|
| 1 | S&F pre- coated coloured galvalume Aluminum Zinc coating GI based corrugated (profile pattern) steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa and AZ150 as in roof covering/ clading to wall, including crimping sheet at endfixed with self tapping screwsincluding dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets roofing complete all as specified and directed. |
| 2 | S&F 0.45 mm thick galvalume Aluminum Zinc coating GI based corrugatedsteel sheetfor ridge having tensile strength of 550 Mpa and AZ150 fixing for closing gable truss suitable for profile pattern sheetfixed with self driving screws including dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets roofing complete all as specified and directed. |
| 3 | Dismantling framed timber scantlings 40 sq. cm & over in section, in any position complete all as specified and directed |
| 4 | S&F of structural steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed. |
| 5 | M&L Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer of surfaces over 10cm width or girth, complete all as specified & as directed. |
| 6 | M&L forPCC ( 1: 2: 4) type B-1 (using 20 mm graded stone aggregate) etcon roof top as a leveling course / paddingto maintainthe slope,finished the surface even and fair without using extra cement complete all as specified & as directed. |
| 7 | M & L for 10mm thick plaster in CM 1:4 mixed with water proofing compound @ 3% by weight of cement applied over roof slab complete all as specified (Note : WPC will be paid separately) |
| 8 | M&L for water proofing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/Sqm including taking down of old roof treatment of any description including mud phushka, lime, concrete, tiles, cement plaster padding upto n exc 20 cm depth from roof surface etc including cleaning, brushing and watering to joints and grooves and removing debris to a distance exc 1.5 km complete all as specified and directed. The height of the roof may upto 9 m comprising with following items: -(i) The surface of roof, parapet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus, mass dust etc by wire brushing and dusting.(ii) Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kg per sqm to be applied on prepared surface till the surface is properly impregnated.(iii) Applying one coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm.(iv) Laying of water proofingAPP modified polymeric water proofing membrane HMHDPE 4 Kg plain(total weight of the finished membrane not less than 4.0 kg/ sqm ± 5 % per sqm) ( thickness 2.8 mm )composed of 100 micron (+10% ) high density polyethylene sheet (HMHDPE) as centre core, which is sandwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps100 mm as per manufacture instruction etc.(v) Applying one coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm.(vi) Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces, complete all as specified and directed. |
| 9 | Supply and fix 600mmx600mmx4mm thick ‘E’ Board ClassicDesign Lake & hill as in false ceilingincluding supply and fixingGI ‘Tee” grid frame work made of special section of M.S galvanized sheet 0.30mm thick , bottom portion painted with cellular nitro painting, warping the suspending wire around theexistingwooden/steel purlin /rafterfor suspending grid frame work of size 605mmx605mm suspendedwith 4 mm dia GI wire @ 1200mm c/c on main Tee and fixed to T-grid with the help of level clip oras per manufacturer direction.The section consisting of main Tee 37mmx24mmx0.60mm, cross runner tee 37mmx24mmx0.60mm and perimeter angle of 24mmx24mmx0.50mm thick. Perimeter angle to be fixed to wall with GI screw of 40mm long @ 450 mm c/calong the perimeter of wall including applyingtwo coats of distemper oil emulsion complete all as specified and directed including Dismantlingof Wallandceilingboards(fibre, pulp, insulation, etc.) or insulationboards/slabs/ blankets, any thickness and any description, including cover fillets etc, complete all as specified & as directed. |
| 10 | M&Lsquared rubble walling jodhpur type regular coursedwell bonded, bedded and solidly hearted, built in cement mortar (1:6)including demolition of stone masonry, built in cement mortar incl all quoins, arches, pillars, etc and removing of rubbish off the premises complete all as specified and directed. complete all as specified and asdirected. |
| 11 | Demolition of brickwork or stone/boulder masonry, built in cement or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified & directed. |
| 12 | M&L Brick work with sub class \"B\" bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified & as directed. |
| 13 | M&L Brick work with with sub class \"B\" bricks, straight orcurved on plan to any radius in half brick thick wallbuilt in cement mortar (1:4) complete all as specified & as directed. |
| 14 | M & L for rendering 20 mm thickcement plaster in cement mortar 1:6on stone masonary fair faces / other than fair faces finished surfaces of brick wallfinishing the surfaces even and smoothwithout using extra cement etc. complete all as specified & directed. |
| 15 | M & L for rendering 15mm thickcement plaster on wallin cement mortar 1:6on brick wall / Concrete surfaces offinishing the surfaces even and smoothwithout using extra cement etc. complete all as specified & directed. |
| 16 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etccomplete all as specified & directed. |
| 17 | M & L for dubbing out average 10 mm thick on irregular face of walls with cement mortar (1:4) complete all as specified & as directed. |
| 18 | M & L for dubbing out average 10 mm thick on irregular face of walls with cement mortar (1:6) complete all as specified & as directed. |
| 19 | Material and labour for plastering 15 mm thickon fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:4 with integral water proofing compound finished even and fair complete all as specified and as directed. Note: - Water proofing compound shall be measured and paid for separately. |
| 20 | Material and labour for plastering 10 mm thick on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed. |
| 21 | Material and labour for plastering 10 mm thick on fair faces of brick work or concrete surfaces on ceilings in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed. |
| 22 | Supplying only Integral waterproofing compound ISI marked complete all as specified and directed. |
| 23 | M&L for 25mm thick PCC (1:2:4) type B-1 using 20 mm graged stone aggregate as in floors finished rough to receive the tilescomplete all as specified & directed. |
| 24 | M&L nonskid coloured ceramic tiles 7 to 8 mm thick area of each tile exc 0.11 Sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match coiour/shade including 15mm thick screed bed layer in CM 1:6 ncluding dismantling offloor, hearth tiling including cement mortar beddingand removing of rubbish off the premises complete all as specified. |
| 25 | M&Lglazed ceramic coloured tiles on vetical surfaces size 600x300x7mm to 8 mm thick over & including 10mm thick renderingin CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade /colour of tiles ncluding dismantling offloor, hearth tiling including cement mortar beddingand removing of rubbish off the premises complete all as specified. |
| 26 | Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters(with out taking off shutters from the frames) complete all as specified and directed. |
| 27 | Taking down chowkhats or frame n exc 1.50 Sqm each with shutters(with out taking off shutters from the frames) complete all as specified and directed. |
| 28 | S&Fpressed steel frames of size 125mm X 60 mm withrebate on both side including necessary fixing lugs, hinges, locks strike plate etc(thickness ofsheet shall be 1.25mm) complete all as specified and directed. |
| 29 | S&Fpressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs, hinges, locks strike plate etc(thickness ofsheet shall be 1.25mm) complete all as specified and directed. |
| 30 | M&L PCC 1:3:6type C-1 using 20 mm graded stone aggregates as in filling of hold fast,chowkhats etc, complete all as specified and directed. |
| 31 | S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed. |
| 32 | S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as specified and directed. |
| 33 | S&F stainless steel wire cloth 0.36 mm nomiral dia and wire and average width of aperture 1.40 mm fixed with stainless steel wire staples complete all as specified and directed |
| 34 | S&F3.0 mm thicksheetglass ordinaryquality and glazing with oil putty in square nexc 0.5 sqm in each pane complete all as specified & directed. |
| 35 | S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed |
| 36 | Supply & fixing factory made PVC door frame of size 50 mm x 47 mm made out of 5 mm prelam PVCsheet cut at corner and jointed with 02 Nos 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number & minimum 02 Nos. for horizontal member) complete all as specified and directed. |
| 37 | S&F 35mm thickFlush shutters , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 38 | S&F 35mm thick 2nd class hardwoodglazed and skeleton shutters open rebated and prepared to receive glass gauge etc (without sash bars) edges of farrming plain chamfered or rounded fitted with cut and mitred beads for securing glass etc ,size of member of shutter as specified in SSR Part -I ,section 8,clause 8.20(a) supplied and fitted to chowkats complete all as specified and directed. |
| 39 | S & F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face,incl 03 Nos of 100mm size stainless steel butt hinges for each shutter, supplying & fixing in frame at site as per specification & drawing, suppling & fixing in the frame at site as per specification & drawingcomplete all as specified and directed. |
| 40 | S & F powder coated, minimum thickness 50 micron, aluminium sections for doors, windows, ventilators, door partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, and rubber beadings for fixing glass panes in frame complete all as specified and directed.Note : (i) Glass panes, wire mesh & handle will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading however it will be not be weighed and not paid separately.(iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. |
| 41 | Supply & fixd 4mm thick frusted glass , fixed with steel, aluminium, metal frame work in windows/ doors/ partitions/ ventilators including rubber beading complete all as specified and as directed. |
| 42 | S & F 15 micron coloured aluminium anodised grill of weight not less than 2.5 Kg per sqm complete all as specified and as directed. |
| 43 | S & F aluminium wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and as directed. |
| 44 | M&L for PCC 1:3:6type C-1 (using 20mm graded stone aggregates) as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed. |
| 45 | S&F aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 46 | S&F butt hinges medium weight cold rolled mild steel of 125 mmand fixed with screw complete all as specified and directed. |
| 47 | S&F aluminium anodised barrel tower bolts of extruded section, length of bolt in 200 mm and fixed with machine made screwscomplete all as specified and directed |
| 48 | S&F aluminium handles 150 mm size, cast type, anodised. and fixed with machine made screwscomplete all as specified and directed. |
| 49 | S&F mild steel300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 50 | M&L for preparation of new wooden surfaces of any description, not otherwise described over 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 51 | M&L for two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old surfaces complete all as specified and directed. |
| 52 | M & L for prepration of newly plastered wall sufaces & applyingtwo coats exterior emulsion weather proofpaint over one coat of exterior wall primer complete all as specified and directed. |
| 53 | M & L for prepration of new wall surfaces & applyingbirla / J. K. wall care whiteputty 2 mm thick for levelling the surfaces including properly making of v shape crakes and filling of all crakes with crakes seal of walls and applying two coat of interior emulsion paints over a coat of wallprimer incl. preparation of surfaces ofwalls etc complete all as specified and directed. |
| 54 | M &L for applying three coats of white wash on newly plastered ceilingsurfaces including preparation of these surfacescomplete all as specified and directed. |
| 55 | M&Lfor complete removal of existing treatment on walls and prepration of old surfaces and applyingtwo coats of exterior emulsion weather proofpaint over one coat of exterior wall primer including properly making of v shape crakes and filling of all crakes with crakes seal of walls complete all as specified and directed. |
| 56 | M & L for complete removal of existing treatment on wall and prepration of old surfaces & applyingbirla / J. K. wall care whiteputty 2 mm thick for levelling the surfaces including properly making of v shape crakes and filling of all crakes with crakes seal of walls and applying two coat of interior emulsion paints over a coat of wallprimer incl. preparation of surfaces ofwalls etc complete all as specified and directed. |
| 57 | M &L for applying two coats of white wash on old decorated ceilingsurfaces includingprepration of old surfaces complete all as specified and directed. |
| 58 | Demolition of PCC and pavings n exc 15 cm thickness below or above ground level (unreinforced) including removal of deberies all as specified and directed. |
| 59 | M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in mass concrete as in foundation filling and mass concrete complete all as specified and directed. |
| 60 | M&L for 75mm thick PCC 1:3:6type C-2, (using 40mm graded stone aggregates) as in plinth protection surface finished even and smooth without using extra cement & provided with construction jointon the interval not more than 3.0m and filled with bitumen and sand mortar in 1:3 complete all as specified and directed. |
| 61 | M&L for mirror polished Machine cut kota stone slab flooring 18-20 mm thick size not less then 550X550 mm over 20 mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing including dismantling of Kota stones and tileslaid, bedded and pointed in any mortar of any description or thicknessetc complete all as specified and directed complete all as specified and directed. |
| 62 | M&L for Kota stone flooring 16- 18 mm thick in riser of steps, skirting, dado etc size not less than 550mm mirror polished Machine cut Kota stone laid over and including 15 mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & mirror polishing including dismantling of Kota stones and tileslaid, bedded and pointed in any mortar of any description or thicknessetc complete all as specified and directed |
| 63 | M&L for grinding and polishing mirror finish of existingKota stone slab flooringcomplete all as specified and as directed. |
| 64 | M&L for 18mm to 20 mm thick Granite slabof any shade( table rubbed and polished ) machine cut for floor /shelvesin steps, jambs, pillars, window cills& cooking plateforms over 15 mm thick cement mortor 1:4including pointing in whitecement 1:2 using marble dust with admixture of pigment to match shade of the slabslaid bedded and pointed in any mortor complete all as specified and directed |
| 65 | M&L for rounding to the edge of stone slabs oneedgesuch as in steps, cooking plateform and other similar situations complete all as specified &directed. |
| 66 | M&L for cutting chases, pinning in, Stone, concrete block or slab wallsfor concealed water tubing and making good, in cement mortor 1:3 cutting not exceeding 20cm girth complete all as specified and directed. |
| 67 | S&F 15mm Galvanised Mild steeltubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors incl taking down 15 mm diaGI tubing and connectioncomplete all as specified and directed. |
| 68 | S&F 20mm Galvanised Mild steeltubing medium grade galvanisedwith all fittings and fixed complete to walls and ceilings or laid in floors including taking down 20 mm diaGI tubing and connectioncomplete all as specified and directed. |
| 69 | S&F in repairs brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges fixed with and including chromium plated screws and wooden /plastic cleats (min wt 190 grams) complete all as specified & directed. |
| 70 | S& Fin repairs looking mirror ofselected quality glass 5 mm thick mounted on 6 mm thick water proof plywood with designer beading frame,fixed to wooden/pvc plugs with chromium plated brass screws and cup washers etccomplete all as specified and directed. |
| 71 | S&F in repair vitreous china squatting pan “ORISSA” pattern size 580mm X 440mm, white with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) andincluding connection to trap & to flushing pipe anti syphonage pipe etc (excluding flushing cistern) complete including making good to floor complete all as specified and directed. |
| 72 | S & Fin repair PVC valveless Syphonic action type, Flushing cistern 10 litres capacity low level, white with inlet ball valve float handle and flush pipe 32 mm bore and brackets,complete all as specified and directed. |
| 73 | S&Fin repair vitreous china wash hand basin white flat back of size 550mmx400 mm (overall) and including cutting for and pinning in end of brackets,32 mm waste fittings,brass chromium plated for glazed ware sinks,basins etc.with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed.and flush pipe of polytethylene of low or high density or PVC 32 mm dia incl waste pipe and with centrally fixed brass chroium plated 15 mm bore pillar tap fancy type including32 mm sink couplingcomplete all as specified and directed. |
| 74 | S&F in repair sinks made of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed. |
| 75 | S&F in repair vitreous china urinal half stall type flat back of size 375mmx395mmx590mm (minimum) whitewith grating and union for discharge pipe, waste pipe, urinal spreader PTMT incl PVC connection 15 mm bore and 450 mm long complete all as specified and directed. |
| 76 | S&F in repair bib taps, cast copper alloychromium plated fancy type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed. |
| 77 | S & F in repairs brass chromium plated shower rose fancy type , as approved by GE, with or without swivel joints, including fixing to steel pipe complete all as specified and directed. |
| 78 | S&F PVC connections 15mm bore size 450 in length with both endbrass/pvc high quality nuts complete all as specified and directed. |
| 79 | S&F in repairs stop valves/angle valve 15mm bore cast copper alloy chromium plated, fancy type, cast copper alloy screwed down, high pressure,with scrutch or butter flyhandle screwed both ends for iron pipe or for unions,complete all as specified and directed. |
| 80 | S&F in repairs CP angle valve / concealed stop cock cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed bnoth ends for iron pipe 15mm bore dia in repair, complete all as specified and directed. |
| 81 | S&F in repair 25 mm bore SS Pipecurtain rods including SS Brackets & SS Decorative dome, suitablefor door/widows curtain with fancy type SS dooms with ss brackets fitted to each endandfixed to wallincl. removal of existing rod and making good etc complete all as specified and directed. |
| 82 | S&F in repairs 110mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointedlaid in trenches or in floors complete all as specified and directed. |
| 83 | S&F in repairs 110mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointedandfixed to walls complete all as specified and directed. |
| 84 | S&F in repairs 75 mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointedlaid in trenches or in floors complete all as specified and directed. |
| 85 | S&F in repairs 75 mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed fixed to wall complete all as specified and directed. |
| 86 | S&FPVC (SWR) bends 110 mm dia complete all as specified and directed. |
| 87 | S&F PVC (SWR) bends 110 mm dia with access door complete all as specified and directed. |
| 88 | S&F PVC (SWR) bends 75 mm dia complete all as specified and directed. |
| 89 | S&F PVC (SWR) bends 75 mm dia with accessable door complete all as specified and directed. |
| 90 | S&F PVC (SWR) 110 mm diajunction, single(single \"T\")equal or unequalwith acess door complete all as specified and directed. |
| 91 | S&F PVC (SWR) 75 mm diajunction, single(single \"T\")equal or unequal complete all as specified and directed. |
| 92 | S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 93 | S& F in repairs of 75mm dia PVC (SWR) multi floor trap with Hinge type SS grating including jointing with solvent cement etc. complete all as specified and directed. |
| 94 | M&L for 15mm thick Plastering in CM 1:4, with water proofing compound at the rate of 3% by weight of cement and finishing the surface even and fair.(WPC will be measured and paid seperately) in sunken portion including rubbish off the premises complete all as specified and directed. |
| 95 | M&L applying evenlytwo coats of industrial bitumen 85/25 at the rate of 1.20 Kg/Sqm in each coat over vertical surfaces and floors of sunken floors of toilet/bath including cleaning of surfaces complete all as specified and directed. |
| 96 | M&L PCC 1:7:12 type F2 using 40 mm graded Brick /stone aggregate as in filling (sunken portion) etc including removal of existing fillers complete all as specified and directed. |
| 97 | Taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch,sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor etc complete all as specified and directed. |
| 98 | Taking down main switch, DB/change over/VTPN, MCCB AC box of any capacity complete all as specified and directed. |
| 99 | M&L for concealed point wiring with 1.5 Sqmm PVC-FRLSH insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit,includingmodular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows,etc. of External diameter 20mmall as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and directed. |
| 100 | For one light, fanpoint controlled by one switch |
| 101 | For one5 Amp independent socket point controlled by one switch |
| 102 | For one 3 pin ,5 Amp socket point with other switch on the same board |
| 103 | All as per item No 99 here in before but for power point wiring usingwith 2.5sqmm PVC-FR LSH insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed. |
| 104 | S&F Modular switch, one way, 6 Amp 230, 1 modulecomplete all as specified and directed. |
| 105 | S&F socket Modular 6 Amp-2/3 pin combined 2 modulecomplete all as specified and directed. |
| 106 | S&F switch Modular, single pole, one way,16 Amp ,1 module 230 Voltcomplete all as specified and directed. |
| 107 | S&F socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Voltcomplete all as specified and directed. |
| 108 | S&F ceiling rose, surface backlite,three terminalcomplete all as specified and directed. |
| 109 | S&F Modularlamp holder insulated with back plate suitable for Angle/Batten fittingcomplete all as specified and directed. |
| 110 | S&F modular fan step regulator 60-80W2 modulecomplete all as specified and directed. |
| 111 | Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rosecomplete all as specified and directed. |
| 112 | Supply and fixing LED light fitting mirror type withhigh out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable sizecomplete all as specified and directed. |
| 113 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable sizecomplete all as specified and directed. |
| 114 | S&F LED bulb 10 wattsuitable for angle / batten holder fittingcomplete all as specified and directed. |
| 115 | Taking down and refixing connecting of Ceiling fan and exhaust fan after, greasing complete all as specified and directed. |
| 116 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)complete all as specified and directed. |
| 117 | Supply and fix exhaust fan, steel body AC single Phase. 230V , 50Hz,1200 RPM copper winding of sweep 300 mm with blades, and frame and louvers. Complete all as specified and directed. |
| 118 | M&L concealed sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size6 sqmm (for main current) drawn in & incl PVC conduitconduit less than 20mm dia ISI markedwith all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Greencomplete all as specified and directed. |
| 119 | M&L concealed sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 04 runs of 01 Single core of size10 sqmm (for main current) drawn in & incl PVC conduitconduit less than 25mm dia ISI markedwith all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of01 Single core of size 10 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth –complete all as specified and directed. |
| 120 | S&F testing and commissioning of MCB SP 6 Amp to 40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugscomplete all as specified and directed. |
| 121 | S&F testing and commissioning of MCB SP 63 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugscomplete all as specified and directed. |
| 122 | –do- but SPN 40 Amps, 240 Vcomplete all as specified and directed. |
| 123 | S&F sheet metal enclosureDB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 120-160 Amps rated bus bar of suitable sizecomplete all as specified and directed. |
| 124 | S&F sheet metal enclosureDB double door, IP-43 when MCBs to be used SPN, 12 way, 240 V with 120-160 Amps rated bus bar of suitable sizecomplete all as specified and directed. |
| 125 | S&F double door metallic sheet metal enclosureDBdouble door(DPX-125 ) VTPN suitable for housing 63 MCCBas incomer 4 Way 415 Volts with 120-160 Amps rated bus barscomplete all as specified and directed. |
| 126 | S&F MCCB 63 Amps 4 pole, suitable for 415 V breaking capacity 16 KA connected in wall/surface with wire and lugscomplete all as specified and directed. |
| 127 | M&L for provn of Earthing complete with galvanised steel earth plateelectrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steelall as shown in electric plate no 3 connected to earthing test point all as specified or indicated including testing on completioncomplete all as specified and directed.Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the costof the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs. |
