|
| 1 | M & L for preparation of old plastered surface of wall/ceiling, complete removal of existing treatmentand painted surfaces complete all as specified and directed by Engineer-in-Charge. |
| 2 | M&L applying 1mm thick wall care putty on walls and after drying the surfaces sand the putty smooth before painting complete all as specified and directed. |
| 3 | M&L applying 1mm thick wall care putty on ceilings and after drying the surfaces sand the putty smooth before painting complete all as specified and directed. |
| 4 | M & L for preparation ofsurface and applying two coats of Oil bound distemper on walls over a coat of primer complete all as specified and as directed by Engr-in-Charge. |
| 5 | M&L preparation of wall andapplying two coat of cement based paint on wall over one coat of primer complete all as specified and as directed by Engr-in-Charge. |
| 6 | M&L for preparation of old surface and applying one coat of cement based paint complete all as specified and as directed by Engr-in-Charge. |
| 7 | M & L for preparation of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489:2004, alkali & fungal reistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon aditives at 1.43 ltr/10sqm over and including priming coat of exterior primer applied at 0.90ltr/10sqm complete all asspecified and directed by Engineer-in-Charge. |
| 8 | M & L for preparation of surface of ceiling including cornices and apply two coats of oil bound distemper over a coat of primer complete all as specified and directed by the Engineer-in-Charge. |
| 9 | Demolition of brick work built in cement mortar including all quoions, arches pillar etc complete all as specified and directed by the Engineer-in-Charge. |
| 10 | M&L brick work with sub class \"B\" bricks(old size bricks) straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6complete all as specified and directed. |
| 11 | Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 12 | M & L for rendering 10 mm thick on fair face of brick walls or concrete surface in CM 1:6 complete finished even and smooth without using extra cement complete all as specified and directed. |
| 13 | M & L for rendering 15 mm thick on fair face of brick walls or concrete surface in CM 1:4 complete finished even and smooth without using extra cement complete all as specified and directed. |
| 14 | M & L for rendering 5 mm thick on ceiling or concrete surface in CM 1:3 complete finished even and smooth without using extra cement complete all as specified and directed. |
| 15 | M&l for GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps,neccesary fitting for fiiting cutting and waste complete all as specified and directed. |
| 16 | Hacking out old broken glass from metal frame including punching or drilling out old glazingcomplete all as specified and directed. |
| 17 | M & L for 4mm thick plain sheet glass ordinary quality including glazing with putty area area n.exc 0.5 Sqm in each pane complete all as specified and directed. |
| 18 | Taking down chowkhat with shutter without taking off shutter from chowkhatof any description not exceeding 1.5 Sqm each completeall as specified and directed. |
| 19 | Taking down chowkhat with shutter without taking off shutter from chowkhatof any description not exceeding 1.5 Sqm but not exceeding 4 Sqm each completeall as specified and directed. |
| 20 | M&L for PCC1:2:4 type B-1 20 mm graded aggregate as in concrete for fixing holdfasts/coping for bed blocks etc complete all as specified and directed |
| 21 | S & F for pressed steel door frames of size 125 x 60mm for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed. |
| 22 | S & F30mm thick flush door shutters solid core construction, with block board core and plywood face panels, commercial type on both sidefixedto chowkhat all complete all as specified and directed. |
| 23 | M & L for PCC type C-1 (1:3:6) using 12.5mm graded stone aggregate as in filling of hollow pressed steel frame etc complete all as specified and directed. |
| 24 | S & F 35 mm thick 2nd class hard wood glazed and skelton door shutter, open rebated and prepared to receive glass, gauze, etc(without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads forscuring glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I,section 8, clause 8.24 (a); supplied and fitted to chowkatscomplete all as specified and directed. |
| 25 | S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed . |
| 26 | S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MSframe shall be covered with heat moulded plain colourPVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – I 2009 complete all as specified and directed. |
| 27 | S&F butt hinges medium weight cold rolled mild steel 100mm size, ISI marked complete all as specified and directed |
| 28 | S&F Aluminum anodised barrel tower bolt of extruded section and fixed 125 mm long complete all as specified and directed . |
| 29 | S&F 150mm size extruded aluminium alloy handles, fabricated type,anodised complete all as specified and directed . |
| 30 | S&F 250mm aluminium alloy, anodised,sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections and fixingboltts and sliding bolts of extrude section or cast aluminium complete all as specified and directed . |
| 31 | S&F Butt hinges, heavy weight, cold rolled mild steel, and fixed 75mm longcomplete all as specified and directed . |
| 32 | S & F MS framed work such as grills, gratings, frames,holdfast etc with ends of bars shouldered and or riveted or forgot into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work complete all as specified and directed. |
| 33 | S & F steel windows with side hung shutters including projecting type hinges with steel handleandpeg stay complete with glazing bars, dovetailed or welded complete all as specified and directed |
| 34 | S & F steel windows with side hung shutters including projecting type hinges with steel handleandpeg stay complete without glazing bars, dovetailed or welded complete all as specified and directed. |
| 35 | S & F steel window or ventilator fixed type with glazing bars etccomplete all as specified and directed. |
| 36 | S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 37 | M & L for 4mm thick plain sheet glass ordinary quality including glazing with putty area area n.exc 0.5 Sqm in each pane complete all as specified and directed. |
| 38 | S&F in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 39 | M & L for preparation ofwooden surface exceeding 10Cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engr-in-Charge. |
| 40 | S&F in repair floor door stopper of aluminium alloy body and tongue of overall size 150mm, anodised,with hard drawn steel spring,fixed in floor complete all as specified and directed . |
| 41 | S & F300mm MS ordinary rat tail rod pattern springs, incl roller and roller plate complete all as specified and directed . |
| 42 | M & L for preparation of new or previously untreated surface of steel or steel based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed . |
| 43 | M & L for preparation of old wooden surface exceeding 10Cm width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge. |
| 44 | M & L for preparation of old steel surface exceeding 10Cm width or girth and apply one coat of synthatic enamel paint complete all as specified and as directed by Engr-in-Charge. |
| 45 | S & F in repairs 15mm CP pillar cock complete all as specified and as directed by Engr-in-Charge. Make:-CeraCat Part No F1018101 or equivalent make as specified in Appx B list of makes. |
| 46 | S & F in repairs 15mm CP sink cock with 150mm long swivel spout & wall flange complete all as specified and directed .Make Cera Cat Part No F1018251or equivalent make as specified in Appx B list of makes. |
| 47 | S & F in repairs 15mm CP angle cock with wall flange complete all as specified and directed . Make Cera or equivalent with Cat Part No F1018201 or equivalent make as specified in Appx B list of makes. |
| 48 | S & F in repairs overhead rain shower SS 150mm dia complete all as specified and directed. Make :-CeraCat Part No F7010211SS or equivalent make as specified in Appx B list of makes. |
| 49 | S & F in repairs towel rail 600mm complete all as specified and directed. Make :- CeraCat Part No F5007103 or equivalent make as specified in Appx B list of makes. |
| 50 | S & F in repairs 110 mm PVC (SWR) Pipes single socketed in any length with rubber ring joints fixed to wall and floors complete all as specified and directed. |
| 51 | S & F in repairs soap dish complete all as specified and directed. Make :- . Cera Cat Part No F5007106 or equivalent make as specified in Appx B list of makes. |
| 52 | S & F in repairs ball brass valves,high pressure, with polythelne float and fly nutin 20mm bore complete all as specified and directed. |
| 53 | Dismantling water tanks of 500 Ltrs capacity complete all as specified and directed. |
| 54 | S & F Rotational moulded polethelene water storage tanks in 500 litres capasity (cylinderical vertical & triple layer with closed top) hoisted and fixed in position all as specified in SSR Pt-I complete, ISI marked, complete all as specified and directed. |
| 55 | S & F in repairs 15mm CP bib cock with nozzle and flangecomplete all as specified and directed. Make Prayag Cat Part No 7305 or equivalent make as specified in Appx B list of makes. |
| 56 | S & F in repairs concelated stop cock 15mm with flange complete all as specified and directed. Make PrayagCat Part No 7318 or equivalent make as specified in Appx B list of makes. |
| 57 | S & F in repairs 110mm PVC (SWR) \"P\" trap complete all as specified and directed. |
| 58 | S & F in repairs 110mm PVC (SWR) \"S\" trapcomplete all as specified and directed. |
| 59 | S & F in repairs vitreous china squatting pan, \"Orissa\" pattern, size 580 x 440 mm, white, with integral foot rests complete including provision of lime concrete bedding and connection to trap, & to flushing pipe, anti-syphonage pipe, etc, complete including making good to floor complete all as specified and directed. |
| 60 | S & F in repairs white 10 Ltrs PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipe complete all as specified and directed. |
| 61 | S & F in repairs wash hand basin, vitreous china (flat back or angle back type)550x400mm size, including cutting for and pinning in ends of brackets or erecting stand including brackets complete all as specified and directed by Engr-in-Charge |
| 62 | S & F in repair 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 63 | S & F in repair grating doom 100mm dia of PTMT (Min weight 25 gms) complete all as specified and directed. |
| 64 | S & F in repair PVC connection pipe 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 65 | S & F in repair PVC connection pipe 15mm size with PTMT nuts of length 750mm complete all as specified and directed. |
| 66 | S & F in repairs PVC waste pipe complete all as specified and directed. |
| 67 | S & F in repairs SS plate rack of size 787 x 762 x 254mm of 0.60mm thickness fixed with necessary fixing arrrangements including neessary fasteners, screws etc complete all as specified and directed.Make BluestarCat Pat No SSKPR-314 or equivalent make as specified in Appx B list of makes. |
| 68 | S&F in repair mild steel chromium platedcurtain rod 20 mm dia incl. bracketsetc complete all as specified and directed |
| 69 | S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed |
| 70 | S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mmbowl size 410mm x 330mm x 160mm complete all as specified and directed |
| 71 | Dismantling floor, hearth or wall tilling including cement mortar bedding(but not backing), and rubbish offpremises etccomplete all as specified and directed by Engr-in-Charge. |
| 72 | M & L coloured non-skid ceramic tiles joint free ceramic tiles 7 to 8 mm thick( square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge. |
| 73 | M&L coloured glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick/300mm x 200mm x 6to7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick backing coat in cement mortar 1:3 complete all as specified and directed by Engr-in-Charge. |
| 74 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness complete all as specified and directed by Engr-in-Charge.. |
| 75 | M&L for PCC1:3:6 type C-2 using 40mm graded stone aggregate as in sub base to floor etc complete all as specified and directed by Engr-in-charge. |
| 76 | M & L for 40 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in floor finished even and smooth with usingextra cement complete all as specified and directed by Engineer-in-Charge. |
| 77 | M&L providing Chequered cement concrete tiles 25cm x 25cm x 20-22mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigmentlaid over and includingscreed bed or bedding layer 20 mm thick in cm 1:6 as in floors complete all as specified and directed. |
| 78 | Note:- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ.(ii) Make of material shall be as per mentioned in Particular specifications or Appendix \"B\" to Particular specifications as approved by AGE (I) AF manauri |
