Tender For Sports Equipment And Other Development Works At The Government Higher Secondary School, Deoria (Laxmipura), Bundi-Rajasthan

Tender for sports equipment and other development works at the Government Higher Secondary School, Deoria (Laxmipura) - Laying And Jointing Pvc Pipe. Heading , Double Standing Twister Providing And Fixing Of Double Twister Sanding Of Site Notthan 1500 Mm(Length) X 6Dortim (Wdth) X 130Dmm (Height), To Enhance Flexibility Of Warst The Main Structure Tame Shall Be Madefrom G.Ipipe Minimum Of 80Nb C Class Welded With M S. Round Base Plate A Oeast A250 Mm & 10Mm Thick. The Handle Frame Is Minimum Of 25Nb Shall Be Made From C Class G.I, Pipethe Twister Plate Iobe Fitted-On The Bottom Flame Shan Be Made Tip Of M S. Round Plate Of Minimum Size Ozoo Mmand I Dmm Closing Caps Shall Bemade Up Of High Quallity Fiber Reinforced Plastic Material High Tensile Steel With Galvanized Nuts And Bolts Shall Be Used Tor Assembly The Powder Coating Shall Be Done With Pure Polyester Powders From Ac. , Sit Up Board Doubleproviding And Fixing Of Sit Up Board Double Of Size Nt Less Than 1760 Mm (Lenght) X 1140Mm (Widh) X 66Dmm (Height) To Enhance The Flexibility Of Whole Body. The Main Structure Frame Shall Be Made From G.I Pipe Minimum Of 80Nb C Class Welded With M.S. Round Base Plate Atleast 250Mm& 10Mm Thick. The Remaining Frame Of The Sit Up Board Minimum Of Z2mm Nb Shall Be Made From C Class Gi Pipe. The Powder Coating Shall Be Done With Pure Polyester Powder Ackzoneoble/ Berger/Nerolac Paints With 60 To 70 Micron Thikness Complete In All Respect Including Flxing The M.S. Holdfast In Cement Concrete Concretr To Hold The Whole Structure Under The Directions Of Engineein Chatge To Fullfil The Functional Requirement . The Indicative Design / Photo Is...... , Cross Trainer Providing And Fixing Of Cross Trainer Of Size Not Less Than 1320Mm (Length) X 60Dmm (Width)X 1750Mm. To Enhance The Mobility Of Upper Arid Iower Limbs And Improve The Flexibility Of Øs The Main Structure Frame Shall Be Made From C.I. Pipe Minimum Of Bonb C Class Welded With M.S. Base Plate Atleast 0250 Mm & 1 Omm Thick The Handle-Frame Shall Be Made Up Of Atleast 25Nb C Class G.L. Pipe. The Footrests Shall Be Made Tram Aluminum Castirw Materiål Of Size Than 130 Mm X 31Dmmx5mm Thickness And Mounted Ðn M.S. Plate Of Size Izdmmx31dmmzmm High Tensñe Steel With Galhnized Nuts And Bale Shall Be Used Assembly. The Powder Shall Be Done With Pure Polyester Powdei Of Adzonoble/ Berger Nerolac Pa.. , Abdominal Board/Sit Up Board Providing And Fixing Of Seated Puller Of Size Not Less Than 1900Mm (Length) X 740Mm (Width) X 1920Mm. (Height). Toof Upper Limbs And The Muscles In Chen And Backpromote Cardia• Pulmonary Function. The Main Structure Frame Shall Be Made From G.L. Pipe Minimum Of Sonb C Class Welded With Ms. Round Base Plate Atleast 0250 Mm & Idmm Thick. The Handle Frame Shall B. Mlnlmum Of 32Nb C Class G.L. Pipe. The Seat Frame Minimum Of 32Nb C Class G.L. Pipe. Closing Caps Shall B Made Up Of High Quality Fiber Reinforced Plastic Material.. High Tensile Steel With Galvanized Nuu & Bolu Shall Be Used For Assembly. The Powder Coating Shall Bewith Pure Polyester Powders Of Ackzonoble Berger Nerolac Paints With 80 To 70 , Surfing Boardconstruction Or Tube Well From Groundand Upto 100 Mtr. Depth And Above Or Following Siza In All Type Orsoil In Alluvium Strata, Unconsolidated Formation Such As Pebbles Bouldersetc. By Bailing Method Add Without Gravel Packing As Per Is:2890 Part 1: 1991 And 192800 Part Il: 1979 (Bothuptoandsp«Ifications. The Work Includes Formation Of Cavity At Bottom By Development With Approprtate Air Compresor Orbailer Pumping And Also Lowering Or Casing Pipe Bat Excluding Cost Or The Casing Pipe The Tube Well Should Have A Throughout Bore Nominal Dia Orc•Sing Pipe. The Work Would Be Completed After Obtaining Und Water. ( Nominal Bore Iso Mm Dia. ) , Cross Walker Providing And Fixing Of Cross Trainer Of Size Not Less Thán 1320Mm (Length) X 60Dmm (Width) X1750mm. (Height), To Enhance The Mobility Of Upper And Lower Limbs :And Improve The Flexibility Of Joints. The Main Structure Framé Shall Be Made From G.I. Pipe Minimum Of Bonb C Class Welded With M.S. Round Base Plate Atleast 0250 Mm & 10Mm Thick. The Handle Frame Shall Be Made Up Of Atleast 25Nb C Class G.L. Pipe. The Footrests Shall Be Made Tram Aluminum Casting Material Of Size Less Than 130 Mm X 31Dmmx5mm Thickness And Mounted On M.S. Plate Of Size Izdmmx31dmmxzmm Thick. High Tensile Steel With Gålvanized Nuts And Bale Shall Be Used For Assembly •The Powder Coating Shall Be Done With Pure Polyester Powders Of Ackzonoble/ Berger Nerolac Pa... , Pull Chair Double Providiro Md Tn-Ctü (2 Wheel) Of Size Wt Than 700Mm (Length) X 1000Mm {Width) X 1280Mm (Height), To Iraeasè Mobiity Of Shodder Ant»Knee. The Frame Be From G.L. Pipe Rnhimum Bow •C Dass Welded With M.S. Rwód Base Atleast 0250 Mm & 10Mm Tick. Highs.S. Rwt Bob Shd Be Used Fw Asserffly. The Ñwder Coatirwwith Pure Polyester From Ackzonoble/ Berger? Nerdac Paints With 60 To 70Thickness. Complete All Respect Inaudingthe M.S. Holdfast Cement Concrete To Hold Thestructure, Under The Úections Ot In4wge Toftmjond Reqúement. The Indicative Design Photo Is As Per , Wide Slide Providing And Fixingof Sit Up Board Double Of Size Tess•Than 1760M (Length) X I140mm (Width) X (Height), To Enhance The Flexibility Of Whole Body. The Main Struddre Frame Shall Be Rnadè Trom G.L. Pipe Minimum Of 80Nb C Class Withm.S. Rourd Base Plate Atleast 0250 Mm.& 10Mm Thick The Remaining Frame Of Sit Up Board Minimum Of Z2mm Nb Shall Be Made From C Class Gl Pipe The Powder Coating Shall Be Done With Pure Pdyesterpowder Ackzonoble/ Bergerl / Nerolac Paints With 60 To 70 Micron Thickness. Complete In All Respect Including Fixing The Ms. Holdfast In Cementto Hold The Whole Structurenunder Thedirections Of Engineer-In M.S. Holdfast In Cement Concrete To Hold The Whole Structure Under The Directions Of Engineer-In-Charge To Fullfil The Functional Requirement. The Indigtive Design/Photo Is. , Double Swing Providing And Fixingof Chest Press Of Size Rwt Bss2000mm (Length) X 710Mm (Width) X Z20dmm. ( Height ) Toenhance Thestrenght Of Upper Limbs And He Muscles In Chest & Back And Promote Cardia Pulmonary Function The Main Structure Frame Shall Be Made From G.I Pipe Minimum Of Bdnb C Class Welded With M.S. Round Base Plate Adeast A 250Mm & 1Dmm Thick The Handle Frame Shall Be Made Up From Atleast 32 Nb C Clss G.L.Pipethe Seats And Back Rests To Be Fitted On The Outer Frames.Shall Be Madeup Of M.S Sheet Of Size Not Less Than Zzdmm X 300 Mmmmm Thickness. Closing Caps Shall Be Made Up Of High Quality Fiber Reinforced Plastic Material. High Tensile With Galvanized Nuts & Bdts Shall Be Used For Assemblt The Powder Coating S... , See Saw Double Providing And Fixing Of Doubletwister Sanding Of Size Not Iess Than 1500Mm(Length) X 6Domm(Width) X 1300Mm. (Height), To Enhance Flexibility Of Warst.The Main Structureframe Shall Be Made From G.I. Pipeminimum Of 80Nbc Class Welded With M.S. Round Base Plate Aoeast A250 Mm & 10Mmthe Handle Frame Is Minimum Of 25Ñb Shall Be Made From C Class G.T. Pipe. The Twister Plate Io Be Fitted On The Bottom Flam Shall Be Made Tip Of M.S Round Plate Of Minimum Size 0Z00mm And 1Dmmthick Closing Caps Shall Bemade Up Of High Auallty Fiber Reinforced High Tensile Steel With Galvanized Nuts And Bolts Shall Be Used For Assembly . The Powder Coating Shall Be Done With Pure Polyester Powders From Ac. , Blank No Item Enter And No Price Enter This Colume , Blank No Item Enter

INR 500 /-

INR 5 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB