m³/min and service value ≥ 4.00 as per BEE.. Supplying and fixing of deluxe fresh air fan with louvers (ventilating fan) with self closing louvers of decorative PVC blades mounting square frame of approved make complete with all necessary material as required 200mm RPM1300/1400 Supply and fixing Led tube rod comprising of LED tube with non-integral/integral driver, upto 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with system efficacy> 100 lm/Watt. LED driver PF> 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70.Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job. Tube light LED 1 X 20/22Watt, Integral i/c batten aluminium body, PC diffuser. 31.13 Street light with high power LED system Supplyandfixingstreet lightwithhighpowerLEDof3to6Watt eachonexistingbracketassembledonsingleMCPCBandadditional unique peanut lens on each LED, system lumens output with efficacy>120 lm/Watt. luminiarehaving color tempupto6500K& 50000hrs.burninglifewithminimum@L70,Thecolourrendering indexofLEDlightshouldbemorethan70.Luminiarecomprisesof driver,PF>0.95&surgeprotection10KV.Housingmadeofpressure die cast aluminiumwithheat resistant flat glass, IP65protection. Submission LM79-08/IS16106 (2012), IEC60598, IEC61347 i/c connection wire, testing etc. to complete the job. 31.13.3 90W 90Watt, color temp 3000-6500k as required. 31.14 LED flood light SupplyingandfixingfloodlightwithhighpowerLEDof3to6Watt eachassembledonsingleMCPCBandadditionaluniquepeanut lens on eachLED, systemlumens output with efficacy>120 lm/Watt. luminiarehaving color tempupto6500K&50000hrs. burninglife withminimum@L70,The colour rendering indexofLEDlight shouldbemorethan70.Luminiarecomprisesofdriver,PF>0.95& surge protection 10KV. Housing made of pressure die cast aluminiumwithheatresistant flatglass, IP65protection.Submission LM79-08/IS16106(2012),IEC60598,IEC61347i/cconnectionwire, testing etc. to complete the job. 31.14.2 30W 30Watt, color temp 3000-6500k as required. Earthing with G.I. earth plate 600mm X 600mm X 6mm thick including accessories and providing masonry encloser in cement mortar, cover plate having locking arrangement on the top and G.I. watering pipe 20mm dia 2.7 metre long etc. (but without charcoal or coke and salt) complete as required Add extra for using salt and charcoal/coke for G.I. plate or copper plate earth electrode as required including excavation and refilling the pit in all type of soil, murrum Supply and laying 25mm X 5mm G.I. strip at 0.5 metre below ground level as strip earth electrode including jointing etc. as required. Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 1 core/2 core/3½ core/4 core ISI marked with alu. stranded /solid conductor 4 core unarmoured 16 sq. mm.
