Tender For Misc Maintenance And Repair Work In Admin Block Mess And Officers Ac Hostel Building Block C At Eti Sarojininagar Lko - Laying and Jointing PVC Pipe. Heading 2 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: 3 Providing and laying in position cement concrete of 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)excluding the cost of centering and shuttering - All work up to plinth level, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 4 Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing.1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources), the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 5 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources), the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 6 Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 7 Steel reinforcement for R.C.C. work ready to use cut and bend rebars of approved make from factory/workshop to construction site including placing in position and binding all complete upto/above plinth level, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 8 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 9 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand),the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 10 Brick work with Cement mortar 1:4 (1 cement : 4 coarse sand) &common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 11 Half brick masonry with Cement mortar 1:4 (1 cement :4 coarse sand) & common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up ton floor V level,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 12 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels,Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 13 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 14 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 15 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters,35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 16 Providing and fixing ISI marked, IS : 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc. complete ,75x60x3.10 mm, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 17 Providing and fixing ISI marked oxidised 200x10 mm M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378),the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 18 Providing and fixing ISI marked 85x42 mm oxidised M.S. pull bolt lock conforming to IS : 7534 with necessary screws bolts, nut and washers etc. complete (Copper oxidised as per IS 1378), the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 19 Providing and fixing ISI marked oxidised 250x20x6 mm M.S. door latches conforming to IS:5930 with screws etc. complete (Copper oxidised as per IS 1378), the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 20 Providing and fixing ISI marked oxidised 100 mm M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378), the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 21 Providing and fixing special quality bright finished brass 40mm cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 22 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 23 Providing and fixing PTMT handles with necessary screws etc. complete.150x34x24 mm weighing not less than 26 gmsthe work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 24 Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 25 Providing and fixing factory made panel 30 mm thick pre laminatedPVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC C channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturers specification & drawing. 26 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete (Hot finished welded type tubes).,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 27 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 28 40 mm thick with 20 mm nominal size stone aggregate Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 29 18 mm thick Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 30 Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 31 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.., complete,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 32 Providing and laying vitrified floor tilesin different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:3 (1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.(600mmx600mm) 33 Providing and laying Vitrified tilesin different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately), the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 34 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.(Size 600mm x 600mm) 35 Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles,included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 36 Providing corrugated G.S. sheet roofing (0.80 mm thick with zinc coating not less than 275 gm/m²)including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, ,included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 37 Providing and fixing on wall face 110 mm diameter unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 38 Providing and fixing on wall face 110mm unplasticised - PVC moulded Coupler for unplasticised Rigid PVC rain water pipes, included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 39 Providing and fixing on wall face 110mm unplasticised - PVC moulded Single tee with door for unplasticised Rigid PVC rain water pipes, included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 40 Providing and fixing on wall face 110mm unplasticised - PVC moulded Bend 87.5° for unplasticised Rigid PVC rain water pipes, included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 41 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. 42 12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand)the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 43 12 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand)the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 44 20 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand) the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 45 12 mm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 46 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 47 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications,Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 48 Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 49 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 50 Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 51 Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in-charge (payment for providing grooves shall be made separately), the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 52 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 53 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour (One Coat),the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 54 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 55 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade (One or more coats on old work),the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 56 Painting with aluminium paint of approved brand and manufacture to give an even shade (One or more coats on old work),the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 57 Polishing on Old wood work with ready made wax polish of approved brand and manufacture the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 58 Finishing walls with Acrylic Smooth exterior paint of required shade Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 59 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.(With Cement Mortar 1:4 (1 cement , 4 coarse sand) 60 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 61 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 62 Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge. 63 Providing & fixing White vitreous china water closet squatting pan (Indian type) (Orissa pattern W.C Pan of size 580x440 mm) along with S or P trap including dismantling of old WC seat and S or P trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. 64 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malbathe work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 65 Demolishing cement concrete Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 66 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. 67 Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge. 68 Demolishing brick work In cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 69 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead ,Of area 3 sq. metres and below, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 70 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 71 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of (G.S. Sheet) 72 Dismantling 15 mm to 40 mm nominal bore G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge . 73 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 74 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 75 Providing and laying 60mm faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. 76 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. 77 Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-incharge. (Old CC paver blocks shall be supplied by the department free of cost). 78 Providing and laying matt finished vitrified tile of size 300x300 or approved by E/I having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 79 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 80 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: White glazed fire clay kitchen sink of size 600x450x 250 mmincluded cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 81 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 82 Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make (a) 15 mm nominal dia included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 83 Providing and fixing 32 mm flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 84 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 85 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. 86 Providing and fixing 15 mm Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge (Internal work - Exposed on wall) . 87 Providing and fixing 25 mm Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge (Internal work - Exposed on wall) . 88 Providing and fixing 15 mmChlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge (Concealed work, including cutting chases and making good the walls etc).. 89 Providing and fixing 25 mmChlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge (Concealed work, including cutting chases and making good the walls etc).. 90 Providing and fixing 65 mm G.I. pipes complete with G.I. fittings including trenching and refilling etcthe work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 91 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. (25 mm to 40 mm Nominal Bore) 92 Providing and fixing 65mm gun metal gate valve with C.I. wheel of approved quality (screwed end) , the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 93 Providing and fixing 25mm ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 94 Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe (45 cm length) with brass unions, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 95 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 96 Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 97 Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms 98 Providing and fixing 15 mm C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 ,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 99 Providing and fixing 15 mm C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge 100 Providing and fixing aluminium work for For fixed portion of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)) 101 Providing and fixing aluminium work for For Shutter of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)) 102 Providing and fixing glazing With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.. (Cost of aluminium snap beading shall be paid in basic item). 103 Providing and fixing double action hydraulic floor spring With stainless steel cover plate minimum 1.25 mm thickness of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. 104 Filling the gap in between aluminium frame (Upto 5mm depth and 5 mm width) & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 105 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with waterproofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours,(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 106 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compoundconsisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entiretreatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 107 Providing, mixing and applying bonding coat of Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. 108 Providing and fixing in place a full height storage cabinet 450 mm deep made with 19 mm thick ISI marked ply borad, all interior surfaces to finished with pasting of 0.8 mm thick mica and all exterior surfaces to be finshed with pasting of 1 mm thick mica of texture and colour as approved by Engineer in Charge including all labour, T&P, other items like (but not limited to) fevicol, nails screws, higes, sliders,door handles, multipurpose lock of godrej or equivalent rate etc. required for proper completion of works, to be measured interms of front area only. 109 2.5 cm thick 1:1.5:3 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. (without base CC). 110 Cleaning of septic tank including disposal of waste out side the UPPCL area as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work. 111 Providing and fixing sun-film of Gareware or equivalent make on glass panes of door and window shutters including cost of all materials,labour and T&P etc. required for proper completion of the work. 112 Attending to petty maintenance service like plumbing service,welder service, mansion service and carpenter service required as below. (Job attending by one no. Plumber/welder/mason /carpenter with one no. helper per hour or part of an hour.) 113 S/F of Waste Coupling Jaquar or Equivalent Model No-ALD-705L130 or as approved By engineer incharge,the work included cost of labour, material T&P etc for proper completion of work. 114 Supply and fixing of Health Faucet Jaquar or Equivalent Model ALD-573 or as approved By engineer incharge,the work included cost of labour, material T&P etc for proper completion of work. 115 Supply and fixing wall hung WS with normal closed seat cover Jaquar or Equivalent Model CNS-WHT-959JSPP as approved By engineer incharge,the work included cost of labour, material T&P etc for proper completion of work. 116 S/F ofBib Cock jaquar or Equivalent Model No-CON-047KN or as approved By engineer incharge,the work included cost of labour, material T&P etc for proper completion of work. 117 S/F of jaguar make flushing plate jaquar or Equivalent ModelNo-CHR 152415 or as approved By engineer incharge,the work included cost of labour, material T&P etc for proper completion of work. 118 Providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials,labour and T&P etc.required for proper completion of the work. 119 Providing and laying 110 MM SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. 120 Providing and laying 110 MM SWR, PVC ( Finolex or equivalent ) pipe BENDincluding cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. 121 Providing and laying 110 MM SWR, PVC ( Finolex or equivalent ) pipe SOCKETincluding cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. 122 Providing and laying 110 MM SWR, PVC ( Finolex or equivalent ) pipe Plain TEEincluding cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. 123 Supply and Fixing of 5 blade Exhaust fan ventile air dx 225 mm of Havells or equivalent make including all material, T&P etc required for proper completion of work as approved by engineer in charge. 124 Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect. 125 Applying BIRLA PUTTY or equivalent putty on previousaly bila putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work. 126 Supply of labor (Mazdoor) for sifting furniture, T&P & Otherrequired for proper completion of the work. 127 Supply and fixing 100 mm PVC Nahani Trap India make of heavy approved quality complete with CI grating,includingsupply of all materials,labour and T&P etc. required for proper completion of the work. 128 Providing and fixing 100 mm dia PVC P or S trap including cement concrete and all materials, labour cartage T&P etc.required for proper completion of the work.(For W.C.). 129 Repairng ofold cushioned Single seater Sofa removing of old damage upholstery as required then wooden frame repairing and re-polishing, upholstery of new 75 mm thick sleepwell foam 32 denstry on seat and back side of Sofa using 50 mm thick sleepwell foam 32 denstry, . The work include cost of all labour,material T&P required for proper completion of work as approved by the Engineer -in-Charge. 130 Repairng ofold cushionedThreeseater Sofa removing of old damage upholstery as required then wooden frame repairing and re-polishing, upholstery of new 75 mm thick sleepwell foam 32 denstry on seat and back side of Sofa using 50 mm thick sleepwell foam 32 denstry, The work include cost of all labour,material T&P required for proper completion of work as approved by the Engineer -in-Charge. 131 Providing and fixing superior,approved quality cotton curtain height approximately 2.65mtr upper side margin 0.05mtr, lower side margin 0.02 mtr, upper side margin fitted proper tape for hanging curtain with the help of hooks and rings Lucknow as per direction of Engineer in charge. The work includes cost ofall labour, material and T&P etc. 132 Repairing of old cushioned officer chair at, removing of old damage upholstery as Requied then wooden frame repairing and re-polishing, upholstery of new 75 mm thick sleepwell foam 32 denstry on seat and back side of chair using 50 mm thick sleepwell foam 32 denstry, The work includes cost ofall labour, material and T&P etc. 133 Providing & Fixing of Roller Blinds kazage make or equivalent of approved shade as per drawing & specificationas approved by the Engineer -in-Charge. 134 Providing and fixing4.0 mm thicknes ACP in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item). 135 Providing ,making & Fixing of 6mm PVC Wall Panneling on wall surface includingsupply of all materials,labour and T&P etc. required for proper completion of the work. 136 Supply and Fixing of 8 mm Table top Glasswith edge polish,the work included cost of labour, material T&P etc for proper completion of work. 137 Providing& making& fixing of Wall Panneling as per drawing from claded with 12mm water proof & Fire Retardent ply & final surface to be finised with 6 mm thickMDF & 1mm Laminate complete with painted or polishedas per the approved desin all complete as per drawing, specification and direction as approved by E/I. 138 Supply and Fixing of Basin Trap with regular swinging spout(wall mounted Spout)jaquar or Equivalent Model FLR-CHR -5347 or as approved By engineer incharge,the work included cost of labour, material T&P etc for proper completion of work. 139 Existing old damage Tile and Fixing Newfalse ceiling with 12mm thick Arm strong Fire resistant gyp board false ceiling system of approved type fixed to a Withrequired hanger Including supply of all materials, labour and T & P etc required for proper completion of work. 140 Dismentling of existing Wall tilesand then Replacing of 1 Nos of automatic urinal sensor with 1 nos of Self closing Concealed Urinal pushcock Model-PRS-CHR-073 orBrand & model approved by E/I and fixingnew wall tilesin 1 urinal pot of approved brand as directed by E/I.The work include cost of all labour,material T&P required for proper completion of work. 141 Supply and fixing of Concelled cistern with wall mounting frame & instalation kitModel No CIB-31801011XW-2400WS with control plate lemon design Model No-CIS-CHR-31204190 of Jaquar make or equivalent as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work. 142 Supply and fixing of Jet Sprayjaquar or Equivalen Model No- ALD-CHR-547 or as approved By engineer incharge,the work included cost of labour, material T&P etc required for proper completion of work. 143 Supply and fixing of Two way Bib cock with wall flange Jaquar or Equivant make Model No-OPP-15041PMas approved by E/I,the work included cost of all labour, material T&P required for proper completion of work. 144 Supply and fixing ofRack bolt For WC Model No-ZPS-SNS-RB01 of Jaquar make or equivalentas approved by E/I. The work includedcost of all labour, material T&P Required for proper completion of work. 145 Supply and fixing of Wax Seal Model No-ZPS-WHT-1401 of Jaquar make or equivalent as approved by E/I. The work included cost of all labour, material T&P Required for proper completion of work. 146 Supply and fixing of Cistren Base Plate Model No- ZMP - CHR-003 or approved a of Jaquar make or equivalent as approved by E/I. The work included cost of all labour, material T&P Required for proper completion of work. 147 Supply and fixing of Cistren ball Cock Model No- ZMP - CHR-002 of Jaquar make or equivalent as approved by E/I. The work included cost of all labour, material T&P Required for proper completion of work. 148 Supply and fixing of Cistren Syphon Model No- ZMP - CHR-001 of Jaquar make or equivalent as approved by E/I. The work includes cost of all labour, material T&P Required for proper completion of work. 149 Supply and fixing of Conector Pipe Model No- ZPS-WHT-CP01 of Jaquar make or equivalent as approved by E/I. The work included cost of all labour, material T&P Requiredfor proper completion of work. 150 Supply and fixing of Brass Inlet Fixing Model No- ZPS-BRC-5007of Jaquar make or equivalent as approved by E/I. The work includes cost of all labour, material T&P Required for proper completion of work. 151 Supply and fixing of Rubber Gasket Inlet Model No- ZPS-BLK-1403 of Jaquar make or equivalent as approved by E/I. The work includes cost of all labour, material T&P Required for proper completion of work. 152 Painting two coat ofSmart care Damp Proof Xtreme White Waterproof Coating Asian or equivalent make on roof/wall surface including removal of loose particles etc,surface should be free from dust, grease or any other foreign material including repair of suface if requird. First coat shall be applied after 30% diluted with water, second coat shall be applied undiluted only after drying of first coatincludingthe supply of all material labour , T&P etc required for proper completion of work as approved by E/I. 153 Supply and fixing of Metropole Flush Valve Regular 32mm Size (Concealed Body) with Exposed Shut Off Provision & 100mm Square Plate Model No- FLV-1095NSQZPS-BLK-1403 of Jaquar make or equivalent as approved by E/I. The work included cost of all labour, material T&P etc for proper completion of work . 154 Dismanteling, Alignment& Refiixing of existing Aluminium Door including replacement of handle, lock,hinges , tower bolts, EPDM rubber beading, Glass/ACP as requied including cost of silicon sealent,screw,fastner etc (Excluding door closure )and T&P for proper completion of work as approved by E/I. 155 Dismanteling, Alignment& Refiixing of existing aluminium sliding windowincluding replacement of handle, lock,Hinges ,tower bolts, EPDM Rubber beading,Sliding Roller, Glass as requied including cost of silicon sealent,screw,fastner etc and T&P for proper completion of work as approved by E/I. 156 Supplying & fixing suitable size GI box wih 1 modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP МСВ, С curve including connections, painting etc. as required. 157 Supply and Fixing of 5 Blade Exhaust fan Ventiles aur dx 225mm of Havells or equivalent make including all material , T&P etc required for completion of work as approved by engineer in charge 158 Chemical Electrode Earthing of size 50mm dia X 3000mm ground with suitable compund. One forAdmin Building. 159 Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect. 160 Supply and Fixing of 12 to 30 watt LED post top indirect light luminaire having pressure die cast aluminium body and clear glass with driver set comfiring to IP66 and above protection. 161 Supply & fixing steel tabular pole 5 meter lomg designated410 SP-1 in 1:3:6cement concrete foundation includingexcavation back Filling etc. 162 Supply and Fixing of 3 Blade Ceiling fan 1200mm of Håvells or equivalent make including all material,T&P etc required for completion of work as approved by engineer in charge. 163 Supply and Fixing of 3 Blade wall fan of Havells platina 300/400 mm or equivalent including all material t&P etc required for proper completion of work as approvred by engineer in charge for mess 164 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required for mess 165 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required for mess 166 Supply and Fixing of 8 to 16 watt LED on surface Luminaire with driver set confiring to IP 65 protection. 167 SIC (Supply,Installation and Connection 630Amp bus bar panel with 630Amp MCCBs 168 Chemical Electrode Earthing of size 50mm dia X 3000mm ground with suitable compund. officers Hostel.
