Tender For Construction Of Office And Residential Quarters At Bip Thangu, North Sikkim., North Sikkim-Sikkim

TDR : 51493263

Tender Notice
BOQ

Expired

North Sikkim , Sikkim

Tender Brief : Tender For Construction Of Office And Residential Quarters At Bip Thangu, North Sikkim.

Document Fees
₹ 100000 /-

EMD
₹ 2488180.0 /-

Tender Value
₹ 9.95 Crore /-

Submission Date
27-10-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	SCHEDULE OF RATES FOR SIB OFFICE AT THANGU NORTH SIKKIM.
2	Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
3	Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual means)
4	Providing and Laying in position cement concrete of 1:2:4 mix.(1 cement, 2 coarse sand, 4 graded stone aggregate of 20mm & down size) including compacting curing etc all complete.
5	Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 70% cleanhard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction ofEngineer in Charge.
6	Providing and laying in position 1:1.5:3 mix ( 1 cement, 1.5 coarse sand, 3 graded stone aggregate 20mm and down nominal gauge) of reinforced cement concrete excluding the cost of formwork, finishing and reinforcement.
7	Supplying, bending and placing in positionsteel reinforcement in all R.C.C works including cost of binding wires all complete. ( including 10% extra for earthquake resistance)
8	Providing, fixing & removing form work for casting R.C.C items as indicated below: with local timber from inside the state)
9	Foundation, footings, base of column etc for mass concrete.
10	Beam, lintels, girders, brersumers and cantilevers.
11	Square columns
12	Floor slab, roof slab, landing, balcony and access platform.
13	Filling inside plinth in building works with23cm layers, consolidated to 15cm including watering, ramming etc, all complete.
14	Mixed Filling
15	Stone Filling
16	Providing and Laying first class brick work in one brick thick in superstructureof standard size bricks with 1:5 cement mortar (1cement and 5 clean coarse sand) as per the direction of Engineer in Charge includingcuring etc all complete.
17	Providing and Laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 coarse sand) as per the direction of Engineer in Charge includingcuring etc all complete.
18	Providing, fitting and fixing of dressed sal timber in all types of frames complete.(wiyh locally available timber)
19	Providing hold fast of (40x5)mm flat iron including fixing to frame with 10mm dia. Bolts nuts and timber plugs and embedding in CC 1:3:6 ( 1 cement, 3 coarse sand, 6 graded stone aggregate 2omm nominal size) block of size (30x10x15)cm. as per the direction of Engineer - in- Chargeall complete:
20	Providing and laying 15mm thick cement plaster of 1:3 mix in single coat including finishing even and smooth and curing etc all complete.
21	Providing, fitting and fixing 38mm flooring in sal timber over a frame of sal timber excluding the cost of polishingand including cost of one coat priming on the base frame complete.
22	Providing and Laying white or colored glazed tilesanti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalentin flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
23	Providing and Laying white or coloredglazed tiles of size 200mm x 300mm of plain/normal prints colours (white, grey, ivory, platinum, cream, glacier white, summers and, beach, wood duro, melody, or equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry.
24	Providing and Laying flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0 sqm of20mm thick laidover 20mm(average)1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete.
25	Providing and Laying 20mm thick marble in Risers of steps, skirting and pads, walls, pillars etc laid on 10mm thick base c.m. 1:3 and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete (Raj agar Plain Marble / Udaipur green marble or equivalent)
26	Providing box drain of 30 cm (ht) x 45 cm (width) internal dimension with 1:2:4 Plum concrete (20mm & down) inside walls thickness of 23 cm (hill side) and 30 cm (road side)and 1:3:6 (20 mm & down) base concrete of thickness of 15 cmwith standard specification over 15 cm stone soling including providing & laying guard stones complete, as per thedirection of theEngineer in Charge.
27	Providing fitting and fixing in position of fully paneled shutters in windows and doors of champ timber or equivalent including steel butt hinges screws 12mm thick panels etc complete 35mm.
28	Providing, fixing and fitting sliding door bolts with nuts and screws etc complete.
29	Brass ( bright finish)(300x16mm)
30	Providing and fixing tower bolts 300x100mm ( Barrel type with necessary screws etc complete.
31	Providing, fitting and fixing handles 125mm size with necessary screws etc complete.
32	Providing and fixing Brass bright finished brass butt hinges with necessary screws etc. complete.
33	Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation inprofile dimension in higher side shall be accepted but no extra payment on
34	Providing and fixing glazing in Al. doors and windows ventilator shutters and partitions etc. with PVC / neoprene gasket with CP brass / stain less steel screws etc. complete as per architectural drawings and direction of Engineer - in- Charge.
35	Providing and fixing M.S grills in timber frames of windows with M.S flats with nuts, bolts, and smooth finishing of welded joints/surface with Grills weighing8.00Kg/sqm as per the direction of Engineer - in- Chargeall complete
36	Providing and installation of wall panelling made of Timber (Pinewood or equivalent)panel (Tongue and Groove panelling) withminimum size of 127 x 12 mm with Furring Strips as framework system with provision of wainscotting at the top and skirting and base shoe at the bottom with necessary nails, screw ,etc including varnishing on the finished surface all completeas per drawing and direction of the Engineer in-charge.
37	Supplying, fabricating, fitting and fixing steel tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc as per the standard specification and design and direction of Engineer - in- Chargeall complete.
38	Providing, fitting, fixing of 24 BWG prepainted (HULLAS) sheet roofing with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with epoxy in each bolts (8 to 10 gm per bolt) including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage complete.
39	Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG pre-painted (HULLAS) Sheet fixed with G.I, J or L hooks bolts & nuts 8mm dia filled with epoxy in each bolts (8 to 10 gm per bolt), Limpets, Bitumen washers etc. all complete.
40	Providing fitting and fixing 16mm thick valley of 90cm overall width in plain Pre-painted HULAS sheet class I fixed with GI J or L hooks, bolts and nuts 8mm dia GI limpet and bitumen washers complete.
41	Providing, fitting and fixing 23cm deep 24BWG Pre-painted HULAS. sheet eaves board including (50mmx25mm) dressed sal timber beading and M.S. Rod brackets all complete.
42	Providing / Fitting / Fixing 25mmceiling in wooden framespanisazor equivalent including frame work excluding the cost of polishing and primingall complete.
43	Varnishing two or more coats with Copal varnish or superior quality spray varnish including preparation of surface with timber putty, sand paper etc on new work complete.
44	Providing and French spirit polishing two or more coats including cleaning of the surface of dirt and dust papered smooth etc on new surface complete.
45	Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete:
46	Providing and Providing and painting with plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete.
47	Providing and distempering with acrylic exterior paints of approved brand or manufactureequivalent to EXCEL WEATHER SHIELD to give an even shade on new surface incld preparation of surface etc complete.
48	Providing and laying. Chisel Dressed Stone Masonry with chisel dressed clean hard selected stone in 1:5 Cement Mortar (1cement, 5 coarse sand) including centering, lining and curing etc as per the direction of Engineer in Charge, all complete.
49	Provision for hand railings and external designs(to be paid as per actual measurement)
50	Providing and Laying40 mm thick 1:2:4 c.c. (1cement, 2coarse sand,4 of 12.5mm and down stone aggregate) flooring withfloating coat of neat cement to give a smooth surface in not exceeding 02 sqm. including cost of glass strips and curing etc complete in all building floors wherever specified.
51	Carriage of Stock Materials.
52	Loading and Unloading of Cement or Steel by Manual Means and Stacking.
53	Cost of Haulage Excluding Loading and Unloading. Surfaced Road
54	Carriage ofNon-Stock Materials.
55	Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum.
56	Cost of Haulage Excluding Loading and Unloading. Surfaced Road
57	Sand
58	Stone
59	Stone Chips
60	SCHEDULE OF RATES FOR SIB Quarter II AT THANGU NORTH SIKKIM.
61	Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
62	Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual means)
63	Providing and Laying in position cement concrete of 1:2:4 mix.(1 cement, 2 coarse sand, 4 graded stone aggregate of 20mm & down size) including compacting curing etc all complete.
64	Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 70% cleanhard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction ofEngineer in Charge.
65	Providing and laying in position 1:1.5:3 mix ( 1 cement, 1.5 coarse sand, 3 graded stone aggregate 20mm and down nominal gauge) of reinforced cement concrete excluding the cost of formwork, finishing and reinforcement.
66	Supplying, bending and placing in positionsteel reinforcement in all R.C.C works including cost of binding wires all complete. ( including 10% extra for earthquake resistance)
67	Providing, fixing & removing form work for casting R.C.C items as indicated below: with local timber from inside the state)
68	Foundation, footings, base of column etc for mass concrete.
69	Beam, lintels, girders, brersumers and cantilevers.
70	Square columns
71	Floor slab, roof slab, landing, balcony and access platform.
72	Filling inside plinth in building works with23cm layers, consolidated to 15cm including watering, ramming etc, all complete.
73	Mixed Filling
74	Stone Filling
75	Providing and Laying first class brick work in one brick thick in superstructureof standard size bricks with 1:5 cement mortar (1cement and 5 clean coarse sand) as per the direction of Engineer in Charge includingcuring etc all complete.
76	Providing and Laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 coarse sand) as per the direction of Engineer in Charge includingcuring etc all complete.
77	Providing, fitting and fixing of dressed sal timber in all types of frames complete.(wiyh locally available timber)
78	Providing hold fast of (40x5)mm flat iron including fixing to frame with 10mm dia. Bolts nuts and timber plugs and embedding in CC 1:3:6 ( 1 cement, 3 coarse sand, 6 graded stone aggregate 2omm nominal size) block of size (30x10x15)cm. as per the direction of Engineer - in- Chargeall complete:
79	Providing and laying 15mm thick cement plaster of 1:3 mix in single coat including finishing even and smooth and curing etc all complete.
80	Providing, fitting and fixing 38mm flooring in sal timber over a frame of sal timber excluding the cost of polishingand including cost of one coat priming on the base frame complete.
81	Providing and Laying white or colored glazed tilesanti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalentin flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
82	Providing and Laying white or coloredglazed tiles of size 200mm x 300mm of plain/normal prints colours (white, grey, ivory, platinum, cream, glacier white, summers and, beach, wood duro, melody, or equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry.
83	Providing and Laying flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0 sqm of20mm thick laidover 20mm(average)1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete.
84	Providing and Laying 20mm thick marble in Risers of steps, skirting and pads, walls, pillars etc laid on 10mm thick base c.m. 1:3 and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete (Raj agar Plain Marble / Udaipur green marble or equivalent)
85	Providing box drain of 30 cm (ht) x 45 cm (width) internal dimension with 1:2:4 Plum concrete (20mm & down) inside walls thickness of 23 cm (hill side) and 30 cm (road side)and 1:3:6 (20 mm & down) base concrete of thickness of 15 cmwith standard specification over 15 cm stone soling including providing & laying guard stones complete, as per thedirection of theEngineer in Charge.
86	Providing fitting and fixing in position of fully paneled shutters in windows and doors of champ timber or equivalent including steel butt hinges screws 12mm thick panels etc complete 35mm.
87	Providing, fixing and fitting sliding door bolts with nuts and screws etc complete.
88	Brass ( bright finish)(300x16mm)
89	Providing and fixing tower bolts 300x100mm ( Barrel type with necessary screws etc complete.
90	Providing, fitting and fixing handles 125mm size with necessary screws etc complete.
91	Providing and fixing Brass bright finished brass butt hinges with necessary screws etc. complete.
92	Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation inprofile dimension in higher side shall be accepted but no extra payment on
93	Providing and fixing glazing in Al. doors and windows ventilator shutters and partitions etc. with PVC / neoprene gasket with CP brass / stain less steel screws etc. complete as per architectural drawings and direction of Engineer - in- Charge.
94	Providing and fixing M.S grills in timber frames of windows with M.S flats with nuts, bolts, and smooth finishing of welded joints/surface with Grills weighing8.00Kg/sqm as per the direction of Engineer - in- Chargeall complete
95	Providing and installation of wall panelling made of Timber (Pinewood or equivalent)panel (Tongue and Groove panelling) withminimum size of 127 x 12 mm with Furring Strips as framework system with provision of wainscotting at the top and skirting and base shoe at the bottom with necessary nails, screw ,etc including varnishing on the finished surface all completeas per drawing and direction of the Engineer in-charge.
96	Supplying, fabricating, fitting and fixing steel tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc as per the standard specification and design and direction of Engineer - in- Chargeall complete.
97	Providing, fitting, fixing of 24 BWG prepainted (HULLAS) sheet roofing with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with epoxy in each bolts (8 to 10 gm per bolt) including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage complete.
98	Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG pre-painted (HULLAS) Sheet fixed with G.I, J or L hooks bolts & nuts 8mm dia filled with epoxy in each bolts (8 to 10 gm per bolt), Limpets, Bitumen washers etc. all complete.
99	Providing fitting and fixing 16mm thick valley of 90cm overall width in plain Pre-painted HULAS sheet class I fixed with GI J or L hooks, bolts and nuts 8mm dia GI limpet and bitumen washers complete.
100	Providing, fitting and fixing 23cm deep 24BWG Pre-painted HULAS. sheet eaves board including (50mmx25mm) dressed sal timber beading and M.S. Rod brackets all complete.
101	Providing / Fitting / Fixing 25mmceiling in wooden framespanisazor equivalent including frame work excluding the cost of polishing and primingall complete.
102	Varnishing two or more coats with Copal varnish or superior quality spray varnish including preparation of surface with timber putty, sand paper etc on new work complete.
103	Providing and French spirit polishing two or more coats including cleaning of the surface of dirt and dust papered smooth etc on new surface complete.
104	Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete:
105	Providing and Providing and painting with plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete.
106	Providing and distempering with acrylic exterior paints of approved brand or manufactureequivalent to EXCEL WEATHER SHIELD to give an even shade on new surface incld preparation of surface etc complete.
107	Providing and laying. Chisel Dressed Stone Masonry with chisel dressed clean hard selected stone in 1:5 Cement Mortar (1cement, 5 coarse sand) including centering, lining and curing etc as per the direction of Engineer in Charge, all complete.
108	Provision for hand railings and external designs(to be paid as per actual measurement)
109	Providing and Laying40 mm thick 1:2:4 c.c. (1cement, 2coarse sand,4 of 12.5mm and down stone aggregate) flooring withfloating coat of neat cement to give a smooth surface in not exceeding 02 sqm. including cost of glass strips and curing etc complete in all building floors wherever specified.
110	Carriage of Stock Materials.
111	Loading and Unloading of Cement or Steel by Manual Means and Stacking.
112	Cost of Haulage Excluding Loading and Unloading. Surfaced Road
113	Carriage ofNon-Stock Materials.
114	Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum.
115	Cost of Haulage Excluding Loading and Unloading. Surfaced Road
116	Sand
117	Stone
118	Stone Chips
119	SCHEDULE OF RATES FOR SIB OFFICE AT THANGU NORTH SIKKIM.
120	Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
121	Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual Means)
122	Providing and Laying in position cement concrete of 1:2:4 grade including compacting curing etc all complete.1:2:4 mix.(1 cement, 2 coarse sand, 4 graded stone aggregate of 20mm & down size)
123	Sand filling in building works in layer not exceeding 20cum including watering, ramming etc, all complete.
124	Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 70% cleanhard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction ofEngineer in Charge.
125	Providing and Laying in position 1:1.5:3 grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.
126	Providing, fixing & removing form work for casting R.C.C items as indicated below: with local timber from inside the state)
127	Foundation, footings, base of column etc for mass concrete.
128	Beam, lintels, girders, brersumers and cantilevers.
129	Square columns
130	Floor slab, roof slab, landing, balcony and access platform.
131	Supplying, bending and placing in position tor steel reinforcement in all R.C.C works including cost of binding wires, all complete.0
132	Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 course sand) including carriage of bricks up to work site, curing etc all complete.
133	Providing and Laying 20mm thick cement plaster of 1:4 mix in single coat including finishing even and smooth and curing etc all complete.
134	Providing and Laying40 mm thick 1:2:4 c.c. (1cement, 2coarse sand,4 of 12.5mm and down stone aggregate) flooring withfloating coat of neat cement to give a smooth surface in not exceeding 02 sqm. including cost of glass strips and curing etc complete in all building floors wherever specified.
135	Providing, fitting and fixing 38mm flooring in sal timber over a frame of sal timber excluding the cost of polishingand including cost of one coat priming on the base frame complete.
136	Providing / Fitting / Fixing 25mmceiling in wooden framespanisazor equivalent including frame work excluding the cost of polishing and primingall complete.
137	Providing, fitting and fixing of dressed sal timberin all types of frames complete
138	Providing, fitting and fixing water proof flush door shutters, solid block hard core construction with frame of 1st class hard timber with well matched 3mm teak ply decorative type on one faces of the shutters including hinges with screws complete.
139	Providing hold fast of (40x5)mm flat iron including fixing to frame with 10mm dia. Bolts nuts and timber plugs and embedding in CC 1:3:6 ( 1 cement, 3 coarse sand, 6 graded stone aggregate 2omm nominal size) block of size (30x10x15)cm. as per the direction of Engineer - in- Chargeall complete:
140	Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete.
141	Providing, fitting and fixing. handles 125mm size with necessary screws etc complete.
142	Providing and fixing Tower bolt 150x10mm with necessary screws etc complete.
143	Providing and applying priming coat with ready mixed pink on timber work including preparation of the surface by thoroughly cleaning and sand papering etc complete
144	Providing and painting with ready mixedpaint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface.
145	Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation inprofile dimension in higher side shall be accepted but no extra payment on this account shall be made
146	Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete:
147	Providing and Providing and painting with plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete.
148	Providing and installation of wall panelling made of Timber (Pinewood or equivalent)panel (Tongue and Groove panelling) withminimum size of 127 x 12 mm with Furring Strips as framework system with provision of wainscotting at the top and skirting and base shoe at the bottom with necessary nails, screw ,etc including varnishing on the finished surface all completeas per drawing and direction of the Engineer in-charge.
149	Providing and Laying white or colored glazed tilesanti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalentin flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
150	Providing and Laying white or colored or ceramic glazed tiles of size 200mm x 300mm Special colour(black, burgundy, pink, midnight blue, alpine blueor equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry.
151	Supplying, fabricating, fitting and fixing steel tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc as per the standard specification and design and direction of Engineer - in- Chargeall complete.
152	Providing, fitting, fixing of 24 BWG Pre-painted HULASsheet roofing with lapping of 150mm (two corrugation)with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including carriage all complete
153	Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Pre-painted HULASSheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete.
154	Providing, fitting and fixing 23cm deep 24BWG G.P. sheet eaves board including (50mmx25mm) dressed sal timber beading and M.S. Rod brackets complete.
155	Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on New surface.
156	Providing box drain of 30 cm (ht) x 45 cm (width) internal dimension with 1:2:4 Plum concrete (20mm & down) inside walls thickness of 23 cm (hill side) and 30 cm (road side)and 1:3:6 (20 mm & down) base concrete of thickness of 15 cmwith standard specification over 15 cm stone soling including providing & laying guard stones complete, as per thedirection of theEngineer in Charge.
157	Providing and laying. Chisel Dressed Stone Masonry with chisel dressed clean hard selected stone in 1:5 Cement Mortar ( 1cement, 5coarse sand) including centering, liningand curing etc as per the direction of Engineer in Charge, all complete.
158	Carriage of Stock Materials.
159	Loading and Unloading of Cement or Steel by Manual Means and Stacking.
160	Cost of Haulage Excluding Loading and Unloading. Surfaced Road
161	Carriage ofNon-Stock Materials.
162	Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum.
163	Cost of Haulage Excluding Loading and Unloading. Surfaced Road
164	Sand
165	Stone
166	Stone Chips
167	SCHEDULE OF RATES FOR SIB OFFICE AT THANGU NORTH SIKKIM.
168	Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
169	Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual Means)
170	Providing and Laying in position cement concrete of 1:2:4 grade including compacting curing etc all complete.1:2:4 mix.(1 cement, 2 coarse sand, 4 graded stone aggregate of 20mm & down size)
171	Sand filling in building works in layer not exceeding 20cum including watering, ramming etc, all complete.
172	Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 70% cleanhard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction ofEngineer in Charge.
173	Providing and Laying in position 1:1.5:3 grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.
174	Providing, fixing & removing form work for casting R.C.C items as indicated below: with local timber from inside the state)
175	Foundation, footings, base of column etc for mass concrete.
176	Beam, lintels, girders, brersumers and cantilevers.
177	Square columns
178	Floor slab, roof slab, landing, balcony and access platform.
179	Supplying, bending and placing in position tor steel reinforcement in all R.C.C works including cost of binding wires, all complete.
180	Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 course sand) including carriage of bricks up to work site, curing etc all complete.
181	Providing and Laying 20mm thick cement plaster of 1:4 mix in single coat including finishing even and smooth and curing etc all complete.
182	Providing and Laying40 mm thick 1:2:4 c.c. (1cement, 2coarse sand,4 of 12.5mm and down stone aggregate) flooring withfloating coat of neat cement to give a smooth surface in not exceeding 02 sqm. including cost of glass strips and curing etc complete in all building floors wherever specified.
183	Providing, fitting and fixing 38mm flooring in sal timber over a frame of sal timber excluding the cost of polishingand including cost of one coat priming on the base frame complete.
184	Providing / Fitting / Fixing 25mmceiling in wooden framespanisazor equivalent including frame work excluding the cost of polishing and primingall complete.
185	Providing, fitting and fixing of dressed sal timberin all types of frames complete
186	Providing, fitting and fixing water proof flush door shutters, solid block hard core construction with frame of 1st class hard timber with well matched 3mm teak ply decorative type on one faces of the shutters including hinges with screws complete.
187	Providing hold fast of (40x5)mm flat iron including fixing to frame with 10mm dia. Bolts nuts and timber plugs and embedding in CC 1:3:6 ( 1 cement, 3 coarse sand, 6 graded stone aggregate 2omm nominal size) block of size (30x10x15)cm. as per the direction of Engineer - in- Chargeall complete:
188	Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete.
189	Providing, fitting and fixing. handles 125mm size with necessary screws etc complete.
190	Providing and fixing Tower bolt 150x10mm with necessary screws etc complete.
191	Providing and applying priming coat with ready mixed pink on timber work including preparation of the surface by thoroughly cleaning and sand papering etc complete
192	Providing and painting with ready mixedpaint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface.
193	Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation inprofile dimension in higher side shall be accepted but no extra payment on this account shall be made
194	Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete:
195	Providing and Providing and painting with plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete.
196	Providing and installation of wall panelling made of Timber (Pinewood or equivalent)panel (Tongue and Groove panelling) withminimum size of 127 x 12 mm with Furring Strips as framework system with provision of wainscotting at the top and skirting and base shoe at the bottom with necessary nails, screw ,etc including varnishing on the finished surface all completeas per drawing and direction of the Engineer in-charge.
197	Providing and Laying white or colored glazed tilesanti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalentin flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
198	Providing and Laying white or colored or ceramic glazed tiles of size 200mm x 300mm Special colour(black, burgundy, pink, midnight blue, alpine blueor equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry.
199	Supplying, fabricating, fitting and fixing steel tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc as per the standard specification and design and direction of Engineer - in- Chargeall complete.
200	Providing, fitting, fixing of 24 BWG Pre-painted HULASsheet roofing with lapping of 150mm (two corrugation)with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including carriage all complete
201	Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Pre-painted HULASSheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete.
202	Providing, fitting and fixing 23cm deep 24BWG G.P. sheet eaves board including (50mmx25mm) dressed sal timber beading and M.S. Rod brackets complete.
203	Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on New surface.
204	Providing box drain of 30 cm (ht) x 45 cm (width) internal dimension with 1:2:4 Plum concrete (20mm & down) inside walls thickness of 23 cm (hill side) and 30 cm (road side)and 1:3:6 (20 mm & down) base concrete of thickness of 15 cmwith standard specification over 15 cm stone soling including providing & laying guard stones complete, as per thedirection of theEngineer in Charge.
205	Providing and laying. Chisel Dressed Stone Masonry with chisel dressed clean hard selected stone in 1:5 Cement Mortar ( 1cement, 5coarse sand) including centering, liningand curing etc as per the direction of Engineer in Charge, all complete.
206	Provision Wooden Railing in Balcony
207	Carriage of Stock Materials.
208	Loading and Unloading of Cement or Steel by Manual Means and Stacking.
209	Cost of Haulage Excluding Loading and Unloading. Surfaced Road
210	Carriage ofNon-Stock Materials.
211	Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum.
212	Cost of Haulage Excluding Loading and Unloading. Surfaced Road
213	Sand
214	Stone
215	Stone Chips
216	SCHEDULE OF RATES FOR SIB OFFICE AT THANGU NORTH SIKKIM.
217	Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
218	Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual Means)
219	Providing and Laying in position cement concrete of 1:2:4 grade including compacting curing etc all complete.1:2:4 mix.(1 cement, 2 coarse sand, 4 graded stone aggregate of 20mm & down size)
220	Sand filling in building works in layer not exceeding 20cum including watering, ramming etc, all complete.
221	Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 70% cleanhard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction ofEngineer in Charge.
222	Providing and Laying in position 1:1.5:3 grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.
223	Providing, fixing & removing form work for casting R.C.C items as indicated below: with local timber from inside the state)
224	Foundation, footings, base of column etc for mass concrete.
225	Beam, lintels, girders, brersumers and cantilevers.
226	Square columns
227	Floor slab, roof slab, landing, balcony and access platform.
228	Supplying, bending and placing in position tor steel reinforcement in all R.C.C works including cost of binding wires, all complete.
229	Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 course sand) including carriage of bricks up to work site, curing etc all complete.
230	Providing and Laying 20mm thick cement plaster of 1:4 mix in single coat including finishing even and smooth and curing etc all complete.
231	Providing and Laying40 mm thick 1:2:4 c.c. (1cement, 2coarse sand,4 of 12.5mm and down stone aggregate) flooring withfloating coat of neat cement to give a smooth surface in not exceeding 02 sqm. including cost of glass strips and curing etc complete in all building floors wherever specified.
232	Providing, fitting and fixing 38mm flooring in sal timber over a frame of sal timber excluding the cost of polishingand including cost of one coat priming on the base frame complete.
233	Providing / Fitting / Fixing 25mmceiling in wooden framespanisazor equivalent including frame work excluding the cost of polishing and primingall complete.
234	Providing, fitting and fixing of dressed sal timberin all types of frames complete
235	Providing, fitting and fixing water proof flush door shutters, solid block hard core construction with frame of 1st class hard timber with well matched 3mm teak ply decorative type on one faces of the shutters including hinges with screws complete.
236	Providing hold fast of (40x5)mm flat iron including fixing to frame with 10mm dia. Bolts nuts and timber plugs and embedding in CC 1:3:6 ( 1 cement, 3 coarse sand, 6 graded stone aggregate 2omm nominal size) block of size (30x10x15)cm. as per the direction of Engineer - in- Chargeall complete:
237	Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete.
238	Providing, fitting and fixing. handles 125mm size with necessary screws etc complete.
239	Providing and fixing Tower bolt 150x10mm with necessary screws etc complete.
240	Providing and applying priming coat with ready mixed pink on timber work including preparation of the surface by thoroughly cleaning and sand papering etc complete
241	Providing and painting with ready mixedpaint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface.
242	Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation inprofile dimension in higher side shall be accepted but no extra payment on this account shall be made
243	Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete:
244	Providing and Providing and painting with plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete.
245	Providing and installation of wall panelling made of Timber (Pinewood or equivalent)panel (Tongue and Groove panelling) withminimum size of 127 x 12 mm with Furring Strips as framework system with provision of wainscotting at the top and skirting and base shoe at the bottom with necessary nails, screw ,etc including varnishing on the finished surface all completeas per drawing and direction of the Engineer in-charge.
246	Providing and Laying white or colored glazed tilesanti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalentin flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
247	Providing and Laying white or colored or ceramic glazed tiles of size 200mm x 300mm Special colour(black, burgundy, pink, midnight blue, alpine blueor equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry.
248	Supplying, fabricating, fitting and fixing steel tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc as per the standard specification and design and direction of Engineer - in- Chargeall complete.
249	Providing, fitting, fixing of 24 BWG Pre-painted HULASsheet roofing with lapping of 150mm (two corrugation)with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including carriage all complete
250	Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Pre-painted HULASSheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete.
251	Providing, fitting and fixing 23cm deep 24BWG G.P. sheet eaves board including (50mmx25mm) dressed sal timber beading and M.S. Rod brackets complete.
252	Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on New surface.
253	Providing box drain of 30 cm (ht) x 45 cm (width) internal dimension with 1:2:4 Plum concrete (20mm & down) inside walls thickness of 23 cm (hill side) and 30 cm (road side)and 1:3:6 (20 mm & down) base concrete of thickness of 15 cmwith standard specification over 15 cm stone soling including providing & laying guard stones complete, as per thedirection of theEngineer in Charge.
254	Providing and laying. Chisel Dressed Stone Masonry with chisel dressed clean hard selected stone in 1:5 Cement Mortar ( 1cement, 5coarse sand) including centering, liningand curing etc as per the direction of Engineer in Charge, all complete.
255	Carriage of Stock Materials.
256	Loading and Unloading of Cement or Steel by Manual Means and Stacking.
257	Cost of Haulage Excluding Loading and Unloading. Surfaced Road
258	Carriage ofNon-Stock Materials.
259	Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum.
260	Cost of Haulage Excluding Loading and Unloading. Surfaced Road
261	Sand
262	Stone
263	Stone Chips
264	SITE LEVELLING AND PROTECTIVE WORK TO SIB OFFICE-CUM-RESIDENTIAL AT THANGU,NORTH SIKKIM.
265	Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 meters.Excavation in Hill Area in Soil by Manual Means
266	Earthwork in excavation in all kinds of soils in foundation trenches including dressing of all sides, watering and ramming including disposal of excavated earth up to 30m lead and lift up to 1.5m, disposed earth to be leveled and neatly dressed as per the direction of Engineer - in - charge all complete.
267	Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 70% cleanhard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction ofEngineer in Charge.
268	Providing and laying hand packed stone filling in building works with clean hard selected stones, all complete.
269	Carriage of Stock Materials
270	Loading and Unloading of Cement or Steel by Manual Means and Stacking.
271	Cost of Haulage Excluding Loading and Unloading. Surfaced Road
272	Carriage of Non- Stock Materials :-
273	Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum.
274	Cost of Haulage Excluding Loading and Unloading. Surfaced Road
275	Sand:
276	Stone:
277	Stone Chips
278	Provision for throwing of spoils
279	Loading and Unloading.
280	Cost of Haulage
281	SCHEDULE FOR BOUNDARY FENSING AT SIB OFFICE AT THANGU.
282	Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
283	Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual means)
284	Providing and Laying in position cement concrete of 1:3:6 mix. (1 cement, 3 coarse sand, 6 stone aggregate of 20mm & down size)including compacting curing etc all complete.
285	Providing and laying. coarse Rubble Stone Masonry in 1:4:8 c.c. ( 1 cement, 4 sand, 8 clean hard graded stone chips of size 40mm and down) including bond stone, through stone of size 150mm x 150mm x 450mm manufactured in 1:4:8 (1cement, 4 clean coarse sand, 8 clean hard stone aggregate of size 40 mm and down), and curing etc, complete as per the direction of Engineer in Charge excluding the cost of carriage of materials.
286	Providing and laying in position 1:1.5:3 mix ( 1 cement, 1.5 coarse sand, 3 graded stone aggregate 20mm and down nominal gauge) of reinforced cement concrete excluding the cost of formwork, finishing and reinforcement.
287	Supplying, bending and placing in positionsteel reinforcement in all R.C.C works including cost of binding wires all complete.
288	Providing, fixing & removing form work for casting R.C.C items as indicated below: with local timber from inside the state)
289	Foundation, footings, base of column etc for mass concrete.
290	Beam, lintels, girders, brersumers and cantilevers.
291	Square columns
292	Filling with available excavated earth in trenches, plinth and side of foundation in building works with layers not exceeding 20cm in depth including consolidation of each layer by ramming, watering etc all complete.
293	Mixed Filling
294	Stone Filling
295	P/L first class brick work in half brick thick in superstructure of standard size with 1:4 cm as per the direction of Engineer in charge i/c curing etc all complete.
296	Providing and laying 15mm thick cement plaster of 1:3 mix in single coat including finishing even and smooth and curing etc all complete.
297	Providing box drain of 60 cm (ht) x 45 cm (width) of internal dimension with 1:2:4 Plum concrete (40mm & down) side wall thickness of 23 cm (hill side) and 30 cm (road side) with1:3:6 (20 mm & down) base concrete of thickness of 15 cmwith standard specification over 15 cm stone soling including providing & laying guard stones, complete as per the direction of theEngineer-in-Charge.
298	Carriage of Stock Materials.
299	Loading and Unloading of Cement or Steel by Manual Means and Stacking.
300	Cost of Haulage Excluding Loading and Unloading. Surfaced Road
301	Carriage ofNon-Stock Materials.
302	Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum.
303	Cost of Haulage Excluding Loading and Unloading. Surfaced Road
304	Sand
305	Stone
306	Stone Chips
307	SCHEDULE FOR WATER SUPPLY AT SIB OFFICE THANGU
308	Providing, Fitting and fixing GI pipe of medium class,(excluding trenching, refilling, compactingandthe cost of fittings) all complete
309	40mm dia
310	32mm dia
311	Providing, Fitting and fixing PVC 32mm dia pipe complete with GI fittings and clamps including cuttings and making good the walls etc.on wallfor wash basin connector to main line
312	Provision for GI Pipe fittings (External & Internal)30% cost of GI Pipes
313	Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan European One pice (Star white) CAT NO 92008
314	Providing, fitting and fixing. white vitreous china wash angle back basin with CI brackets, painted, 15mm CP brass pillar taps, CP brass chain with rubber plug, 32mm CP brass waste pipe, lead or PVC connection 32mm dia CP \"brass cap and unions, brass stop cock, complete including cutting and making good the walls wherever required. (One wash basin with one pillar cock 35 cm x 35 cm )
315	Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL)
316	BIB COCK15 MM DIA
317	STOP COCK15 MM DIA (CONCEALED WORKS)
318	CONNECTING PIPE
319	SHOWER ROSE WITH ARM
320	BASIN MIXTURE
321	Providing and fitting pedestal white colour for Hind Vitreous wash basin all complete.
322	Providing and fitting of slandered size mirror of quality equivalent to Admiral and size 20\"x16\" complete
323	Providing & fitting chromium plated toilet paper holderincludin the making of holes and fixed to timber cleats with CP screws wahser etc. all complete.
324	Providing, fitting & fixing of chromium plated soap dish with necessary screw etc. all complete.
325	Providing, fitting and fixing towel rail of chromium plated brass complete with brackets fixed to the timber cleats, CP brass screws complete.600x20mm
326	Construction of septic tank and soak pit (the analysis is attached).
327	Providing and placing on terrace high density polyethelene water storage tank with man hole lid and suitable locking arrangement including making holes for inlet, outlet and ball cock including testing etc. all complete: (Syntex or equivalent).
328	Providing and fitting soil, waste and vent pipes including testing etc. complete.100 mmdia PRINCE/SUPREME or equivalent soil pipe.
329	Provision for Soil Pipe fittings (External & Internal)
330	Providing, Fitting and fixing gateway valve 25 mm dia brass fittings of approved quality and size all complete.
331	Providing/Fitting stainless steel kitchen sink with CI brackets, CP brass chains with rubber plugs 40 mm CP brass waste, CP brass tape etc. all complete i/c the fittings, cuttings and making good the wall wherever required.
332	SCHEDULE FOR PARKING AT SIB OFFICE THANGU
333	Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
334	Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual means)
335	Providing and Laying in position cement concrete of 1:3:6 mix. (1 cement, 3 coarse sand, 6 stone aggregate of 20mm & down size)including compacting curing etc all complete.
336	Providing and Laying Chequerstiles in on flooring over 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry.
337	Carriage of Stock Materials.
338	Loading and Unloading of Cement or Steel by Manual Means and Stacking.
339	Cost of Haulage Excluding Loading and Unloading. Surfaced Road
340	Carriage ofNon-Stock Materials.
341	Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum.
342	Cost of Haulage Excluding Loading and Unloading. Surfaced Road
343	Sand
344	Stone Chips
345	Iron Gate(Lumpsum)
346	Dismantlling of Old Structures (Lumpsum)
347	Land Scaping, Beautification & Greenery (Lumpsum)
348	Higher Altitutde Allowances for Wages
349	ELECTRIFICATION (AT PAR)

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Sikkim Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Office And Residential Quarters At Bip Thangu, North Sikkim., North Sikkim-Sikkim

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Office And Residential Quarters At Bip Thangu, North Sikkim., North Sikkim-Sikkim

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us