Tender For Addn/Altn To Np-11 At New Navy Nagarcolaba, Mumbai; 1 Dismantiling of Asbestos cement (Corrugated, semicorrugated, etc.)sheets in roof coveringcomplete all as specified and directed. 2 Supply and Fixing in position Pre painted galvalume sheet aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour as in roof covering/claddig to wall, fixed with self tapping screws, having tensile strength of 550 Mpa yield strength and zinc (galvanised) + Aluminium combined coating of 150 GSM/PM2(AZ-150) of 50mm TCT having top colour coat of regular modified polyester/silicon modified polyester/HDEP polyester of 18 to 20 micron and back coat of 5 to 7 micron Epoxy primer fixes.RMR 1040 profile width 1125mmNote : The sheet shall be fixed to MS angle with or J hook with incl. wind ties etc & wind ties shall be measured seperately all as specified and directed. 3 Dismantling of MS grill/grating of any description and position etc. 4 M&L and fabrication of mild steel work as in posts,purlins,crane gantires, rafter ,rails,wind tie nut & bolt etc and fasteningsetc and heavy brackets framing (MS tube, beam,tee,angle,channels,flat section etc and other sections) including distance pieces,cleats etc complete all as specified and directed . 5 M&L two coat synthetic enamel paint over a coat of red oxide primer on new steel surfacesincluding prepration of surface of any description over 10 cm width or girth not otherwiseall as specified and directed 6 M & L for Brick work built in cement mortar 1:4 using old side sub class B bricks in wall straight or curved on plan exc 6m mean eadius complete all as specified and directed 7 Taking down cement plaster of any description on brick walls or concrete surfaecs etc. including racking out joints, hacking for key, scrubbing down with water and removing debaris out side defence land complete in patches all as specified and directed . 8 M&L for 20 mm thick plasteringin two coats 15 mm thick backing coat in CM 1:6 and 5 mm thick setting coat in CM 1:4mixed with water proofing compound @ 2% by weight of cement on fair faces of brick work or concrete wall surfaces finished even and smooth without using extra cement all as specified including scaffolding, Safety net etc all complete as directed by Engr-in-Charge. 9 M & L for Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement. 10 Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. 11 Prepration of new plastered surfaces of walls, pillars, cornices, priming plastered and other surfaces with alkali-resistant priming paint over a coat of wall care puttyand applying two coats of distemper oil emulsion, white or tinted on walls all as specified 12 Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 sqm each all as specified and directed all as specified and directed. 13 All as per Item No 12 above but exc 1.5 sqm but n exc 4 sqm each all as specified and directed. 14 S & F Factory made 100% solid PVC Flush door shutter 30mm or more thick made from CO Exruded three layer rigid PVC foam sheet (Single extrudeed) with dennsity not lees than 600 kg/cbm outer layer (0.8-1mm) thick should be of rigid PVC with density of not lessthan 1400 kg/cbm, Both the surface to be laminated with 0.12 mm thick PVC film with suitable adhesive. 15 S & F solid PVC door frame made out of single piece extruded solid PVC foam profile with homogenous fine celluar structure having sommoth outer intergral skin having 62 mm width & 32 mm thickness of density 600 kg/cbm will be mitred and jointed with self driven self driven self tapping screws of size 50 mm x 8 mm and PVC solvent cement or fusion heat welding process all as per manufactures spn and direction of Engineer in Charge 16 M&L machine cut Kota stone ( greenish colour, pre mirror polished) slab in one piece as in double steps cill of aluminium slding window 18 to 20 mm thick over including 20 mmthick screed bed in cement mortar 1:4 complete all as specified. 17 M&L machine cut Kota stone ( greenish colour, pre mirror polished) slab in one piece as in lintel and and sides of aluminium sliding window 18 to 20 mm thick over including 15 mm thick rendering in CM 1:3 complete all as specified and directed. 18 S & F powder coated anodised aluminium frame/track or shutters for windows, ventilators etc. with one or more rebates including joining cleat for fixing etc.fixed or sliding type/louvered window or ventilator without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws locking arrangements etc. complete all as specified and directed by Engr-in-Charge. Note:Minimum 25 micron anodisation for all aluminium sections) 19 M&L powder coated aluminium grill with suitable aluminium anodised frame section of ‘F’ section of size 23.4 x 15.3 x 1.4 mm thick manufactured by M/S Deco grill pattern DG-102 (DG-102 (80 X 66 mm aperture) all complete. 20 S&F 4mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane all complete. 21 S&F 4mm thick frosted sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane all complete. 22 S & F Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to Aluminium doors,windows shutter aluminium wire staples complete all as specified and directed. 23 S&F in repairs aluminium serrated finish 20mm dia deorative curtain rod of approved pattern and shade with all fittings as per site requirement such as end block, rounded block, brackets, CP screws, rovel plug, etc. complete all as specified and directed by Engr-in-charge. 24 Dismantling stone slabsof any description or thickness in floors / dados, etc laid bedded and pointed in any mortar complete all as specified and directed by the Engineer-in-charge 25 M&L for granite (of any type) 20mm thickthe machine cut , bedded and jointed with grey cement slurry and pigment to match shade of granite stone including grinding and polishingcuttingpinning complete.over including 20mm thick screed bed cement mortar 1:4 including cutting for wash basin /urinal partition etc completeall as specified & directed 26 M & L for 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over including 10mm thick screed bed cement mortar 1:4 including cutting for wash basin /urinal partition etc completeall as specified & directed 27 S&F in repairs vitreous china wash basin white flat back 550 x 400mm , with fitting of PTMT waste coupling suitable size incl angle iron brackets with painting of brackets etc completeall as specified and directed . 28 S & F in repairpillar tap15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed 29 S&F in repair Stop valves, cast copper alloy high pressure 15mm bore ISI markedwith cruch or butterfly handles screwed down both side for iron pipescomplete as specified and directed 30 S & F 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed in repairs 31 S&F in repair 10litre capacity PVCvalveless, syphonic action type, flushing cristern, low level, white, with inlet, ball valve, float and handle including brackets all complete as specified and as directed. 32 S&F PVC connection 15mm size with PTMT nuts of length 450mm in repairs 33 S&F in repairs Bib taps, 15mm dia cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 34 S&F in repairs High density polyethylene pipes (HDPE) 40mm dia of pressure rating 6 kgf/cm2 fixed complete to wall, floors for drain out the waste water in Kitchen Sink/wash basin complete all as specified and directed. 35 S & F 600mm x 450mm bevelled edge mirror with glass shelf assembly of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers including glass shelf assembly all as specified and directed 36 S&F stainless steeltubular towel rail 20mm dia D type 60cm long between flanges all complete as directed. 37 S&F 32mm dia LDPE PVC waste pipe for WHB in repairs includding socket & screw complete all as specified and directed. 38 M&Lfor cudappah stone slab 20 mm thick, over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slabincluding rubbing and polishing complete for kitchen platformover 20mm thick screed bedcement mortar 1:4 etc completeall as specified & directed . 39 Supply and fixingin repair 20 mm bore GI tubing. fixed to wall including necessary short piece/length, including, breaking the existing brick wall for replacement of corroded GI pipe in/on wall and making good the distrubed surfaces complete all as specified and directed by Engineer-in-Charge. 40 All as per item No 39 above but 15 mm bore GI tubing. 41 M&L CI Nahani trap dia of outlet 75mm fixed in repairs including jointing to waste pipe in runlead. 42 S&F PTMT grating doom with or without hole over Nahani trap and floor trap of 100mm Dia 43 S&F in repairs vitreous China squatting pan (Orissa pattern), white, of size 580x440mm white, with P or S trap, integral foot rests including flush pipe, trap, lime concrete bedding inlcuding taking out of old lime concrete bedding, unserviceable connections etc and connecting up new complete all as specified and directed by the Engineer-in-charge 44 S&F in repairs vitreous China wash down water closet pan (Pedestal pattern) white, with P or S trap, including flush pipe, trap, connection to drain or outgoing pipe, anti-syphonic pipe, seat cover to match with colour of WC, closed pattern with flat bottom & cover and chromium plated mild steel or aluminum anodized hinge device and jointing and connecting up complete all as specified and directed by the Engineer-in-charge 45 S & F Sink made of stainless steel (304 Grade)1mm thick kitchen or laboratory with plugs, washers and wasters, including bedding in cement mortar to dwarf wallland connecting union to pipe over all size 610x460x229 mmcomplete all as specifice and directed. 46 Dismantling floor hearth or wall tilingincluding cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including removal of debries out of defence land complete all as specified and directed 47 M&L for Virified Ceramic tiles light shade 10 mm thick (square /rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over including 15mm thick screed bed or beddingin cement mortar 1:6 etc completeall as directed . 48 M&L non-skid coloured Ceramic tiles 300x300x6 to 7mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not excceding 0.11 sqm, in floors etc, set and jointed in epoxy mortar and pointed in white of coloured cement to match including 15 mm thick screed bed in CM 1:6 all as specified. 49 M & L Coloured glazed ceramic tiles300 x 200 x7mm on vertical surfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment over including 12mm thick rendering as in backing coat in CM 1:4 all as specified and as directed. 50 Rounding to edges of stone slabs one edge,such as in steps,cooking plateform,and other similar situations all complete as directed by Engr-in-Charge. 51 S&F 5.5 mm thick sheet glass ordinary quality coloured exc .5 sqm each complete all as specified and directed 52 S&F 100 mm size mild steel mortice 4 lever lock vertical type complete all as specified and directed. 53 S&F aluminiumdoor closer hydraulically regulated suitable for door shutters of 851 to 1000 mm in width complete all as specified and directed 54 S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed 55 M & L mild steel TMT bars 6 to 8 mm dia as in reinforcement cut to length, bent to shae required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (anealed not less than 0.9mm dia) complete all as specified and directed. 56 M & L mild steel TMT bars 10 mm dia and over cut to lenth, bent to shape required, including cranking,bending, spirally for hooping for columns, hooking ends and binding waith and including mild steel wire (annealed) not less than 0.9mm dia all as specified & directed. 57 Use & waste of form work to side and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc 58 Reinforced cement concrete M-30 (Design mix), as in beams,lintels all as specified and directed. 59 Demolition of cement concrete un- reinforced of any description and in any position not otherwise specifically provided and removing debaris from out side defence land complete all as specified and directed. 60 M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggegate as in floor, finished the surface even and smooth without using extra cement and spike rolling to surfaces or making impressions of expandedmetal whilst the concrete is green all as directed . 61 M&L 100 mm thick P.C.C 1:4:8 type D-2 using 40 mm graded stone aggegate as in sub base complete all as specified and directed 62 M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in subbase to floors all as specified and directed. 63 M&L for sand cushioning under interlocking paver blocks watering and compactcomplete all as specified & directed . 64 Factory Made machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed 65 Dismantling wall and ceiling boards (fibre,pulp, insulation etc) or insulation boards any thickness including cover fillets 66 S&F anodised aluminium snap grid frame work (Grid section bevelled tagular XL15mm silhouette) for false ceiling size of grid 605 x 605 mm including 6 mm dia GI hanger adjusting level fixed to slab/purlins by means of ceiling cleats made out of GI flat 40 x 3 mm & 600 x 600 x 16 mm size dune finished bevelled tegular board H3651B complete all as specified. 67 Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) 68 Supply& Fixing of18 mm thick RajshriCeluka ply of Plain color fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per specifications and as directed by the engineer - in -charge. 69 Supply& Fixing of18 mm thick Rajshri Celuka ply of one side Prelam/Rigidlam and other side plain white colourto make kitchen cabinet Shutter/ drawerFront shutters in double panel complete as per specifications and as directed by the engineer - in - charge. 70 Supply& Fixing ofauto closing hingesopenable at 0 degree for kitchen cabinet shutters Make; ( Hettich,Ebco, Prime) 71 Removing excavated soil and demolised material exc 5 Km but n.exc 10 Km out side MoD land complete all as specified and directed 72 Supply& Fixing ofstainless steel handles 100 mm size for kitchen cabinet shutters, , Make;( Hettich, Ebco, Prime) 73 Taking down copper/ aluminium point wiring (light, fan, socket or power)complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition sepertately) and making good disturbed surfaces of walls, floors etc. 74 Material and labour for point wiring confirming to IS-732:1989 complete with proper colour coding using, 1100 volts grade, 1.5 Sqmm, PVC insulated FRLS, unsheathed wire with multi stranded copper conductor conforming to IS-694, part-II, ISI marked in and including PVC casing and caping not less than 25 mm size, ISI mark with all accessories on wall/ceiling/floor/roof etc, including 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 volts multistranded copper conductor green colour as continuous earth wire connected to common earth dolly all as specified and directed for the following :- Note : - (i) Circuit conductor from MCB DB to Switch boards should not be less than 2.5sqmm. (ii) Modular PVC surface box shall be paid seperately under relevant items of this schedule. (iii) Civil work for making good to surface whereever required shall be deemed to included in quoted rate. 75 One light/Exhaust/Ceiling fan point controlled by one switch. 76 One 3 pin socket outlet, 5 Amps on the same board with other switches 77 One 3 pin socket outlet, 5 Amps, on the independent board 78 All as per item No 74.00above but with 2.5 sqmm cable for one three pin 15 Amps socket out let controlled by one switch. Note:- (i) Separate circuit shall be drawn from MCB. No taping from light circuit.(ii) Modular PVC surface box shall be paid seperately under relevant items of this schedule. (iii) Civil work for making good to surface whereever required shall be deemed to included in quoted rate. 79 All as per item No 74.00above but with 4.0 sqmm cable to connection of AC plug and socket box enclosure.Note:- (i) Separate circuit shall be drawn from MCB DB to plug socket box for each point control by one 25 Amps MCB and length of the circuit as per site requirement and as directed. No taping from light circuit.(ii) Modular PVC surface box shall be paid seperately under relevant items of this schedule. (iii) Civil work for making good to surface whereever required shall be deemed to included in quoted rate. 80 S & F modular switch, 6 Amps , One way, one module , ISI marked complete all as specified and directed. 81 S & F modular switch, 16 Amps , One way, one module , ISI marked complete all as specified and directed. 82 S & F modular socket, 6 Amps , 2/3 pin combined , two module , ISI marked complete all as specified and directed. 83 S & F modular socket, 16 Amps , 6 pin combined , two module , ISI marked complete all as specified and directed. 84 S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed. 85 S & F ceiling rose surface bakelite with ISI mark , flush type three terminals complete all as specified and directed. 86 S & F modular stepped type fan regulators 2 module, 120 W, 230 volts ISI markedcomplete all as specified and directed. 87 S & F modular PVC surface box 3 module complete all as specified and directed. 88 S & F modular PVC surface box 6/8 module complete all as specified and directed. 89 S & F modularwhite cover plate with frame 3 module complete all as specified and directed. 90 S & F modularwhite cover plate with frame 6/8 module complete all as specified and directed. 91 Supply and fixing integrated LED batten 20 Watt, 4 feet long, full white in Engineering plastic battern with white acrylic cover with built in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5 sqmm from ceiling rose to connector of fitting alongwith provision of two Nos of PVC box of size 75x75x20mm for mounting light fittingscomplete all as specified and directed. 92 All as per item No. 88.00 above but slim LED integrated batten of 10 watt 2 ft complete. 93 Supply and fix 2 x 2 LED luminaires CRCA housing with efficient optics ensuring perfectly uniform illumination, with polymer diffuser complete with all accessories suitable for recessed mounting 36 Watt, 240V, CDL/NW. The luminaire is pre-wired with high efficiency electronic driver having operating voltage 140-270V, P.F >0.95, THD <20% and IP20 protected alongwith provision of two Nos of PVC box of size 75x75x20mm for mounting light fittings as specified and directed by Engr-in-Charge.The contractor shall provide test certificate from authorized lab. 94 Taking down old unserviceable ceiling fan of any size/Make and deposite to MES store, Supply and fixing of ceiling fan 230V, 50 Hz, AC, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified. 95 Taking out Old, U/s one and S&FLED 45 Watts building street light in Aluminium PDC housing, toughened glass cover in IP66 protection with 3000 (k) including connecting light with three core copper wirefrom connector or ceiling rose. 96 M & L for snap-on PVC trunkingsystem withcover, angles, bends andall accessories and fitting of size 50x80mm fixing on wall Completeall as specified and directed. 97 Taking out unserviceable exhaust Fan and deposit to MES Store, supply and replacement with exhaust fan, 4 blade, heavy duty, double ball bearing, 230V, 50Hz, 300mm sweep having power input 70W speed 1440RPM, with protective bird guard including connecting with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified and directed. 98 Supplying and laying with commissioning and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of size 70 sqmm 3.5 core laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles and taking out old u/s damaged cables. 99 Taking out Old U/S and Supply and fixing of MCB TPN DB 4 way as per IEC 61439-3 Suitable for Flush /Surface mounting with 100 A Copper Busbar for phase with 2 Neutral bar, 2 Earthbar and Cable ties for Cable management fully insulated busbar & shrouded Neutral bars improved Pan assembly for ease of installation prefitted masking sheet reversible metalic door for IP 43 DBs for provision for MCB TPN upto 100A as incomer and SP/TP MCBs as outgoing complele all as specified and directed. 100 Taking out old unserviceable and S & F MCB DB SPN confirming to IP 43-IK 09 with acrylic double door, 8 way complete with din rail, Neutral and Earthing bargrouted in wall complete all as specified and directed. 101 S & F MCB, single pole & neutral, 32 Amp, 10KA, 230Volt, “C” curve. 102 S & F MCB, single pole, 6 to 32 Amp, 10KA, 230Volt, “B” curve. 103 Supply and fix MCB TPN 63A, 10kA, 415V. Make : Legrand/Siemens/Schneider/ABB 104 M & L for earthing complete with Galvanised steel earth plate eletrode 60cmx60cmx6mm thick buried directly in ground vertically to (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level, connecting to the Galvanised earth wire 4mm size, by means of Bolts, Nuts, Check Nuts and washer made of GI or Steel Earth connecting with test point, provision of Charcal and salt in alternate layers, watering pipe 20mm dia medium grade MS funnel with jali, PCC M-15 Type B-1 in pit with XPM not elss than 4Kg per Sqm and Earthpit with cover returning, filling, removing excavated material all as specified in electrical plate No 3 of SSR Part-I making good excavated surfaces such as hard standing refixing machine pressed precast concrete interlocking paver blocks removed during excavation on earthpit to mach existing surfaces after taking out old/unserviceable one complete and testing on completion all as specified and directed by Engr-in-Charge
