|
| 1 | Works |
| 2 | Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C member including stacking of serviceable material and disposal of unserviceable from site of work with all lead and lift. |
| 3 | Dismantling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift (i) Not exceeding 3 sq.M. in area. |
| 4 | Dismentaling tiled or stone floors laid in mortar including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift. |
| 5 | Dismentaling of wooden False ceiling including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. |
| 6 | Excavation for foundation upto 1.5 mt. depth including sorting out and stacking of useful materials and disposing of the excavated stuff upto 50 meter lead. (B) Dense or hard soil. |
| 7 | Filling in foundation and plinth with brick Bats. Chhara in layers of 20cm. thickness including watering, ramming and consolidation etc. complete. |
| 8 | Providing and laying Cement concrete 1:2:4 (1-Cement : 2- Coarse sand : 4- Graded stone aggregates 20mm. Nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth. |
| 9 | White stone Bela masonry Block in course in Foundation & Plinth with stone of approved quality in Cement Mortar 1:5 (1-Cement : 5- course sand) including Racking the joints etc. complete. |
| 10 | Providing 20mm thick cement plaster in single coat on single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand). |
| 11 | 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12 mm. thick backing coat of C:M 1:3 (1- Cement : 3- sand) and 8 mm. thick finishing coat of C:M 1:1 (1- Cement : 1- sand) etc. complete. |
| 12 | Providing and laying Vitrified tiles 8 to 10 mm thick , 24\"\" x 24\"\" in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement. |
| 13 | P & L 24\" x 24\" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for antiskit. |
| 14 | Providing and laying Vitrified tiles 8 to 10 mm thick , in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry. |
| 15 | Providing and fixing 35 mm thick shutters for Doors, windows and clerestory windows including Indian teak wood frames 10 cm x 7 cm. size including anodized aluminum fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, complete. Fully Panelled. |
| 16 | Providing and fixing 30mm thick FACTORY MADE SOLID BOTH SIDE PRELAM PANEL PVC DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, top and bottom rails. M.S. frame shall have a coat of steel primer of approved makde and manufactures. M.S frame covered with 5mm thick heat moulded prelim PVC ‘C’ channel of siz 30mm thickness, 70 mm width of which 50mm shall be flat and 20mm shall be tapered in 45 degree Angle on either side forming stiles, and 5mm thick, 95mm wide pream PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side ot form top and bottom rail and 115mm wide prelim PVc sheet out of which 75nmm shall be flat and 20mm shall be tapered on both side to form lock rail, Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2) thick 20mm wide cross PVC sheet shall be provided as gap insert for top rail and bottom rails. Panelling of 5mm thck both side prelim PVC sheet to be fitted in the M.S. frame welded,sealed to the stiles and rails with 7mm (5mm + 2 mm) thick x 15mm wide PVC sheet beading on inner side, and joined togeth with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C” chanel using PVC solvent adhesive etc. complete as per direction of Engineering in charge, manufacture’s specification and rawing. |
| 17 | Providing and fixing 35 mm thick shutters for Doors, windows and clerestory windows including Indian teak wood frames 10 cm x 7 cm. size including anodized aluminum fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, complete Fully Glazed. |
| 18 | Providing and fixing 35mm thick factory made moulded door shuter consisting of solid core single leaf flush door of 30mm thickness, lipped with 15mm (5mm x 3) thick x 30mm width on one stiles and top rail and 10mm (5mm x 2) thick x 30mm width on the other stiles and bottom rails. The inner panel laminated with 2mm thick termite proof, water proof and fire resistant moulded PVC sheet with 2,4,6 raised panel design in different plain and /or prelim colours on one side after routing the moulded design on flush door and 2mm plain and/or prelim PVC sheet on other side using rubber adhesive on flush door and solvent cement adhesive on the PVC liping etc. complete as per direction of Engineer in charge, manufacture’s specification and drawing. |
| 19 | Providing and fixing playwood lining with but jointed and nails (frame work and cover fillets to be measured and paid for separately) (i) 6mm thick ply. |
| 20 | Providing & Fixing 6mm thick asbestos cement corrugated sheets roofing fixed with galvanised iron J or L hooks, bolts and nuts 8mm dia. GI Plain and bitumen washers complete (excluding the cost of purlins, rafter and trusses). |
| 21 | Providing and Fixing ridges, and hips in asbestos cement sheet roofing with GI J or L hooks, bolts and nuts 8mm dia. GI Plain and bitumen washers complete. |
| 22 | Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws. (A) Plain Grill. |
| 23 | Applying priming coat over new steel and other metel surface after and inclduing preparing the surface by throughly cleaning, oil, grease, dirt and other foreign matter and scored with brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red lead. |
| 24 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint, brushing, interior to give an even shade including cleaning the surface an even shade including cleaning the surface of all dirt, dust and other foreign matter. |
| 25 | Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. |
| 26 | Finishing Wall with weather proof exterior emulsion paint on wall surfase (Two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials etc. complete. |
| 27 | Providing a cooking platform of 25 mm thick one side polish kota stone sandwich type double kota stone in top and vertical partition having 75cm in width and 75cm in hight by using cement mortar (1:3) for sandwiching kota stone. Vertical partition shall be provided 1 m c/c. Frontage of platform shall be fitted with kota stone strip of 75mm wide. One washing sink of kota stone shall be provided as per required size. All kota stone shall be embedded in side walls and bottom including polishing cutting fitting and alllabour etc. complete. |
| 28 | Providing and laying marble stone slab flooring over 20mm. (average) base of cement mortar 1:6 (1-Cement : 6-coarse sand) or L.M 1:1.5 (1-lime putty : 1.5-coarse sand) laid and jointed with gray cement slurry including rubbing and polishing complete. (A) Marble slab 25mm. thick. |
| 29 | Providing and Supplying in standard length ISI mark rigid unplasticised PVC pipes suitable for potable water with ringfit joint including cost of rings, as per IS specification no. 4985/1988 including all local and central taxes. transportation freight charges, octroi, inspection charges. lading unloading, conveyance to the departmental stores and including cost of jointing material etc. complete Test Pressure 6 Kg/Cm2 with excise Duty 110mmdia. |
| 30 | Providing and Supplying in standard length ISI mark rigid unplasticised PVC pipes suitable for potable water with ringfit joint including cost of rings, as per IS specification no. 4985/1988 including all local and central taxes. transportation freight charges, octroi, inspection charges. lading unloading, conveyance to the departmental stores and including cost of jointing material etc. complete Test pressure 6 Kg/Cm2 with Excise Duty 75mm dia. |
| 31 | Providing and fixing cast iron spigot and socket soil, waste and ventilating pipes of the following nominal size. (B) 75mm. dia. |
| 32 | Providing and fixing cast iron spigot and socket soil, waste and ventilating pipes of the following nominal size. (C) 100mm. dia. (upto 10 ton). |
| 33 | Providing and fixing in position cowel went to pipes.(B) 75mm. dia. |
| 34 | Providing and fixing in position cowel went to pipes.(C) 100mm. dia. |
| 35 | Providing and fixing cast iron (Spun) Nahni trap of the following nominal diameter of self cleaning design with C.I. screaed down or higned grating including cost of cutting and making good the walls and floor 100mm. inlet and 50mm. outlet. (C) 100mm. dia. |
| 36 | Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm. (Earthwork, bed concrete, foot reste and trap to be measured and paid for separately) (A) Vitreous China. (I) Long pattern white colour. |
| 37 | Providing and fixing 100mm. Size P or S trap for water closet sqatting pan including jointing the trap with the pan and soil pipe in cement mortar 1:1 (1-Cement : 1- Fine sand) (A) Vitreous China. |
| 38 | Providing and fixing in position with clamps etc. 32mm. Nominal internal diameter galvanised steel tube flush pipe for high level flushing cistern including connecting the flush pipe with cistern and closet and making good the walls and floors. |
| 39 | Providing and fixing G.I. inlet connection for flush pipe with W.C. Pan. |
| 40 | Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings. (A) Vitreous china (ii) Flat Back washbasin 550mm X 400mm size. (i) In white colour. |
| 41 | Providing and fixing Kitchen sink with C.I. or M.S. brackets,painted white including cutting holes in walls and making good the same but excluding fittings. (C) Vitreous China Sink. (i) 600mm X 450mm X 150mm size. |
| 42 | Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mm. dia. |
| 43 | Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm. Dia. |
| 44 | Providing and fixing 100mm. Sand cast iron grating for gully, floor or Nahni trap. |
| 45 | Providing and fixing C.P. brass shower rose with 15mm. Or 20mm. Inlet. (A) 100mm. Dia. Each. |
| 46 | Providing and fixing 600mm. X 450mm.Bevelled edge mirror of superior glass moumted on 6mm. Thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers. |
| 47 | Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws. (B) 600mm. X 20mm. size. |
| 48 | Providing and fixing 600mm. X 120mm. Glass shelf with C.P. brass brackets and guard rail complete mixed to wooden plug with C.P. brass screws. |
| 49 | Providing and fixing screw down bib taps of following size. (B) Brass chromium plated scews down Bib Tap. (i) 15mm. Dia. |
| 50 | Providing and fixing Pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm. Dia. |
| 51 | Providing and fixing brass screw down stop tap. (A) 15mm. Dia. |
| 52 | Providing and fixing Gun metal check or non-return fullway wheel valve. (A) 15mm. Dia. |
| 53 | Providing and fixing Gun metal check or non-return fullway wheel valve. (C) 25mm. Dia. |
| 54 | Providing and fixing Gun metal check or non-return fullway wheel valve. (E) 40mm. Dia. |
| 55 | Providing and fixing chromium plated brass half turn flush cock of approved quality including fixing in pipe line etc. complete. (iii) 32mm. Dia. |
| 56 | Providing and fixing Rubber plug for sink or washbasin. |
| 57 | Providing and fixing Chromium plated bottle trap with necessary couplings of approved quality for washbasin. |
| 58 | Providing and fixing ball cock of approved quality as directed. (A) Copper Metal (i) 25mm. Dia. |
| 59 | Providing and fixing C.I. Manhole cover 0.60mt. X 0.45mt. Size having weight not less than 35Kg. |
| 60 | Providing laying and jointing in true line and level 15mm. Dia U.P.V.C. pipe ( SCH-40 ) for cold water including fitting make PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent as approved by Engineer in Charge. Pipe shall be fixed on the wall eith the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvant, including cost of all materials. |
| 61 | Providing laying and jointing in true line and level 25mm. Dia U.P.V.C. pipe ( SCH-40 ) for cold water including fitting make PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent as approved by Engineer in Charge. Pipe shall be fixed on the wall eith the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvant, including cost of all materials. |
| 62 | Providing laying and jointing in true line and level 40mm. Dia U.P.V.C. pipe ( SCH-40 ) for cold water including fitting make PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent as approved by Engineer in Charge. Pipe shall be fixed on the wall eith the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvant, including cost of all materials. |
| 63 | Providing and fixing S.W. gully trap with C.I. grating brick masonary chamber and water tight C.I. cover with frame of 300mm. X 300mm. size (inside) with standard weight. (i) Square mouth traps. (A) 100mm. X 100mm. size P type. (upto 10 ton). |
| 64 | Construction brick masonry chamber for underground C.I. inspection chamber and bends with bricks having croshing strength not less than 35Kg./Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm. X 610mm. internal dimensions total weight of cover with frame to be not less then 38 kg (weight of cover 23 kg and weight of frames 15kg), ( R.C.C. top slab with 1:2:4 mix (1-cement : 2 coarse sand:4 graded stone aggregate 20mm nominal size), foundation concrete 1:5:10 inside plastering 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete. (i)inside dimensions 455mm. X 610mm. and 450mm. deep for single pipe line. (upto 10 ton). |
| 65 | Providing sock pit of 5.00 Cum. Volume including excavating and filling brickbats with dry masonary work at top for 45cm. height including covering the top with stone including providing vatas in C.M. 1:3 with finishing curing etc. complete as directed. (upto 10 ton). |
| 66 | Providing erecting and fixing double coated Syntex PVC (ISI) water tank of required capacity each with all necessary fittings and connection etc. complete on terrace. |
| 67 | Providing ande fixing Urinal of approved quality including conecting the Urinal with waste pipe,trap etc. complete. (A) White earthenware flat back or corner type size 430mm.X 260mm.X 350mm. |
