|
| 1 | 11 KV AB Switch Polymer type 400 Amp with Complete fitting |
| 2 | 11 KV D.O. Fuse Unit Polymer type |
| 3 | 11 KV Strain hardware (T&C type) fittings |
| 4 | 11 KV(45KN) Composite Polymer Disc Insulators |
| 5 | 140 Kg.,8.0 Mtrs. long PCC pole |
| 6 | 9 KV Gapless type ( 5KA) Polymer for DTR |
| 7 | AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.) |
| 8 | BIS certified Energy Efficiency Level-III (Old)/Level-II (New) Convential 11/0.433KV, 100 KVA Distribution Transformer |
| 9 | LT XLPE AB CABLE 3X95+1X16+1X70 Sq. mm. with aluminium alloy insulated messenger wire |
| 10 | LT XLPE Cable Arial Bunch 3X120 + 1X16 + 1X70 Sq mm. with aluminium alloy insulated messenger wire 1100 Volts |
| 11 | M S Channel 100X50x6 mm |
| 12 | Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box |
| 13 | WPB160x160mm,30.44 Kg/Meter H beam,13 mtr long |
| 14 | XLPE Cable 1 core unarmoured 150 sqmm Aluminium conductor 1100 Volts |
| 15 | XLPE Cable 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts |
| 16 | Aluminium paint |
| 17 | Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) |
| 18 | Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg) |
| 19 | Bentonite compound powder |
| 20 | Bi-metallic clamps Distribution Transformers Bushing |
| 21 | Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC |
| 22 | Clamp for 140 Kg PCC Pole MS Flat 50x6 mm |
| 23 | Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) |
| 24 | Clamps for neutral for AB Cable |
| 25 | Complete jumpering of DTR |
| 26 | Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay |
| 27 | Concreting of structures & foundation (1:3:6) |
| 28 | Danger Boards Enamelled 11 KV |
| 29 | Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire |
| 30 | G.I. STRIP 25X3 MM1 |
| 31 | G.I.Pipe 40 mm Dia C grade type |
| 32 | Galvanized nut & bolt with washer |
| 33 | LT A B cable Suspension clamps (Galvanized) |
| 34 | LT A.B Cable tension clamps (Galvanized) |
| 35 | LT distribution box with 1.2 mm thick MS powder coated sheet, 200 A MCB on incoming & 6 no. 125 A HRC fuse base including 100 A HRC fuse , For 100 KVA Transformer |
| 36 | M S Channel 75X40x6 mm |
| 37 | M.S.Angle 50x50x6 mm |
| 38 | M.S.Nuts with Bolts |
| 39 | Piercing connector Type-I for single/three phase (Main 16-50 sqmm tap-off 16-50 sqmm) |
| 40 | Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm) |
| 41 | Red oxide paint |
| 42 | Single Phase Service connection box (Deep Drwan Metal Service Connection Boxes )with one incoming up to 25 mm2 and 8 no outgoing up to 10 mm2 with insulated multiple outgoing connector- |
| 43 | Stay set complete without Stay wire 16 mm. (Painted) |
| 44 | STAY WIRE 7/3.15 MM.(7/10 SWG) |
| 45 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 46 | Three Phase Service connection box(Deep Drwan Metal Service Connection Boxes ) with one incoming up to 35 mm2 and 4 no outgoing up to 16 mm2 with insulated multiple outgoing connector- |
| 47 | Lebour Charge for Compny Side Material |
| 48 | Lebour Charge for Compny Side Material paide to Cont. % |
| 49 | SGST @ 9% |
| 50 | CGST @9% |
