|
| 1 | Demolition of brick work/ stone masonry built in cement mortar including arches, pillars etc and excluding precast concrete article all as specified and as directed. |
| 2 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) andrubbish off the premises complete all as specified and directed. |
| 3 | Taking down chowkhats or frame withshutters without taking of shutters from frames not exc 1.5 Sqm each incl making good disturbed portion complete all as specified and directed. |
| 4 | Taking down chowkhats or frame withshutters without taking of shutters from frames exc 1.5 Sqm but not exc 4.00 sqmeach incl making good disturbed portion including removing to store complete all as specified and directed. |
| 5 | Dismantling Asbestos cement (corrugated, semi corrugated, etc ) sheets in roof coverings including ridge complete all as specified and directed. |
| 6 | Dismantling ceiling board (fiber, pulp insulation) or insulation board/slabs etc including grid work/wooden or aluminium frame works, cover fillet etc Complete all as specified and directed. |
| 7 | Demolition of cement Concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 8 | Surface dressing n exc15 cm deep and getting out any type of soilcomplete all as specified and directed. |
| 9 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation .etc in soft/loose soil complete all as specified and directed. |
| 10 | M&L for Cement concrete, (1:4:8) type D2 (using40mm graded aggregate) as in foundations |
| 11 | Returning, filling in including spreading ,levelling , watering and well ramming in layers not exc 25cm with excavated soil complete all as specified and directed. |
| 12 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 13 | Removingexcavation material/soil n .exc. 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and directed. |
| 14 | M&L forRCC 1:2:4 type B-1(Nominal mix) (using 20 mm graded aggregate) as in foundation, footing, foundation beam, plinth beam, base for columns, etc. complete all as specifiedand directed (Note:Reinforcement shall bemeasured and paid separately. |
| 15 | M&L for RCC 1:2:4 type B-1(Nominal mix) (using 20 mm graded aggregate)as in columns, etc. complete all as specifiedand directed (Note:Reinforcement shall bemeasured and paid separately. |
| 16 | M&L forRCC 1:2:4 type B-1(Nominal mix) (using 20 mm graded aggregate) as inbeams, cantilevers, bressummers, lintels over 1.5m span complete all as specifiedand directed (Note:Reinforcement shall bemeasured and paid separately. |
| 17 | M&L forRCC 1:2:4 type B-1(Nominal mix) (using 20 mm graded aggregate) as inroof beam and gable beam complete all as specifiedand as directed (Note:Reinforcement shall bemeasured and paid separately. |
| 18 | M&L forRCC 1:2:4 type B-1(Nominal mix) using 20 mm graded stone aggregates as in Chajjas complete all as specified and directed. Note:Reinforcement shall bemeasured and paid separately. |
| 19 | M&L for PCC 1:2:4 type B1 (using 20mm graded stoneaggregates) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including bituminous gap filling necessary form work, complete all as specified. |
| 20 | M&L TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookingends and binding with and including mild steel wire (annealed) not lessthan 0.9mm dia or securing with clips complete all as specified anddirected. |
| 21 | All as per Ser no 20 above, but 5mm dia and over upto and including10mm dia in stirrups, spacers and binders complete all as specified anddirected. |
| 22 | M&L form work to sides of concrete foundation, footings, bases of columns ,sides and sofit of foundation and plinth beam and similar works etc complete all as specified anddirected. |
| 23 | M&L form work to sides of pillars, posts, columns ,etc. complete all as specified anddirected. |
| 24 | M&L for formwork to sides and soffits of roof beams, gable beam complete all as specified and directed. |
| 25 | M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 10cm but n exc 20cm wide (rough finished surface)complete all as specified and directed. |
| 26 | M&L brick work with sub work with sub class \"B\" brick straight or curved on plain exc 6m mean radius build in CM 1:6 complete all as specified and directed. |
| 27 | M&L for brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 28 | M&L 15 mm thick rendering in CM (1:6) onfair faces of brick work or concrete surfaces finished even and fair without using extra cement on wall complete all as specified and directed. |
| 29 | M&L 15 mm thick rendering in CM (1:4) onfair faces of brick work or concrete surfaces finished even and fair without using extra cement with using WPC 3% by weight of cement on wall complete all as specified and directed. (WPC shall be measured separately) |
| 30 | Supply only water proofing compound |
| 31 | M&L forpreparation of new plasteredsurfaces of wall andapplying two coats of oil bound distemper over a coat of alkali resistant priming paint complete all as specified and directed. |
| 32 | M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed. |
| 33 | M&L forcomplete removal of existing treatment of surfaces and applying 1.5mm thick Birla or equivalent wall puttyto oldplastered surface and applying two coats of oil bound distemper complete all as specified and directed. |
| 34 | M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scrapping down smoke spot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with with suitable material like cement or plaster of paris etc and thereafter applying two coats of Cement base paint complete all as specified and directed. |
| 35 | M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 36 | M&L for 75mm thick PCC, (1:4:8) type D2 (using40mm graded aggregate) as in floors complete all as specified and directed. |
| 37 | M&L for joint free Non - skid Ceramic colouredtiles 8 to 10 mm thickarea of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors laid over and including 15mm thick screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 38 | M&L forjoint free Non - skid Ceramic colouredtiles 8 to 10 mm thickarea of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in skriting/vertical surface laid over and including 10mm thick rendering in CM 1:4 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 39 | M & L for non skid coloured ceramic floor tiles of size of tile exc. 0.11 but n.exc.0.18 sqm each 7 mm thick as in floor laid over and including 15mm thick screed bed in CM 1:6,set, jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 40 | M & L for colour glazed ceramic wall tiles of size 450x300x7mm thick on vertical surfaces laid over and including for rendering 10mm thick in CM (1:4) on vertical surface of wall. cement screed bet set and jointed in neat cement slurry and pointedin white or coloured cement to match all as specified. |
| 41 | M & L for 18-20 mm thick Granite tiles machine cut, laid over cement bedded and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 10 mm thick rendering in cement mortar (1:4) on vertical surfaces for backing of tiles complete all as specified. |
| 42 | M & L Machine cut kota stone slab flooring 18-20 mm thick over cement screed based laid and jointed with grey cement slurry mixed with pigment to match the shade of the slabincluding 20 mm thick screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified including rubbing and polish complete all as specified and directed. |
| 43 | M & L Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 10mm thick rendering in CM 1:4 etc. set and jointed in neat cement slurry and pointed including rubbing and polish complete all as specified and directed. |
| 44 | M&L 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with one ore more rebate includings necessary fixing lugs, stainless steel hinges, locks strike plate etc complete all as specified and directed. |
| 45 | M&L for PCC type C1,1:3:6 (using 20 mm graded aggregate) for holdfast blocks complete all as specified and directed. |
| 46 | M&L 35mm thick factory made flush shutters, solid core construction with particle board core and ply wood face panels, commercial type on both sides and fitted to chowkats with door stoper complete all as specified and directed. |
| 47 | M&L for Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and directed. |
| 48 | M&L for preparation of old painted wood or wooden based surfaces of any description not otherwise described exc. 10 cm in width or girth and applying one coat of synthetic enamel paint white or tinted complete all as specified and directed. |
| 49 | S&F powder coated anodized aluminum frame for doors, windows ventilations with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 50 | M&L powder coated Anodised aluminium window and ventilator shutters side hung type without sash bar, aluminium sections weighing 0.55 kg/m including necessary joining, cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hinges type B-21 100 mm long (2 nos) suitable handle 1 No complete all as specified and directed. Note:Glass shall be measured separately. |
| 51 | M&L powder coated aluminium sliding window shutters with frames( consisting of 02 Nos glazed shutters and 01 No gauge shutter) Series -D (25mm), 3 track sliding shutters, duly fitted with neoprenebeading, glazing clips, locking device, heat absorbing glass 5.5 mm nominal thickness in glazed shutters, stainless steel wire mesh of 0.254mm nominal dia of wire and 0.95 mm average width of aperture in gauged shutter andpowder coated aluminum grill 4mm dia, 75 x 75mm aperture fixed with standard aluminum beading fixed in outer portion of the chowkat complete all as specified and directed. |
| 52 | M&L 4 mm thick one side frosted sheet glass ordinary quality and glazing in square n.exc 0.5sqm in each pane fixed with neopunerubber gasket in aluminium frame complete all as specified and directed. |
| 53 | M&L Solid PVCdoor frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. tube, supplying & fixing in opening as per specification & drawings complete all as specified and directed. |
| 54 | M&L factory made PVC solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheetfor top rail, lock railand bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement , supplying and fixing in the frame at site as per specification & drawing as specified. |
| 55 | S & F 100 mm Butt hinges, medium weightcold rolled, stainless steel and fixed complete all as specified and directed. |
| 56 | S & F 75 mm Butt hinges, medium weightcold rolled, stainless steel and fixed complete all as specified and directed. |
| 57 | S&F 300mm long aluminium alloy anodised sliding door bolt with hasp & stapple (bolt type) and fixed clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast- aluminium alloy and fixed complete all as specified and directed. |
| 58 | S&F 125mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 59 | S&F 150mm long aluminium anodised tower bolts of extruded section and fixed, complete all as specified and directed. |
| 60 | S&F 125 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 61 | S & F aluminium(Die cast) body door closer hydraulically regulated, designation No .3 universal type suitable for door shutters upto 851 to 1000mm in width and of weight 35 kgcomplete all as specified and directed. |
| 62 | S&F 300mm , mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 63 | M&L for excavating in post holes (or similar holes) each n.exc 0.5Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25CM, in soft and loose soil complete all as specified and directed. |
| 64 | M&L cement concrete type B-2, 1:2:4 (40mm graded aggregate) as in foundations, filling and mass concrete in post, pillars complete all as specified and directed. |
| 65 | M&L Steel work in tubular trusses or rectangular/ square hollow section including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 66 | M&L Plates (plain or chequered square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed |
| 67 | M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay) heavy for large gates, hook and pintle hinges large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, flat iron, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming toFe-290 Gde-E-165 complete all as specified and directed. |
| 68 | M&L preparation of new Steel surfaces of any description, not otherwise descri-bed, over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 69 | M&L for preparation of old painted surfaces of steelof any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 70 | M&L pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated/trapezoidal steel sheet 0.50 mm thickof any colour having tensile strengthof 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 71 | M&L pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thickof any colour having tensile strengthof 550 Mpa as in roof ridge, covering/cladding/gutter to wall fixed with self tapping screws or \"J\" hookcomplete all as specified and directed. |
| 72 | M&L for Powder coated galvanised iron snap grid frame work of size 600 x 600 mm for false ceiling comprising of Main runner \"T\" section of size 38mm x 24mm x 0.40mm thickness, Cross \"T\" of size 29mm x 24mm x 0.3mm thickness and wall angle of size 24mm x 24mm x 0.43mm thick suspended with 4mm dia GI wire from purlin @ 1.20m c/c and fixed with 4mm thick designer ceiling boards complete all as specified and directed. |
| 73 | M&L110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 74 | M&L 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 75 | M&L50 mm bore Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2laid in trenches or in floors complete all as specified and directed. |
| 76 | S&F in repair PVC (SWR) vent cowl 110mm bore complete all as specified and directed. |
| 77 | S&F in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 78 | S&F in repair PVC (SWR) Bend radius any radius 75mm bore complete all as specified and directed. |
| 79 | S&F in repair PVC (SWR) floor trap plain with gratinghaving dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 80 | M & L for sand cushioning to receive interlocking tiles incl spreading, levelling in layerscomplete all as specified and directed. |
| 81 | M & L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade With GreyCement andpigment complete all as specified and directed. |
| 82 | M&L for pre polished chemically treatedchequered cement concrete coloured tiles25mm thick, set jointed and pointed with grey cement and pigments in neat cement slurry laid over 20mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 83 | S&F in repair white vitreous China wash down water closet pan (pedestal) pattern, and trap(excluding) fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc.complete all as specified and directed. |
| 84 | S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings symphonic actiontype with inlet ball valve and float, handle with & including bracket andPVC flush pipe 32 mm borecomplete all as specified and directed. |
| 85 | S&Fplastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 86 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 87 | S&F in repair vitreous china pedestal wash hand basin (flat back) of size 550x400mmincluding one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector,including cutting for and pinning in ends of brackets complete all as specified and directed. |
| 88 | S&F in repair, 15 mm bore chromium plated fancy type pillar tap for WHBs with capstan heads, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 89 | S&Fin repair Vitreous China Half Stall urinal flat back, size of 600 x 395 x 365 mm white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) but including connection to flushing pipe and outgoing pipescomplete all as specified and directed. |
| 90 | S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed. |
| 91 | S&F in repair, PVC connection 15mm dia and 450 mm long with 2 Nos PTMT nuts with washerscomplete all as specified and directed. |
| 92 | S&F CP soap dish fixed to wall with screw complete all as specified and directed. |
| 93 | S&F in repair, 15 mm bore chromium plated fancy type long boby bib taps with crutch or buttrfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 94 | S&F in repair, 15 mm bore chromium plated fancy type angle valve with elegant knob screwed down high pressure, with crutch or butter fly handle screwed for iron pipe or for unionscomplete all as specified and directed. |
| 95 | S&F in repair, CP toilet paper holder with flat recessed type stainless steel fixed to walls with chromium plated brass screws complete all as specified and directed |
| 96 | S&F in repair,20 mm dia Aluminium anodised tubular towel rail, D type, 60 cm long between flanges fixed with brass screws complete all as specified and directed. |
| 97 | S&F 600 mm x 450 mmsize beveled edge mirror of selected quality glass, 5.50 mm thick, mounted on 6mm thick AC pain buildingboard or commercial plywood and fixed to wall with wooden plugs and chromium plated brass screws & cup washers complete all as specified and as directed. |
| 98 | M&L for cutting chasing pinning in making good to facing where required for concealed water tubing etc n. exc 10 cm girth in brick wall complete all as specified and directed. |
| 99 | Taking down 15mm bore steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed. |
| 100 | Taking down 20mm bore steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed. |
| 101 | Supplying and laying of 16mmCPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 102 | Supplying and laying of 20mmCPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 103 | Dismantling water tanks exc 500 and not exc 1000 ltrs capacity and removing to store complete all as specified and directed. |
| 104 | S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I complete all as specified and directed. |
| 105 | S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I complete all as specified and directed. |
| 106 | S&F ball valve 20mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. |
| 107 | S & F in repair 20mm bore gate valves with iron wheels head screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 108 | S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm dia and fixed with tinned tacks of galvanized wire staples complete all as specified and directed. |
| 109 | S&F in repair 25 mm outer dia medium weight pipe made out of stainless steel 304 grade, curatin rods tofixed towalls complete all as specified and directed. |
| 110 | S&F in Stainless steel 304 grade clamps with ends/stops etcincluding other accessoriesfor fixingarrangements of25 mm dia curtain rodto wall complete all as specified and directed. |
| 111 | S&F in Stainless steel 304 grade ornamental knobs for side of curtain rods includingfixingarrangements complete all as specified and as directed. |
| 112 | S&F Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, fancy type piller tap connecting union overall size 915mmx460mm with bowl size 410mm x330mm x 160mm complete all as specified and directed. |
| 113 | M&L for Reinforced concrete pipes, class NP2, bore of pipe 150 mm laid and jointed complete with collars complete all as specified and directed. |
| 114 | M&L for cement concrete type C-2 (1:3:6) bed to drain pipes of 150 mm bore including packing under, and hunching against the sides of pipes after they are laid and tested in complete all as specified and directed. |
| 115 | Taking down carefully copper/aluminium point wiring complete (light, fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets ,removing materials to store and offering credit & making good of disturb surfaces of wall/floors etc complete all as specified and directed. |
| 116 | M& L for Point wiring with 1.5 Sqmm(22/0.30mm) PVC insulated andunsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FR type drawn through and including PVC casing caping/ PVC Conduit(ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, coloumns/ beams alongwith 1.5 Sqmm (nominalarea) copper conductor cable (multistranded) PVC insulated and unsheathed as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boardswith sunmica top for mounting switches, sockets, fan Regulators, accessories etc as per site requirement and complete all as specified and directed for the following:- (a)One light point or one fan point controlled by one switch with cables 1.5 sq. mm sizeNote:-Unit rate include for cutting chases for conduits and sinking for boxes andmaking good to wall, floors etc. |
| 117 | All as per ser item No. 116 abovebut for One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire complete all as specified and directed. |
| 118 | All as per ser item No. 116 here in before but for One 5 Amp 5 pin socket outlet point on independent board complete all as specified and directed. |
| 119 | All as per ser item No. 116 here in before but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 5 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to common earth & earth terminals including boards for mounting purposes. |
| 120 | Supply and fixing in replacement switch piano flush button 5 Amp single pole one way 230 volts white finish complete all as specified and directed. |
| 121 | Supply and fixing in replacement of socket outlet flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish complete all as specified and directed. |
| 122 | Supply and fixing in replacement switch socket combination flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish complete all as specified and directed. |
| 123 | Supply and fixing in replacement of switch socket combination multipurpose flush type 2 in 1 type (3 and 5 pin) 5/15 Amps, 230V, AC complete all as specified and directed. |
| 124 | Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp all as per site requirement and as specified and directed. |
| 125 | Supply & fixing exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers including suitable hole in existing wall complete as per site requirement and complete all as specified and directed. |
| 126 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 127 | Supply and Fixing in replacement LED panel light 36 watt efficient LED recessed luminaire 2 ft x 2 ft (>100 Lumen/Watt) to enhance the delight of occupants with comfortable experience through its classic design & glare free soft illumination for armstrong/ grid ceiling or similar ceiling mounting system with concealed complete prewied complete as per site requirement and all as specified and directed.Note : Rate for removing of existing unservieable old luminaire is deem to be included in this item rates. |
| 128 | Supply & fixing in replacement stepped type electronic fan regulator Socket type on the existing phenolic laminated sheet etc. as reqdcomplete all as specified and directed. |
| 129 | Supply and fixing in replacement ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish. |
| 130 | Supply and fixing in replacement of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 10 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note:- (i)Two runs of cables and one run of continuous earting cable drawn in conduit/ casing and caping will be measured as one length of sub main with colour code Red Black and Green. (ii)PVC conduit / casing caping and its accessories is deem to be included in this item rates.(iii) Unit rate include for cutting chases for conduits and sinking for boxes andmaking good to wall, floors etc. |
| 131 | Supply and fixing in replacement SPN distribution board sheet metal enclosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB\"s 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways complete all as specified and directed. |
| 132 | Supply and Fixing in replacement MCB SPN/DP 32 Amp rating 240V, 10KA \"C\" curve complete with connection testing and commissioning complete all as specified and directed. |
| 133 | Supply and Fixing in replacement MCB SP 6 to 32 Amp rating 240V, 10KA \"C\" curve complete with connection testing and commissioning complete all as specified and directed. |
| 134 | Material & Labour in replacement of Earthing complete withgalvanised steel earth plate electrode 60cmx60cmx6 mm thickness buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPMweightnot less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm,excavation and earth work in anytype of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete allto as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion. |
| 135 | NOTES :-1.The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. |
