Tender For Construction Work Of Study Centre And Digital Library In Nagar Panchayat Purdilnagar - Excavation in foundation in ordinary soil (Loam, Clay or sand) including lift up to 1.50m and lead up to 30as per as per s.i.no.251 2 Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by Engineer-In-Chargewithin a distance of 60 meters (200 feet). Sor 692 3 Anti-Termite Treatment of the bottom andsides of excavation @ 5 litres/sqm of surfacearea with chemical emulsion withchlorpyriphos/ Lindane E.C. 20% with 1%concentration as DSR no. 2.35 4 Providing and laying cement concrete in 1:4:8 (1cement , 4C/sand 8 s/ballast in 40mm) and curing complete i/c cost of form work in foundation and floor as per PWD s.i.no.275a ch-5 5 Brick work with common burnt clay FPS non modular brick of class designation-100 in foundation and plinth in 1:4 cement, c/sand Sor 6.1.1 6 Excavating, supplying and filling of local earth by mechanical transport upto a lead upto 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. S.I.No. 8 DSR No. 2.25(a) 7 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets,columns, pillars, piers,abutments, posts and struts etc. including cost of centering, shuttering, finishing and excludingreinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) DSR 5.2.2 i upto plinth 8 Brick work with common burnt clay FPS non modular brick of class designation-100 in superstructure aboveplinth level in 1:4 cement,c/sand Sor 6.4.1 9 RCC work in beam , lintels, suspended floors, roofs, having balconies, shelves, chajjas,bands, staircases, above plinth level upto floor five level,i/c the cost of centering, shuttering, finishing and excluding reinforcement -1:1.5:3cement,coarse sand and stone aggregate 20 mm nominal sizei/c all as per dsr no.5.3 sr 8 ch- 05 10 Steel reinforcement for RCC work i/c straightening, cutting, bending all complete as DSR no.-5.22.6 CH-10 11 Cover block for rcc work.on MR 12 12 mm cement plaster on brick work with cement mortar 1:4 (1cement:4 coarse ) (SOR 13.4.1) 13 15 mm cement plaster on rough side brick work with cement mortar 1:4 (1cement:4 coarse ) (SOR 2 new ii) 14 6mm plaster on ceiling including chipping of CC/RCCsurface before plastering in cement mortar of mix 1:3 (1cement : 3 Fine sand) (Not Less than in 1.25 FM)(SOR 13.16.1 15 Providing and fixing false ceiling at all height includingproviding and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277)(SOR 12.45.1 16 Providing and laying brick coba 12mm thick laid with M-100 class brick bat coba 7.50cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreding cement slurry i/c all (SOR 7new) 17 Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete i/c cost of all material, labour T&P etc complete required for proper completion of the work as per DSR no.13.80 ch-15 18 Finishing walls with Acrylic Smooth exterior paint (Apex) of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied@ 2.20 kg/10 sqm)DSR no.13.46.1 19 Steel wok in built up tubular (round,square or rectangular hollow tubes etc.) truses etc. including cutting. Hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (Hot finised welded type tubes. as DSR no. 10.16.1 20 Painting on Steel/G.S. sheet with synthetic enamel paint .as DSR no. 13.53.1 21 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing ofsteps etc. complete i/c all as DSR no. 11.3.1 b 40mm 22 Making grooves 10 to 12mm wide × 8mm deep in plaster of the wall or in ceiling vertically or orizontally as required. As pwd si no. 598(1) 23 Making drip course in sunshade or FACIA as per direction as Engineer-In-Charge As pwd si no. 598(2) 24 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 TypeA, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,s.i no. 12.41.2 25 Providing and laying vitrified floor tiles etc., complete. DSR no.11.41.4ii 26 S/F 6mm thick china whiteglazed tile on wall laid with 1:3 cement c/sandi/c all complete as per PWD s.i. no.628ch-14 27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand)and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete dsr 11.27 28 Providing and fixing red sand stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixtureof pigment , matching the stone shade, jali slab without any chamfers etc. dsr 7.33.1 PWD SR. 3 29 Construction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mountedgrader on prepared surface mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. 30 Providing and laying Interlocking C.C. Tiles 80mm thick of approved quality over 25mm thick local sand. (Rubber Moulded) S.I.No. 11 Page No. 71 31 Supply and fixingof precast cement concrete sitting benchi/c all material labour T&P and grauting in cement concrete worketc. complete 32 P/F polyster window curtain i/c all 33 P/A of painting and letter writing work i/c all 34 P/F signboard ofblack granite plate in Brick masonary in Cement mortar i/c all complete 35 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required as per s.i.no. 1 ch-24 36 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required all as per s.i.no. 2ch-24 37 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. 15 mm nominal bore as DSR no. 18.49.1 38 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:as DSR no. 17.7.4 d ch 22 39 PVC connection pipe 450 mm long 15 mm dia as per s.i no.138 ch-21 40 CP brass waste jali as per s.i no.136bch-21 41 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 as DSR no. 18.53.1 42 P/F CPVC pipes having thermal stability for hot & cold water supply I/C jointing of pipe and cutting chases and making good as per s.i.no.8b ch-23 43 P/F CPVC pipes having thermal stability for hot & cold water supply as per s.i.no.8 C ch-23 Internal work 44 Supply and hoisting of sintex or equivalent high density polyethylene seamless of piece moulded tanks i/c all as si no-2 ch-19 45 Brass ball cock complete with ball and rod as per s.i no.128 ch-21 46 Providing and fixing 110 mm pvc pipe si no. 32 iii 47 G.I. flush pipe and C.P. brass spreader including C.P.connecting pipe Range of four lipped urinals DSR no. 17.4.2 48 installation of 1.50hp summer 49 Ro water cooler 50 Providing of Saraca indica as code no. 7.8 p. 167 51 IProviding & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling thesurface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of officer in charge. as DSR code no. 2.34 page-89 52 supply and fixing hexagonal /round GP fan boxwith ms bar as schedule item no. 1149 53 P/f of Wiring point with 1.5 sq mm FRLSH PVC insulated multistrand single core copper conductor cable in pvc conduit with 14 swg copper earth continuity wire GP box, piano type switch and ceiling rose holder on and earthing point 54 Light/fan/exhaust point as item. 1.8.3 group c 55 Wiring for light/power plugwith FRLSH PVC insulated multistrand single core copper conductor cable in pvc conduit with 4sq. earth continuity wire required 56 a. 2×4sq.mmas code no.1.12 57 b. 2×6sq.mmas code no.1.14.4 58 c. 2×10sq.mmas code no.1.14.5 59 Supply and fixing of LED tube light batten fitting 1×22 watt as schedule item no. 1413A 60 S/f of ceiling fan 1200mm of approved quality as code no. 19.1 61 S/f of exhaust fan of approved quality 62 Supply and fixing of mcb distibution board as code no.2.4.2 63 Supply and fixing of 5 to 32 Amp MCB (10kA) CAT A as code no. 2.10.1 64 Supply and fixing of 40Amp RCCB (10kA)as code no. 2.14.2 65 16 amp switch as code no. 1.23.3 66 6 pin 16 amp socket as code no. 1.23.5 67 S/M aluminium lugsas code no. 9.1.1 68 S/F of solar light of 20watt with pole and sensor 69 Earthing with G.I. earth pipe 4.5m long and 40mm dia i/c accessories and masonary work with cover plate with charcoal and salt requiredas code no. 5.2 70 Supply, installation, testing and commissioning of heat detector operating at 55/570 C i/c allas code no. 17.1.1 71 Supply, installation, testing and commissioning of smokedetector i/c allas code no. 17.1.2 72 Supply, installation, testing and commissioning of alarm sounderi/c allas code no. 17.1.6 73 Supply, installation, testing and commissioning of electric driver tarrace pump for automic operation i/c all as code no. 18.4.1 74 Designing Supply, installation, testing and commissioning of system control operation of ectric fire pump i/c all as code no. 18.5.2 75 Providinglaying, testing and commissioning of C class heavy duty ms pipei/c allas code no. 18.7.3 40mm 76 Providinglaying, testing and commissioning of butterfly valve i/c allas code no. 18.11.1 40mm 77 s/f first aid hose reel with thermoplastic hose i/c allas code no. 18.17.240mm 78 P/f of fire extinguisher cylinder i/c all 79 Inverter with 8 batteries 80 computer/digital table with partition 81 Reading desk with partition 82 Reception/executivechair 83 Sitting Chairs 84 table for guard room 85 Reception/executive desk 86 Newspaperdesk 87 Library steelbookcases 88 Almira 89 Wall Mount Split AC 90 Stablizer for Split AC 91 acer Intel Core i7 12700 16 GB/ 1000 GB HDD/ Windows 11 Professional 92 1 KVA UPS 93 Supply, installation, testing of IP BASED CCTVsystem i/c display, recording system on MR 94 Supply, installation, testing of internet connectivity system all equipment with 12month connectivity based on market rates of various service providers like JIO, Airtel. 12month
