Tender For Repair And Installation Of Electrical Equipment At Different Sites Under Mmces2/Pwd., Paschim Medinipur-West Bengal

Tender For Repair And Installation Of Electrical Equipment At Different Sites Under Mmces2/Pwd. Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 1 Each 2 Distribution wiring in 1.1 KV single core stranded FR PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit FR (Precision make) incl. necy. fittings as required. (a) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC 30 Mtr 3 S & D of 3ft long down rod for the ceiling fan as per site requirement. 10 Each 4 Rewinding of Ceiling fan with super enameled copper wire of appropriate garge with minalex paper, mica sheet. Loop changing, heat varnisting & refitting after testing the r.p.m. (new type) incl. to & fro carrying to the Cos work shop. 50 each 5 Rewinding of 15inch Exhaust fan with super enameled copper wire of appropriate garge with minalex paper, mica sheet. Loop changing, heat varnisting & refitting after testing the r.p.m. (new type) incl. to & fro carrying to the Cos work shop. 2 Each 6 Rewinding of 12inch Exhaust fan with super enameled copper wire of appropriate garge with minalex paper, mica sheet. Loop changing, heat varnisting & refitting after testing the r.p.m. (new type) incl. to & fro carrying to the Cos work shop. 2 7 Charge for necessary serviceing, cleaning, greasing as required and changing each split pin as required with Company own tools and Tackles for safety of AC Ceiling/Exhaust Fan. 54 each 8 S & F of fan 2.5MFD condenser with holder if required. 50 each 9 S & F of Ball bearing in the place of defective ones. (TATA - SKF) a) TATA/SKF 6201 / b) TATA/SKF 6203 / c) TATA/SKF 6202 as required 100 each 10 Supply & Delivery of following size 1.1 kv.gr.XLPE insulated 1100V Grade as per IS 7098 (part 1) 1988 armoured sheathed Aluminium conductor cable. [Make - Polycab /Havells/Gloster/Mescab] (a) 4 core 10sqmm 20 Mtr 11 Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting 20 Mtr 12 Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : (a) 4 core 10 sqmm 6 Each 13 Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : (a) 4 core 10 sqmm 6 Set ISSUED TO: SPECIFICATION Name of the Work : Repair and Installation of Electrical Equipment at Different Sites under MMCES2/PWD. N.I.Q. No.: MMCESD/NIQ-15 of 2025-26 JOB NO.: MC/RW/55 of 2025-26 Page 1 of 1 SL NO DESCRIPTION OF ITEM QTY UNIT RATE (₹) AMOUNT (₹) 14 Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works (a) 200 mm x 150 mm x 65 mm 2 Each 15 Charges for re-fixing the loosened switchboard, including the vertical run of polythene pipe for existing wiring as per direction of EIC. 1 Job 16 S&F of 2.5μF Tribcon make fan capacitor. 100 Each 17 Supply & fixing 250 volt. 4 Ft. Long LED tube fittings with LED tube complete with all accessories direct on wall with Z clamp (Make-Philips or equivalent to wipro/crompton Make).- (i) TMC 501P 1xT-LED 22W P3241 with 01 nos Polycarbonate MAS LEDtube 1200mm 18W865 T8 I – 2100lm / Crompton, Cat no IGP161LT8-16 1xT8 with 01 nos tube cat no.- LT8-20-865-(2) 20 Each 18 Supply & Delivery of 450 mm Tornado II Stand-P/C Blk Guard fan as per direction of EIC. 1 Each 19 Supply & Fixing 240 V, 25A Modular switch type DP MCB (CCurve) (Brand approved by EIC) on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 1 Each 20 Supplying & Fixing Industrial Plug & Socket board with 240 V, 32A, SPN & Earth Metal Industrial Plug socket & 32A Industrial top incl. S&F 32 A DP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection. 1 Each 21 Supplying and Drawing 1.1 KV single core stranded FR PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

Refer document

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB