Tender For Proposed Estimate For Samaj Mandir Sabha Gruh Agargaon Sutarwadi At Lanja Tal Lanja Dist. Ratnagiri. - Cleaning the site, all the shrubs, vegition & bushes above ground level rubbish surface, dressing of area to give an even area ete. Complete 2 Item No. 2: Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) 3 Item No. 3: Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming. watering including shoring and strutting etc. complete. (Lift upto 1.5m.) 4 Item No. 4: Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. ineluding trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m). 5 Item No. 5: Filling in plinth and floors with approved excavated material in 15cm to 20cm layers including watering and compacting etc. complete. 6 Item No. 6: Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm to 20cm including watering and compaction etc. complete. 7 Item No. 7: Providing preconstructional antitermite treatment as per I.S.6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. 8 Item No. 8: Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 em thick including hand packing and compacting etc. complete 9 Item No. 9: Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/ gneiss metal for foundation and bedding/steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate Crushed sand VSLGrade) 10 Item No. 10: Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks laying/pumping. compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc, complete. With natural sand/V S.I. quality Artificial Sand 11 Item No. 11: Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering. formwork.cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mis plant (Pan mixer) etc, complete. With natural sand/V.S.I. quality Artificial Sand 12 Item No. 12: Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping. compactionand roughening the surface if special finish is to be provided and curing etc. complete (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I quality Artificial Sand 13 Item No. 13: Providing and laving Cast in situ/Ready Mix cement concrete M-30 of trap/ granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering. formwork, cover blocks, laying/pumping. compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.L quality Artificial Sand 14 Item No. 14: Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches ete as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete 15 Item No. 15: Providing laterite stone masonry in cement mortar 1:6 in foundation and plinth including striking joints on the unexposed faces and watering complete. 16 Item No. 16: Providing laterite stone masonry in cement mortar 1:6 in superstructure including racking out joints where plastering is to be done watering and scaffolding complete 17 Item No. 17: Providing and fixing in position (as per LS.1868/1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/One Running Metre and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/One Running Metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/One Running Metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. Mithaalam Anodicina uithout how 18 Item No. 18: Providing and fixing frame with/without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete 19 Item No. 19: Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35mm thick style and rail with 25 mm thick panels with operable fan light as per detailed drawings Exchiding the door frame 60mm x 100mm stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats. (Excluding the door frame) 20 Item No. 20: Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 min thick in cement mortar 1.4 using waterproofing compound at 1 kg per cement, bog euring the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. 21 Item No. 21: Providing internal cement plaster 12 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete 22 Item No. 22: Providing and applying gypsum plaster Metre (with Gypsum material) with finishing with gypsum material in 10 to 13 milluneter thickness to previously plastered surface/or on newly brick surface ( Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete. (For Celling) 23 Item No. 23: Providing and laying in position flooring Meye of telephone black/Amba White/Cat bary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 coment mortar including cement floats striking joints, pointing in CM. 1:3 curing and cleaning ete, complete 24 Item No. 24: Providing and fixing machine cut black/Amba White/Cat bary brown/RBI red/Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1.4 Cement mortar including float filling joints with nest cement slurry curing polishing and cleaning etc. complete 25 Item No. 25: Providing and laying telephone black/Amba White/Cadburybrown/Ruby red/Ocean Brown granite stone of 18 to 20 mm thick for door frame/dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. 26 Item No. 26: Providing fixing Mangalore tile roofing with class AA tiles in cement mortar 1:4 on sloping slab including necessary scaffolding, curing, finishing. ete. complete 27 Item No. 27: Providing and fixing Mangalore tile ridge and hip tiles of class AA including scaffolding if necessary, pointing with coloured cement mortar and curing etc. complete 28 Item No. 28: Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 40 mm thickness of having a strength of 200 Kilogram/Sq.cm of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning ete. complete. 29 Item No. 29: Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including leaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete. 30 Item No. 30. Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete 31 Item No. 31: Providing and applying white-wash in one coat on old/new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing 32 Item No. 32: Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding. preparing the surfaces (excluding the primer cont.) etc. complete 33 Item No. 33: Providing and fixing mild steel grill work for windows, ventilators etc. 15 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete 34 GST 35 Insurance Charges 36 Electrification Charges 37 Testing Charges 38 Royalty Charges for other minerals 39 Royalty Charges for sand
