Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | 40mm thick 1:2:4 plain cement concrete floor (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement. |
| 2 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). . Size of Tile 1000x1000 mm |
| 3 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 800x800 mm |
| 4 | Providing & fixing 18mm thick gang saw cut mirror polished machine cut for kitchen plateforms vanity counter, window Sills, facias and simlar location of requried size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 with joints treated with white cement, mixed with matching pigment epoxy tourch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete in all levels. |
| 5 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade pigment using white cement |
| 6 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 7 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm |
| 8 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance 11mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer\"s specification and direction of Engineerin charge Extruded section profile size 48x40 mm (DSR-9.117.1) |
| 9 | Providing and fixing factory made uPVC white colour casement/Casement cum fixed glazed door comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel g section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm) (DSR-9.147C.2) |
| 10 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded (DS profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel 9.147 section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm, sash 67 x 80 mm, & mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm). (DSR- 9.147A.3) |
| 11 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :Float glass panes 6.0 mm thick glass |
| 12 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment. |
| 13 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge With stainless steel cover plate minimum 1.25 mm thickness. |
| 14 | Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 15 | Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-incharge Anodized (AC 15 ) aluminium. |
| 16 | Providing & fixing in position collapsible steel shutters with vertical channels 20X1.0 with top and bottom rails of T iron 40X40X6, with 38mm dia steel pulleys with bolts nuts, loking arangment, stoppers handles complete applying a priming coat of approved red lead paint. |
| 17 | Painting or varnishing work in small areas or new wood work with one coat upto one square metre of ready mixed priming paint and one coat of approed superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should fonfirm. |
| 18 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 19 | Providing and fixing tiled false ceiling of specified materials of size 95x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" tunner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm andsecondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit . |
| 20 | Providing and laying \"Brick coba\" 12mm thick laid with M.150 class brik bat coba 7.50cm. Thick with gap of 15mm to each other. Over 20mm. Thick base of cement morter 1:4 cement and corse sand mixed with water proofing compound filed gaps of coba & top of coba mortar mixed with water proofing compoond in 1:4 cement & coarse & mortar finished smooth & top mashed flase square 30cmX30cm. & side wall parapet shall be mono tythic plaster wall up to 30cm. higher & junction & corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finishing mixed with acetic water proofing compound @ 2% by weight & including S/O all materials, Labour, T&P etc. com. for proper completion . |
| 21 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.. |
| 22 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm diameter. |
| 23 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm. |
| 24 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Bend 87.5, 110mm. |
| 25 | Drain along Apron |
| 26 | Supply And Filling of cinder in sunken Portion |
| 27 | Plumbing Work |
| 28 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fitting and fixtures completed including cutting and making good the walls and floors wherever required. |
| 29 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device handle lever), conforming to IS : 7231, with allfittings and fixtures complete, includingcutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid |
| 30 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 510x1040 mm bowl depth 250 mm |
| 31 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 32 | Providing & fixing white viterous china wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standardpattern, including painting of fitting and brackets, cutting & making good the walls wherever required . |
| 33 | Flat back Wash Basin size 550X400 mm with single 15mm C. P. brass pillar tap |
| 34 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. |
| 35 | 32 mm dia (for wash basin) |
| 36 | 40 mm dia(for sink and urinal) |
| 37 | Providing & Fixing 600 X 450 mm bevelled edge mirror of superiorglass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 38 | Providing & fixing viterous china toilet paper holder. |
| 39 | SOIL , WASTE, VENT AND RAIN WATER PIPES AND FITTINGS (Sand Cast Iron) |
| 40 | The following items include providing, fixing and testing in position of ISI marked (IS : 1729) sand cast iron soil, waste, vent and rain water pipes and fittings cut to required lengths, fixing at wall, ceiling or on floor including connections to all required fittings complete in all respects. |
| 41 | Providing & fixing pipes. |
| 42 | 100mm dia sand cast iron S & S Pipe |
| 43 | 75mm dia sand cast iron S & S pipe |
| 44 | Providing lead Caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fittings of diameters. |
| 45 | 100 mm |
| 46 | 75 mm |
| 47 | Providing & fixing M. S. holder - bat clamps of approved design tosand Cast iron/cast iron (spun) pipe embedded in & including cement concrete blocks 10*10*10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size). Including cost of cutting holes&making good the walls etc. |
| 48 | For 100 mm dia pipe |
| 49 | Providing & fixing sand cast iron S&S trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting & making good the walls and floors. |
| 50 | 100 mm inlet&75 mm outlet |
| 51 | Providing & fixing Sand Cast iron S & S coller |
| 52 | 100 mm dia |
| 53 | 75 mm dia |
| 54 | Providing & fixing sand cast iron S & S bend of required degree with access door insertion rubber washer 3 mm thick, bolts & nuts complete . |
| 55 | 100 mm dia |
| 56 | Providing & fixing plain sand cast iron S & S Bend of required degree. |
| 57 | 75 mm dia |
| 58 | Providing & fixing heel restsandcast iron S & S sanitary Bend. |
| 59 | 100 mm dia |
| 60 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. |
| 61 | WATER SUPPLY PIPES AND FITTINGS |
| 62 | Providing, fixing G. I. pipes complete with G. I. fittings and clamps includingcuttingandmaking good the walls etc. (internal work) - (Exposed on wall) |
| 63 | 25mm dia nominal bore |
| 64 | 32mm dia nominal bore |
| 65 | Providing, fixing G. I. pipes complete with G. I. fittings and clamps includingcuttingandmaking good the walls etc (internal work) - Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall. |
| 66 | 15mm dia nominal bore |
| 67 | 20mm dia nominal bore |
| 68 | Providing & fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) |
| 69 | 25 mm nominal bore |
| 70 | 32 mm nominal bore |
| 71 | Providing and fixing ballvalve (brass) of approved quality complete. (High or low pressure with plastic floats). |
| 72 | 20 mm nominal bore |
| 73 | Providing&fixing15 mm nominal bore45 cm long unplasticised PVC connection pipewith brass unions. |
| 74 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and makingnecessaryholes for inlet, outlet and overflow pipes but without fittingandbasesupportfor tank. |
| 75 | 2000 litres capacity ( 3 Nos.) |
| 76 | EXTERNALWATERSUPPLYSYSTEM |
| 77 | Providing, fixing G. I. pipes complete with all required G. I.fittings including trenching and refilling etc. (external work) |
| 78 | 32 mm. dia nominal bore |
| 79 | Constructing brick masonry chamber 300 x 300x500mm, insidewithF.P.S. brick work in cement mortar 1: 4 (1 cement : 4 coarse sand) for StopCock, withC. I. surface box 100 x 100 x 75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4mix (1cement : 2 coarse sand:4 grade stone aggregate 20mm nominal size); necessary excavation, foundationconcrete 1:5:10 (1 cement :5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar1 : 3 (1 cement : 3 coarse sand )12mmthick finished with a floatingcoatof neat cementcomplete as per standard design |
| 80 | EXTERNALSEWERAGESYSTEM. |
| 81 | Excavating trenches in all kind ofsoil of required width for pipes. including excavation for sockets and dressing of sides, ramming of bottoms, including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & disposing of surplus excavated soil as directed within a lead of 50m. |
| 82 | up to 1.50 m depth |
| 83 | Pipes 80 mm to 300 mmdiameter |
| 84 | Providing, layingandjointingglazed stone warepipes grade `A\" withstiff mixture of cement mortar inthe proportion of 1:1 (1cement :1 fine sand) including testing of joints etc complete. |
| 85 | 150 mm diameter |
| 86 | Providingandlayingcementconcrete 1 : 5 : 10 (1 cement : 5 coarse sand : 10 gradded stoneaggregate40 mm nominal size) alround S.W. Pipesincludingbed concrete as per standard design. |
| 87 | 150 mm diameter S.W.Pipe |
| 88 | Constructing brick masonry manholewith F.P.S.bricksin cement mortar 1 : 4 (1 cement : 4 coarse sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4gradestone aggregate 20mm nominal size); foundation concrete 1:4:8 mix(1 cement : 4 coarse sand : 8 gradedstoneaggregate40 mm nominalsize) insideplastering 12 mm thickwith cementmortar 1:3 (1cement 3 coarse sand ) finished with a floating coat of neat cement and makingchannels incementconcrete 1:2:4 (1cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finishd with a floating coat ofneatcement completeasper standard design |
| 89 | Inside size 90 x 80 cm & 45 cmdeep including CI cover with frame (light duty) 455 x 610mm internal dimension total wt. of cover & frame to be not lessthan 38 kg (wt. of cover 23 kg and wt. of frame 15 kg) |
| 90 | Inside size 120 X 90 cm. and 90cm. deepincluding CI cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (wt of cover 58 kg and wt. of frame 58 kg.) |
| 91 | Providing and fixing square mouthS. W. Gully trapgrade `A\" complete with C.I. gratingbrickmasonry chamber with F.P.S bricks and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design |
| 92 | 180 x 150 mm. size P type |
| 93 | PART B(NON SCHEDULED ITEMS - AS PER MARKET RATES) |
| 94 | Providing & fixing of 450 mm long C. P. brass towel railcomplete with C.P. brass brackets |
| 95 | Providing & fixing of ISI Markrd CP brass bib cock 15 mm. with flange of approved quality |
| 96 | Short body Bib Cock (Jaquar 037 or equivalent) |
| 97 | Providing & fixing of ISI Marked CP brass angle valve 15mm. with flange of approved quality (Jaquar 053 or equivalent) |
| 98 | Providing & fixing of hand lever operated forged brass body full way ball valve type isolating valve having forged brass hard chrome plated mirror finish ball, steel handle with PVC grip, teflon seat, screwed ends tested to a pressure of 15 kg/sqcm complete. (Make : CIM / Audco / Festo / Zoloto / Advance) |
| 99 | 15 mm nominal bore |
| 100 | 20 mm nominal bore |
| 101 | Providing & fixing of medium class G.I.spout up to 300 mm. length including cutting and making good the walls and floors etc. as required. |
| 102 | 25 mm dia |
| 103 | Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. |
| 104 | Septik Tank |
| 105 | Excavation in foundatio in ordinary soil (loam, clay or sand) including lift upto 1.50m and lead upto 30m. And incuding filling ,watering and ramming of excavation earth in to the space between the building and siede of foundation trenches or into the plinth or removal and disposal of surplus earth as directed by engineer in charge S.I. No. 251 |
| 106 | Cement concrete with 20mm gauge dalla stone aggregate approved chopan coarse sand and cement in the proportion of 4:2:1 in hold fast including supply of all materials, labour and tools and plants etc. required for proper completion of work. As per s.i.no. 279(I) |
| 107 | M-150 brick work in 1:4 cement and C/sand mortar in foundation and plinth including supply of all materials, labour and Tools and Plants etc. required for proper completion of work. S.I.No. 305 |
| 108 | 6 mm thick plaster with cement mortar consisting of 1 Part cement and 3 Part of approved coarse sand. Minimum thickness not to be less than 10mm. Including supply of all materials, labours and T&P etc. required for proper completion of work. But finishing the surface with neat cement. As per S.I.No 583 |
| 109 | 40 mm thick 1:2:4 cement conc. Flooring with cemnet, approved coarse and 2 cm. Graded approvedstone balast laid in planels finished with 3 mm (1/8\") floating coat of neat cement or cement and marble dust in ratio of 5:1 as specific over and iremoving any overlapping mortar at the joints of the panels if any giving them of all materials, labours, T& P etc. required for proper completion of the work. As in item no. 601(a) above but floors shall be 4 cm thick instead of 2.5 cm thick without base concrete. S.I.No. 605 |
| 110 | R.C.C. work with cement, approved coarse sand and 2 cm gauge approved stone ballast in the proportion 1:1.5:3in R.C.C. T-beam Slab, excluding supply of steel and its bending but including fixing and binding the same with 24 B. W.G.G.I binding wire and including necessary centering and shuttering etc and also including s/o all materials required for proper comletion of the work.. S.I. No. 284 A |
| 111 | Mild steel or iron work in plain work such as reinforced cement concrete (when not included in over all rate) wrought to required shape as necessary including bending for proper completion of work, supply of steel, all labour etc. required and including westage bend, hook and authorised over lapping shall be measured.S.I.No. 504 |
| 112 | R.C.C. Slab @ 1.00 %volume ofconcrete |
| 113 | Providing and fixing soil, waste and vent pipes : Centrifugally cast (spun) iron socketed pipe as per IS: 3989 D.S.R. 17.35.2.2 |
| 114 | Providing and fixing plainSand cast iron 100 mm diameter bend of required degree. as per IS : 3989. D.S.R. 17.39.1.2 |
| 115 | 100 mm diameter sand cost iron S&S |
| 116 | Providing and fixing plainSand cast iron 100 mm diameter bend of required degree. as per IS : 3989. D.S.R. 17.39.2.2 |
| 117 | 75 mm diameter sand cost iron S&S |
| 118 | Providing and fixing terminal guard : Sand cast iron S&S as per IS - 3989 D.S.R. 17.56.2.2 |
| 119 | 75 mm |
| 120 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :150 mm diameter. D.S.R. 19.1.2 |
| 121 | S.W. Pipe 150 mm dia meter |
| 122 | Supplying and fixing C.I. cover without frame for manholes : 455 x 610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg D.S.R. 19.18.1 |
| 123 | Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugallycast (spun) iron pipes of diameter complete. Made with 12 mm dia meter M.S. box 2.00 meter long and clamp made with 30x2mm flat iron with 40mm long bolt and nut as per (M.R.) |
| 124 | Soak Pit |
| 125 | Excavation in foundatio in ordinary soil (loam, clay or sand) including lift upto 1.50m and lead upto 30m. And incuding filling ,watering and ramming of excavation earth in to the space between the building and siede of foundation trenches or into the plinth or removal and disposal of surplus earth as directed by engineer in charge S.I. No. 251 |
| 126 | M-150 brick work in 1:4 cement and C/sand mortar in foundation and plinth including supply of all materials, labour and Tools and Plants etc. required for proper completion of work. S.I.No. 305 |
| 127 | Providing filling brick bats mm brick ballast S.I.No.1 (c) |
| 128 | Providing filling 63-40 mm brick ballast S.I.No.2 (b) |
| 129 | Providing filling 40 mm brick bats S.I.No.2 (a) |
| 130 | R.C.C. work with cement, approved coarse sand and 2 cm gauge approved stone ballast in the proportion 1:1.5:3in R.C.C. T-beam Slab, excluding supply of steel and its bending but including fixing and binding the same with 24 B. W.G.G.I binding wire and including necessary centering and shuttering etc and also including s/o all materials required for proper comletion of the work.. S.I. No. 284 A |
| 131 | Mild steel or iron work in plain work such as reinforced cement concrete (when not included in over all rate) wrought to required shape as necessary including bending for proper completion of work, supply of steel, all labour etc. required and including westage bend, hook and authorised over lapping shall be measured.S.I.No. 504 |
| 132 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :100 mm diameter. D.S.R. 19.1.1*0.88 |
| 133 | WIRINGPOINTS |
| 134 | Supply and wiring of following submainnumber & sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. |
| 135 | A) 1 No 4sqmm |
| 136 | B) 1 No 6sqmm |
| 137 | C) 1 No 10 sqmm |
| 138 | D) 2 No 10 sqmm |
| 139 | E) 2 No 16 sqmm |
| 140 | SUB HEAD II - INSTALLATION OF LIGHT FIXTURES AND FANS |
| 141 | Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects. |
| 142 | Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects. |
| 143 | Supply & fixing of Call Bell Of Approved Make on matching polishedMDFEG boardbrassincludingconnectionetc. as required. |
| 144 | Supply & fixing of 36watt to 46 watt indoor Recess mounting LED square fitting for armstrong ceiling having powder coated die cast aluminium housing body with extended heat sink and diffuser of special polycarbonate metarial and driver set complete in all respect CAT-AAA |
| 145 | Supply and fixing LED tube light with batten suitable for up to 1X22 watt LED tube light fitting including tube on surface complete in all respect CAT-AAA |
| 146 | Supply & fixing of single wall light bracket made of brass on matching polishedMDFEG boardbrassincludingconnectionetc. as required. |
| 147 | Supply and erection of AC 1200mm Sweep, 230/250 Volts, 50 Hz ceilling fan with regulater standar down rod, blades including connection etc. complete as required |
| 148 | Supply and erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required450mm sweep. |
| 149 | Supply and fixing of power plug with 20A/250 V flush type modular switch and 5 Pin 20 A/250V flush type universal modular socket, switch on concealed M.S. box including supply of all materials, labour T&P etc. |
| 150 | Supply & fixingof Sheet Steel Enclosure Surface/ Flush Mounting fitted With 20/32 Amp. 2Pin and earth metal clad scraping earth plug and socket complete in allrespects as per direction and satisfaction of engineer-in-charge. |
| 151 | SUB HEAD IV - EARTHING |
| 152 | Supply and burying of 600mm x 600 mmx3mm copper plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. piope and funnel for watering and two earthing lead of two no 8 SWG copper wire in 15mmdia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and copper wire will be extra) 30 cm square C.I. frame with hinged cover masonary housing alternate layers of charcoal/cock and salt at least 150mm thick alround etc complete in all respects. |
| 153 | Supplying & Laying of 25mmx3mm G.I. Strip for earthing purpose as required complete in all respects. |
| 154 | Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects. |
| 155 | SUB HEAD V - MAINL. T. PANELS |
| 156 | Supply, installation, testing and commissioning of electrical panel, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection.The panel sheet structure shall undergo seven tank pre-treatment process before painting.The sheet steel shall be all of 2.2mm thick CRCA sheet.All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers.The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm.The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections.All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable.Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places.The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and |
| 157 | adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters.Proper sized cable termination gland plates shall be provided oncable alleys and knockouts for same shall be provided during fabrication stage itself.The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions.A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel.Panel shall be so designed at to have minimum 20% spare feeders/space.Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement.All cable terminations shall be from top.The complete panel shall be fuse less type, for control circuits 2A/6A MCB\"s to be used. |
| 158 | All bus bars shall be of aluminium, electrolytic grade only.Maximum design density shall not exceed 1 Amps/Sqmm.All bus bars shall be insulated with coloured heat shrinkable PVC sleeved.All bus bar supports shall be non hygroscopic DMC/SMC supports. |
| 159 | The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section. |
| 160 | The minimum clearances between bus bars shall be as follows : |
| 161 | Phase to phase - minimum 20mm |
| 162 | Phase to neutral-minimum 15mm |
| 163 | Main L.T. Panel : |
| 164 | Incoming : |
| 165 | One (1) No400Amp. 4 pole MCCB |
| 166 | Metering : |
| 167 | One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch. |
| 168 | One (1) No. (0-300A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc. |
| 169 | One (1) Set of Phase Indication Lamp. |
| 170 | Bus Bar : |
| 171 | One (1) No. 300 A, TPN aluminimum bus bar of suitable length. |
| 172 | Outgoing : |
| 173 | Phase indication lamps on each outgoing to be provided. |
| 174 | 400 Amps TPN MCCB - 1 No. |
| 175 | 100 Amps TPN MCB - 4No. |
| 176 | 63 Amps TPN MCB - 1No. |
| 177 | SUB PANEL (FIRST FLOOR) |
| 178 | Incoming : |
| 179 | One (1) No200Amp. 4 pole MCCB |
| 180 | Metering : |
| 181 | One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch. |
| 182 | One (1) No. (0-125A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc. |
| 183 | One (1) Set of Phase Indication Lamp. |
| 184 | Bus Bar : |
| 185 | One (1) No. 125 A, TPN aluminimum bus bar of suitable length. |
| 186 | Outgoing : |
| 187 | Phase indication lamps on each outgoing to be provided. |
| 188 | Outgoing: 200 Amp TPN MCB - 1 Nos. |
| 189 | 100 Amp TPN MCB - 3 Nos. |
| 190 | 63 Amps TPN MCB - 2No. Spare |
| 191 | 40 Amps TPN MCB - 4No. Spare |
| 192 | SUB-HEAD VIII: CABLES |
| 193 | Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1100 Volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. S.I.No.501(I) |
| 194 | 3.5 core 185 sqmm |
| 195 | 3.5 core 50 sqmm |
| 196 | 3.5 core 25 sqmm |
| 197 | Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. |
| 198 | 3.5 core 185 sqmm |
| 199 | 3.5 core 50 sqmm |
| 200 | 3.5 core 25 sqmm |
| 201 | Supplying and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge. |
| 202 | 185 Sq.mm |
| 203 | 50 Sq.mm |
| 204 | 25 Sq.mm |
| 205 | C.C. Road |
| 206 | Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50m and lead upto 30m. and including filling, watering and ramming of excavated earth in to the space between the building and side of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by engineer in charge. As per S.I. No. 251 |
| 207 | Concrete with 40mm gauge approved stone ballast, coarse sand and cement in proportion of 8:4:1 in foundation including supply of all materials labour and tools and plants etc. required for proper completion of work. S.I. No. 281 |
| 208 | M-150 brick work in 1:4 cement and C/sand mortar in foundation and plinth including supply of all materials, labour and Tools and Plants etc. required for proper completion of work. S.I. No.305 |
| 209 | Laying C.C. Road slab 10cm (4\")thick consisting of 1:1.5:3 cement,coarse sand & Approved 2 cm gauge stone girt, over prepared sub grade after its rectification & bringing it to proper camber & including supply of all matterial,labour T&P.etc required for proper completion of the work, finished to required templete as directed by E/I but excluding cost of metal required for reflection of the sub grade. Take a slab length of 33 ft and 4\" in depth.As per S.I.No. 773A(Road Work) |
| 210 | Struck pinting with cement mortar consisting of 1 part cement and 2 part of sand of 1.25 F.M. including supply of all materials labour and T&P etc. required for proper completion of the work. S.II.No. 574 |
| 211 | Interlocking |
| 212 | Excavation of foundation in ordinary soil (loam, clay or sand) including lift upto 1.50 m and lead upto 30 Rm and including, filling, watering and running of excavated earth in to the trenches or into the space between the buildings and side of foundation trenches. As per S.I.no. 251 |
| 213 | Cement Concrete with 40 mm gauge brick ballast sand of 1.25 finenees modulous and cement in the propetion of 1:5:10 under plinth including supply of all materilas, labour and T&P etc. required for proper completion of work as per S.I.No 275 |
| 214 | M-150 brick work in 1:3 cement and coarse sand in super structure including necessary cutting and moulding of brick work, but for half brick wall add for extra lbour icluding supply of all materilas, labour and T&P etc. required for proper completion of work. S.I. No. 307+ 309+ 310A |
| 215 | Struck cement pointing with 1:2 cement and sand of 1.25 F.M. mortar with coloring materials to much the brick work colour including supply of all materials, labour, tools and plants etc. required for proper completion for work. (Racking and washing surface) S.I.No. 574 |
| 216 | Cement Concrete with 40 mm gauge brick ballast sand of 1.25 finenees modulous and cement in the propetion of 1:6:12 under plinth including supply of all materilas, labour and T&P etc. required for proper completion of work as per S.I.No 273 |
| 217 | Providing and laying of 1 Sheped mechanically compressed Interlockingcement concrete blook pavement having thickness 80 mm Manufactured by high pressure & controlled vibration machine of OPC cement mixed with 25% marble powder with minimum 5 mm thickopping, Having compressive strength not less them 30 MPa including cost of all material, labour, T&P leveling and dressing of surface to required level and slope, spreading and, moisting 30 mm, thick local sand including filling joints for proper completion of the work including all type of taxes, T.T. etc. as per drawing and Technical specification, SI NO-786(1) NEW |
| 218 | Rainwater Harvesting |
| 219 | Earth work in excavation over areas including disposal of excavated earth, lead upto 50m, disposed earth to be levelled and neatly dressed. |
| 220 | In all kind of soil upto 1.5m depth |
| 221 | In all kind of soil upto 1.5m to 3.0m. depth |
| 222 | In all kind of soil upto 3.0m to 4.5m. depth |
| 223 | Providing and laying of cement concrete in base excluding the cost of centring and shuttering by 1:4:8 (1 cement : 4 coarse sand : 8 gradded stone aggregae 40mm nominal size) |
| 224 | Brick work with brick of class designation 150 in foundation and plinth in cement mortar (1 cement : 4 coarse sand) |
| 225 | Reinforced cement concrete work in slab with 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stoneaggregate 20mm normal size). |
| 226 | M.S. Work for R.C.C. work including, straightening, cutting bending binding and placing in position complete. |
| 227 | 15mm cement plaster on rough side of mix 1:4 (1 cement : 4 coarse sand) |
| 228 | Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of size 20mm ) as per standard design with 20x20mm sq bars. |
| 229 | Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m.including getting out the excavated soil & then returning the soil as required, |
| 230 | in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. |
| 231 | a) Pipes 80mm to 300mm diameter. |
| 232 | Providing, laying and joining glazed stone ware pipes grade \"A\"with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. |
| 233 | a) 150mm diameter |
| 234 | b) 250mm diameter |
| 235 | Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) upto haunches of S.W. Pipes including bed concrete as per standard design. |
| 236 | a) 150mm diameterS.W. Pipe |
| 237 | b) 250mm diameterS.W. Pipe |
| 238 | Constructing brick masonry manhole with 75 class designation F.P.S. bricks in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4graded stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix |
| 239 | (1 cement :4coarse sand: 8 graded stone aggregate 40mm nominal size) inside plasstering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 |
| 240 | a) Inside size 90x80 cm & 45 cm deep including C.I. cover with frame (light duty) total wt. of cover & frame to be not less than 38 Kg (wt. of cover 23 Kg & wt. of frame 15 Kg. |
| 241 | Extra for depth of man hole size 90x80 cm |
| 242 | Supply and stacking of graded stone aggregate of 45-90mm size |
| 243 | Supply & stacking ofstone chippings of 11.20mm. |
| 244 | Supply and stacking ofmoorum at site |
| 245 | Drilling of 150mm dia bore hole. |
| 246 | Bore hole of 300mm dia 15.0 Mtr. deep with machine |
| 247 | Supply of 100mm dia slotted rigid PVC pipe (4 Kg./sqcm pressure rating) and accessories. |
| 248 | Supply and fixing of nylon jali around the slotted pipes complete as required. |
| 249 | Providing & packing of coarse sand around the pipe. |
| 250 | Transport of boring tools other required equipments and installation at site. |
| 251 | Lowering of 100mm dia rigid PVC pipe in bore hole including cutting jointing etc. complete. |
| 252 | Fire Fighting |
| 253 | S.I.T.C of Butterfly Valve ISI marked with welding of Mange and fitting with packing & complete in all respect,make: SIR/KARTAR |
| 254 | 100mm |
| 255 | 80mm |
| 256 | 25mm |
| 257 | S.I.TC of Non Return Valve Dual PlateType ISI marked with welding of flange and fitting with packing & complete in all respect, make: SIR/ KARTAR |
| 258 | 100mm |
| 259 | S.I.T.C of Hose Reel complete with 30 meter long rubber 1 No hose pipe & nozzle make NEW AGE/ LIFE GUARD/New tech/Safepro |
| 260 | S.I.T.C fire Hydrant valve(SS) 80 mm inlet, single outlet with control and fitted with 63 mm dia complete with plastic cap and chain (Inlet flanged to IS: 5290) ISI marked: NEW AGE/ LIFE GUARD/New tech/Safepro |
| 261 | S.I.T.C External of fire hose cabinet fabricated from 20 gauge M.S. Sheet with double glazed front door (with 4 mm thick glass) and locking arrangement, including Iran Angle necessary supports approximate size. Make- Safepro |
| 262 | S.I.TC of 63 mm dia 15 M long rubberized fabric lined hose (R RL Hose) including (SS) male and female instantaneous type coupling approved by fire authority, machine wound with G.I. wire complete in all respects hose to 15:636 type II and coupling to IS:903-1975 with ISI certification. Make: NEW AGE/ LIFE GUARD/New tech/Safepro |
| 263 | S.I.T.C of Short Branch Pipe (SS) 63 mm X 15 mm ISI marked make: KARTAR /New tech/Safepro |
| 264 | S.I.T.C of Fire Man AXE |
| 265 | S.I.T.C of F B Inlet Two way with flang, Packing, & Nut Bolt make: NEW AGE/ LIFE GUARD/New tech/Safepro |
| 266 | S.I.T.C of 900 Its. Per minuts of discharge capacity of pump complete, Make:- Kirloskar / mather platt complete in all respect |
| 267 | S.I.T.C of terrace moter driven 900 Lpm Tarrece pump control panel complete in all respects auto/ manual |
| 268 | S.I.T.C of cylindrical type air cushoning tank 150 mm dia mtr. Long and of thickness 6 mm sheet on top of wet riser and with the pump set including flanged connection etc. the air tank shall be provided with automatic release valve etc complete in all respect |
| 269 | Supply Instilation, testing,commissioning of terrace moter driven 900 Lpm Tarrece pump control panel cable 10 x 4+2 x 1.5sqmm |
| 270 | S.I.T.C of pressure meter |
| 271 | Supply, Fixing, Providing, installation and testing of heavy gauge MS ERW Black \"B\" Class pipe as per relevant IS 1239, ISI marked with necessary accessories & complete in all respect Make -JINDAL/HISSAR |
| 272 | 100mm |
| 273 | 80mm |
| 274 | 25mm |
| 275 | Providing & Fixing of Store Pressure ABC Type Fire Extinguisher Capacity 4kg Make:- Safepro/Life Guard |
| 276 | Providing & Fixing of Co2 Type Fire Extinguisher Capacity 4.5kg Make:- Safepro/Life Guard |
| 277 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangment and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank |
| 278 | Fire alarm System B |
| 279 | Supply & fixing of Fire Alarm Main Panel with 04 Zone with 1 No power backup system. Make: AGNI /System Sensor |
| 280 | Supply & fixing of Armored copper cable 2CX1.5 Sq. mm Make: POLYCAB/ HAVALLS |
| 281 | Supply & fixing of Fire Bucket Stand With all Respect |
| 282 | Supply & Fixing of Smoke Detector,65Sr.Make -Apollo/System Sensor |
| 283 | Providing & Fixing of 2*12 volt 26AH Maintenance free Ibattery for backup support |
| 284 | Supply & fixing of Hooter, Make: AGNI |
| 285 | Supply & fixing of Manual Call Point, Make: AGNI |
| 286 | Supply & Fixing of Response Indicator Make:-AGNI |
| 287 | Lift 13 Person |
| 288 | SITC of Passenger lift/elevator complete in all respect. (Specification-SS,ARD,Gearless with machine room center/telescopic automatic door,3way intercom, floor announcement, full loaded bypass, 3phase survo stablizer, flooring-granite. Speed.-1.0 mtr/second. Make Omega elevator/OTIS) Capacity 13 Person, 884 Kg |
| 289 | GST Extra As per Applicable |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
