|
| 1 | Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete as specified and directed. |
| 2 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 3 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed. |
| 4 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed. |
| 5 | Demolition of Brickwork or stone/ boulder masonry, built in CMincluding all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 6 | M & L for walling of random rubble, uncoursed well bounded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed. |
| 7 | M & L for walling (Except stone) of random rubble, uncoursed well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed. |
| 8 | Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc 20mm for sand stone and dressing to face stones and dressing of face beds and joints as specified ,of random rubble walling ,uncoursed or brought upto courses completed as specified and directed . |
| 9 | Dismantling floor ,hearth or wall tiling incl cement mortar bedding (but not backing) complete all as specified and as directed . |
| 10 | Dismantling timber scantling 40 sqcm and over in section ,an any position (framed) complete as specified and directed. |
| 11 | Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing complete all as specified and directed. |
| 12 | Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing complete all as specified and directed. |
| 13 | Providing cement concrete 25 mm thick typeB-1 (1:2:4) using 20 mm graded agg as in sub base to flooring complete as specified and directed. |
| 14 | M & L,non skid coloured ceramictiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 Sqm, in floors over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to matchcomplete all as specified and directed |
| 15 | M&L, Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete as specified and directed. |
| 16 | M & L,glazedcoloured ceramic tiles in vertical surface as in skirting & dado, 7 to 8 mm thick area exc 0.05 Sqm but n.exc 0.18 Sqm over and including 10 mm thick rendering in CM1:4set & jointed in neat cement slurry & pointed in coloured cement to matchcomplete all as specified and directed. |
| 17 | M&L for 10 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:4complete all as specified and directed. |
| 18 | M&L for 10 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:6 and finishing even and smooth without using extra cement complete all as specified and directed. |
| 19 | M&L for 10 mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection etc complete all as specified and directed. |
| 20 | Preparation of new plasteredsurfacesand applying two coat of oil bound distemper over and including a layer of wall care putty to achive a smooth finish surface (average thickness 1 mm) complete all as specified and directed. |
| 21 | Preparation of old plasteredsurfaces by complete removal of existing treatment and applying two coat of oil bound distemper over and including a layer of wall care putty (average thickness 1 mm) complete all as specified and directed. |
| 22 | M&L for preparationof new plastered surfaces of wall and applyingtwo coats of cement base paint complete all as specified and directed. |
| 23 | S&F 1.25 mm thick Pressed steel frame size 125 x 60 for doors with one or more rebates including necessary S&F suitable MS hinges ,lugs,lock strike plate, hold fastcomplete all as specified and directed. |
| 24 | M&L for PCC 1:2:4 type B-0 using (12.5 mm graded agggregate stone ) for back filling of Pressed steel frame etc complete all as specified and directed. |
| 25 | M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast ,filling etc complete all as specified and directed. |
| 26 | S&F 35 mm thick Flush shutter ,solid core construction ,with blockboard core and plywood face panelcomercial type on boath sides complete all as specified and as directed . |
| 27 | S&F Aluminiumeyes pice glass for main Gate and shutter complete as specified and directed. |
| 28 | S&F in repair Stainless steel Door hinges medium weight, cold rolled 100 mm size allas specified and directed. |
| 29 | S&F Aluminium anodised barrel tower bolt of extruded section length of bolt in200 mm size complete all as specified and directed. |
| 30 | S&F,aluminium handles 150mm size, cast type, anodised complete all as specified and directed. |
| 31 | S&F 300 mm long Aluminium alloy ,anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet ,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed . |
| 32 | S&F 150mm long floor door stopper of aluminum alloy body and tongue , anodized with hard drawn steel spring complete all as specified and directed. |
| 33 | M&L, preparing of new wooden surfaceexceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 34 | S&F standard aluminium section powder coated any colour as approved for door frames / shutters, window, ventilator frames/three track shutters sliding/fixed /louvered and partitions etc including jointing cleat and rubber beading/linning, Pivot ,locking aragement and fixed in position with stainless steel screws all as specified and as directed. |
| 35 | Supply and Fixing sheet glass 4.8 mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane complete all as specified and directed. |
| 36 | Supply and Fixing Figured glass pin head type (Figured glass) sheet glass 4mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane complete all as specified and directed. |
| 37 | M&L, preparing of new steel surfaceexceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 38 | S&F, factory made solid panel PVC doorshutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fit-ted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 39 | S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in opening as per specificationcomplete all as specified and directed. |
| 40 | S&F in aluminium, anodised barrel tower bolts 150mm long of extruded section and fixed complete all as specified and directed. |
| 41 | S&F,aluminium handles 150mm size, cast type, anodised complete all as specified and directed. |
| 42 | Dismantling Asbestos cement (Corrugated semicorrugated ,etc) sheets in roof coverings complete as specified and directed. |
| 43 | S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in single length complete all as specified and directed. |
| 44 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 45 | Dismentling ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover filletscomplete all as specified and directed. |
| 46 | S & F for 6 mm thick of size 605x605 mmHSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer boardE-Board Classic to be fixed anodised aluminium snap grid/section size 605mmx605mm with main runner ,cross tee and wall angle duly suspended with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any sizecomplete all as specified. Make : Armstrong or equivalent as approved by GE. |
| 47 | S&F rolled mild steel section as in main and cross beams hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-410, Gde E-250A all as specified and directed. |
| 48 | S&F MS angle iron framed work as in doors or gate of angle or other section conforming to Fe 290 (Gde E-165) with gusset plates rails braces etc complete including hangin galso fastenin gand fxing complete as specified and directed . |
| 49 | S&F in repairs bib taps cast copper alloychromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete as specified and directed. |
| 50 | S&F in repairs Stop valves /Angle cock/ concealed stop valves cast copper alloychromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete as specified and directed. |
| 51 | S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete as specified and directed. |
| 52 | S&F in repair vitreous china squatting pan, orrisa pattern, size 580mm x 440mm white, with integral foot rests (excluding flushing cistern & flush pipe) including making good to disturbed floor with PCC complete all as specified and directed. |
| 53 | S&F in repairs PVC low level 10 lit capacity valveless syphonic action type flushing cistern including 32mm dia PVC flush pipe fixed in repairs complete all as specified and directed |
| 54 | S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete. |
| 55 | Dismantling of water tank & n exc 500 ltr capacity in litres and removing to store complete as specified and directed. |
| 56 | Supply & Fix 500 litre capacity three layered rotational moulded polythylene water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and directed. |
| 57 | Refixing old serviceable 15 mm GItubing and connection in new or old position (concealed in Wall, ceiling &floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed. |
| 58 | S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors incl cutting chases where requiredcomplete complete all as specified and directed. |
| 59 | S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors incl cutting chases where required complete complete all as specified and directed. |
| 60 | S&F in repair 20mm Gate valves with iron wheel head screwed both ends for iron pipe and fixed complete as specified and directed. |
| 61 | S&F in repair white glazed earthen ware vitreous china wash hand basin of size 550x400 mm with and including CI brackets ,32mm bore bras CP waste coupling lintel /out let PVC flexible pipe 600mm size for 15mm with brass nut and washers etc complete. |
| 62 | S&F in repairs viterous China wash down water closet EWC including to connection to drain and flush pipe (excluding flushing cistern and flushing pipe) incl trap set complete as specified and directed. |
| 63 | Viterous china Urinals, half stall large colouredincluding connection PVC waste pipe of adequate dia and size CP grating with hole and urinal push valveincluding fittings fixed in repair complete as specified and directed. |
| 64 | Supply & Fix in repair15 mm diapillar tap (long nose)cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure, with or without lettered \"Hot or Cold\" with long swan neck swivel typescrewed for iron pipe and fixed complete all as specified and directed. |
| 65 | S & FSoap dish chromium plated approximate size 160x 160x90mm complete all as specified and directed. |
| 66 | S&F 5.5mm thick glass shelf of size 600mm long fancy type fixed and including Chromium plated grils, screws and wooden /plastic cleats complete all as specified and directed |
| 67 | S&F 5.5mm thickglass cornershelf assembly fancy type size 250mmx250mmfixed with and including chromium plates brass screws and wooden /plastic cleats complete all as specified and directed |
| 68 | S & F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and directed. |
| 69 | S & FAluminium Hat pegs of 6 pegs,solid body 125mm to 175 mm complete as specified and directed. |
| 70 | S & FBrass chromium plated shower rose 125mm size incl shower arm complete all as specified and directed. |
| 71 | S & FPVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 72 | Supply & Fix in repairs, 75mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with PVC holding clampscomplete all as specified and directed. |
| 73 | S&F in repairs, 110mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floorscomplete all as specified and directed. |
| 74 | S&F in repairs,125/110mm bore PVC (SWR) \"P’ trap complete all as specified and directed. |
| 75 | S&F PVC (SWR) Floor/ Nahani trap with grating of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete as specified and directed. |
| 76 | S&F in repairs, 110mm bore PVC(SWR)bends any radius,complete all as specified and directed. |
| 77 | S &F PVC (SWR) 75 mm dia vent cowl complete as specified and directed. |
| 78 | S&F M.S Framed work such as grills gratings etc with ends of bars sholdered and/or riveted into spikes ,framed guard bars /railings complete as specified and directed. |
| 79 | Dismantling stone slab and tiles of any description or thickness in floors,aprons etc. complete as specified and directed. |
| 80 | M&L for chequered cement concrete tiles 20cmx20cmx25mm thick set ,jointed and with mixture or white & grey cement in equal proportion & no pigment ,pointed in neat cement slurry in floors over and including 15mm thick cement screed bed in cm 1:6 with grey cement and pigments complete all as specified and directed. |
| 81 | M&L PCC 40mm thick 1:2:4 of type B1 using 20mm graded stone aggregate as floor finishing surface even and smooth without using extra cement laid in pannels complete all as specified and directed. |
| 82 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking latforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete as specified and directed. |
| 83 | S&F, in repairs, 25mm dia, powder coated, fancy type, aluminium decorative tubular curtain rod with decorative ball type side brackets, complete all as specified and directed. |
| 84 | S&F in repair for CP health faucet (hand shower) with 1.5 m long , SSflexible tube and wall hook complete as specified and directed. |
| 85 | M&L for taking down , chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC Columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applyingrust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing polymer modified cement and quartz sand mortor in CM 1:3 mix , 40mm thk in two coats, using polymer SBR Latex or equivalent as approved @ 5 Ltrs per 50 Kg bag of cement complete all as per manufacturer\"s Specifications/instructionsand as directed.Note :- (New reinforcement or Welded wire fabric) willbe measured and paid separately) Make : Dr. Fixit/Sunanda/chemestik/Fosrok |
| 86 | M&L for TMT bar 6 to 8 mm dia including cutting bending and binding with MS wire anealed dia not less than 0.9 mm conplete all as specified and as directed. |
| 87 | Taking/removing existing tar felt treatment of any description from RCC roof slab, terrace etc by means of MS Scrapper patty or any other suitable tools and removing to a distance 500 mtr from the starting point and depositing as diected. |
| 88 | M&L for25 mm thick Cement Concrete Type B0 1:2:4 (using 12.5 mm gradedaggregate) roof padding finishing cement concrete even and smooth with out using extra cement complete as specified and directed. |
| 89 | 10 MM thick plaster in CM 1:4, rendering is to be finished even and smooth (without using extra cement) |
| 90 | Supply only Bituminous primer (0.40 Ltr /Sqm) complete as specified and directed. |
| 91 | APP based polymeric membrane minimum weighing 3.kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete as specified and directed. |
| 92 | Taking down carefully copper/aluminium point wiring (Light, fan, socket or power etc.) complete including fitting such as switches, socket, bell pushes, ceiling roses, pendants/batten holder, call bell, regulators etcall as specified and directed by Engr-in-charge. |
| 93 | M&L for point wiring for one light/fan/bell point controlled by one switch one way in & including PVC conduit concealed in brick or stone wall using FRLS PVC sheathed multistrand copper conductor wire 1.5 sqmm single core for one light/fan point controlled by one switch including modular white cover plate with frame of suitable modules over modular metal flush box concealed type for earth continuity insulated PVC sheathed (green colour) 1.5 sqmm copper earth wire connected to common earth dolly using complete all as specified and directed by Engr-in-charge.Note : (a) wiring shall be done by using proper colour coding. |
| 94 | All as per srl item No. 93 here-in-before but for 5 Ampsocket outlet on independent board complete as specified and directed. |
| 95 | All as per srl item No. 93 here-in-before but for 5 Ampsocket outlet on same board complete all as specified. |
| 96 | All as per srl item No. 93 here-in-before but for 6/16 Ampindependent socket outlet using 2.5 sqmm single core wire (for phase, nuetral and earth) complete all as specified. |
| 97 | M&L modular switch piano, flush type 6 Ampsone way 230 volts complete all as specified. |
| 98 | M&L modular bell push 6 Amps,1module complete all as specified and directed. |
| 99 | M&L,in repairs, bell, A.C. 230 Volts, single pole,complete all as specified and directed. |
| 100 | M&L modular socket outlet3 pin 6 & 16 Ampsflush type 230 volts complete all as specified. |
| 101 | M&L modular switchone way 16 Ampsflush type 230 volts complete all as specified. |
| 102 | M&L modular socket3 pin 6 Ampsflush type 230 volts complete all as specified. |
| 103 | M&L ceiling rose 3 terminal size 50x65mm surface type 230 volts complete all as specified. |
| 104 | M&L, modular fan step type regulator, suitable for 1200mm/1400mm sweep ceiling fan, 2 module complete all as specified and directed. |
| 105 | Labour only for Cutting openings, through brick walls for fixing of exhaust fan, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core etc. and rubbish not exc. 50m. Forming jambs, etc. to openings for 300mm exhaust fan including cutting in wall fo cement mortar 1:6, toothing, and properly bonding into old work, also facing, jointing and pointing to match existing work, complete |
| 106 | Supply and fix of exhaust fan, 225 mm sweep, 1400 rpm, MS body heavy duty, AC single phase, 230 volts with, blades, and frame and louvers including connection with 0.5 sqmm multistranded copper conductor flexible wire from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer, grouting and making good to disturbed surface complete all as specified and as directed. |
| 107 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated, 230Volts, single phase, 50 Hz AC, energy saving high density PUF insulation complete with all accessories such as safety valve, thermostate, NRV, inlet and outlet (cold & hot) PVC pipes upto 450mm long, with 15A plug top etc. complete all as specified and directed. |
| 108 | M&L LED compact fitting/batten for single LED tube of 1x20W, 220V, AC decorative box type4ft with integral LED driver including 20W, T8 tube rod complete all as directed by Engr-In-charge. |
| 109 | M&L, in replacement, LED light fitting, batten type, housed in extruded from powder coated aluminium, 10 watt for soft diffuser lighting with and including lamp and connecting to ceiling rose with 3 core flexible round white cable complete all as specified and directed. |
| 110 | M&L LED flat panel of size 2\" x 2\", 36 Watts, environmental friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling complete all as specified and directed by Engr-in-charge. |
| 111 | M&L DB with metal plug and socket single pole and nuetral with MCB SP of 20 Amps, 240 V, 10 KA all as specified and as directed by Engineer-in-charge. |
| 112 | Taking down carefully old unsv submain wiring of any type/any size with PVC conduit or casing caping complete all as specified and directed. |
| 113 | M&L for sub main wiring complete with FRLS PVC insulated unsheathed stranded copper conductor wire 4.0 Sq mm 02 runs (for Phase & Neutal)alongwith earth wire FRLS PVC insulated unsheathed stranded copper conductor wire of size 4.0 sq mm wire drawn through in & including PVC casing caping or conduit as per site requirement complete all as directed by Engr-In-charge. |
| 114 | Taking down carefully old unserviceable main switches/ Distribution board any type including fuses MCB etc after removing all connection, wires and making good the disturb surface complete allas directed by Engineer-in-charge. |
| 115 | M&L Sheet metal enclosure double door for DB\"s SPN 8 way 240 V having200 A rated bus bar complete all as specified and directed by Engr-in-charge. |
| 116 | M&L MCB SPN 32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge. |
| 117 | M&L MCB SP 6-32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge. |
| 118 | Disconnecting carefully and taking down the existing ceiling fan of any size, and depositing to MES E/M store for safe custody complete all as directed by Engr-in-Charge |
| 119 | M&L ceiling fans 1200mm sweep energy efficient five star rated 230 volts with blades, down rods, electronic regulator control type and accessories with brushless direct current motor (BLDC) and connecting up with 3 runs of suitable size single core PVC cable from ceiling rose to fan complete all as specified and as directed. |
| 120 | M&L 30W New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 for bldg security light with GI pipe bracket of suitable size for fitting complete all as specified and directed by Engineer-in-charge. |
| 121 | Supply of steel body evaporative Duct Type desert cooler with fan motor (ISI marked to IS 996 latest), fan blade of 430mm sweep of aluminum material, 1400 RMP for 2000 cum/hr nominal air capacity,3 Speed Control, wood wool filter pads of thickness size is 15mm or above with non-corrosive wire guard for filter pads, float valve at the inlet, submersible pump , the material of filter panel, grill, top of the cooler body is made of galvanized steel sheet of thickness not less than 0.8mm and sump/water tank of 80 liters capacity including sheet thickness not less than 1.00mm with zinc coating not less than 100 gms/sq.meter and all internal surface of steel body painted with water-resistant paint to IS 9862 latest and brass/ss material drain 3 pin molded plug top of 5/6 amps plug ISI marked, 230 Volts,50Hz, connecting cable with, commissioning complete all as specified and directed. |
| 122 | M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth Lead 4 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I connected to earth test point using earth strip of 25x4mm as earth lead all as specified and testing on completion includingprovisionof earth lead protected by 20 mm dia light grade GI pipe & watering pipe shall be 15 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete. Note : Rate quoted by tenderers shall be deemed to include for following provisions:-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 M.[ii]. PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 15 mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 20 mm bore light grade 7.5m. |
| 123 | Dismantling cross-arms of M.S channel or angle sections etc. complete all as specified and directed. |
| 124 | Dismantling old insulator complete all as specified and directed. |
| 125 | Dismantling of old un-serviceable ACSR conductor of any size and make from LT over head line complete all as specified and directed. |
| 126 | Dismantling stay assembly complete.(demolition of concrete, etc. and excavationmeasured separately) complete all as specified and directed. |
| 127 | Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depthfor foundation of pole,laying of cables etc in Hard and dense soiland getting out complete all as specified and directed. |
| 128 | Returning fillingin including spreading, leveling, watering and well ramming in layer not exc 25 cm complete all as specified and directed. |
| 129 | Removing excavated material not exc 50 mtr and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed. |
| 130 | M&L for providing dry river sand as in sand cushioning to UG cable including punning gently all as directed. Note : Depth after punning shall be measured and paid. |
| 131 | M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for padestal/coping around poles, including necessary form work, finishing even and smooth without using extra cement, all as specified and directed. |
| 132 | Supply and laying sub classold \"B\" burnt bricks laid as cable protection covercomplete all as specified and directed. |
| 133 | Supply and fix LT junction box for street light, FRP type with hinged type door and locking arrangement, off white colour, of size 300 x 200 x 105mm(internal)comprising of suitable size Aluminium busbar 3 rows with terminals,1 No bakelite base neutral link and 01 No earthing terminal bolt and nut, MCB SP 6 Amps and connecting up cables with aluminium terminal lugs all as specified and as directed. |
| 134 | Supplying & laying, XLPE insulated PVC inner sheathed, 6 Sqmm, 2 core, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed. |
| 135 | Supplying & laying, XLPE insulated PVC inner sheathed, 10 Sqmm, 2 core, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed. |
| 136 | Supplying & laying, XLPE insulated PVC inner sheathed, 10 Sqmm, 4 core, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed. |
| 137 | Supplying & laying, XLPE insulated PVC inner sheathed, 16 Sqmm, 4 core, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed. |
| 138 | Supplying & laying, XLPE insulated PVC inner sheathed, 25 Sqmm, 3.5 core, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed. |
| 139 | Supplying & laying, XLPE insulated PVC inner sheathed, 50 Sqmm, 3.5 core, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed. |
| 140 | Supplying & laying, XLPE insulated PVC inner sheathed, 70 Sqmm, 3.5 core, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed. |
| 141 | S&F FRP insulated and PVC sheathed copper conductor cable of size 1.5 Sqmm, 3 core, 1100 volts grade, multistranded, passing throuth PVC pipe, fixed on pole/wall from juntion box to street light fitting complete all as specified and directed. including taking down old |
| 142 | Supply, installation, commissoning and testing, in repair, feeder pillar board,Compartmenttype, LT(415 Volts, 50 Hz , 3-phase, 4 wire supply) plinth mounted, factory made, compartment type,outdoor type,weather and vermin proof (Protection Class IP-54) made out of 50m x 50mm x 5mm angle iron frame and 3.15 mm thick MS Sheet CRCA sheet powder coated with front & back hinged opening, rubber lining, locking arrangement, painted externally and internally with two coats of synthetic enemell gray paint (First Quality) over a coat of red oxide primer, grouting panel through angle iron 0.45 mtr in ground and 0.3 mtr over the ground including excavation & earth work in any type of soil and PCC (1:3:6) type C-2 using 40mm graded stone aggregate complete comprising of the followings:- (a) Incoming supply:- (i) Aluminium bus bar chamber 300 amps rating of 04 strip - 01 No (ii) MCCB, thermal and meganitic setting, 4 pole AC 415volts, 200 Amp rating, 36 KA rupturing capacity - 01 No (iii) Digital type multimeter with selector switches - 01No (v) Indicatiing lamp Neon type for R-Y-B - 3 Nos (b)Outgoing supply:- (i) MCCB, thermal and meganitic setting, 4 pole AC 415volts, 160 Amp rating, 36 KA rupturing capacity - 02 No No. (ii) MCCB, thermal and meganitic setting, 4 pole AC 415volts, 100 Amp rating, 25 KA rupturing capacity - 03 No.(iv)Time switch, single phase, 230 volts with 24 hours time setting, current rating 16 Amps and with AC relay type ML-3 and with MCB TPN,C curve 32 Amp, three phase including internal connections - 02 Nos. |
| 143 | Supply, installation, commissioning and testing, feeder piller board,compartmenttype , LT (415 Volts, 50 Hz , 3-phase, 4 wire supply), plinth mounted, factory made, outdoor type,weather and vermin proof made out of angle iron frame and 3.15 mm thick MS Sheet CRCA sheet powder coated with front & back hinged opening, rubber lining, locking arrangement, painted externally and internally with two coats of synthetic enamel gray paint (First Quality) over a coat of red oxide primer, grouting panel through angle iron, 0.2 mtr in ground and 0.30 mtr over the ground including excavation & earth work in any type of soil and PCC complete comprising of the followings:- (a) Incoming supply:- (i) Aluminium bus bar 300 amps rating of 04 strip having suitable whole with nuts and bolts (ii) MCCB 160 Amps, 36 KA rupturing 04 pole415 Volt-01 No, (b) Outgoing Supply (iii) MCCB 100 Amp, 25 KA rupturing 03 pole, 415 Volts - 03 Nos(V) MCCB 63 Amp, 03 pole, 415 Volts - 03 Nos (VI) MCBSPN 40 Amp, 230 Volts-04 NosDigital type multifunctional meter showing A, V, Hz etc with suitable CT ratio -1No (vi) Indicating lamp Neon type for R-Y-B - 3 Nos. |
| 144 | M&L,earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth strip of 25x4 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I connected to earth test point using earth strip of 32X6mm as earth lead all as specified and testing on completion includingprovisionof earth lead protected by 40 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete. |
| 145 | Material and labour for steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-22 (8.5 metres long) including numbering of poles with aluminium paint and painting up to 1.5 meter above PCC benching of poles in black and white strips 3 number complete all as specified and as directed by Engr-in-Charge.(Excavation, earth work, foundation concrete and coping etc will be measured and paid separately). |
| 146 | S&F, in repair, GI pipe, 40mm bore, light grade, laid below road/fixed along thepoles / walls with necessary clamping,including taking down oldetc complete all as per specified and directed. |
| 147 | S&F GI pipe, 50mm bore, light grade, laid below road/fixed along thepoles / walls with necessary clamping,,including taking down oldetc complete all as per specified and directed. |
| 148 | S&F bracket made out of light grade, Galvanised steel tube, 35 mm bore, 1.2 Mtr length, bent to 120 degree for fixing street light fitting at the top, fixed to pole with necessary clamps made out of FI 40mm x 4mm with nuts & bolts including preparation of steel surfaces & apply two coat of synthetic enamel paint over red oxide prime rincluding taking dowo oldcomplete all as specified and directed. |
