Tender For Special Repairs To Bldg No P-Xxiv At Igoe Under Ge Chennai; 2 Demolition of cement concrete (unreinforced) of any description and in any position, sunken floornot otherwise specifically provided complete all as specified and directed 3 M&L for PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate asinpadding on roof slab of requiredthicknessfor levelling the surface of roof slab, finished fair and even complete all as specified and directed. 4 M&L for complete removal of existing roof treatment of any description in patches viz. tarfelt or membrane surface or roof tiles etc. including grubbing up of tree roots and removing all the debris to a distance n.exc 100m and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt / dust etc and applying the following roof treatment complete all as specified byManufactures instruction and as directed:-(a) Applying Ist course of 15 mm thick cement screed in CM 1:4 over concrete surface including mixing with water proofing compound @ 200ml per bag of cement .(b)Applying 2nd course of bituminious primer confirming to IS-3384 @ 0.4 litre /sqm over the screed bed.(c)Applying 3rd course of a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 180degree and applied at the ate of @ 1.2 kg/sqm.(d) Applying 4th course of APP (Atactic polypropylene) based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (weightnot less than 150 gms/sqm) laid with 75 mm side overlapand 100 mm overlap by forced / torch application as per Manufactures instructions. (e) Applying 5th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree celiciousand applied @ 1.2 kg/sqm over APP membrane,(f) Applying 6th course of a one coat of solar reflective aluminium paint @ 0.10 Litre / sqm on wall surfacescomplete all as specified and directed.Note:- WPCshallbe measured and paid separately. 5 Taking down of existing the existing water proofing treatment on walls including cement /lime mortar renderingand clenaing the surface with water andapplying 10 mm thick rendering in cement mortar 1:3 mixed with liquid ater proofing compound @ 200 ml per 50kg of cement , cleaning and preparation of newly plastered wall surfaces and applying the following water proofing treatment all as specified by Manufactuers instruction and as directed (a)Applying 1st course of bituminious (oil based) primer confirming to IS-3384 @ 0.4 litre /sqm over the screed bed.(b)Applying 2nd course of a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree celicious and applied @ 1.2 kg/sqm.(c) Applying 3rd course of APP (Atactic polypropylene) based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (weightnot less than 150 gms/sqm) laid with 75 mm side overlapand 100 mm overlap by forced / torch application as per Manufactures instructions. (d) Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree celeiciousand applied @ 1.2 kg/sqm over APP membrane, (e)Applying 5th course of a one coat of solar reflective aluminium paint @ 0.10 Litre/Sqm on wall surfaces complete all as specified and directed. Note:- WPC shallbe measured and paid separately. 6 Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed by Engineer-in-charge 7 Dismantling of PGI / CGI / Galvalume sheets of any description asin roof coverings 8 S&F 0.50mm thick corrugated (including coated thickness) pre-colourpre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa asin roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed. 9 S&Fmild steel framed brackets of angles or tees with web and flanges cut toshape, drilled and countersunk for screw, including bending andwelding angles, as necessary, gusset plates, riveting, etc.. n exc10 kg each brackets, conforming to Fe.290 Gde-E-165complete all as specified and as directed 10 S&F Mild teel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running railsand guides for sliding doors; fixed with angle cleats or other connecting plates Fe-410- W(Gde- E-250) quality-Ball as specified and as directed 11 M&L for cutting holes into or through brick / stonewalls but in cement mortar ofsuperficial area n.exc 150sqcm . and making good in cement mortar 1:3 or cement concrete 1:2:4 type Bl as required complete all as secified. 12 M&L for cutting chases, pinning in brick / stone wall not exceeding 10 cm girth for concealed water tubing or conduit wiring ,making good andpointing in cement mortar 1:3 complete all as specified and directed. 13 Supply and layingCPVC pipeSDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete with all pipe fittings including taking up or down the existing pipe line of any description completeall as specified for following sizes:- 14 20mm outer dia bore 15 25mm outer dia bore 16 32mm outer dia bore 17 S&F in repairs vitreous china wash down water closet pan, dual flush system cascade type selected colour with built in cistern floor /wall mounted type with Por S trap and matching seat cover including all fittings all as specified and directed by Engineer-in-Charge. 18 S&F in repairs vitreous chinawash basin of oval counter foul type including fitting inside granite platform, includingwaste coupling, waste pipe and brackets etc completeall as specified and directed.Note: The RCC slab and granite platform shallbe measured and paid separately under relevant item. 19 S&F in repairs 15mm diaBib taps cast fancy type, chromium platedwith crutch or butterfly handle, screwed for iron pipe or for brass ferrulefor fancy type Chromimum platedcomplete all as specified and directed.Make:Jaquar 20 S&F in repairstwo waybib tap 15 mm bore chromium plate with crtuch or butterfly handle, fancy type with long shank screwed down both ends for pipes or for union complete all as specified and directed. Make:Jaquar 21 S&F in repair 15mm dia CP bib cock nozzle with flange (washing machine tap) complete all as specified and as directed. Make:Jaquar 22 S&F in repairs 15 mm diapillar tap mixerfor both Hot and Coldlong neck with aerator fancy type cast copper alloy with crutch handle screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe or for brass ferrule etccomplete all as specified and as directed.Make:Jaquar 23 S&F in repair wall mixer 2-in-1 system with provision for over head showercomplete all as specifed and directed.Make:Jaquar 24 S&F in repairs health faucet , hand shower with 1 metreflexible tube with wall hookchromium platedcomplete all as specified and directed.Make:Jaquar 25 S&F in repair angular stop cock 15 mm dia brass chromim plated fancy type with long shank, screwed down high pressure with crutch or butter fly handle screwed down both ends for iron pipe or for unioncomplete all as specified and directed.Make:Jaquar 26 S&F in repair over head shower rose & shower arm with revolving joint of size100mmdia round shaped single flow, ABS body chromium plated complete all as specified .Make:Jaquar 27 S&F in repair toilet paper holder with flap recessed type matt chromium plate complete all as specified .Make:Jaquar 28 S&F in repair soap dish, matt finished chromium plated (MCH /Colour CP)complete all as specified Make:Jaquar 29 S&F in repair corner glass shelf 300mm, matt finished, chromium plated (MCH/Colour CP) with bracketcomplete all as specified and directed.Make:Jaquar 30 S&F in repair towel ring round with round flange chromium platedcomplete all as specified Make:Jaquar 31 S&F in repairs towel rail 600mm long with flanges, chromium plated complete all as specified Make:Jaquar 32 S&F in repair cabinet mirror of size 330 mm X 430 mm with shelfscomplete all as specified and directed.Make:Jaquar 33 S&F in repairs looking mirror of size 600mm x 450mm , bevelled edgeon selected quality mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers and framed with aluminium channel all round etc., complete all as specified 34 S&F in repair tumbler holder chromium platedcomplete all as specified Make:Jaquar 35 S&Fin repairs Sink made out of stainless steel 1mm thick with drainage board for kitchen and laboratory with plugs washers and wastes, including beading in cement mortar to dwarf wallincluding fixing cantilever brackets and connecting union to pipe overll size 915mmx460mm bowl size for 410mmx330mmx160mm including 40mm size CP waste coupling and PVC waste pipe complete all as speciifed .Make : NIRALI/JAYNA/DIAMOND/ PARRYWARE 36 S&F in repair 15 mm bore sink cock with swinging spout wall mounted model with wall flange complete all as specified and directed. Make:Jaquar 37 S&F in repairs 15mm PVC connection 450mm long of superior quality as specified. 38 S&Fin repairs PVC waste pipe for wash hand basin of size 32mm dia , 800mm lengthcomplete all as speified and directedMake : Prayag 39 S&Fin repairs PVC waste pipe for Sink waste pipe of size 38/40mm dia,1150mmlength complete all as specified and directedMake : Prayag 40 S&F in repairCP cockroach trap (127mmx127mm) with waste hole/with out waste hole of Make Prayag all as specified and directed. 41 S&F in repair Stainless steel plate rack of size 24X36X10fixed on wall with stainless screw with wooden plugs near the kitchen sink including all accessories and making good the disturbed wall tiles/concrete surface complete all asspecified and directed. 42 S&F in repair Gun metal globe or gate valve with iron wheel head screwd both ends for iron pipe and fixed for 25 mm dia bore pipes 43 S&F in repairs rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position of 1000 litrescapacity including20 mm ball PTMT Ball valve high pressure with exposy coated aluminum rod and high density plastic ball screwed for iron pipe complete all as specified and directed. 44 S&F in repairsPVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to wallcomplete all as specified 45 S&F in repairs PVC (SWR) pipes 110mm diasingle socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified 46 S&F in repairs PVC (SWR) pipes 75mm diasingle socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified 47 S&F in repairsPVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints fixed to wallcomplete all as specified 48 S&F in repairs PVC (SWR)bend with access doorof any radius of 75mm dia 49 S&F in repairs PVC (SWR)bend with access doorof any radius of 110mm dia 50 S&F in repairs PVC (SWR ) vent cowlof 110mm bore 51 S&F in repairs PVC (SWR ) vent cowlof 75mm bore 52 S&F in repairs PVC (SWR) branch piece, double Y equal or unequal 110mm bore with access door 53 S&F in repairs PVC (SWR) branch piece, double Y equal or unequal 75mm bore with access door 54 S&F in repairs PVC (SWR) junction double,double T equal or unequal 110 mm bore with access door 55 S&F in repairs PVC (SWR) junction double,double T equal or unequal75 mm bore with access door 56 Dismantling floor, hearth or wall tiling including cement mortar bedding / existing backing coat andremoving serviceable tile to store and rubbish off the premises complete all as specified . 57 M&L for Virified ceramic light coloured double charged tiles of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm of approved patternasin floors etc. set and jointed in neat cement slurry and pointed incoloured cement to match with the colour of tileover and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. 58 M&L for Virified ceramiclight coloured double charged tiles of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm of approved pattern on vertical surfaces of wall such as dado,skirtingetc. set and jointed in neat cement slurry and pointed in coloured cement to matchwiththe colour of tileover and including backing coat in cement mortar 10mm thick 1:3 on fair faces of brick or concrete surfaces complete all as specified and as directed. 59 M&L for non skid ceramic coloured joint free tile 7mmto 8 mm thick concept tile, design as approved (sqaure or rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqmin floors etcover and including 15 mm thick screed bed in cement mortar 1:4, set and jointed in neat cement slurry and pointed incoloured cement to match with colour of tile completeall as specified and as directed. 60 M&L for glazed coloured ceramic Concept designer tiles of7mm thick and area exceeding 0.11 sqm and not exceeding 0.18 Sqm as approved by GE,fixed in vertical surfaces such as in dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over and including a backing coat in Cement Mortar 1:4, 10mm thick all as specified and directed. 61 Demolition of stone slabs and tiles of any description or thickness ,laid bedded and pointed in cement morter as in floors, platforms, aprons etc.complete all as specified. 62 M&Lfor 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like bedded and jointed with grey cement slurry and pointed with white cement mixed withadmixture of pigment to match the shade of granite stone including grinding and polishing of approved quality ofany sizeset and jointed in greycementslurry laid over and including 15 mm thick screed bed in CM (1:4) includingpolishing the granite stone by using mechanical grinder and moulding edges compete all as specified and as directed. 63 M&L for rounding to edges of stone slabs, such as insteps, cooking platform, and other similar situations. 64 M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified. 65 M&L for Machine cut kota stone slab flooring 20mm to 25mm thick over and including15mm thick cement screed in cement mortar1:4 including pointing, moulding the edges in white cement (1:2) using marble dust with admixture of pigment to match with shade of kota stone complete all as specified and directed 66 M&L for Kota stone slab 20mm to 25mm thick asin riser of steps, skirting, dado and pillar laid over and includingrendering 10mm thick in cement mrtar 1:3 including pointing, moulding the edges in white cement 1:2 using marble dust with admixture of pigment to match with shade of kote stone complete all as specified and directed. 67 Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specifed and directed. 68 M&L for 75 mm thick,plain cement concrete1:3:6, type C2 (using 40mm graded crushed stone aggregate) as in plinth protection etc, finishingthe surface even and smooth without using extra cement i complete allas specified and directed.Note : concrete shall be laid at a stretch n.exc 3.0 m in length and every turning / corners. 69 Demolition of reinforced cement concreteof any description and in any position not otherwise specifically provided complete all as specified and directed 70 S&F Stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel boltsetc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. 71 M&L forreinforcedcement concrete 1:2:4type B0using 12.5mm graded stone aggregateas in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves, filling in steel frames and the like complete all as specified and directed.Note:Reinforcement shall be measured and paid separately under relevant item. 72 M&L forMild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified 73 Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. 74 Demolition of brick or stone masonry, built in cement mortarof any description including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. 75 M&Lfor brick work with fly ashold sizebricks straight or curved on plan exceeding6m mean radius, built in cement mortar 1:4 complete all as specified and directed 76 M&L for brick work with fly ash bricks stright or curved on plan to any radius, asin half brick thick wall built in cement mortar 1:4 complete all as specified and directed 77 S&F Gl wire netting 0.90mm dia & 12mm mesh in patches of lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting & waste complete all as specified 78 M&L for dubbing out average 15mm thick on irregular face of walls in patches incement mortar1:4complete all as specified and directed. 79 M&L for 15 mm thick renderingon fair faces of brick work or concrete surfaces of wallsin two layers ,first layer with10 mm thick im CM 1:6 and subsequently with5 mm thick inCM 1:4mixed withwater proofing compound as per Manufacturers instruction , finished the surfaces even and smooth without using extra cementcomplete all as specified and directed. Note : WPC shall be measured and paid separately under relevant item 80 M&L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed. 81 M&L for rendering 5 mm thick in cement mortar 1:3 as inceiling surfaces in patches finished the surfaces even and smooth without using extra cement complete all as specified and as directed. 82 Supply only Liquid water proofing compound Make : SIKA / FOSROC / CHOKSEY 83 M&L for preparation of new plasteredsurfaces of wall and applying plaster of paris putty of 1 mm thickness over a coat of primer over newly plastered surface ,finished even and smooth and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete all as per Manufacturers specification and as directed. 84 M&L for complete removal of existing treatment ofold surfaces of wall and applying plaster of paris putty of 1 mm thickness over coat of primer over the preparedsurface ,finished even and smooth and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete all as per Manufacturers specification and as directed. 85 M&L for preparation of new plastered surfaces of ceiling and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of primer complete all as per Manufacturers specificationand directed. 86 M&L for complete removal of existing treatment of any description from surfaces of ceiling and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of primer complete all as per Manufacturers specificationand directed. 87 M&Lfor applying two or more coats of 100% premium acrylic mulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete including preparation of newly plastered surfaces of walls complete all as specified and as directed .Make: APEX ofAsian or other equivalent make of shalimar / Nerolac/ Berger. 88 M&L for complete removal of existing treatment of any description andapplying two or more coats of 100% premium acrylic mulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surfaces complete all as specified and as directed Make: APEX ofAsian or other equivalent make of shalimar / Nerolac/ Berger. 89 Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each including separating guard bars/grills/wire mesh etc. complete all as specified 90 Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.1.5 sqm but not exc 4sqm each including separating guard bars/grills/wire mesh etc complkete all as specified 91 Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.4.0 sqm but not exc 7.5sqm each including separating guard bars/grills/wire mesh etc complete all as specified 92 Taking down shutters of any description exc. 1sqm but not exceeding 2sqmeach including builders hardware complete all as specified . 93 S&F second class hard wood,plain solid straight chowkats and frames rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fitted complete all as specified and as directed. 94 S&Fpressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. 95 S&F pressed steel frames of size 125mm x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. 96 M&L for plain cement concrete1:2:4 type B0 using12.5 mm graded crushed stone aggregates asinlintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs ,water troughs and the like including weathering, slightly rounded or chamfered angles and throatingcomplete all as specified and directed. 97 S&F35mm thick second class hard woodglazed and skeleton door shutters open rebated and prepared to receive glass, gauze, etc. withsash bars edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats completeall as specified and as directed. 98 S&F plainframed, panelled shutter 35mm thick (two panel) with lock rail & panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces ,second class hard wood rail & style of size all as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated completeall as specified and as directed. 99 S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge metredcut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall in repairs by drilling 100mm long MS screws using PVC fastener all as per specification and directed. 100 S&F Factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick with 2,4,6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing and all as directed. 101 S&F Butt hinges, 100mmsize extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 102 S&F Butt hinges, 100mmsize medium weightcold rolled mild steel 103 S&F Aluminium anodisedbarrel tower bolts of extrudedsection 150mm long 104 S&F Aluminium anodised barrel tower bolts, extruded section of size 200mm long 105 S&F Aluminiumhandlescast typeanodised 125 mm size 106 S&F Aluminiumhandlescast typeanodised 150 mm size 107 S&F Aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections as specified and as directed. 108 S&F mild steel 300 mm , ordinary rat rail rod pattern springs including rollar and rollar plate complete. 109 S&F 140 mm over all length of cover plate, floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed infloor. 110 S&FAluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames all as specified 111 M&L forpreparation of new wooden surfaces of any description exc. 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primercomplete all as specified 112 M&L forpreparation of new steel surfaces of any description exc. 10 cm in width or girth andapplying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified. 113 S&F aluminium powder coated (Minimum thickness of powder coating 50 micron) frame for doors / windows / ventilator / partition includingglassing clips with one or more tracks andjoining cleats for fixing and other accessoreies as requiredcomplete all as specified and directed by Engineer-in-Chage . 114 S&F aluminium powder coated sliding window (for width 1.00 above and openable for below 1.50 M width)using alumimium section weighing not less than 0.495 Kg per RM for frame and 0.48 Kg per RM for sliding shutters includingaluminium anodised snap beads, screws andfixed alongwith same sectionin three rolling sliding shutters two for fully glazed with 5mm thick tinted glass fixed with glazing clips, and one for wiremesh shutters etcincludingfixings of all builders hard ware such as wirmesh ,hinges, bow handles, locking arrangements etc complete all as specified and directed by Engineer-in-Charge. 115 S&F aluminium powder coatedventilators using alumimium section weighing not less than 0.48 Kg per RM for frame louversaluminium anodised snap beads, screws andfixed alongwith with 5mm thick frostes/pin headed glass fixed with glazing clips, and one for wiremesh shutter fixed on frame includingfixings of all builders hard ware such as wirmesh ,hinges, bow handles, locking arrangements etc complete all as specified and directed by Engineer-in-Charge. 116 S&Fmild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed. 117 S&F Sheet glass 5.5mm thick, plain ordinary quality & glazing with oil putty in square exc 0.5 sq.m in each pane fixing to aluminium frame work including hacking out old broken glass (any thickness, size, quality or description ) from Aluminium section fixed with beads/glazing clipscomplete all as specified 118 S&F in repairs 12mm thickplywood, grade BWR,fixed with screws to timber frame worktype BB with decoraive laminate type1 0.90mm thick of surface finish colour and pattern as approved and other side white lamination type 1 0.5mm thick fixed with approved adhesieve as per manufacturers instructions complete all as specified 119 S&F in repairs 18 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work complete all as specified and directed. 120 S&F6mm thick external teak wood lipping over 18/19mm thickparticle board/plywood fixed with nails 121 S&F continous (piano)hinges mild steel,bright finish or electro galvanised width of flaps (when open) 30mm complete all as specified . 122 S&Fin repairsLocks, drawer, cupboard shutters grade I, size 75 mm,Brass4 levers complete all as specified 123 S&F in repairs stainless steelcabinethinges /self closing honges (Bombay Hinges) complete all as specified 124 S&F in repairs Magnet closures to cabinet cupboards complete all as specified 125 S&F in repairs stainless steel curtain rodswith L clamps and with suitable globe brackets and brass screws completeall as specified 126 M&L for small articles such as hold fasts etc. of Flat Iron 25 x 3, Grade confirming to Fe-290 Gde E-165 complete all as specified 127 M&L for preparing small articles such as hold fasts, end of posts etc. of area n.exc 0.1Sqm and treated with Cresote Oil/ black bituminous paintcomplete all as specified 128 M&L preparing of wood and wood based materials, steel, and iron work, new or old and treating ends of posts, backs of chowkats, etc, area tarred exc 0.1 sq m but n exc 0.5 sq m each and treated with tar or coat tar black paint 129 M&L for plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregatefor fixing of hold fast complete all as specified and directed. 130 M&L for plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate, as in floor,25mm average thickness , mixed with WPCat the rate of 200ml per bag of cement complete all as specified and directed.Note: Liquid Water proofing compound shall be measured and paid separately. 131 M&L for Plain Cement concrete 1:5:10 type E2 using 40mm graded stone aggregate in mass concrete in sunken floor, bed blcoks,and similar work complete all as specified and directed. 132 M&L for cleaning the surface (for sunken floor portion) with wire brush and washing with hydrocholoric acid to remove dust, dirt, oil grease, loose particle etc and applying a coat of water base acrylic polymer modified MIX GUARD AC or other equivalentmake appoved by GE@ 1kg per sqm as in part A (Powder) and Part B (liquid) in a ratio of 3:1 with and including 20mm thick rendering in CM 1:4 as in sunken floor slab, walls mixed with intergal water proofing compound and finished even and smooth complete all as per Manufactures instruction and all as directed by Engineer-in-Charge. 133 INTERNAL ELECTRIFICATION 134 Taking down carefully copper/aluminium point wiringlight, fan, socket or powercomplete with fittings such as switches, ceiling roses,regulators sockets etcand making good disturbed surfaces of walls, floors to match with the existing surfacecomplete all as specified 135 M&L for point wiring of size 1.5 sqmmwith PVC insulated unsheathed multistranded copper conductor cabel of 1100V grade drawn throughnon metallic rigid PVC conduit including accessories,concealed in wall/floor and fixed on ceiling/roof etc, including pressed steel terminal boxes concealed in walls for housing modular switchs,sockets, fan regulators etc., incl provn of 1.5 sqmm PVC insulated copper earth conductor cable for earth continuity and connecting to common earth dolly complete for complete for :- 136 one light point controlled by one switch 137 one fan point controlled by one switch 138 one 3 pin socket outlet 5 amps on the same board controlled by one switch. 139 one 3 pin socket outlet 5 amps on independent board controlled by one switch. 140 one bell/buzzer point controlled by one bell push 141 One light point controlled by two 2-way switch 142 All as peritem No. 131 above butfor One 3 pin socket outlet15 Amps, independent, with 4.0 sqmm cablecomplete all as specified ( for Geyser & Ac) 143 Allas per itemNo 131but for one socket outlet three pin 15amps controlledby one switch, independent board with 2.5 sqmm sizecable complet all as specified 144 S&Fmodular cover plate with frame 1 module complete all as specified 145 S&Fmodular cover plate with frame 3 module complete all as specified 146 S&Fmodular cover plate with frame 4 module complete all as specified 147 S&F modular cover plate with frame 8 module complete all as specified 148 S&F modular switches suitable fortype AC 240V, 6 Amps 1 modulecomplete all as specified 149 S&F modular switches suitable fortype AC 240V, 6 Amps 1 module 2 way complete all as specified 150 S&F modular socketssuitable fortype AC 240V, 6 Amps 2 modulecomplete all as specified 151 S&F modular switches suitable fortype AC 240V, 16 Amps 1 modulecomplete all as specified 152 S&F modular power sockets suitable fortype AC 240V, 16 Amps 2 module complete all as specified 153 S&F modular bell switchsuitable fortype AC 240V, 6 Amps complete all as specified 154 S&F call bell of multi music type A/C 230 voltscomplete all as specified 155 S&F ceiling rose , polycarbonate, isolated bodywith 2 to 3 terminals 156 Taking down ceiling fan and removing blades from fan body and depositing to store yard ofAGE E/M includingconnecting rod, cotter pins and all accessories complete all as specified 157 S&F ceiling fans complete with blades, down rods, electronicregulator (2 Modular)and accessories, 230 V, 1200mm sweep five star rated with brushless direct current (BLDC)motor, complete all as specified and directed. 158 Taking down Exhaust fans and depositing to store yard ofAGE E/Mincludingall accessories complete all as directed 159 S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers ,complete all as specified 160 S&F20 Watts LED COOL LIGHT fitting, surface mounting general purpose LED Battens in Extruded Aluminum housing with wide range of wattages to suite variety of application areas, complete all as specified and directedMake : Havells Cat No. LUMILINEPLUSNEOBS20WLED865SPCSSIND or other equivalent make ofPhilips/Bajaj. 161 S&F 10 Watts LED COOL LIGHT fitting, surface mounting general purpose LED Battens in Extruded Aluminum housing with wide range of wattages to suite variety of application areas, complete all as specified and directedMake : Havells Cat No. LUMILINEPLUSBS10WLED865SPCSSIND or other equivalent make ofPhilips/Bajaj. 162 S&F 15 Watts round ceiling COOL LIGHT is a functional range of aesthetically designed surface mounted downlights with aluminum housing and heat sink for better thermal performances, complete all as specified and as directedMake : Havells Cat No. INTEGRANXTRDDLRSURD15WLED865S or other equivalentmake ofPhilips/Bajaj. 163 S&F 10 Watts Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head Back-lit LED luminaire comprising of high brightness LEDs, Complete all as specified and as directedMake : Havells Cat No. HEXAFT10WLED857SSYMBOPC or other equivalent make ofPhilips/Bajaj. 164 Taking down the existing geyser, refixing the same after all necessary plumbing and electric works done and make necessary repairs if any, complete all as specified and as directed 165 Taking down AC boxany type and any size complete after taking proper disconneting of electric supply properly andmaking good surfacecomplete all as specifided and directed 166 S&F MCB Power unit with 4 module steel box consisting of 3 pin 24 Amps socket with Plug top and MCB SP 25 Amps, suitable for operation of AC & Geysers etc. complete all as specified. Make :- Havells/Legrand/Anchor 167 Taking down sub main wiringany type and any size complete after taking proper disconneting of electric supply properly andmaking good surfacecomplete all as specifided and directed 168 S&F sub main wiringcomplete with two runs of 10 sqmmPVC insulatedunsheathed single core multistrand copper conductorcable (FRLSH) of 1100 volts grade drawnthrough intonon metalic rigid PVC conduit pipe concealed in wall alongwith accessories fixed on walls/floors/ceilingwith one run of 10 sqmm PVC insulatedunsheathed copperconductorcable as earth continuity conductor all as specified and directedNote:- Two runs of PVCinsulatedcable 10 sqmmand one run 10 sqmmof earth wire and one run of conduit including accessories shall be measured as one unitlength. 169 Taking down MCBDB any type and any size complete after taking proper disconneting of electric supply properly andmaking good surfacecomplete all as specifided and directed 170 S&F MCB distribution board made of 1.2mm thick special grade CRCA sheet, powder coated with high quiality weather proofing paint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 430 Volt 12 way MCB DB , SPN with 200 Amp rated bus bar shall conform to IP 38 protection incluidng taking down the old one complete all as specified and directed by Engineer-in-charge 171 S&F MCB distribution board made ofCRCA sheet, powder coatedpaint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 415 volt 8 way MCB DB, SPN with 200 Amp rated bus bar shall conform to IP 38 protection complete all as specified. 172 Taking down MCBs any type and any size complete after taking proper disconnecting electric supply properly and making good surface complete all as specified and directed. 173 S&F MCB of rating 240 Volts, SPN 63 Amps 174 S&F MCB of Single pole of rating 6 to 32 Amps 240 Volts 175 M&L for earthing complete with galvanisedsteel earth plate electrode 60cm x 60 cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25m deep below ground level with top edge of plate not less than 1.5 below ground level connected to GI 4mm earth wire by means of bolts, nuts check nuts washers made of galvanised iron or steel earth wire protected by GI pipe 15 mm bore light grade connected upto switch board incl 20mm bore GI water pipe with funnel and wire mesh all as shown in electrical plate No.3 of SSR Part I including dearth chamber of PCC 1:2:4 type B1 using 20mm grade aggregate with RCC cover slab 1:2:4 type B1, 40mm thick with 15mm dia MS bar 100mm C/C both ways and 6 MM dia MS hooks complete all as specified inlcuding testing on completion. 176 S&F LED security light fitting 35 Wattsmade out of pressure die cast aluminium powder coated housing high impact resistant 4 mm thick toughened glass cover and matrix of power LEDs in built electronic driver up to 4 KV surge protection fitted with adjustable pole adopter to enable on site tilt angle setting and input power 25 W system lumens 85/W operating voltage 160-260 V includingbrackets made out of 25 mm / 20 mm dia GI medium grade tubing of suitable length and bend to shape including fixing MS flat iron clamps, bolts & nuts as per site requirement complete all as specified and as directed. 177 EXTERNAL WATER SUPPLY 178 M&L for cutting existing GI water tubing in position for insertion of Tee of 80 x 80 x 40 mm sizeto connectGIpipe80 mm dia including necessary earth work excavation complete all as specified and directed 179 Supply and lay galvanised steel water tubing 40mm bore medium grade with all fittings such as bends, tees, unions, elbows, connecting pieces, plugs, sockets etc., laid in trenches complete all as specified 180 Supply and lay galvanised steel water tubing 25mm bore medium grade with all fittings such as bends, tees, unions, elbows, connecting pieces, plugs, sockets etc.,fixed complete to walls and ceilings or laid in floors complete all as specified . 181 S&F25mm bore Gun metal globe / Gate valve conforming to IS 778-1984 with iron wheel head, screwed both ends for GI pipe including all fittings/ fixutres like nipple, union etc, complete all as specified and directed. 182 Takingup or down steel tubing and connections of40mm dia from any position completeall as specified 183 Takingup or down steel tubing and connections of25mm dia from any position completeall as specified
