|
| 1 | Item No.1 Excavation for catch / side gutters in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils.R.A.1 |
| 2 | Item No.2 Excavation for catch / side water gutters in Hard rock strata to the specified section including stacking the excavated stuff in a regular bund by chiselling and wedging and disposing of unsuitable or excess stuff as directed. R.A.2 |
| 3 | Item No.3 Providing laterite/dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.R.A.3 |
| 4 | Item No. 4 Providing and laying Cast in situ/Ready Mix cement concrete in M-10of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork,laying/pumping, compacting, roughening them if special finish is to beprovided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)R.A 4 |
| 5 | Item No.5 Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)R.A.5 |
| 6 | Item No.6 Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/ pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) R.A.6 |
| 7 | Item No.7 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) R.A.7 |
| 8 | Item No.8 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. R.A.8 |
| 9 | Item No.9 Providing Laterite stone massonary in cement mortar 1;6 in foundation and plinth incliding racking out joints when plastering is to be done /striking out joints where no plastering is to be done watering and scaffolding .R.A.9 |
| 10 | Item No.10 Providing Laterite stone massonary in cement mortar 1;6 in super structure incliding racking out joints when plastering is to be done /striking out joints where no plastering is to be done watering and scaffolding .. R.A.10 |
| 11 | Item No.11 Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast interlocking cement concrete paving blocks 80MM thick in M-40 grade of approved size and shape for City streets, small /medium market roads, low volume roads ,utility cuts on arterial roads etc.as specified and as per IS15658:2006 including cos tofallmaterials,manufacturing,curing,transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand/ crushed sand of 50 mm thickness including necessary excavation in all stratas,spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator etc. complete.R.A.11 |
| 12 | Item No.12 Back filling behind abutment, wing wall and return wall as per drawings and technical specifications etc. complete. (by granular material)R.A.12 |
| 13 | Item No.13 Conveying excavated material up to 5 km.. R.A.13 |
| 14 | Item No.14 Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipesof 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixturesand fastening including pipe base of appropriate diameter and ball base of 75 mm diaabove newel post of 75 mm diameter etc. complete (Prior approval of sample andbrand by Ex.Engineer is necessary before use)R.A.14 |
| 15 | Item No.15 Providing and Fixing mild steel grill gate as per detailed drawingmm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipesof 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixturesand fastening including pipe base of appropriate diameter and ball base of 75 mm diaabove newel post of 75 mm diameter etc. complete (Prior approval of sample andbrand by Ex.Engineer is necessary before use)R.A.14 |
| 16 | Item No.16 Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx 35mmx 3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge R.A.15 |
| 17 | royalty charges for stone |
| 18 | royalty charges for sand |
| 19 | testing |
| 20 | insurance |
| 21 | gst |
