|
| 1 | Demolition of reinforced cement concrete in ground floors and pavings not exceeding 15cm thick. |
| 2 | Demolition of Brick work built in Cement Mortor of any description. |
| 3 | Dismantling posts or struts ( R.C.C.) any section, including taking out embedded portion and making good disturbed ground. |
| 4 | Surface dressing n exc 15 cm deep Hard / dense soil. |
| 5 | Earthwork excavation in hard/dense soil in trenches width and depth not exceeding 1.50 m and getting out. |
| 6 | Material and labour for sand filling in foundation including watering and consolidation. |
| 7 | Material & Labour for P.C.C 1:4:8, D2 type using 40mm graded aggregated in foundation. |
| 8 | Taking downwindow Shutters of any description but exc 1 sq. m and n exc 2 sq. m each complete all as directed by EIC. |
| 9 | Taking down door shutters withframe or cupboard shutter with frame exceeding 1.50 sqm but not exceeding 4.00sqm each without taking shutter from the frame complete all as directed . |
| 10 | Taking down door shutters withframe or cupboard shutter with frame notexceeding 1.0 sqm each without taking shutter from the frame and handing over the same to CE(E)/Store. |
| 11 | Dismantling floor, earth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 12 | Taking down Cement plastering on brick walls surfaces of any description including raking out joints, hacking for key, scrubbing down with water, etc. |
| 13 | Material and Labour for Providing Anti-termite along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear meter including driling and plugging holes etc in apron complete all as directed by EIC. |
| 14 | Material and Labour for providing Anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors. |
| 15 | Material and Labour for Providing Anti-termite along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear meter including driling and plugging holes etc complete all as directed by EIC. |
| 16 | Material and Labour for providing Anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors. |
| 17 | Material & Labour for R.C.C A1 Type, 1: 1.5: 3 M20, 20mm graded aggregate in foundations, including rafts, footings, column, beam, plinth beams etc. |
| 18 | Material & Labour for R.C.C A1 Type, 1: 1.5: 3 M20, 20mm graded aggregate in columns, pillars, piers, posts and struts etc. |
| 19 | Material & Labour for R.C.C A1 Type, 1: 1.5: 3 M20, 20mm graded aggregate in beams, cantilevers, bressummers, lintels over 1.50m span etc. |
| 20 | Material & Labour for R.C.C A1 Type, 1: 1.5: 3 M20, 20mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc. |
| 21 | Supply and fixing of mild steel reinforcement deformed or twisted bars including bending, cranking, hooking and tieing with mild steel wire not less than 0.90mm dia. Use RINL-VIZAG Steel/SAIL/TATA-TISCON/\"BIS\"MARKED or Suitably equivalent make. |
| 22 | Supply and fixing of twisted MS Bars 6mm dia up to 8mm dia cut to length bent to shape required including cranking, bending, spiraling for hoping for columns, hooking ends and binding with MS Wire not less than 0.9mm dia or securing with clips. |
| 23 | Material & Labour for form work to side of RCC Member such as columns, pillarsetc., and the finishing shall be of fair finished surface. |
| 24 | Material & Labour for form work to flat surfaces sides and soffits of floor or roof beam, beam, lintels, cantilevers, shelves, columns, slabsincluding supports, overhangs etc., and the finishing shall be of fair finished surface. |
| 25 | Material & Labour for form work to soffits surfacesof suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) and the finishing shall be of fair finished surface. |
| 26 | Material & Labour for Brick work built inCM.1:6 using Good quality modular bricks / solid Concrete bricks. Straight or Curved on plan exc 6m meanradius. |
| 27 | Material & Labour for half Brick wall built inCM.1:4 using Sub-Class “B” Bricks. |
| 28 | Material & Labour for plastering in CM 1:4, 15mm thick on fair faces of brick work and concrete surfaces. |
| 29 | Material & Labour for plastering in CM 1:4, 12mm thick on RCC Ceiling. |
| 30 | Material and labour for Dubbing out average 10mm thickin C.M 1:4 on irregular face of walls (when specifically ordered in writing). |
| 31 | Excavationof moorum/red bajiri from borrow pits for floors or pavings, Removal of excavated soils lead exceeding 1.50 km but not exceeding 5 km and depositing where directed and refilling of hard/dense soil including spreading, laid in layers n exc. 15 cm thick leveling, watering and well ramming in layerswhere directed. |
| 32 | Material and labour for cement concrete 1:2:4 Type B1 20mm graded aggregate in foundation filling and mass concrete. |
| 33 | Supply & Fixing of Ist class hard wood door frame, wrought framed rebated on the solid rounded or chamfered put together with glue pined at joints. |
| 34 | Supply & Fixing of plain, framed, paneled door shutters 40mm thick made out of IInd class hardwood. |
| 35 | Supply and fixing of holdfast made out of 25 X 6 mm flat fixed to window frame. |
| 36 | Material & Labour for Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar workexc 15 cm but not exc 30cmin width or girth; including cutting to edges, all mitres and stopped ends,etc. |
| 37 | Material & Labour for painting to wooden surfaces of any description over 10cm width or girth with two coats of synthetic enamel paint over a coat of primer including preparing new wooden surfaces. |
| 38 | Material and labour for applying two coats of exterior emulsion on external wall surfaces (two storey building) including preparation of old surfaces all complete. |
| 39 | Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose. (a)Area not exceeding 2.00 Sqm each) and as approved and as directed. |
| 40 | Supply & Fixing of sheet Glass 5.50mm quality and glazing with oil putty in square exc 0.5Sqm in each pane ground or obscured or tinted on one side and as approved and as directed by EIC. |
| 41 | Material & Labour for applying two coats of plastic emulsionon internal wall surfaces including preparaition of old wall surfaces complete all as directed. Make: Asian (apcolite advanced) / Berger (Easy clean) / Nerolac (Impressions 24 carat) or suitably equivalent make). |
| 42 | WALL PUTTY: Material and labour for applyingone coat of primerandtwo coat of white cement based wall care putty in walls / ceiling of 3mm thick inculding removal ofloose / peel off existing treatment if any and as specified in SSR 2020 part-I specification clause 15.19.1 to 15.19.6.4 (Make shall be of JK white putty or Birla white wall care putty or Similar Equivalent make). |
| 43 | Material & Labour for Vitrified Ceramic tiles Dark Shade 10 mm thick in Floors (Square /Rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bedding 1:4, 15mm thick for laying floor finishes. |
| 44 | Material & Labour for Vitrified Ceramic tiles DarkShade 10 mm thick in wall surfaces(Square / Rectangular) polished, area of each tiles not exceeding 0.36 sqm etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bedding 1:4, 15mm thick for laying wall surfaces. |
| 45 | Material & Labour for cement paint two coats over a coat of primer paint on newly prepared wall surfaces. |
| 46 | Material and Labour for forming jambs using CM 1:4to opening including cutting, toothing and also facing, jointing and pointing to match existing work complete. |
| 47 | Supply & Fixing of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. Fe-410-W(Gde-E-250)quality A. |
| 48 | Supply, Fabrication and Fixing of Steel work in tubular trusses including special shaped washer etc., complete using ERW or induction butt weldedtubes conforming to I.S.1161- 1979 grade St-240. |
| 49 | Material & Labour for painting to steel surfaces of any description over 10cm width or girth with two coats of synthetic enamel paint over a coat of Red oxide primer including preparing new surfaces. |
| 50 | Material & Labour for white washingtwo coats on ceilingon newly prepared wall surfaces. (ASIAN / NEROLAC / BERGER) or Suitabaly Equivalent Make. |
| 51 | Removal of excavated soils exceeding 250m but not exceeding 500m and depositing where directed. |
| 52 | Returning / refilling of soil / loose including spreading, leveling, watering and well ramming in layers not exceeding 25cm. |
| 53 | Cuttingholes in brick walls built in cement mortar Exc.half brick work but not exc.one brick for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required. |
| 54 | Supply and Fixingof solid PVC frame (single rebated) of size 60mmx30mm made out of solid PVC foam with Homogenous fine cellular structure having smooth outer integral skin with suitable stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and as shown on drawing (Note: Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) etc., all complete and as directed for ventilator frame and windows shutters styles and rails. |
| 55 | Supply and fixing of 30 mm thick factory made single extruded WPC (wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of k value 58-60 (suspension grade). Calcium carbonate and natural fiber (wood power) / rice husk / wheat husk and non toxic additives (maximum toxicity index of 12 for 100 mgs) having minimum density of 650kg/cum, screw withdrawl strength of 1800N (face) & 900N (edge)minimum compressive strength of 50N/mm2, modulus of elastity 850N/mm2 and resistence to spread of flame of class A category with property of being termite / borer proof. water / moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star head counter sunk SS screws, all as per direction of EIC. |
| 56 | Supply and Fixing of Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as direced by EIC. |
| 57 | Material and Labour for Providing edge moulding for Granite stone of 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc., complete. |
| 58 | Supply and Fixing of Stainless steel Handle of Size 300mm including necessary screws etc., complete. |
| 59 | Supply and Fixing of Stainless steel Handle of Size 200mm including necessary screws etc., complete. |
| 60 | Supply and Fixing of Stainless steel Handle of Size 150mm including necessary screws etc., complete. |
| 61 | Supply & Fixing Continuous (piano) hinges 30mm, mild steel, bright finish or electro-galvanised. |
| 62 | Supply & Fixing of Water proof Plywood of thickness 18mm including necessary adhesives etc., complete. |
| 63 | Supply & Fixing of white / half white laminated sheet of thickness 0.6 mm. Fixed on both sides of plywood including necessary adhesives etc., complete. |
| 64 | Supply & Fixing of PVC Edge Band 1.00 mm Thick around the edges of shutter. |
| 65 | Supply & Fixing of 200mm Aluminium anodized barrel tower bolt. |
| 66 | Supply & Fixing of 150mm Extruded aluminium alloy handles, fabricated type, anodised |
| 67 | Supply and Fixing of Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as directed by EIC. |
| 68 | Providingand fixing Counter sunk wash basins, waste coupling. Cost including ofproviding and fixing of bottle traps, angle valve, Teflon tape etc., complete as directed by the architects. Make : GUAR / KOHLER / DURAVIT or suitably Equivalent Make. |
| 69 | Supply & Fixing of Vitreous China IWC Squat pan (Orissa pattern) Size 580 x 440mm white / colour with integral foot rests including lime concrete bed and finishing etc., with 10 litres flushing tank wirh all accessories. |
| 70 | Supply & Fixing of Bib Taps, 15 mm cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule fancy type and chroumium plated. |
| 71 | Supply and Fixing of 15mm swan neck chromium plated sink cock of Make: ESS ESS, Jaguar, Parryware or Suitably Equivalent Make. |
| 72 | Providing and fixing in position Toilet wall mounted Coupled closet including soft seat cove, concealed flush tank etc., Make: Jaguar / Kohler / Duravit or suitable equivalent make. |
| 73 | Diverter with hand shower and rain shower of 200mm dia. |
| 74 | Supply and Fixing of Angle cock (15mm) with pipe. Make: Jaguar / Kohler / Duravit or suitable equivalent make. |
| 75 | Supply and fixing of Health facet chromium plated. Make: Jaguar / Kohler / Duravit or suitable equivalent make. |
| 76 | Supply and fixing of towel rake. Make: Jaguar / Kohler / Duravit or suitable Equivalent make. |
| 77 | Supply and Fixing of vitreous china wash basin 580 x 450including pillar cock 15mm dia waste chain and plug 32 mm dia and porcelian stopper and removal of old one from thesite. |
| 78 | Supply and fixing of cast copper alloy screwed down, high pressure stop cock / angle cock fancy type chromium plated concealed type of size 15mm. |
| 79 | Supply and Fixing of chromium plated cast copper alloy bib cock of size 15mm. |
| 80 | Supply and Fixing of 600x450 mm bevelled mirror of selected quality glass mounted on commercial ply wood 6mm thick and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 81 | Supply and fixing of PVC(SWR) pipe 110mm bend. |
| 82 | Supply and fixing of PVC(SWR) pipe 75mm bend. |
| 83 | Supply and Fixing of PVC(SWR) pipe of 110mm dia laid in trenches or in walls including all fittings complete as directed. |
| 84 | Supply and Fixing of PVC(SWR) pipe of 110mm dia laid in trenches or in floors including all fittings complete as directed. |
| 85 | Supply & Fixing of PVCfloor trap 75mm dia outlet with grating and connecting PVC extension pipe including jointing with solvent cement etc., complete |
| 86 | Supply and fixing of tubular towel rail 20mm D type 60cm long of aluminium anodized and including chromium coated brass screws and wooden / plastic cleats. |
| 87 | Supply and fixing of soap dish fixed to plugs with chromium plated brass screws. |
| 88 | Supply and Fixing of Swivel Shower of PTMT of any colour for fixing with 15mm pipe (minimum weight 40 gms). |
| 89 | Material & Labour for applying Chalk powder putty for wooden surfaces including neccesary smooth finish, etc. complete |
| 90 | Supply & Fixing of IInd class hardwood 35mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers. |
| 91 | Supply and Fixing of CPVC pipe 32 mm SDR11 & plain CPVC SDR 11 Fitting on concealed walls / ceiling or laying in floor complete all as specified. |
| 92 | Supply and Fixing of CPVC pipe 25 mm SDR11 & plain CPVC SDR 11 Fitting on concealed walls / ceiling or laying in floor complete all as specified. |
| 93 | Supplying and Fixing of PVC (SWR) gully trap 125/110 mm, setting and jointing with neat cement solvent. |
| 94 | Supply & Fixing of 125mm Aluminium Butt hinges, extruded aluminium alloy anodised and fixed, type B-21. |
| 95 | Supply and Fabricating of Steel rolling shutters of 1.25mm thickness of lathswithout ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type. |
| 96 | Supply and Fixing of Safety lever locks mild steel with 4 levers for rolling shutters. |
| 97 | Supply and Fixing of Ball bearing for rolling shutter. |
| 98 | Material & Labour for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth. |
| 99 | Supply and Laying of CPVC pipe 20mm dia pipes SD 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. |
| 100 | Supply & Fixing of 20mm dia High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. |
| 101 | Supply and Fixing of Aluminium handle fabricated type 100mm length. |
| 102 | Demoiltion of(unreinforced) Cement Concrete / Lime Concrete with brick tiles etc., show to mother concrete slab,of any description and in any position not otherwise specifically provided for and removing Rocks debris from roof to part there of beyond 500 m and upto total distance of not exceeding 1.50 Km and as approved by EIC. |
| 103 | Material and labour for cutting out wall cracks to V-section in existing roofs or terracing and walls etc., Taking down plastering / cement dado / terazzo or cement lime plaster, cleaning out and application of Polyurathene based sealant for filling of wall cracks upto 20mm width and 10mm depth .PU Sealant material shall have elongation more than 700 %, wetting of any description, grouting rag bolts or rag angle iron service bracket, Hexagonal Chicken wire Mesh Galvanized with wire nail and making good with cement mortar 1:3 including making good finishing to match the existing work Before wall plastering tie to chicken wire mesh using nail and as approved by EIC. |
| 104 | Supply of liquid water proofing compound for plastering in wall / roof surfaces. The make of liquid waterproofing compound should be got approved by E-I-C. |
| 105 | Removal of existing old damaged Bitument felt layer including removing of all resuidal bitumen and primer including of all traces using hand buffing machine / mosaic polishing machine and depositng the removed materials to a distance not less than 1 Km. |
| 106 | Supply and application of Polyurethane based sealant for filling of visible cracks up to 10mm width and 5mm depth. PU sealant material shall have elongation more than 700%. The contractor shall use Hyperseal expert 150 of Alchemica / Seal Arm PU of MYK Arment / SNF one plus P590 of Bostik / Masterseal NP 473 U of Master Builders Solutions / Cipoxy 16 D of Dr.Fixit , or Suitably Equivalentmakesare only acceptable as approved by EIC and finishing the top surface. |
| 107 | Supply and application of seamless Polyurethane (PU) based elastomeric coating exposable to atmosphere. The workconsisting:-a) Supply & Application of PU based primer minimum of 100gms per SQM.b) supply and application of seamless PU based elastomeric coating over aprimer coat to achieve a thickness of 1.5 mm DFT in two coats, with an application rate of minimum 2.1 kg/Sq.M, having minimum solid content (ASTM 836) of more than 85% and elongation also more than 400%.c) Supply & Application of Protective UV top coat@ 0.25 kg/sq.m.(The Contractor Shall use the material from the reputed manufacturers such as \"Master Builders Solutions\", \"MYK Arment\", \"Dr. Fixit\", \"Alchimica\",\"Bostik\", \"Tecnopol\" or suitably Equivalent makes are only acceptableand as approved by EIC). |
| 108 | Disconnection of existing tanks Exc 500L & not Exc 1000L, setting aside (or lowering if required) for repairs, cleaning, etc., and hoisting if required reconnectiing and re-fixing in position. |
| 109 | Material and labour for Point wiring with FRLSPVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduit accessories run on wall or roof including M.S. switch box concealed in the wall (made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc., mount on a wall / roof etc., including copper earth continuity wire (same size of phase wire). Make:Finolex/Orbit /Havells/ polycab or Suitable equivalent make.a)one light /fan/Bell push point controlled by one switch with cables1.5 sqmm size. |
| 110 | Material and labour for Point wiring with FRLSPVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduit accessories run on wall or roof including M.S. switch box concealed in the wall (made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc., mount on a wall / roof etc., including copper earth continuity wire (same size of phase wire). Make:Finolex/Orbit /Havells/ polycab or Suitable equivalent make.b)One 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sqmm size. |
| 111 | Material and labour for Point wiring with FRLSPVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduit accessories run on wall or roof including M.S. switch box concealed in the wall (made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc., mount on a wall / roof etc., including copper earth continuity wire (same size of phase wire). Make:Finolex/Orbit /Havells/ polycab or Suitable equivalent make.c)One 3 pin socket outlet 5 amps independent, with cables 2.5 sqmm size. |
| 112 | Material and labour for Point wiring with FRLSPVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduit accessories run on wall or roof including M.S. switch box concealed in the wall (made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc., mount on a wall / roof etc., including copper earth continuity wire (same size of phase wire). Make:Finolex/Orbit /Havells/ polycab or Suitable equivalent make.d)One light point controlled by two2-way switches with cables 1.5 sqmm size. |
| 113 | Supply & fixing of switch piano, flush type single pole one way 6 amps.(Make: ANCHOR / LEGRAND/ HAVELLS or Suitable equivalent make) |
| 114 | Supply & fixing of switch piano, flush type single pole one way 16 amps.(Make: ANCHOR / LEGRAND/ HAVELLS or Suitable equivalent make) |
| 115 | Supply & fixing of Socket outlet 3 pin, 6A, flush type (Make: ANCHOR / LEGRAND/ HAVELLS or Suitable equivalent make) |
| 116 | Supply &fixing of socket outlet two in one, three pin , 6 and 16 amp Flush type (Make: ANCHOR / LEGRAND/ HAVELLS or Suitable equivalent make) |
| 117 | Supply & fixing of bell push, flush type, 5 amps (Make: ANCHOR / LEGRAND/ HAVELLS) or Suitable equivalent make. |
| 118 | Supply and fixing of buzzer ding dong type AC 230 Volts single pole. (Make:Anchor/Havells/ Orbit or Suitable equivalent make) |
| 119 | Supply & Fixing of wiring for circuit / sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable along with PVC conduit and conduit accessories in surface/recessed as required . (Make:Finolex/ Orbit / Havells/ polycab or Suitable equivalent make)a) 2x2.5sqmm + 1x2.5sqmm earth wire |
| 120 | Supply & Fixing of wiring for circuit / sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable along with PVC conduit and conduit accessories in surface/recessed as required . (Make:Finolex/ Orbit / Havells/ polycab or Suitable equivalent make)b) 2x4.0 sq.mm+1x4.0 sq.mm earth wire |
| 121 | Supply & Fixing of wiring for circuit / sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable along with PVC conduit and conduit accessories in surface/recessed as required . (Make:Finolex/ Orbit / Havells/ polycab or Suitable equivalent make)c) 2x6.0sqmm + 1x6.0sqmm earth wire |
| 122 | Material & Labour for ceiling rose, 3 Phase / PVC / polycorbonate, isolated body. (Make: ANCHOR / LEGRAND/ HAVELLS or Suitable equivalent make) |
| 123 | Supply & fixing sheet metal enclosures for DB\"s when MCBs to be use, single pole and neutral, 8 way with 200 amps rated bus bar, Double door. (Make: STANDARD / LEGRAND / HAVELLS / Schneider or Suitable equivalent make). |
| 124 | Supply and fixing of SPN 40 to 63 AMP (double pole) rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. (Make: STANDARD / LEGRAND / HAVELLS / ABB / Schneider or Suitable equivalent make). |
| 125 | Supply and fixing 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. ( Make: STANDARD / LEGRAND/ HAVELLS / ABB / Schneider or Suitable equivalent make). |
| 126 | Supply & Fixing of stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required (Make: ANCHOR / LEGRAND / HAVELLS or Suitable equivalent make). |
| 127 | supply & fixing of lamp holders PVC / polycorbonate type with cord grid cap suitabile for pendant / straight / slanting fittings. (Make: Anchor / Havells / Orbit or Suitable equivalent make). |
| 128 | Material and labour for Brick walls cutting chases, pining in, making good to facing where required and pointing in cement mortor 1:3 to ends and cutting chases for concealed conduit wiring, etc.,and making good, cutting exc. 10 cm but not exc. 20 cmgrith. |
| 129 | Supply, Fixing & Connecting of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20AMP (Make: Legrand / Havells / Anchor / Orbit or Suitable equivalent make). |
| 130 | Takingdown Aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc., removing materials to store for keeping in safe custody for taking credit and making good disturbed surfaces of wall, floors, etc. |
| 131 | Supply & fixing of LED light fitting 1x9W / 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.(Make: Philips / Wipro / CG / Havells / C&S or Suitable equivalent make). |
| 132 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make: PHILIPS / CG / Havells / Wipro or Suitable equivalent make. |
| 133 | Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Make: PHILIPS / CG / Havells / Wipro / Klite / Bajaj / Luker or Suitable equivalent make. |
| 134 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), IS 374-2019. Make: Crompton - Energion Riviera / Atomberg - Renesa Alpha / Havells - Efficiencia Neo/ Orient - Hectre 500 or suitably equivalent make. |
| 135 | Supply and fixing Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m (Make: Almonard / Kaitan / Crompton or Suitably equivalent make). |
| 136 | Supply and fixing Exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers (Make: Almonard / Kaitan / Crompton or Suitably equivalent make). |
| 137 | Supply and fixing of electric water heater, storage type steel / plastic body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated, 8 bar pressure, complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. (Make: Wipro / Havells / Racold or Suitably equivalent make). |
| 138 | Excavating in trenches Hard / Dense soil not Exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying cable. |
| 139 | Material & Labour for sand filling for cushioning on U.G cable. |
| 140 | Materal & Labour for Bricks; common burnt clay building bricks sub class B designation 75, Old size bricks for protection to U.G cable. |
| 141 | Returing, refilling of Hard / Dense soil in the excavated trench after laying of power cable including spreading levelling, watering and well ramming in layers not exc 25 cm. |
| 142 | Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided for. |
| 143 | Supply & fixing of galvanised steel tubes, medium grade 80mm dia. |
| 144 | Material & labour for cement concrete 1:2:4 Type B1 using 20mm graded aggregate in foundations, filling and mass concrete. |
| 145 | Supply, laying or fixing with suitable clamps or passing through pipe,PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 50 sqmm, 3.5core. |
| 146 | Supplyand fxing of LED decorative wall mounting fitting complete with suitable LED lamp and accessories, Wattage not more than 15 watts and minimum system output 1000 lumens. Make: PHILIPS / Bajaj / CG / Havells / Wipro / Luker or Suitable equivalent make). |
| 147 | Supply, fixing & connecting of the system cable end termination of size 50 sqmm 3.5 core including with suitable cable gland & lugs. |
| 148 | Supply and installation of kitchen chimneys 600 mm wide with auto clean facility and suction power of minimum 1200 CFM along with exhaust pipe upto 5 mtrs.Make: FABER / GODREJ / ELLICA or Suitable Equivalent make. |
| 149 | Supply, fixing and connecting to the system Piano type switches 6A single pole 2way. (Make: ANCHOR / LEGRAND / HAVELLS or Suitable equivalent make). |
| 150 | LESS CREDIT: Dismantled item of copper / Aluminium point wiring complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, etc. |
