|
| 1 | Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc., complete as specified and directed. |
| 2 | M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:6 finished the plaster surfaces fair and even, complete all as specified and directed. |
| 3 | All as per item No 2.00 here inbefore but in cm 1:4 (external surfaces)with water proofing treatment compound, complete all as specified and directed. |
| 4 | M&L for Brickwork with subclass ‘B’ bricks, straight orcurved on plan exc 6m IN CEMENT MORTAR 1:6 meanradius built including demolition of old brick work, complete all as specified and directed. |
| 5 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each, complete all as specified and directed. |
| 6 | M & L forexterior grade coloured ceramic tiles in vertical surface as in skirting & dado, 7 to 8 mm thick area exc 0.06 Sqm but n.exc 0.18 Sqm over and including 10 mm thick rendering in CM1:4set & jointed in neat cement slurry & pointed in coloured cement to match and including Dismantling of existingfloor, hearth or wall tiling, complete all as specified and directed. |
| 7 | M&L for repairs 8 mm thick toughned glass with colour itching fixed with stainless steel brackets as in fixed windows of required size and shape, as directed by Engineer- in-charge. |
| 8 | M&L in repairs 12 mm thick toughned glass with colour itching fixed with stainless steel and with all connected accessories such as door hinges floor machines lock arrangement and all neccesary fitting to assemble a door with SS brackets, as directed by Engineer-in-Charge. |
| 9 | S&F in repairs 12 mm thick automatic door including all sensors with electronic and mechanical machines for smooth functioning of doors including all connected accessories, all as specified and directed by Engineer- in-charge. (toughned glass to be paid seperately). |
| 10 | M&L in repairs 8 mm thick toughned glass fixed with stainless steel brackets, as directed by Engineer- in-charge. |
| 11 | M&L for textured paint on wall as described under from serial no ( i to iv ) :-(i) Prepearing the existing surface/ newly plastered surface by scrapping the existing treatment/ paint properly, as instructed by Engineer-in-Charge.(ii) Then apply a layer of apex createx scratch finish( 5 mm ) evenly on the surface from the approved applicator, as instructed by Engineer-in-Charge.(iii) After applying the putty on the surface a uniform primer from the approved manufacturer and approved applicator is applied uniformly on the surface, as instructed by Engineer-in-Charge.(iv) After applying primer uniformly on the surface three coat of oil bound distemper(ROMAN STONE 8311) is to be applied uniformly on the surface, as instructed by Engineer-in-Charge. |
| 12 | S&F in repairs high quality polished/ brushedstainless steel letter of desired shape and colour and size mounted on studs/ acrylic sheet with backlit, all as specified and directed by Engineer-in-Charge. |
| 13 | S&F in repairs high quality polished/ brushedstainless steel letter of desired shape and colour and size mounted on studs without backlit, all as specified and directed by Engineer-in-Charge. |
| 14 | Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh will be included in the same item) including dismantling of existing ceilling, complete all as specified and directed. |
| 15 | Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to curved surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh will be paid in the same item)including dismantling of existing ceilling, complete all as specified and directed. |
| 16 | Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface on any sunk or raised mouldingover 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh will be paid in the same item) including dismantling of existing ceilling, complete all as specified and directed. |
| 17 | M&L for plaster of paris moulding/ cornices of desired shape and width, as directed by Engr-in-Charge. |
| 18 | S&F in repairs high quality stainless steel sheet with finest brass painting of desired thickness and size, complete all as specified and directed. |
| 19 | M&L in repair Granite (of any type of coloured) work (table rubbed and polished) 15-20 mm thick in steps jambs,pillars, window cills, cooking plateform /partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:6 incl moulding, chamfering of edges, complete all as specified and directed. |
| 20 | M&L in repairs udaipur green of 12-14 mm thick in steps jambs,pillars, window cills, cooking plateform /partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble over 15mm thick screed bed in CM 1:6 incl moulding, chamfering of edges complete and dismantling of existing old stone slab, as spd and directed by Engr-in-Charge. |
| 21 | Preparation of old plasteredsurfaces by complete removal of existing treatment and applying two coat of oil bound distemper over and including a layer of wall care putty (average thickness 1 mm), complete all as specified and directed. |
| 22 | M&L for 1st class hardwood Plain, solid, straight chowkats and frames, panelling, wrought, framed rebated on the solid, rounded or chamfered , put together with glue pinned at joints segmental worked from the solid, supplied and fixed, complete all as specified and directed. |
| 23 | M&L forFrench polishing on surfaces of any descriptionwidth or girth including cleaning and preparing thesurface including a coat of wood filler on new works with two or more coats, complete all as specified and directed. |
| 24 | Material & Labour in repairs for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed. |
| 25 | S&F in repairs18 mm thick HDHMR BOARD and over which 1.5 mm PVC MICA with adhesive for shelves including all necessary fixtures, complete all as specified and directed. |
| 26 | S&F in repairs rolled mild steel section as in main and cross beams hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165, complete all as specified and directed. |
| 27 | M&L for applying three coat of brass finish paint over a layer of primer, all as specified and directed by Engr-in-Charge. |
| 28 | M&L for two coats of exterior emulsion paint (weather coatof Berger or equivelent ) over a coat of primer over a thin layer of external wall putty to achive a smooth finish surface overnewly plastered surface of wall, complete all as specified and directed. |
| 29 | M&L for two coats of exterior emulsion paint (weather coatof Berger or equivelent ) over a coat of primer over a thin layer of external wall putty to achive a smooth finish surface after complete removal of existing treatement, complete all as specified and as directed. |
| 30 | Dismantling of old boarding, complete all as specified and directed. |
| 31 | M&L for polishing of existing green marble with high grade mirror polish including filling all the gaps between the existing green marbles, all as spd and directed by Engr-in-Charge. |
| 32 | S&F of 3mm thick glass for fixing in cupboard with high grage stainless steel hinges and all the connected accessories all as spd and directed by Engr-in-Charge. |
| 33 | S&F of brass coated PVC strip of required shape, size and thickness fixed on wall using adhesive or any other arrangment, all as spd and directed by Engr-in-Charge. |
| 34 | Supply and fixing factory made uPVC white colour fixed glazed ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at allcorners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 35 | M&L for concealed point wiring on wall and surface wiring on ceiling/roof with necessary arrangements with 1.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor with andincluding PVC concealed conduit of medium grade with all fittingsincluding Modular metal flush box minimum 1.6 mm thick, Modular white cover plate with frame, of required module at site, fixed with chromium plated screws and washers for switches and sockets, including 1.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dollyand including cutting chases in walls / floors for concealed conduitandmaking good disturbed surfaces area by cement mortar (1:3) and to match with the existing surface/colour by using existing oil bound distemper/white wash complete all as specified and directed for the following:-Note: - Cutting chase to wall wherever required shall be included in the rate quoted for point wiring. |
| 36 | (a) One light, fan, bell point controlled by one switch. |
| 37 | (b) One 3 pin switch socket outlet point 5 Amps on same board with other switch. |
| 38 | All as per item No 35.01 here inbefore but with 2.5 sqmm copper conductor cable for One 5 Amps socket outlet on independent board. |
| 39 | All as per item No 35.02 here inbefore but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 Sqmm size. |
| 40 | M&L for Modular switch 1 way 6A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge. |
| 41 | Supply and fixing Modular socket outlet 2 in 1, 5 pin, 6 Amps flush type white finish, complete all as specifiedand as directed. |
| 42 | M&L for Modular socket outlet 2 in 1, 6 pins 6A and 16A, combined 2 module, complete all as specified and directed by Engineer in charge. |
| 43 | M&L for Modular switch 1 way 16A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge. |
| 44 | S & F in ceiling rose surface backlite 65x50mm 3 terminals, complete all as specifiedand as directed. |
| 45 | Supply and fixing of LED down light (round) 6W, 220V, AC decorative type with 100lm/watt including LED light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specifiedand as directed. |
| 46 | Supply and fixing of LED down light (round) 9W, 220V, AC decorative type with 100lm/watt including LED light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specifiedand as directed. |
| 47 | Supply and fixing of LED down light (round) 12W, 220V, AC decorative type with 100lm/watt including LED light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specifiedand as directed. |
| 48 | Supply and fixing of LED down light (square) 6W, 220V, AC decorative type with 100lm/watt and 6500K including LED light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specifiedand as directed. |
| 49 | Supply and fixingofLED down light (square) 9W, 220V, AC decorative type with 100lm/watt and 6500K including LED light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specifiedand as directed. |
| 50 | Supply and fixing of LED down light (square) 12W, 220V, AC decorative type with 100lm/watt and 6500K including LED light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specifiedand as directed. |
| 51 | Supply and fixing of 18W, 220V, AC chrome reflector LED ceiling round spot light colour temp 6500K,IP65 protection including LED light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specifiedand as directed. |
| 52 | Supply and fixing of 12W, 220V, LED picture light colour temp 4000K,IP65 protection including LED light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specifiedand as directed. |
| 53 | Supply and fixing of LED panel light 600x600mm 28 Watt ,140lm/w CRI 80 colour temp 4000K,IP65 protection including LED light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specifiedand as directed. |
| 54 | Supply and fixing of LED rope light IP 65 high brightness colour temp 3000K,IP65 protection including LED light lengh 50RM connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specifiedand as directed. |
| 55 | Supply and fixing of LED strek traking light 30 watt colour temp 4000K,IP65 protection including LED light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. |
| 56 | Supply and fixing LED step light 5 watt colour temp 3000K,IP65 protection including LED light connection with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 57 | Supply and fixing of LED surface mountedCOD light 12 watt colour temp 3000K,IP65 protection including LED light connection with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specifiedand as directed. |
| 58 | Supply and fixing of LEDbulb 3 watt lumen capacity 105 lumen bright white colour of suitable size of holder, complete all as specifiedand as directed. |
| 59 | Supply and fixing factory made epoxy powder coated distribution board TPN 04 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, stranded DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts, complete all as specified & directed. |
| 60 | Supply and fixing of factory made epoxy powder coated distribution board SPN 08 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, stranded DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts, complete all as specified & directed. |
| 61 | Supply and fixing of MCB single pole 240 volt \"C\" curve 10 KA 5 to 32 Amps capacity all as specified and directed incl taking down old one. |
| 62 | Supply and fixing of MCB single pole & neutral 240 volt \"C\" curve 10 KA 25 to 32Amps complete all as specified and directed. |
| 63 | Supply and fixing of MCB triple pole & neutral 240 volt \"C\" curve 10 KA 40 to 100Amps complete all as specified and directed. |
| 64 | MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA, complete all as specifiedand as directed. |
| 65 | M&L for concealed sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 6.0 Sqmm of voltage rating up to and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 6.0 Sqmm (green colour) as earth continuity conductor, all as specified and directed. (Note : Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit) |
| 66 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core, complete all as specifiedand as directed. |
| 67 | Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. |
