Tender For Proposed Construction Of 2 Class Rooms At Atal Bihari Vajpayee Nagar Nigam Degree College Lucknow. - Excavation of foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches. 2 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-all work up to plinth level. 1:4:8 (1 Cement: 4 coarse sand : 8 graded stone aggregate 20 mm nominal size) 3 R.c.c.work with cement approved coarse sand and2cm.(3/4) guage approved stoneballast in the proportion1:6, (1 cement : 6 aggregate)in lintels of doors and windows excluding supply ofand windows excluding supply of and windows excluding supplyof reinforcement and its fixing and binding thesame with24 BWG binding wireand including necessary centering and shuttering etc. and alsoincluding supplyof allmaterials,labourand toolsandplantsetc,required fo proper completion ofheworks.strengthof the concrete shall not beless than M-200. 4 As in item 3 but for the lighter beams i.e.having spans upto 6 m. (Using 1:1.5:3 Mix concrete) 5 As in item 3 above but forslabs (Using 1:1.5:3 Mix concrete) 6 As in item 3 but for the Footing (Using 1:1.5:3 Mix concrete) 7 As in item 3 but for the Column(Using 1:1.5:3 Mix concrete) 8 Reinforcement for RCC work including straightening, cutting, bending, placing in position complete. -Thermo-Mechanically Treated bars. 9 Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete 10 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc 11 Providingandinjectingchemical emulsion for preconstructional antitermite treatmentand creating a chemicalbarrier under andalroundthecolumn pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the theexternal perimeter ofbinding expansion joints, surroundingofpipesandconduitsetc, complete(plinth areaof the building at ground floor only shall be measuredas per I.S.6313(PartII 1981)Alderine emulsifiableconcentrate or anyotherapprovedmaterialsuch as Heptrachlor or chordancewillbeused.The rateof application ofchemical emulsion shallbe as follows : (1)Treatment for masonary & foundation 5 liters per / 100 sqm.(2) Back fill inimmediate contact with foundation 7.5 liters/100sqm (3) Treatment of topsurfaceof plinth filling 5 liters/100 sqm(4)Treatment junction ofwallandthe floor 7.5 liters/100 sqm (5)Treatmentofsoilalongexternal perimeter of building7.5liters/100sqm. (6) Treatment of soil under apronalong external perimter 5 liters/100 sqm 12 First Class M-150 brick work in 1:6 cement and coarse sand mortar infoundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. 13 M-150 brick work in 1:6 cement and Coarse sandmortar in superstructure including supply of all material, labour and tools and plants etc required for proper completion of work for walls of 230 mmthick 14 M-150 brick work in 1:4 cement and Coarse sandmortar in superstructure including supply of all material, labour and tools and plants etc required for proper completion of work for walls of 115mm (4-1/2) thickness. 15 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 16 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood 17 Providing and fixing bright finished brass each butt each with necessary screws etc. complete 125x85x5.5mm(heavy type) 18 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :250x10 mm 19 Providing and fixing bright finished brass door latch with necessary screws etc. complete. 300x16x5 mm 20 Providing and fixing bright finished brass handles with screws etc. complete. 125 mm 21 Providing and fixing bright finished brass hangging type floor door stoper with necessary screws etc. compelte. 22 12mm thick plaster with cement mortar consisting of 1 part cement and 6 part of approvedsand mortar in 1:6 Minimum thickness not to be less than 10mm. Including supply of all materials, labour and T&P etc. required for proper completion of work. 23 12mm thick plaster with cement mortar consisting of 1 part cement and6 part of approvedsand mortar in 1:6 Minimum thickness not to be less than 10mm. Including supply of all materials, labour and T&P etc. required for proper completion of work. 24 12 mm cement plaster 1:3( 1 cement: 3 coarse sand)finished with a floating coat of near cement 25 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate 26 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shadeArea of slab over 0.50 sqm 27 Painting & Polishing Work 28 Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/ 10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm 29 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture 30 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work 31 French spirit polishing : Two or more coats on new works including a coat ofwood filler 32 Providing centering & shuttering including strutting, propping etc. & removal of form including all materials, labour and T & P etc. required for proper completion of work all complete 33 Foundations, footings, bases of columns, etc. for massconcrete 34 Columns, Pillars, Piers, Abutments, Posts and Struts 35 Lintels, beams, plinth beams, girders, bressumers and cantilevers 36 Suspended floors, roofs, landings, balconies and access platform 37 SCHEDULEOFQUANTITIESFORELECTRICALINSTALLATIONS 38 Point wiring in PVC Conduit Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 39 Power plug wiring in PVC conduit (2 x 4 sqmm.) :- Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 40 Circuit / Sub main wiring in PVC conduit :-Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 41 2 x 1.5 sq.mm. + 1 x 1.5 sq.mm. Earth wire 42 2 x 6 sq.mm. + 1 x 6 sq.mm. Earth wire 43 4 x 6 sq.mm. + 2 x 6 sq.mm. Earth wire 44 4 X 10 sq. mm + 2 X 6 sq. mm earth wire 45 4 X 16 sq. mm + 2 X 6 sq. mm earth wire 46 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required 47 20 mm. 48 25 mm. 49 32 mm. 50 S/F light plug point modular type accessories :- Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required 51 S/F power plug point modular type accessories :-Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. 52 S/F modular type electronic fan regulator :- Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 53 S/F modular type blanking plate :- Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 54 TELEPHONE, TELEVISION AND DATA NETWORK TELEPHONE WIRING IN EXISTING CONDUIT :- 55 S/F MODULAR BOXES, BASE & COVER PLATE :-Supplying and fixing following size / modules, GI box along with modular base & cover plate for modular switches inrecessetc as required 1 or 2 Module (75 mm x 75 mm) 56 S/F MODULAR TYPE SWITCH / SOCKET :- Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc as required Telephone Socket outlet 57 DISTRIBUTIONBOARDS,MCBs, MCCBsANDSFUs 58 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)4 way (4 + 12), Double door, horizontal type 59 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as requiredsingle pole 60 Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required 61 40 amps. 62 63 amps. 63 Supplying & fixing single pole, blanking plate in the existing MCBDBcomplete etc. as required. 64 Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A C curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 65 ERECTIONOFLIGHTINGFIXTURESANDFANS 66 Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect. CAT- AAA 67 Supply and fixing of 12 Watt to 15 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing with extended heat sink, diffuser of Polycarbonate meterial and driver set complete in all respect. CAT- AAA 68 PART (B) -- NON SCHEDULED ITEMS (AS PER MARKET RATES) 69 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos.blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperaturerise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.1200 mm sweep
