Tender For Defunct Electric Works At Emrs Saliaanantnag -- 1 Wiring for damaged/burnt/new circuits with FRLSPVC insulated 660/1100 volt grade flexible stranded copper conductor wiresin recessed or surface conduiting system, excluding cost of conduits. (Havells/ Polycab/ SSK/ Anchor/KEI/RR or equivalent). 2 2x 2.5 sq mm 3 2x1.5 sq mm 4 Wiring forlight/power plug points (15/16A heating points) with 2x4 sq mm FRLSPVC insulated flexible stranded copper conductor wires in surface/recessedmedium class PVC conduit along with 1x4 sq. mm FRLSPVC insulated copper conductor single core cable forearthing, etc. as required.(Havells/ Polycab/ Anchor/ SSK/KEI/RR or equivalent) including the cost of conduit.The faulty material should be handed to the intending department.The job includes making the surface same as before. 5 Wiring for5-10A Socket out lets for computer with 2X2.5 sq. mm FRLS PVC insulated flexible stranded copper conductor (Havells/Polycab/SSK/Anchor/KEI/RR or equivalent as directed by engineer incharge.) wires in surface/recessedmedium class PVC conduit alongwith 1 No. 2.5 sq mm FRLS PVC insulated copper conductor single core cable for earthing etc. as required including the cost of conduit.The faulty material should be handed to the intending department.The job includes making the surface same as before. 6 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3/6 pin 15/16A shutter type modular socket outlet and15/16A modular switch connections etc. as required.(Anchor roma plus/Legrand Mylinc/SSK/Schneider Zencelo /Crabtree athena/eq. make).The faulty material should be handed to the intending department. 7 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3/5 pin 5/6 A modular socket outlet and 5/6A modular switch including connections etc. as required.(Anchor roma plus/Legrand Mylinc /SSK/Schneider Zencelo /Crabtree athena/ eq. make).The faulty material should be handed to the intending department. 8 Supplying and fixing ofindicators on existing modular plate and switch box , incl. connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or equivalent). 9 Repairing and Fixing of existing 8M, 6M, 4M modular plates including switches and sockets.The job also includes recessing for proper fixing of modular plates.Complete Job.The faulty material should be handed to the intending department 10 Supply, Installation, Testing and Commissioning of 100W (Havells/ PhillIps/Wipro skyline/ eq. make ) on existing brackets with new generation energy saving and environmental friendly long life L.E.D street light made up of pressure die cast Aluminum housing with high efficiency LEDs as lighting source with efficacy >100lm/w ,CRI>80 ,CCT>5000 ,Avg Life L70 50000 hours ,No haremful UV and IR radiators, Operating Temp -10 to 45C ,Surge Voltage Protection, IP66Protection and impact resistance of IK07 on existing brackets present on poles. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. Complete Job. 11 Supply, Installation, Testing and Commissioning of 15 Watt LED recessed/mounted (round or square) Down lighters having aluminum body, minimum 100 lm/w, average life 50000 hours, Operating temperature -10°C to +45°C in place of damaged 12/15 W recessed/mounted LED lights. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/ Philips/ Crompton/ Jaguar/Wipro).Sample to be got approved by EIC.The faulty material should be handed to the intending department 12 Supply, Installation, Testing and Commissioning of 1200 mm sweep ceiling fan single star with3 No. Aluminium blades, reqd. long down rod, 2nos. canopies,safety cable, shackle kit,Power Factor not less than 0.9, 45-54W, Air flow 7200-7500cfm, RPM>340, Service Valueincluding safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, and including iron hook complete job.The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending departm (USHA/Havells/Crompton/Phillips/bajaj or eq.) as directed by engineer incharge. 13 Supply, Installation, Testing and Commissioning of PVC batten / angle holder with 12WLED bulb, incl. cost of base block/ base plate in place of damaged 12/15 W surface/recessed LED lights in Boys and Girls Hostel. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/ Philips/ Crompton/ Jaguar/Wipro).Sample to be got approved by EIC.The faulty material should be handed to the intending department. 14 Supply, Installation, Testing and Commissioning of Pendant lamp, ceiling mount, portable, including lamp 10-18W (hanging) for Principal office. Material should be metallic.The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department.Sample to be got approved by EIC.Complete job. The faulty material should be handed to the intending department. 15 Supply, Installation, Testing and Commissioning of mcb distribution box (pole box) consisting of 5A SP MCB, 32A Connector of standard make, ISI marked , attached with the pole.(Legrand/ Havells/L&T/Schneider) incl. all reqd. connections.Complete Job. The faulty material should be handed to the intending department. 16 Supply, Installation, Testing and Commissioning of 5-32A single pole rating 240/415V, 10 KA C curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections. 17 Supply, Installation, Testing and Commissioning of 400A TPN MCCB having 36KA breaking capacity of standard make, ISI marked including making of necessary connections. (Legrand/Havells/Schneider/L&T/ABB/Simens/Indo Asian/ eq. make) (adjustable type thermo magnetics) in the existing Main Panel near 100KVA Substation complete with necessary connections.Sample to be got approved by EIC. 18 Panel Near Substaion For Busbar Chamber 19 Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel , floor/wall mounted, vermin and dust proof, outdoortype with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears, , Aluminium Bus Bar of various ratings after taking Derating factor into account,and other allied accessories etc. as required.( As per approved design,size may vary as per site requirement) 20 400A AL Busbar 01 Set(Havells/ABB/L&T/Schnider/ eq. make) 21 SUB PANEL FOR STREET LIGHTS NEAR SUBSTATIONSupply, Installation, Testing and Commissioning of Floor mounted compartmentalized,main distribution panels, fabricated out of 16 gauge sheet steel, dust protected, painted, incl. earth terminal with all necessary accessories with internal wiring as required.The panel is to be provided with the following adjustable type controlling/ protection switch gear devices:160A 4P TPN MCCB 25KA 01 No.200A TPN AL Bus Bar 01 set.Sample to be got approved by EIC.The products used inside panel should be of standard quality (L&T/Havells/Schneider/ABB/ eq. make) as directed by the engineer incharge. 22 Panel Near DG SET For Busbar Chamber 23 Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel , floor/wall mounted, vermin and dust proof, outdoortype with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears, , Aluminium Bus Bar of various ratings after taking Derating factor into account,and other allied accessories etc. as required.( As per approved design,size may vary as per site requirement) 24 400A AL Busbar 01 Set(Havells/ABB/L&T/Schnider/ eq. make to be approved by EIC) 25 Circuit Wiring for Street Lights from connector placed in pole box at pole to light. Wire should be FRLSPVC insulated 660/1100 volt grade flexible stranded copper (Havells/ Polycab/ SSK/ Anchor/KEI/RR or equivalent). 26 2x1.5 sq mm 27 Supply, laying, connecting and commissioning of 25 sq mm 3.5 core XLPE/ PVC Insulated and steel armoured 1.1 KV grade Aluminum LT cableof Havells or equ. make for Service Line from DG set to Main Panel in School Block, incl. cost of required al. thimbles duly crimped. (Over head/ under ground) Complete Job.Sample to be got approved by EIC. 28 Supply, laying, connecting and commissioning of 25 sq mm 3.5 core XLPE/ PVC Insulated and steel armoured 1.1 KV grade Aluminum LT cableof Havells or equ. make for Service Line from DG set to Main Panel in Girls Hostel, incl. cost of required al. thimbles duly crimped. (Over head/ under ground) Complete Job.Sample to be got approved by EIC. 29 Supply, laying, connecting and commissioning of 25 sq mm 3.5 core XLPE/ PVC Insulated and steel armoured 1.1 KV grade Aluminum LT cableof Havells or equ. make for Service Line from DG set to Main Panel in Boys Hostel, incl. cost of required al. thimbles duly crimped. (Over head/ under ground) Complete Job.Sample to be got approved by EIC. 30 Supply, laying, connecting and commissioning of 25 sq mm 2 core XLPE/ PVC Insulated and steel armored 1.1 KV grade Aluminum LT cableof Havells or equ. make for Street Lights from Sub Panel placed near100KVA Sub station, incl. cost of required al. thimbles duly crimped. (Over head/ under ground).Complete Job.Sample to be got approved by EIC.The faulty material should be handed to the intending department. 31 Supply, laying, connecting and commissioning of 35 sq mm 4 core XLPE/ PVC Insulated and steel armored 1.1 KV grade Aluminum LT cableof Havells or equ. make for Service Line from Substation to Main Panel in Boys Hostel, incl. cost of required al. thimbles duly crimped . (Over head/ under ground) Complete Job.Sample to be got approved by EIC. 32 Supply, laying, connecting and commissioning of 50 sq mm 4 core XLPE/ PVC Insulated and steel armored 1.1 KV grade Aluminum LT cableof Havells or equ. make for Service Connection at Substation from MCCB to Busbar incl. cost of required al. thimbles duly crimped.Complete Job.Sample to be got approved by EIC. 33 Supply, laying, connecting and commissioning of 10 sq mm 4 core XLPE/ PVC Insulated unarmored 1.1 KV grade Aluminum LT cableof Havells or equ. make for Service Connection at at boys and girls hostel from main panel to sub panel incl. cost of required al. thimbles duly crimped.Complete Job.Sample to be got approved by EIC. 34 Supply, laying, connecting and commissioning of 35 sq mm 4 core XLPE/ PVC isulated and steel armored 1.1 KV grade Aluminum LT cable of Havells or equ. make for Service Line from Substation to Main Panel in Girls Hostel, incl. cost of required al. thimbles duly crimped . (Over head/ under ground) Complete Job.Sample to be got approved by EIC. 35 Supply and fixing of 25 mm dia. Medium grade PVC conduit including its allied accessories like bends and concealed deeps/saddles etc for laying of wires, fixed with necessary clips and rowel plugs complete job. 36 Earth work in excavation by manualmeans in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: 37 Servicing, overhauling, testing and commissioning of existing 100 kVA, 3-phase diesel generator set, which has been lying idle for more than 3 years. The scope of work includes:•Thorough inspection of DG set, alternator, control panel, fuel system, and cooling system.•Draining of old engine oil, flushing, and replacement with new recommended grade engine oil.•Replacement of oil filter, fuel filter, air filter, and lubricants as per OEM standards.•Cleaning of radiator, checking of coolant, hoses, and belts; topping up with fresh coolant.•Checking and servicing of battery, terminals, and charging system; replacement of electrolyte if required.•Cleaning of fuel tank, fuel lines, and ensuring proper fuel flow without blockages.•Checking and testing of electrical wiring, control relays, MCCB/ACB, bus bar connections, and safety interlocks.•Trial run of DG set at no-load and full load conditions, checking voltage, frequency, and load-sharing parameters.•Rectification of any abnormalities and making the DG set fully operational.•Final commissioning of DG set with load test and handing over in complete working condition.
