Tender For Welcome Maintenance Of Md Accn At Af Stn Chakeri Kanpur; 1 M&Lfor Preparation of old decorated surfaces of walls, pillars & cornices including brooming down and cleaning the surfaces & applying onecoat of whitewash on wallcomplete all as specified and directed. 2 All as per item No 1 here-in-before buton ceiling surfaces. 3 M&L for complete removal of existing treatment and preparing OLDplastered or unplasteredsurface of wall at any position complete all as specified and as directed. 4 M&L forpreparing OLDplastered or unplasteredsurface of wall pillasters, cornices etc bybroomingdownor steel wire brushing, scrapping down smoke,roots,moulds ,moss andefflorehance,saltand trading oil and greasy spot, nails, holes cracksand making good and applying ONEcoat of cement base paint complete all as specified and directed by the Engr -in-Charge. Note : Bidder shall be considered height of bldgsupto second floor while quotingrates by them andwherever scaffoldingif required. 5 M&L Providing and applying wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed by Engr -in-Charge. 6 M&L for preparing OLDplastered or unplasteredsurface of wall and applying ONEcoatofacrylicdistemper oil emulsion complete all as specified and directed by the Engr -in-Charge 7 Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces.. Note :Bidder shall be considered height of bldgsupto 6 the storey while quotingrates by them andwherever scaffolding is necessary. 8 M&L preparationof OLD painted wooden /wood based surface of any descriptionexceeding10 cm width or girth bywashingdownwith solutionof alkaline soapto remove all loose dirtand oily& greasespotsand applying ONE coatof syntheticenamelpaintcomplete all as specified and directed.Note :Bidder shall be considered height of bldgs upto 4 storey while quoting rates by them wherever scaffolding work is required. 9 All as per item No.08 above but on steel surfaces 10 Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water etc complete all as directed. 11 M&L for rendering 15 mm thick in CM ( 1:6 ) plaster on wall/ concrete surfaces finish even and smooth without using extra cement complete all as specified and directed. 12 M&L for rendering 15 mm thick in CM ( 1:4 ) plaster on wall/ concrete surfaces , finishedeven andsmooth without using extra cement complete all as specified and directed. 13 M&L 10 mm thick plasterincement mortar (1:4) on ceiling finished even and smooth without using extra cement including chicken wire mesh whrever necessary complete all as specified and directed . 14 M&L preparing new plastered surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified and directed. 15 M & L for preparation of new plastredsurfaces of walls and applying two coat of Oil Bound Distemper over a coat of primer complete all as specified and directed. 16 M & L preparation of new surfaces and applying three coats of white wash on ceiling complete all as specified and directed. 17 M&L re-writingletters or figures (Block roman italic or Indian ) using synthetic enamel paint of colour as approvednot exceeding30 cm height inclstops, commas, short lines, dashes etc completeall as specified and directed. Note : Bidder shall be considered height of bldgsupto 6 the the storey while quotingrates by them andwherever scaffolding if required. 18 M&L cleaning of roofs by gettingout growingvegetations/ grass & broomingdown withremoving it out of MD land premises ofincludingrepairingto damaged surface of roof by usingCM (1:3) and sealedwith 85/25 hot blown grade bitumencomplete in patch not exceeding2.0 Sqm eachcomplete all as specified anddirected. Note : Bidder shall be considered height of bldgsupto 6 the the storey while quotingrates by them andwherever scaffolding if required. 19 M&L for repairing of damaged portion of mouth at tarrace / roof surface of rain water pipe by cleaning and repairingto mouth of RWP by usingCM (1:3) with mixand sealedwith 85/25 hot blown grade bitumencomplete to make joint of rain water pipe and roof surface fully leak proofcomplete all as specified and directedNote : Bidder shall be considered height of bldgsupto second floor while quotingrates by them andwherever scaffolding is necessary. 20 M& Lrepair to chajja area n exc 1 sqm each including plaster in CM(1:3) or PCC type B0 (1:2:4) (using 12.5 mm stone aggregate) on top benching/haunching, repair to broken plaster with dubbing coat complete all as specified and directed.Note : Bidder shall be considered height of bldgssecond floor quotingrates by them andwherever scaffolding if required. 21 M& Lrepair to chajja area exc 2 Sqm and n exc 4 sqm each including dismantling of upward facia,cutting of reinforcement , plaster in CM(1:3) or PCC type B 0(1:2:4) (using 12.5 mm stone aggregate) on top , benching/haunching, repair to broken plaster with dubbing coatcomplete all as specified and directed .Note : Bidder shall be considered height of bldgsupto 6 th storey while quotingrates by them andwherever scaffolding if required. 22 M& Lrepair to chajja area exc 1 Sqm and n exc 2 sqm each including dismantling of upward facia,cutting of reinforcement , plaster in CM (1:3) or PCC type B0 1:2:4 (using 12.5 mm stone aggregate) on top , benching/haunching, repair to broken plaster with dubbing coat complete all as specified and directed Note : Bidder shall be considered height of bldgsupto second floor while quotingrates by them andwherever scaffolding if required. 23 M&L for Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqmwith anti algae and UV resistance properties to be applied as intermediate finish in desired pattern to form film of 1-1.5mm thick ness after scrapping and properly cleaning the surface to remove loose particles from the plaster surfaces complete all as specified and directed 24 S & F in repair bib taps cast copper alloy CP fancy type withscrewed down for iron pipe or brass ferrule of 15 mm bore complete all as specified and directed. 25 S&F in repairs 15mm bore fancy type pillar taps, cast copper alloy, with capstan head, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes and fixed complete all as specified and directed 26 S&F in repairs 15mm bore angle/stop valves fancy brasschromium plated, screwed down, high pressure with crutch or butterfly handles screwed both ends for iron pipes complete all as specified and directed 27 S&F in repairs 15 mm bore concealed stop valves, cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedfancy type chromium plated with long shank and cup complete all as specified and directed. 28 S&F in repairs Brass chromium plated shower rose 125 mm size complete all as specified and directed 29 S&F in repairs grating doom 125mm dia with waste hole of PTMT. (Mini weight 50 gms) complete all as specified and directed 30 S&Fin repairs PVC waste pipe 32 mm dia, 800 mm long, complete all as specified 31 S&F in repairs brass chromium plated towel rail of 600 mm longwith end bracket both sides complete all as specified and directed 32 S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connection and fixed in positioncomplete all as specified and directed . 33 S&F in repair cabinet mirror of size (500x400) mm complete all as specified and directed 34 S&F in repairs toilet paper holder with flat recessed type white or coloured stainless steel complete all as specified and directed. 35 S&F in repair corner glass shelf 300mm (with brass brackets)complete all as specified and directed. 36 S&F in repair kitchen sink with drainage board made of stainlesssteel 1.0 mm thick in kitchen with plug , washer and waste including bedding layer in CM (1:6) in wall as with fixing cantilever bracket and connecting union to pipes over all size 915x460 mm bowl size 410x330x160 mmof Make Prayag or equivalent in Nirali make, complete all as specified and as directed. 37 M&L in repairs PVC flushing cistern push button / handle type of 10 ltr capacity , coloured complete with all fitting fixed to with WCincluding PVC flush pipes ,brackets complete all as specified and directed. 38 S&F in repair vitreous china wash down water closet pedestal pan white excluding flushing cistern and flush pipes complete all as specified and as directed . 39 S&F in repairs two piece wall hung snow white extended with PP Seat cover and twin flush fittings of size EWC (655x365x755)mm,P trap, comprising of cistern , Campbell soft close seat cover, twin flush fittings of Campbell model of Cera, or equivalent in Jaguar, Kohlar complete all as specified and directed. 40 S&F in repair vitreous china wash hand basin white size 550x400 mmincluding bracket but excluding taps ,waste pipes , chain and plug etc complete all as specified. 41 S&F in repair vitreous china squatting pan `Orissa pan pattern size 580x440mm white `P or `S trap front back inlet ( excluding flushing cistern and flush pipes) complete all as specified and directed. 42 S&F in repairs for plastic water closet seat cover colour/ white, closed pattern with flat bottom and MS CP or aluminised hinging device as in repair complete all as specified and directed. 43 S&F in repairs for brass CP waste coupling of size 32 mm dia WHB with long screwed shanks and fly nut complete all as specified and directed 44 All as per item No 43 here-in-before but 40mm size. 45 S&F in repair looking mirror 600 x 450mm of selected quality glass mounted on 6mm commercial ply or AC building board with aluminum frame around and fixed to wooden plugs with CP brass screws all as directed as specified and directed by Engr-in-charge. 46 S&F in repairsSoap dish, vitreous china white, approximate size 160x160x90mm all as directed as specified and directed by Engr-in-charge. 47 S&F in repairs of stainless steel curtain rod, 25 mm borewith bracket and supports and fancy type both end topcut to length as required of colour as selected & directed by Engr-in-charge.Note : (a) Weight of 3.65 meter length of eachSSpipe shouldnot be less than 1.40 Kgs.(b): Decorative fancy type02 Nos wood/fancy/SSW finished side fenals/brackets of both ends of each curtain rod be provided. 48 S&F in repairs stainless steel kitchen rack standard size (24x36x10) inch complete all as specified and directed. 49 S&F in repairs fancy type chromium plated bib cock 2-way double handle with flange complete all as specified and directed 50 S&F in repair fancy type chromium plated central hole basin mixer w/o pop up for 15mm bore pipes complete all as specified and directed 51 S&F in repair fancy type chromium platedwall mixer for cold & Hot waterfor 15mm bore pipes complete all as specified and directed 52 S&F jet spray (butterfly) with 1 mtr tube of CP complete all as specified and directed 53 Taking up or down steel tubing and connections including cleaning for refixing of 15 mm bore complete all as specified and directed 54 All as per item No 53 above but 20mm bore of pipes. 55 S & F steel water tubing medium grade, galvanised with all fittings of 15 mm bore and fixed complete to wall and ceiling or laid in floors complete all as specified and directed 56 Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) of 15 mm bore complete all as specified and directed 57 S & F steel water tubing medium grade, galvanised with all fittings of 20 mm bore and fixed complete to wall and ceiling or laid in floors complete all as specified and directed 58 Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) of 20 mm bore complete all as specified and directed 59 Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortar in 1:3 ,cutting depth not exc 10 cm girth complete all as specified and directed 60 S & F in repair Swivel shower of PTMT any colour for fixing with 15 mm pipe, (Minimum weight 40 grms), complete all as specified and as directed. 61 S & F in repair Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange of PTMT any colour, (Minimum weight 40 grms), complete all as specified and as directed. 62 S&F in repair fancy type Bib taps of PTMT any colour high pressure screwed for iron pipe and fixed (min weight15 mm-105 gms) complete all as specified and directed 63 S&F in repair fancy type Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (min weight15 mm-120 gms) complete all as specified and directed 64 S&F in repair angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (min weight15 mm-90 gms) complete all as specified and directed 65 S&F in repairs 30 mm wide continuous (piano) hinges, mild steel, bright finish or electrogalvanised, complete all as specified and directed. 66 S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed 67 Taking down chowkats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as directed. 68 Ditto all as per item No.67 here-in-before but exceeding 1.5 sqm andnot exceeding 4 sqm each. 69 Taking down shutters of any description not exceeding 1 sqm each complete all as specified and directed. 70 All as per item No.69here-in-before but exceeding 1 sqm and not exceeding 2 sqm each. 71 S&F Solid PVC door frame of size 50mmx 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube all as per specification and drawing. 72 S&F Factory made solid panel PVC door shutter 30 mm thick( stile), consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixingin the frame at site as per specification & drawing, all as specified and as directed. 73 S&F PVCButt hinge medium weight 100 mm long, complete all as specified and directed. 74 S&F Butt hinge medium weight cold rolled mild steel 100 mm long, complete all as specified and directed. 75 S&F Butt hinge medium weight cold rolled mild steel 75 mm long, complete all as specified and directed. 76 S & F 150mm long Aluminum anodised bow handle fabricated type extruded section complete all as specified and directed. 77 S & F 125 mm long Aluminum anodised bow handle fabricated type extruded section complete all as specified and directed. 78 S & F 75mm long Aluminum anodised bow handle fabricated type extruded section complete all as specified and directed. 79 S&F 150 mm size aluminum, anodised, barrel tower bolts of extruded section complete all as specified and directed 80 S&F 200 mm size aluminum, anodised, barrel tower bolts of extruded section complete all as specified and directed 81 M & L for Second class hardwood plain solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified anddirected. 82 M&L 30mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed 83 Ditto, All as per item No 82 but with sash bars, any numbers 84 S&F 32 mm thick flush shutters, solid core construction, with block board coreand ply wood face panels, commercial type on both sides complete, all as specified and directed. 85 S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples 86 S & F 300 mm long aluminum anodized sliding door bolts with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloycomplete all as specified and directed. 87 M & L for preparation of new wooden surfaces of any description exceeding 10 cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. 88 Easing of door shuttersexc 1.0 Sqm but n.exc 2.0 sqm each for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed. 89 Easing of window shuttersn.exc 1.0 Sqm eachkitchen cupboard shutters, show case shutter drawers incl fixing of screws adjusting handles, knobs tightening piano hinges incl misc small adjustments complete all as specified and directed. 90 S&F in repairs rubber beading 75mm wide fixing with nail/screw, complete all as specified and directed. 91 Hacking out old broken glass( any thickness size ,quality or description ) from wooden frame or stone etc complete all as specified and directed 92 S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 sqm in each panes complete all as specified. 93 S&F 3.00 mm thickfigured glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed 94 Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store yard complete all as specified 95 Demolition of cement concrete in ground floor and paving not exceeding 15cm thick (below or above ground level) complete all as directed by Engineer-in-Charge. 96 M&L 25mm thick cement concrete type B0, 1:2:4, (using 12.5 mm graded stone aggregate) as in sub base for floor complete all as specified and directed 97 M&L for PCC (1:2:4) type B-1 as in flooring 40 mm thick using 20 mm graded stone aggregate cement concrete finish even and smooth with using extra cement complete all as specified . 98 M&L Coloured Glazedceramic tiles(350x250)x7 mm/ (450x350)x7mm thick or as required size of 7 mm thick vertical surface as dado/skirting, set andjointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over 10mm thick cement plaster in CM 1:4 complete all as specified and directed. 99 M&L non skid ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.16 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.. 100 M&L for Vitrified Ceramic lightshade tiles 10 mm thick (square/ rectangular) polished , area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,with spacers over 15 mm screed bed in CM 1:6 set & jointed in neat cement slurry all as specified and directed. 101 M & L forVitrified Ceramic lightshade tiles 10 mm thick (square/ rectangular) polished , area of each tiles not exceeding 0.36 sqm,in dado/ skirting etc set over 10mm thick cement plaster 1:4 as backing coat , jointed in neat cement slurry & pointed with colour cement to match as specified and directed. 102 Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar. 103 M&L for 18-20 mm thick granite(of any type) work (table rubbed and polished) in steps jambs, pillars, window -cills cooking platforms and like in cement mortal (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, cutting and moulding edges over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed. 104 S&F rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top), white colour, triple layer construction, hoisted & fixed in position, includingdismantling of old tank & removing to where directed complete all as specified and as directed. 105 Demolition of brick work built in cement or cement lime mortar including all quoins, achies, pillars complete all as specified as directed. 106 M & L Brickwork with sub- class ‘B’ bricks old size bricksstraight or curved on plan exc 6 m mean radius in CM 1:6, complete all as specified and directed. 107 S&F in repairs 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms) complete all as specified and directed 108 S&F lid(cover)for PVC tank for 500/1000 ltr capacity of tank with complete arrangements of fixing with existing tanks like as nuts and bolts, hasp and staple etc, all as specified and directed. 109 M&L for 2nd class hard woodplain fillets exc 13 Sq cm & n.exc 25 Sqcm square rectangular or tringular in section clean swan, securred with nails or beadsfor fixing of cub board shutters including applying two coats of black japan paint back side of wooden surfacesall as specified and directed. 110 S&F in repairs Cast iron soil, waste and vent pipes of 75mm in any lengthwith or without ears, with cement joints , fixed to walls all as specified and directed. 111 S&F in repairs Cast iron soil, waste and vent pipes of 100mm in any lengthwith or without ears, with cement joints , fixed to walls all as specified and directed. 112 S&F in repairs PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints fixed to walls including stack clamps complete all as specified and directed . 113 S&F PVC in repairs(SWR) pipes single socketed 75 mm bore in any length with rubber ring joints fixed to wall including stack clamps complete all as specified and directed. 114 S&F in repairsCast iron Bends of 75mm ( any radius ), diminishing pieces or tapers (larger bore measuared) all as specified and directed. 115 S&F Cast iron Bends of 100mm ( any radius ), diminishing pieces or tapers (larger bore measuared) all as specified and directed. 116 S&F in repair PVC (SWR) bend 110 mm bore complete all as specified and directed . 117 S&F in repairPVC (SWR) 75mm bore bends any radius. 118 Note: - Item No-01 to Item No-117(a) The contractor shall employee two team comprising with 04 Nos of Painters separately for N-1 Area and 04 Nos for Nair,Kuldeep,Power House, Lal Sports Complex in terms of execution for item Sl No 01 to 09.(b) Welcome maint of Offr Marred Qtr will be completed within 04 days and Airmen Md Qtrs within 03 days aftter receiving the Key from JE Office. (i) Priority-I : Complaints pertains to major water leaks, air locks, flushing cistern,replacement of bib Tap,Pillar Tap,Angle Cock, PVC Connections,small fittings of GI,replacement of rusted GI Pipe line,Float Wall,Replacement of Water storage Tank in case of Heavy leakage,Plaster in Patch wk of internal/external etcwill be attended on priority-I and the same will be completed within 8 to 12 hrs. (ii) Priority-II :Complaints pertains to re-glazing of door and windows, easing of joinery,replacement of wire mesh etc will be attended on priority-II and the same to be completed within 72hrs. (iii) Priority-III : Compaints pertains to tiling,flooring and similar nature will be attended within a week. (iv) Priority-IV : Major plastering, plinth ptotections, brick work etc will be attended on priority-IV and the same to be completed within one month. (v) Contractor or his supervisor shall collect the complaint/job cardfrom JE concerned between 0900 hrs to 1000 hrs on all working days and deposited the same after completion of job duly signed by user/occupants.(vi) Summary of complaints will preparedby the contractor and put up to Engineer-in-Charge last date of every month. (vii) If contractor shall not attend the complaint as per time frame given in Para (i) to (iv), Rs 100/- per complaint will be recovered from the RAR/Final bill.
