|
| 1 | TEMPORARY ILLUMINATION (TE - IL) |
| 2 | Providing temporary illumination consisting of LED tube light 4\" x 20w or Fluorescent tube light 4\" x 36/40w, 230v, 50 Hz having colour temp up to 6500k complete erected with mains and required switchgears with continuous earth wire erected and dismantled without using scaffolding up to three days. |
| 3 | Providing temporary illumination consisting of flood light fitting 1000/500W , 230v, 50Hz complete halogen fitting with lamp, holders, mains and required switchgears with continuous earth wire erected and dismantled without using scaffolding up to three days. |
| 4 | Providing temporary illumination consisting of LED flood light fitting 100w, having colour temp up to 6500k, IP65, housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete erected with mains, switchgears with continuous earth wire erected and dismantled without using scaffolding up to three days |
| 5 | Providing temporary illumination consisting of flood light fitting 200 W complete LED fitting having colour temp up to 6500k, IP65, housing of pressure die cast aluminium alloy and heat sink extruded aluminiumcomplete required switchgear erected and dismantled without using scaffolding up to three days. |
| 6 | Providing temporary illumination consisting of flood light fitting 300 W complete LED fitting having colour temp up to 6500k, IP65, housing of pressure die cast aluminium alloy and heat sink extruded aluminiumcomplete required switchgear erected and dismantled without using scaffolding up to three days. |
| 7 | Providing temporary illumination consisting of white/colour series lights with 8mm LED miniature lamps of 2 to 3.4V [1000nos] with cap with required switchgears erected and dismantled with rotor effect as approved without scaffolding up to three days. |
| 8 | Providing temporary illumination consisting of round LED/ neon flex LED/ flexible strip LED having 2 to 5 W capacity per meter and consisting suitable power adaptor with mains, required switchgears erected and dismantled without using scaffolding and maintaining the same up to 3 days |
| 9 | Providing temporary illumination consisting of water proof LED Par Light, 54 pieces x 3W, 230v, 50Hz, with RGBW controller complete erected with mains, switchgears with continuous earth wire erected and dismantled withoutusing scaffolding up to three days |
| 10 | Providing temporary illumination consisting of LED rope Light having 4 to 6 W capacity per meter [multi colour] and consisting suitable power adaptor with mains, switchgears erected and dismantled without using scaffolding and maintaining the same up to 3 days |
| 11 | Providing temporary oscillating type pedestal air circulators 600/900 mm or air cooler connected with necessary mains, required switchgears with continuous earthing maintaining the same during the function and including dismantling up to three days. |
| 12 | Providing temporary oscillating type pedestal fan 16\" (400 mm) or ceiling fan [1200/1400mm], 230v,50Hz connected with necessary mains, required switchgears with continuous earthing maintaining the same during the function and including dismantling up to three days. |
| 13 | Providing temporary oscillating type pedestal mist fan 16\" to 26\" having 10-25 ltrs water tank 230v 50Hzconnected with necessary mains, required switchgears with continuous earthing maintaining the same during the function and including dismantling up to three days. |
| 14 | Providing temporary evaporative air cooler (desert cooler) with 230V, 50 cycles, with 12\"-18\" exhaust, minimum 40 to 80 litre water capacity tank connected with necessary mains, required switchgears with continuous earthing maintaining the same during the function and including dismantling up to three days. |
| 15 | Providing temporary 120/150 litre capacity water cooler with water filter (candle type or UV tube) with M.S. stand complete with minor plumbing work if necessary connected with mains, required switchgears and continuous earthing maintaining the same during the function and including dismantling for three days. |
| 16 | Providing temporary plug point with 3 pin 6A/16A with necessary mains, required switchgears and continuous earth connection up to three days. |
| 17 | Providing temporary plug point with 3 phase industrial socket having CRCA sheet metal enclosure with 30A, 3 pin plug and earth socket and 30A, 3 pin, plug top with 30A, triple pole MCB, mains, switchgears with continuous earth wire up to three days |
| 18 | Providing temporary XLPE/PVC armoured cable 4 core 50 sq mm Aluminium conductor with continuous 12 SWG G.I. Earth wire complete erected with gland and lugs and switchgears and required cable protector wherever necessary up to three days |
| 19 | Providing, maintaining and operating temporary public address system on hire consisting 02 Nos. solid state heavy wattage amplifier 250 watts ( one for working and another for stand by emergency ) working on AC / generator and 24 volt car battery supply, 06 Nos. of matching of 100 volt line (200 watts) box type speakers/sound column, 02 Nos super sensitive microphone with suitable size of microphone holding stand. The system shall be in a fully automatic change over operation in case of failure of supply for one day. |
| 20 | Providing, maintaining and operating temporary PA audio mixing consoles -stereo with built-in MP3 player, 48V phantom supply on all channels professional mixer with 24 digital effects, 2 Group outputs. Mixer shall have 12 MIC and 10 line balanced mono inputs with enhanced headroom & each input channel has a gain control, 4 band active EQ controls, AUX1, AUX2, AUX3/EFX, AUX4/FX and PAN control with channel mute switch, with easy and accurate monitoring of left & right output levels through individual 12 segment LED array, 11 preset EQ settings & headphone output with level control for output monitoring. The system shall be in a fully automatic change over operation in case of failure of supply for one day. |
| 21 | Providing and maintaining temporary additional box type speaker of 100 Volt line ( 100 watts ) for one day. |
| 22 | Providing and maintaining temporary cordless ( Hand type or lapel type ) supersensitive UHF microphone (1 no stand by) for one day. |
| 23 | Hiring of Generators (TE-DG) |
| 24 | Hiring charges for supplying and maintaining 230/415 V, 50 cycles AC generating set 3 to 10 kVA capacity with necessary fuel, mains, switchgears and accessories complete with continuous running on load/no load as perrequirements complete with self certification. |
| 25 | Hiring charges for supplying and maintaining temporary 415V, 50 cycles ACgenerating set 11 to 20 kVA capacity with necessary fuel, mains, switchgears and accessories complete with continuous running on load/no load as per requirements complete with self certification. |
| 26 | Hiring charges for supplying and maintaining temporary 415V, 50 cycles ACgenerating set 25 to 40 kVA capacity with voltage regulation +/- 5 %, and complete set enclosed in composite acoustic enclosure to restrict sound level up to 75 dB at 1.0 m with necessary fuel, mains, switchgears andaccessories complete with continuous running on load/no load as per requirements complete with self certification. |
| 27 | Hiring charges for supplying and maintaining temporary 415V, 50 cycles ACgenerating set 25 to 40 kVA capacity with voltage regulation +/- 5 %, and complete set enclosed in composite acoustic enclosure to restrict sound level up to 75 dB at 1.0 m with necessary fuel, mains, switchgears andaccessories complete with continuous running on load/no load as per requirements complete with self certification. |
| 28 | Hiring charges for supplying and maintaining temporary 415V, 50 cycles AC generating set 100 to 125 kVA capacity with voltage regulation +/- 5 %, and complete set enclosed in composite acoustic enclosure to restrict sound level up to 75 dB at 1.0 m with necessary fuel, mains, switchgears and accessories complete with continuous running on load/no load as per requirements complete with self certification. |
| 29 | Providing and maintaining temporary 1.5 to 2 Ton capacity split type air conditioning unit complete with refrigerant R32 with temporary stand and fabrication work and required material to achieve cooling temperature connected along with necessary mains, required switchgears and continuous earthing maintaining the same during the function and including dismantling for three days. |
| 30 | Providing and maintaining temporary 2.5 to 3.5 Ton capacity tower type air conditioning unit complete with refrigerant R32 with temporary stand and fabrication work and required material to achieve cooling temperature connected along with necessary mains, required switchgears and continuous earthing maintaining the same during the function and including dismantling for three days. |
| 31 | Providing and maintaining temporary 4.5 Ton capacity tower type air conditioning unit complete with refrigerant R32 with temporary stand and fabrication work and required material to achieve cooling temperature connected along with necessary mains, required switchgears and continuous earthing, maintaining the same during the function and including dismantling for three days. |
