|
| 1 | Earth work in surface excavation in all kind of soil/ordinary rock/loose muck not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. as directed by Engineer in Charge |
| 3 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. |
| 4 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 5 | Providing and laying plain cement concrete of Nominal Mix 1:4:8 with 40mm and down size graded stone aggregates for all depths below and upto plinth level below Pavement or any other place, including tamping, ramming vibrating, curing all as specified in any shape, position, thickness and finishing the top surface rough or smooth, etc. all complete as per drawings, specifications and direction of Engineer-in-Charge. (Including the cost of shuttering). |
| 6 | Providing and laying in position Reinforced Cement concrete of M20 grade (1 cement, 11/2 coarse sand or crushed sand, 3 graded stone aggregate of 20mm maximum size) including consolidation, finishing, curing etc. complete as per specifications including the cost Form work shuttering, centering,(but excluding cost of steel reinforcement) complete and as directed by the Engineer. |
| 7 | Providing and fixing CENTERING AND SHUTTERING in superstructures in retaining walls, jambs, counter-forts, buttresses, equipment/ machine foundations, abutments,columns, lintels, suspended slabs, beams, staircases, landings, steps, non-circular tunnels/ bunkers/ silos/ shafts/ hoppers/ liquid storage structures etc. for all heights above plinth level including shuttering for single pour concreting, strutting, bracing, propping etc., keeping the same in position during concreting and removal of the same after specified period etc. for Straight/ Inclined Shuttering, keeping necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete and as specified and directed. |
| 8 | Random rubble masonry with hard stone in foundation/plinth/superstructure including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto 3m height with approved material includding stagging, challies, T&P required to complete the work in all respect |
| 9 | Providing and constructing Brick work using Cement mortar 1:6 ( 1cement : 6 river sand) above Plinth upto 3.6 m height using standard bricks of approved class/ quality, make or brand including scaffolding, curing, raking out joints, simultaneous pointing below ground level if specified,in plinth and super structure up to 3.5 mtr height complete as per drawings, specifications and as directed by Engineer-in-charge. Note:Brick work shall be donewith common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 |
| 10 | Plastering 6 mm thick with cement mortar 1:3(1 cement: 3 fine sand) at all heights including providing scaffolding, curing etc. complete as per specifications and as directed by Engineer in charge. |
| 11 | Plastering 12 mm thick with cement mortar 1:4(1 cement: 4 fine sand) at all heights including providing scaffolding, curing etc. complete as per specifications and as directed by Engineer in charge. |
| 12 | Plastering 20 mm thick with cement mortar 1:6(1 cement: 6 fine sand) at all heights including providing scaffolding, curing etc. complete as per specifications and as directed by Engineer in charge. |
| 13 | Repair to plater of thickness 12mm to 20mm in patches of area 2.5 sqm and under including cutting the patches in proper shape, raking out joints & preaparing plastering the surface of the wall complete, including dispossal of rubbish all complete as per direction of Engineer in Charge |
| 14 | Painting with Two or more coats of synthetic enamel paint using 1st quality synthetic enamel paint of Asian Paints, Berger, Nerolac, Shalimar or equivalent of approved brand and manufacture on wood/steel surfacesof required colour and shade, including applying additional coats wherever required to achieve even shade and colour, including preparing surfaces, scaffolding, filling with putty wherever required & cleaning etc. complete all as per specifications & as directed by the Engineer-in-Charge : |
| 15 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 16 | Finishing walls with ready mixed Premium acrylic emulsion paint of approved makehaving VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shadewith silicon additives. (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 17 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. not less than Two Coats |
| 18 | Removing white and colour wash by scraping and sand papering the surface smooth including necessary repair to scratches etc. complete as per direction of Engineer in Charge |
| 19 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand (Asian/Berger or equivalent ) withminimum two coats including applying additional coats wherever required, to achieve even shade and colour. |
| 20 | Providing and laying in flooring/skirting with rustic/matt finished/ 600X600 mm or equivalent approved sizes of double charged vitrified tile of make Somany/Kajaria/AGL/Jhonson or approved equivalent laid over 20mm/12mm thick cement mortar bedding 1:4 ( 1 cement : 4 sand) double charged vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make like Kajaria/Regency/Somani/Jhonson & Jhonson , in all colours and shades, laidcement mortar , jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., completefor entrance foyer, corridors, lobbies, etc.Note:i) Quoted rate shall include extra cement mortar required to match the water proofing plaster if any to maintain the lines and plumb of dado.ii) The quoted rate shall include border / combination of tiles as instructed by the Engineer in Chargeiii)The sizes of tiles mentioned are approximate and subject to the availability in market during execution. If the required size is not available the next higher size of tiles shall be used without any extra cost to the Department. The tenderer may note the same and quote accordingly. |
| 21 | In flooring with anti skid/Non slippery ceramic tiles tilestiles of size 300 x 300 mm (approx size) of M/s H& R Johnson /somany/Kajaria/Nitco/RAK India or approved equivalent with 20 mm thick 1:4 Cement mortar bedding(mixed with approved waterproofing compound @ 2% of cement ) including hacking of CC floor, cleaning the surfaceetc complete all as directed by the Engineer in charge. |
| 22 | Providing and laying vitrified floor tiles of 600 mm x 600 mm(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complete. |
| 23 | In dado / Skirting withtiles of 320X400mm (Approx size) of M/s H&R johnson (India) Limited /somany/Kajaria/Nitco/RAK India or approved equivalent fixed over 12 mm thick 1:3 cement mortar backing,jointed with cement slurry@ 3.3 Kg per Sqm & grouted with pigment of matching shade & finishing the top of skirting/dado etc. completeas directed by the Engineer in charge. |
| 24 | Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and ISI marked bright finished 19mm flap width stainless steel piano hinges with necessary screws, including dismantling the existing plywood/A.C sheet/Block board shutters, removing and refixing of architraves with necessary screws, including Supplying and fixing fittings, fixtures and fastenings of approved quality along with necessary CP brass screws, bolts, nuts, washers and other standard accessories etc.(2 Nos heavy duty100mm longx12mm barrel bolt Aluminium Baby latches, 2 Nos Aluminium bow Handle 100 mm long etc)all andstacking serviceable material and disposing off debrisetc. complete all as per specification and as directed by the EIC. |
| 25 | Providing and fixing 30 mm thick ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters includingfixing with 4 Nos. 100 mm (ISI marked) Stainless steel butt Hinges with S.S. wood screws and making provision for Mortice Locks/Night Latchesetc complete all as per specificationsand as directed by Engineer-in-charge. |
| 26 | Providing and fixing fly proof stainless steel grade 304/302 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mmwith matching wood beading in wooden doors, windows and clerestory windows and with nut-bolt/ screw/wooden/ metal beading as per existing arrangement in steel doors, windows and ventilators including removing the existing mesh if any, all complete as per the specification and as directed by EIC. Note: Clear opening area ofpanel inserts (excluding portion inside grooves or rebates) shall only measured for payment.2. Nut-bolts, screw, beading required for above work are to be arranged by contractor at his cost and nothig extra is paid on this account. |
| 27 | Cleaning of terrace and loft of all dried leaves, trees branches and debris if any including loading, transporting and unloading to a distance of 1km at designated place as per EIC instruction. |
| 28 | Providing and fixing 250x16 mm ISI marked oxidised Aluminiumsliding door bolts of grade AC10 with nuts and screws etc. complete as per the specification and as directed by Engineer. |
| 29 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm dia for all depth |
| 30 | Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge |
| 31 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 32 | Providing and fixing concealed Chlorinated Polyvinyl Chloride (CPVC) 15 mm nominal outer dia Pipes pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes cutting chases,jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge |
| 33 | Providing and fixing brasscock of approved quality of 15 mm nominal bore |
| 34 | Providing and Fixing C.P Brass shower rose with 15mm or 20 mm inlet of 150 mm diameter of approved make as per direction |
| 35 | Providing and Fixing nipple of size 15 x 50 mm of approved make as per direction of Engineer in Charge |
| 36 | Providing and laying in situ five course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0 mm thick of 3.00 Kg/ sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 5th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). |
| 37 | Providing and fixing single rubberfloor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 38 | Providing approved quality Stainless steel 304 tower bolts conforming to IS-204, 250 x 10mm. Of Godrej, Dorset, Kich or equivalent. |
| 39 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 40 | Dismantling of brick work in Cement mortar manually/ mechanically with out damaging adjacent structure including stacking of materials and disposal of unserviceable materials within 50m lead and as directed by EIC. |
| 41 | Dismantling cement concrete by any mean including dispossal of material within 50m lead asper direction of Engineering in charge |
| 42 | DismantlingW.C. European of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. |
| 43 | DismantlingW.C.Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. |
| 44 | Providing and fixing EUROPEAN WATER CLOSET suite comprising Hind ware or jaguar :a) WASH DOWN PATTERN European water closet best Indian make, in light colour glazed vitreous, with integral ‘P’ or ‘S’ trap.b) Plastic low level flushing cistern of gleaming light colour shade, best quality, champion or approved equivalent, conforming to IS:7231 complete with all internal fittings, matching heavy quality PVC flush bend mounted on a pair of white enamel painted brackets.c) 15 mm n.b. heavy quality PVC inlet of heavy quality connection with CP brass unions connected at ends.d) 15 mm n.b. screw down variety heavy quality C.P. brass stop cock conforming to IS:781.e) Solid plastic heavy quality seat with lid of approved make and colour with C.P. brass pillar hinges, conforming to IS:2548 (Part I&II).f) 15 mm n.b. heavy quality GI overflow pipe with specials from cistern to 150 mm above floor level painted and terminated with mosquito-proof perforated cap. |
| 45 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with\"S\" or \"P\" trap including dismantling of old WC seat and \"S\" or \"P\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Long Pattern W. C Pan of size 580x440mm |
| 46 | Providing and fixing Brass 100mm mortice latch and lock with 4 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 47 | Providing & Fixing of Ball valve (Brass) of approved quality, high or low pressure, with plastic floats completed: up to 25mm nominal bore |
| 48 | Providingapproved quality offixturesof make hindware/jaquar/kohler/CASA/Cera/Parryware/Somany/Jhonson or its equivalent make confirming to BIS including the necessary fixtures, screws, thead, nails, T/P etc. required to complete the work in all respect. |
| 49 | PP (Polypropylene) Toilet Seat Cover Compatible existing WC of approved makeincluding all T/P, screws, washers etc. required to complete the job in all respect as per direction of EIC |
| 50 | Providing & Concealed tank outflow valve compatible with existing concealed cistern including all T/P, screws, washers etc. required to complete the job in all respect as per direction of EIC |
| 51 | ProvidingExposed cistern tank outflow valve compatible to existing cistern including all T/P, screws, washers etc. required to complete the job in all respect as per direction of EIC |
| 52 | Providing PVC Water Connection Pipe for Geyser, Sink, Cistern Tank, Various Appliances 30 inch including all T/P, screws, washers etc. required to complete the job in all respect as per direction of EIC |
| 53 | Providing 15 mmInlet valve for concealed cistern compatible with existing cistern including all T/P, screws, washers etc. required to complete the job in all respect as per direction of EIC |
| 54 | Providingapproved quality of PVC Flexible Waste Pipe for Wash Basin, Sink and Drain Water Outlet (36 Inch) including all necessary fixtures |
| 55 | Stainless steel plug 40 mm threaded waste coupler |
| 56 | 15mm CP brass long neck Sink Cock |
| 57 | Providingapproved quality offixtures compatible to existing system confirming to BIS including the necessary fixtures, screws, thead, nails, T/P etc. required to complete the work in all respect. |
| 58 | PVC FLOAT BALL Cock WITH BRASS THREAD 20mm dia inlet |
| 59 | Providing and fixing approved quality Ball valve of 32mm dia |
| 60 | Providing and fixing approved quality Ball valve of 25 mm dia |
| 61 | Providing and fixing wash basinsize 630X450mm ofM/s. Hindware/jaguar or approved equivalentofwith C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, 15 mm n.b. screw down heavy quality C.P. bras stopcock conforming to IS: 781., 32 mm CP brass bottle trap, with extension pieceincluding painting of fittings and brackets, cutting and making good the walls wherever required complete as specified and directed |
| 62 | Providingandfixing20 mm diameter ChlorinatedPolyvinylChloride(CPVC)pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threadedfittings,i/cfixingthepipewithclampsat1.00mspacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the costofcuttingchasesandmakinggoodthesameincludingtestingofjoints complete as per direction of Engineer in Charge |
| 63 | Providingandfixing32 mm diameter ChlorinatedPolyvinylChloride(CPVC)pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threadedfittings,i/cfixingthepipewithclampsat1.00mspacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the costofcuttingchasesandmakinggoodthesameincludingtestingofjoints complete as per direction of Engineer in Charge |
| 64 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 65 | Providing and fixing approve quality of make Hindware/Jaquar/Kohler/Parryware/Hindware/Cera/Somany or its equivalent confirming to BIS including all material screws, tape, T/P etc. required to complete the work in all respect. |
| 66 | 15mm CP brass Angle Cock |
| 67 | 15mm CP Brass Bib Taps Heavy quality |
| 68 | heavy quality fancy variety C.P. brass screw down CONCEALED TYPE STOP COCKS |
| 69 | Providing & fixing 110mmdiaO.D.Size.embeddedPVCrainwaterpipejointedwithbonding solution of approved quality and make confirming to IS 13952 including clamps, connections etc. all as per approved manufacturer\"s details |
| 70 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink of M/s Nirali or equivalent without drain board with bowl size 610x510mm bowl depth 200mm as per IS:13983 and 15mm CP brass long neck pillar tap, fixing sink with C.I. brackets and stainless steel plug 40 mm and waste coupler, including painting of fittings and brackets, cutting and making good the walls wherever required, fixing in granitic slab, sealing the edges with silicon sealent. |
| 71 | Providingandfixing600x450mmbevelededgemirrorofsuperiorglass(of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 72 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm dia for all depth |
| 73 | Installation of sanitary fixtures to existing system |
| 74 | Supply and installation of following light fittings of Philips/Wipro/Bajaj make with all accessories like supporting hard ware, ceiling roses, downrods etc as required to complete the installation in all respects Industrial LED tube light fitting with lumen out put > 2000 Lumens similarto PhilipsTMC 501 batten with LED tube with required hardware to fix the fitting on wall/ceiling |
| 75 | Supply |
| 76 | Installation |
| 77 | Surface mounted LED bulk head light with lumen output of 1000 lumen similar to philips/wipro/bajaj make with required hardware for mounting on Wall |
| 78 | Supply |
| 79 | Installation |
| 80 | Supply and fixing of 230V,1200mm sweep Energy efficient 5 star rated BLDC ceiling fans with required downrods, ceiling roses etc of CG/ Khaitan/Orient/Bajaj/ Almonard/ Usha/ Marathon make with all required accessories.Warranty: 2 Years |
| 81 | Supply |
| 82 | Installation |
| 83 | Supply and fixing of 300mm sweep Single phase exhaust fan with air delivery > 1100 M3/Hr of CG/ Khaitan/ Orient/ Bajaj/ Almonard/ Usha/ Marathon make with all required supports and accessories |
| 84 | Supply |
| 85 | Installation |
| 86 | Supply and fixing of angle/straight bulb hoider with polycarbonate housing of Anchor/Wipro/Havells make with all required accessories |
| 87 | Supply |
| 88 | Installation |
| 89 | Supply and fixing of LED Bulb 10W Anchor/Wipro/Havells/Philips make with all required accessories |
| 90 | Supply |
| 91 | Installation |
| 92 | 12 Modular Switch Board with 6 Nos 6A switches, 1 No 6A Socket and 2 Nos Step type fan regulators |
| 93 | Supply |
| 94 | Installation |
| 95 | 3 Modular Switch Board with 1 Nos 16A Universal socket and 1 Nos 16 A switch |
| 96 | Supply |
| 97 | Installation |
| 98 | 6 Modular Switch Board with 2 Nos 10A 5 Pin sockets and 2 Nos of 10 A switches |
| 99 | Supply |
| 100 | Installation |
| 101 | Supply and installation of 6A switch |
| 102 | Supply and installation of Step type fan regulators |
