Tender For Construction Of 02 Nos. Of Type-Vi Quarters At Avnl Estate, Thiruvallur-Tamil Nadu

TDR : 51396727

Tender Notice
Corrigendum Details
BOQ

Expired

Thiruvallur , Tamil Nadu

Tender Brief : Corrigendum : Tender For Construction Of 02 Nos. Of Type-Vi Quarters At Avnl Estate

Document Fees
Refer document

EMD
₹ 555000.0 /-

Tender Value
₹ 4.80 Crore /-

Submission Date
28-10-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	17-10-2025	Corrigendum to Critical Dates	Date	28-10-2025
2	07-10-2025	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	21-10-2025

Name of Work: CONSTRUCTION OF 02 Nos. of TYPE - VI QUARTERS AT AVNL ESTATE

Sl. No.	Item Description
1	Demolitionof Existing old dilapilated building of any size , shape of any material and removing the Serviceable useable materials seperately by dissmantling without making any damage and handing over the same to CE Estate store and demolshing the brickwork , concrete etc., and clearing the rubbish including the foundation part copletely without leaving any construction materials below the ground level. The rate is inclusve of shifting the debris to al lead exceeding 1.5 Km from the site and dumping , the materials at the low lying area including levelling the surface after dumping to have a uniform levellled surface.
2	Demolition of Brick work built in Cement Mortor of any description
3	Demolition of Reinforced CementConcretein of any thickness including plastering
4	Demolition of Unreinforcedcementconcrete in of any thickness including plastering
5	Dismantling structural steel work including doors, windows, ventilators, gates but excluding framed truss etc and handing over to CE store.
6	M & L for cutting down the branches and Grubbing up tree trunk including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site (girth exc 30 cm and n.exc. 100cm)
7	Surface excavation in Hard/Dense soiln.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out
8	ObtainingReports for Soil investigationincludes geotechnical investigation for the proposed project site to determine subsurface soil conditions for structural foundation design, based on the attached plan and elevation and structural Drawing should be provided by contractor .all as specified and directed.
9	Earthwork excavation in hard/dense soil in trenches width and depth not exceeding 1.50 m and getting out
10	Earth work excavation in trenches exceeding 1.5m and not exceeding 3.0 min width and depth and getting out in hard/dense soil.
11	Excavating in post holes in Hard/dense soils (or similar holes) each n exc 0.5 cu.m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm.
12	Material and labour for sand filling in foundation including watering and consolidation.
13	M & L for P.C.C 1:4:8, D2 type using 40mm graded aggregated in foundation.
14	M & L for filling of moorum/red bajiri in floors or pavings, laid in layers not exceeding 15cm thick, spread, leveled and rammed including watering where directed.
15	Material and labour for post constructional anti-termite treatment along the external wall and below concrete or masonry apron using chemical emulsion at 2.25 liters per linear meter including drilling and plugging holes etc., in apron. chloropyriophos emulsifies concentrates conforming to IS8944-2005 shall be used as per concentration indicated in IS code.
16	Material and Labour for anti-termite treatment of voids in masonry using chemical emulsion(chloropyriophos) one litre per hole at 300mm intervals inculding drilling holes at 45 degree and replugging them with cement mortar1:2 to match the existing floor or wall.work is to be perfomed in inside buildings. one hole on the intersection of wall and floor and other on the wall above 300mm from thefloor as directed.chloropyriophos emulsifies concentrates conforming to IS8944-2005 shall be used as per concentration indicated in IS code.
17	M & L for providing RCC M25 Concrete (1:1.5:3) inFoundations, including rafts,footings,foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete
18	M & L for providing RCC M25 Concrete (1:1.5:3) inColumns, pillars, piers, posts and struts
19	M & L for providing RCC M25 Concrete (1:1.5:3) inBeams, cantilever bressummers, lintels over 1.5m span
20	M & L for providing RCC M25 Concrete (1:1.5:3) inSlabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
21	M & L for providing RCC M25 Concrete (1:1.5:3) in chajjas
22	M & L for Formwork Flatto sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter Add to Fair Finished surface
23	M & L forFormwork Square/Rectanglurto sides of pillars, posts, struts, piers, columns and stanchions Add to Fair Finished surface
24	M & L for Formworkflat to floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and Add to Fair Finished surfacebeams, etc.
25	M & L for Formwork to flat soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) Add to Fair Finished surface
26	M & L for Formwork to flat chullah hoods, chajjas, troughs and similar items to Fair Finished surface including edges
27	Material and labour for flat Formworkto fins, louvers, fascia, Percola including fair finished surface.
28	Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, Bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
29	Supply and fixing of mild steel reinforcement TMT bars 8mm dia to 6 mm diaincluding bending, cranking, hooking and tieing with mild steel wire not less than 0.90mm dia.
30	Material and labour for precast cement concrete B-0 type (1:2:4) 12.5 mm aggregate jallies 35 mm thick and set in cement mortar 1:6.
31	M & L for Glass strips of 3mm thick inserted in position width of strip22mm
32	Supply of liquid water proofing compound
33	M & L forDamp proof course in CM 1:2:4 type in 40 mm thick B0 tohorizontal or verticalsurfaces including necessary formwork
34	Material and labour for precast cement concret type B1 1:2:4 20 mm gradedaggregate set in cemtn mortar 1:4 in landings , cover slabs, manholes, chullas hoods, chajjas water groughs, mangers, shelves and similar articles with plain faces
35	M & L for Cutting chases, pinning in. making good to Brick work / concrete facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth
36	M & L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built In cement mortor 1:6
37	M & L for half Brick wall built inCM.1:4 using Sub-Class “B” Bricks.
38	Material & labour for plastering with CM(1:3) 12mm thick celling plastering
39	M & L for plastering in CM 1:4, 15mm thick on fair faces of inner brick work, concrete surfaces and Door & Window Jamb plastering.
40	S &F of Pre-cast cement concrete block Type-1 B1 1:2:4 20 mm aggmasonry with solid blocks, exc. 10 cm in width and setting in mortar, complete.
41	M & L for Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels,cornices, skirtings, drip moulds and similar work not exc 15 cmin width or girth; including cutting to edges, all mitres and stopped ends,etc.
42	Material and labour for cement concrete 1:2:4 Type B1 20mm graded aggregate in foundation filling and mass concrete.
43	M & L forPavement quality concrete(PQC) of minimum 28 days field Flexural strength of 45Kg/ Sqcm or 4.5 Mpa, aggregate gradation as per Table 3 of IRC 15- 2017, coarse aggregate of clean, hard strong, dense, non-porous and durable pieces of crushed stone or gravel, fine aggregates of clean natural sand or crushed stone sand or combination of both using minimum 360 kg/cum of cement with non-circular, virgin synthetic fibre of 12-18 mm length, specific gravity 1.34 to 1.39, UV stable, alkali resistant, with equivalent dia 15-40 micron, minimum melting temperature as 240°C and minimum tensile strength of 300 Mpa and at the rate as specified by the manufacturer. PQG laid, spread and compacted with slip-form paver of minimum 7.50 m width, including curing and tining by Texturing cum Curing Machine complete all as specified and directed. Required surface texturing to be done as specified in Glau3e 10 1 14 and Table 9 of IRC\" 15-2017
44	Formation of surface by power roller (Exc 8 but not exceeding 12T) for consolidating surfaces in cutting.
45	Material and Labour for Laying and compacting 150 mm thick (compacted thickness) Granular Sub Base Course (GSB) grading as per Grade I as specified Table 400-1 of MoRTH specifications for Road and Bridge works, 2013, in a single layer over compacted subgrade with natural sand, crushed gravel, crushed stone, crushed slag, or combination thereof as per the grading required The materials are mechanically mixed, spread and leveling on the subgrade by using motor grader of adequate capacity, and rolling with vibratory roller of capacity 80-100 KN static weight for achieving required compaction density of atleast 98% of the Maximum Dry Density. Consolidating to required gradient and camber complete all as specified and directed with finished surface tolerances as per Table 900-1 of MoRTH specifications for Road and Bridge works, 2013.
46	M & L for Laying and compacting 150 mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as per table 400-13 of MoRTH :specifications for Road and Bridge works 2013 manufactured in WMM plant, material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100KN static weight and consolidating to required gradient and camber complete all as specified and directed The finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013
47	Supply and laying 400 micron thick HDPE sheet (VIRIGIN QUALITY) water proof wrinkle free without puncture having minium weight 390gm/sqm over tack coat /sand cushion as specified in the design with over lap between adjacent strips and at transverse joint as minimum 300 mm.
48	Material and Labour forForming 25 mm width expansion joint in concrete slab for full depth of PQC. Early entry saw and subsequent cutting by using diamond bit cutter of appropriate size, straight and smooth edges. Joint cleaned thoroughly with application of compressed air. Joint shall be made dry, vacuum cleaned and free of dirt, oil, vegetation and other debris. The joint then filled with pre-molded 25 mm thick compressible polyethylene closed cell type filler board as specified, thereafter application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before placing the backup rod and pouring the sealant. Placing of closed cell, medium density, crossed linked polyethylene foam backup rod of 30 mm dia, over filler board and filled with polyurethane based sealant complying with BS- 5212, BS 4254 and EN-141gzc-2003 with minimum movement accommodation factor (MAF) of+/- 30% having minimum 10 year performance guarantee, applying masked tape on the edges of joints and removing the masking tape after filling of sealant as per the method specified by the manufacturer complete as specified and directed
49	M & L for Virified Ceramic tiles (Dark shade/Double charged / Ultracharged) 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors/wall etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bedding 1:4, 15mm thick for laying floor finishes with for joint free
50	S& F ofNon - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match., including Screed bedding 1:4, 15mm thick for laying floor finishes with for joint free non skid tiles
51	S& F ofNon - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match., including Screed bedding 1:4, 15mm thick for laying floor finishes with for joint free non skid tiles.
52	S& F of Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointedin white or colour cement to match include for joint free non skid tiles.
53	M & L for Glazed Ceramic Coloured tiles of size 300x 200 x 7mm thick on vertical faces, set and jointed in neat cement slurry and pointed out in white or coloured cement to match as required at site on walls includingjoint free non skid tiles for fountain survent
54	Supply and fixing of Cement concrete Tiles 20cmx20cmx20mm thick with grey cement and pigment machine pressed with screed bed or bedding layer in CM 1:3 , 15mm thick and pointed in neat ceemnt slurry in floors and cut polished.
55	Material and Labour forGl frame work for seamless ceiling comprising of Gl perimeter channnel (605 x 605mm)0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.
56	Material and labour for Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to curved with sunk or raised moulding surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately)
57	Material and Labour for providing cornice to the false ceiling at the corners of 15cm width and apply neeru finish/putty and one coat or primer and two coats of plastic emulsion complete ad directed by EIC.
58	Providing and fixing solid First class Teak wood door and wire mesh shutterr on bothsides pf thewooden door frames of size of 8\" x 4\" with teak wood designer beeding wide 6\"x 20mm thick around the frame ,Providing one side with 40 mm door thick panelled Shutter double leaf with engraving as directed and other side40 MM thick single leaf wire mesh shutter with panels as directed,Size of the Door shall be ( 3 1/2\"x7\") with 5 No\"s of 5\" door Brass hinges,300 mm ornamental brass handles four nos on panelled shutter and two nos on wire mesh shutter, requireddouble spring door hinges for wire mesh shutter, Brass tower bolts 200mm two numbers for each shutter, 450mm Brass Aldrop bolt one number and 250 mm brass aldrop for wire mesh shutter,with150 mm Brass Door stoper on each shutterthe Mesh shall be of 0.36mm nominal dia of wire and avarage width of aperture 1.40mm Stainless steel grade 304 ,and finished with one coat of wooden seelar andtwo coat of wooden polish matt/Glossy finishas directed.
59	S & F of II class hard wood door frame, wrought framed rebated on the solid rounded or chamfered put together+B61with glue pined at joints.
60	S & F of design plain, framed, Flushdoor shutters 40mm thick Factory made of II class hardwood with decorative venner on both sides and fixing to Wooden frame.
61	S & F ofFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applyingPVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).
62	S & f of Providing and fixing factory made single extrudedWPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
63	S & F of 200mm Brass barrel towerbolts, with cast or sheetbarrel and rolled or cast bolts and fixed .
64	Supply & fixing of 150mmBrass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed.
65	S & F of 125mm butt hinges, Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11
66	S & F of 150mm Brass handles, cast type, polished bright
67	S & F of 150mm decorated brass handles,fabricated type polished.
68	S & F of 150mm cylindical lock ,fabricated type polished.
69	Supply and Fixing of Brass 4 levers Mortice lock verticaltype of Size 100mm
70	S & F of 300 mmBrass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed
71	Supply and fixing of holdfast , Bands, straps, supports or staysfor rainwater, ventilating pipes,including bolts, if required:hooks (stay), heavy, for largegates; hook and pintle hinges:large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks forhanging fans; plain angle cleatsfor securing purlins to wood trusses or rafters; knee piecevinserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165
72	Supply & Fixing of 150 mm Double action spring hinges Blank hinge, brass, bright polished, for usealongwith brass double action spring hinges
73	Supply & Fixing of door closer hydrauliclically regulated, designation no.1, universal type, suitable for door shutters upto 700mm in width and of weight not more than 35 kg and fixed with aluminium (extruded section body)
74	Supply and fixing of brass door stopper 150mmof aluminium body and tongue anodised with harddrawn steel spring fixed in floors.
75	S & F of Magic Eye (Lens) in doors including drilling hole in Door and fixing in position all complete
76	S & F of Ferio Zinc 6 pin Hook clother hanger door wall hook rail for hanging cloth Brass/Antique as director
77	S & F of Magnetic door Cather stopper holder Brass/Antique
78	S&F of Weather Stripping Door Bottom Sealing Strip used for sound proof doorguard, stop outside dust hot air,Insects size 39\" large as directed
79	Providing and fixing factory made UPVC white colour casement (Openable) window made of extruded profiles with wall thickness 0f 2.3mm (+-0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 58mm), sash (60mm x 73mm), T Profile (One vertical length in between two shutters) (60mmx 74mm). Glazing bead (35mmx20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing of hardware, EPDM gasket. 1.2 +- 0.2mm thick, galvanised steel frame (28mm x 21.5mm), sash (31mm x 27.5mm), T Profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners.Hardware :[casement handle made of zinc alloyed (white powder coated). But hinges of zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories.Net opening will be measured for payment purpose). Area exceeding 2.00 Sqm each
80	Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusionwelded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approvedquality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately)
81	S & F of 5.5mm Sheet glass, ordinary quality and glazing rubber beading with in square exceeding 0.5 sq. m in each pane as required for the aluminium partition.
82	S & F of Solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers
83	Providing and fixing of Glass Flim stickering ofGeneric Forest landscape,any scenery,god /goddes etc.,as approved and as directed. withwarranty as per the manufacturer specification and instructions.
84	S & Fixing of 20 mm Stainless Steel curtain Rod
85	S & Fixing of20 mmFerio Curtain Rod Holder Heavy Double Brass Curtain Support Bracket Antique/Brass Finish used to Door & Window Bracketwith necessary fittings.
86	S&f of Aluminium Hollow Section frame(size 50m x25mm x1.2 mm thick) with shutter for 7\" Door( size 40mm x12mm)/ 1.8\" windows(size 25mm x12mm) with Mosquito Proofing ( SS Wire mesh 0.36mm nominal dia of wire and avarage width of aperture 1.40mm and fixing with stainless steel wire staples and size 16mmx9mm rectangular hollow sections with necessary corner brackets),intermediate sash bares etc all complete and as directed.
87	M&L for Granite (of any type) work(table rubbed and polished)20mm thickfor wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite
88	Supply and Fixing of granite(of any colour) work (table rubbedand polished) 20mm thick to fixing on wash basin platform, in steps, jambs, pillars, window-cills, cooking platformsincluding machine cutting suitably to fix the wash basin incluing nosing of inner nd outer edges in CM 1:4 including pointing in white cement(1:2) using marble dust with admixture with shade of granite complete as directed.
89	Supply and fixing Step Stone Vitrified Tiles used for staircase steps(Tread 300 mm x 1200 mm x 10/12 mm) and (Riser 200mm x1200mm x10-12 mm) with Self Embosed Grooves Bull Nose Finish ,Anti Skirt Property ,Porecelain Full Body Vitrified Tiles.including Screed bedding 1:4, 15mm thick for laying floor finishes with for joint free
90	Material and labour for Providing edge moulding to18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. completemaking nosing /Rounding to edges of Granite stone slabs one edge, such as in steps, platform, skirts, and othersimilar situations complete as direction by EIC.
91	S& F of Water proof Plywood of thickness 18mm including necessary adhesives etc complete.
92	Material and labour for providing04 mm veneer of approved shade as directed
93	S&F of white/half white laminated sheet of thickness 0.6 mm Fixed on both sides of plywood including necessary adhesives etc complete.
94	S &F of PVC Edge Band 1.00 mm Thick around the edges of shutter.
95	S&F of Color Acryliclaminated sheet of thickness 1.20 mm Fixed on both sides of plywood including necessary adhesives etc complete.
96	Supply and Fixing of Stainless steel Handle of Size 300mm includign necessay screws etc complete.
97	Supply and Fixing of Stainless steel Handle of Size 200mm includign necessay screws etc complete.
98	Supply and Fixing of Stainless steel Handle of Size 150mm includign necessay screws etc complete.
99	Supply and Fixing ofsoft closer Runner 500/550mm.
100	Supply and Fixingof Soft closer autoHinges.
101	Supply and Fixingof SS Basket 200 mm depthas per req size.
102	Supply and Fixing of SS Basket 150 mm depthas per req size
103	Supply and Fixing of SS Basket 100 mm depthas per req size
104	S&F of oil pull out 150 mm
105	M & L for 10mm thick Toughened Glass in fixed position with necessary \"cantilever/H/D\"bracketsholder with screws etc., all cut-out exposed edges to be bull nosed with full round moulding/polished.all complete as directed by EIC
106	Supply and fixing sheet glass Frosted quality of 4.00mm thick.
107	Supply and Fixing of Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as directed by EIC.
108	Providing and fixing 600mm wide Wash basinof polished 19mm thick granite slab top of approved shade laid on 25mm thick one side polished cuddupahwith cement mortar in between, supported on 25mm thick both sides polished cuddapah verticals as directed, Provide 200mm high front facia &band above the counter top of same shade granite. All exposed surfaces of platform to be finished in same granite slab andall cut-out,exposed edges to be bull nosed with mirror polished. Also include making necessary cut-outs thru counter topused for dinning. Cost also include making necessary cut-outs for taking drainage pipes and Nahni traps in raised platform, all completed and finished to satisfactory conditions
109	Providing and fixing in position Toilet Wall mounted Coupled Closet, Including soft seat cover, concealed flush tank etc. Make : JAGUAR/KOHLER/DURAVIT or Suitably Equivalent Make)
110	Supply and fixing of Health faucet chromium plated (Make : Parryware / Cera / Ess Essor Suitably Equivalent Make)
111	Providingand fixing Counter sunk wash basins, waste coupling. Cost incl. ofproviding and fixing of bottle traps, angle valve, Teflon tape etc. complete as directed by EIC(Make : JAGUAR/KOHLER/DURAVITor Suitably Equivalent Make)
112	S&F of Diverter with hand shower and rain shower of 200mm dia.(Make : JAGUAR/KOHLER/DURAVITor Suitably Equivalent Make)
113	Supply and Fixing of hot and cold Piller cock 15mmlong body fixed on wash basin with all nessary fitting etc (Make : Parryware/Jaguar / Kohler or Suitably Equivalent Make)
114	Providing and fixing in position Piller cock for wash basin. Make : JAGUAR/KOHLER/DURAVIT or Suitably Equivalent Make)
115	Supply and fixing of Angle Cock (15mm) with pipe (Make : Parryware / Jaguar / Ceraor Suitably Equivalent Make)
116	Supply and Fixing of Straight shelf fixing with and including chromium plate brass screw and wooden/plastic cleats (Make : Parryware / Cera / Ess Ess or Suitably Equivalent Make)
117	Supply and Fixing ofSoap dish fixed with chromium plate brass screws and wooden/plastic cleats(Make : Parryware / Cera / Jaguaror Suitably Equivalent Make)
118	Supply and Fixing of Stainless Steel Liquid Soap container of fixed with wall.(Make : Parryware / Cera / Jaguaror Suitably Equivalent Make)
119	Providing and fixing in position Toilet Paper Holder. Make : JAGUAR/KOHLER/DURAVIT or Suitably Equivalent Make)
120	Providing and fixing robe hook Make : JAGUAR/KOHLER/DURAVIT or Suitably Equivalent Make)
121	Supply and fixing of towel rake(Make : JAGUAR/KOHLER/DURAVIT or Suitably Equivalent Make)
122	Supply and fixing of towel Ring (Make : JAGUAR/KOHLER/DURAVIT or Suitably Equivalent Make)
123	Supply and fixing of tubular towel rail 20mm D type 60cm long of Brass Chromium plated with and including chromium coated brass screws and wooden /plastic cleats.
124	S & F of Double coat hook chrome/stainless steel /brass wall mounted. Make : Jaguar, ESS ESS ,Parryware or Suitably Equivalent Make
125	Supply and Fixing of Precast SRFC manhole covers with frame complete all as directed by EIC.
126	Supply and Fixing of Tumbler Holder of Make :-Jaguar, ESS ESS ,Parryware or Suitably Equivalent Make
127	M&L for PVC Multi floor trap diameter of out let in 75mm with grating including with solvent cement.
128	Supply and Fixing of 15mm swan neck chromium plated sink cock(Make: Jaguar/ESS ESS/Parryware or Suitably Equivalent Make)
129	Providing and fixing in position of Cockroach trap
130	M & L for PVC Gully trap 125/110mm of dia, setting and jointing with solvent cement.
131	S & F of Pillar cock chromium plated to wash basin 15mm dia , but fancy type, with capstan heads,screwed down high pressure with long screwed shanks for iron pipe.
132	S & F of 15 mm Bib Taps, cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule fancy type and chroumium or plated. Make : Any ISI Make
133	S & F of Looking Mirror of any size as required at site selected quality glass, mount on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass.
134	S & F of IWC Squat pan (Orisa pattern) Size 580 x 440mm white / colour with integral foot rests providinglime concrete bed and finishing the top etc.,10 litres flushing cistern low level white with inlet ball valve float and handle including bracket Plastic water closet seat, black, closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device and etc. (Make : Parryware / Cera / Hindwareor Suitably Equivalent Make)
135	Supply of EWC with \"P\" or \"S\" trap including bedding valveless syphonic action type 10 litres flushing cistern low level white with inlet ball valve float and handle including bracket Plastic water closet seat, black, closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device and etc., (Make : Parryware / Cera / Hindware or Suitably Equivalent Make)
136	S & F of Bib tap standard of 15 mm PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms) Make : Any ISI Make
137	S & F of Angle stop valve of 15 MM PTMT any colour high pressure screwed for iron pipe and fixed,(Minimum weight 15mm-90gms)Make : Any ISI Make
138	S & F of PVC connections 15mm size with PTMT nuts of length 600mm.Make : Any ISI Make
139	S & F ofhealth faucet(ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABC wall hook including making connections and fixed in position complet in all respectfixing in pipe etc. (Make : Parryware / Cera / Ess Ess or Suitably Equivalent Make)
140	Supply and Fixing of Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms).Make : Any ISI Make
141	S & F ofBrass chromium plated shower rose 125mm sizewith or without swivel joints, any size, including fixing to steel pipe or union (Make : Parryware / Cera / Ess Essor Suitably Equivalent Make)
142	M & L for fixing Looking Mirror 600 x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers with glass self assembly.
143	S & F of PVC 110mm dia Pipes single socketed, in any length with rubber ring joints laid in trenches or in floors.(Make : Finolex / Aashirvad / Supreme or Suitably Equivalent Make)
144	S & F of PVC 110mm dia Pipes single socketed, in any length with rubber ring joints fixed to walls.(Make : Finolex / Aashirvad / Supreme or Suitably Equivalent Make)
145	S & F of PVC 75 mm dia Pipes single socketed, in any length with rubber ring joints laid in trenches or in floors.(Make : Finolex / Aashirvad / Supreme or Suitably Equivalent Make)
146	S & F of PVC Bend with door 110mm dia any radius.
147	S & F of PVC Bend with door 75mm dia any radius.
148	S & F of PVC single \"Y\" with door 110 mm dia any radius.
149	S & F of PVC (SWR) 75mm,junction single, (Single T) equal or unequal and provided.
150	S & F of PVC (SWR) 110mm,junction single, (Single T) equal or unequal and provided.
151	PVC (SWR) reducers 110mm dia to any radius.
152	S & F of PVC Vent Cowl 110mm dia.
153	S & F of PVC Vent Cowl 75 mm dia.
154	S&F Cast iron heavy duty Drian/channel grating of weight exe. 5 kgsize300x600 m wieghing around 15 kg fixed on floorincluding setting & finshing the sides with Cement mortar comeple (10 nos @ 15 kg / no 150 Kg )
155	Supplying and laying of CPVC pipes 20mm dia SDR 11 including all fittings such as elbow, tee, etc., Plain CPVC SDR 11 fittings on walls /ceiling or laying in floors complete all as specified(Make : Finolex / Aashirvad / Supreme or Suitably Equivalent Make)
156	Supplying and laying of CPVC pipes 25mm dia SDR 11 including all fittings such as elbow, tee, etc., Plain CPVC SDR 11 fittings on walls /ceiling or laying in floors complete all as specified.(Make : Finolex / Aashirvad / Supreme or Suitably Equivalent Make)
157	Supplying and laying of CPVC pipes 32mm dia SDR 11 including all fittings such as elbow, tee, etc., Plain CPVC SDR 11 fittings on walls /ceiling or laying in floors complete all as specified.(Make : Finolex / Aashirvad / Supreme or Suitably Equivalent Make)
158	S & F of 20mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe.(Make : Finolex / Aashirvad / Supreme or Suitably Equivalent Make)
159	S & F of 25mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe (Make : Finolex / Aashirvad / Supreme or Suitably Equivalent Make)
160	S & F of 50 mm dia UPVC Pipes (SCH-40)of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.
161	S & F of Gun Metal Valve 20mm dia with iron wheel head, screwed both ends for iron pipe.
162	S & F of Gun Metal Valve 25mm dia with iron wheel head, screwed both ends for iron pipe.
163	S & F of Gun Metal Valve 50mm dia with iron wheel head, screwed both ends for iron pipe.
164	S & F of 25/20 mm dia brass ball valves high pressure, with epoxy coated aluminium rod & High density plasticfloat and fly nut complete screwed for iron pipe. Minimum weight for 25mm dia shall be 455 gms.
165	S & F of 25mm dia PTMT ball valves high pressure, with epoxy coated aluminium rod & High density plasticfloat and fly nut complete screwed for iron pipe. Minimum weight for 25mm dia shall be 455 gms.(Make : Finolex / Prayag / Lipka or Suitably Equivalent Make)
166	Supply and fixing of stainless steel 304 grade hand rail top rail 50mm dia,stiffner 20mm, 32mm square bar with wall thickness 1.2mm with nessesary flanges,holding clamps with complete buffing and polishing all complete as approved and as directed by EIC.
167	Supply and Fixing of 2 mm polycarbonate /translucent corrugated sheeting with two corrugations side lap fixed with coach screw andwasher in roof, wall etc.
168	Supply and Fixing offramed workusing Fe 410 -W A quality mild rolled steel tube,angles,plates etc. inculding cutting,weldingand grouting in the brick work etc complete.
169	S&F of Pre-painted galvalume aluminium zinc coating GI based corugatted steel sheet 0.50mm (TCT) thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self drilling / self tapping anti corrisive screws with EPDM seal complete all as per manfacturers specifications and instructions and as approved and as directed by EIC
170	S&F of Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self drilling / self tapping anti corrisive screws with EPDM seal complete all as per manfacturers specifications and instructions and as approved and as directed by EIC
171	S & F of Framed work such as grills, gratings, for ornamentaland intricate designetc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung asgates, including pintle hinges, stops,hand made sliding bolts, etc conforming to Fe.290.Gde-E-16
172	S & F of Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung asgates, including pintle hinges, stops,hand made sliding bolts, etc conforming to Fe.290.Gde-E-16
173	S & F of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete,at site as per design/modelapproved by E-I-C.
174	Material and Labour for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, leveland curvature, jointed with cement mortar1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.
175	M & L for Concrete bed to drain pipes (200mm).inPCC Type C2 1:3:6 Including acking under, and haunching against the sides of pipes after they are laid and tested in
176	M & L for Concrete bed to drain pipes (150mm).inPCC Type C2 1:3:6 Including acking under, and haunching against the sides of pipes after they are laid and tested.
177	S & Fof 200mm Sail-glazed stoneware drain pipes laid in trenches and jointed as specified.
178	S & Fof 150mm Sail-glazed stoneware drain pipes laid in trenches and jointed as specified.
179	M&L for 225 mm(inner dia) Cuttingintoexistingmanholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required.
180	M & L for painting to wooden surfaces of any description over 10cm width or girth with Two coats of synthetic enamel paint. including pink primer preparing newwooden surfaces.
181	M & L for painting to steel surfaces ofany description, over 10cm in width or girth,with two coats of synthetic enamel paint over a coat of redoxide primer including preparing new surfaces.
182	Material and Labour for matallic painting of steel surfaces with two coats of synethic enamel paint and painting a coat of red chrome or zinc chromate primer over the steel surfaces includng preparation of new surfaces.
183	M&L for applying for single coat of alkali resistant priming paint including preparation of Ceilingsurfaces with 3mm thick wall care putty on gypsum board Ceiling. (Make shall be of JK white putty / Birla white wall care puttyor Suitably Equivalent Make)
184	M&L for applyingfor single coat of alkali resistant priming paint including preparation wall surface with 3mm thick wall care putty on internal / Exterior wall.(Make shall be of JK white putty or Birla white wall care putty or equivalent)
185	Material and labour for applying two coat of interior plastic emulsion on internal wall/gypsum board Ceilingsurfaces.( Make :- ASIAN, NEROLAC, BERGER or Suitably Equivalent Make)
186	Material and labour for applying two coats of Exterior emulsionnew External wall surfacesall complete (MAKE:- ASIAN - Apex Ultima/NEROLAC/Berger or Suitably Equivalent Make)
187	Material and labour for applying two coat of oil bound distemper on internal wall surfaces (MAKE:- ASIAN, NEROLAC, BERGER or Suitably Equivalent Make)
188	M & L for paintingconcrete surfaces pre cast kerb stones in approved design, shape and colour of two coats of Synthetic enamal with one coat of red led primer including new surfacesif required.Make as aapproved by the EIC.
189	M & L for applying interior decorative texture finish on wall surfaces using Asian paints royale play (or) Interior Decorative Wall Texture pattern work like Rustic Indian/Italian/Innovative Textures. The minimum painted thickness should not be less than 1mm. The texture and effects of decorative finish will be finalised by EIC. The cost includes labour, emulsion, scaffolding, plaster of paris etc., all complete as directed by EIC
190	Providing and fixing Commercial grade Wall Paper of approved shade with recommended Adhesive of approved makewhich have 100% washable, Scratch resistance, Peel proof, & fire retardant properties.
191	material and labour for applying mellamine finish glossy/matt in wall/wood etc., whereever required and as directed
192	supply and fixing of solid letters(Times New Roman/Bookman)of 100 mm to 150 mm height 8 to 10 mm thick made up ofbrass as per site requirement complete all as directed…
193	Material and Labour for plugging of hard/dense soil including necessary preparation of the existing ground for plantation of Bermuda/Zoysia/Korean Gras etc., all complete as directedby EIC.
194	Supply and layingof Bermuda/Zoysia/Korean Grass including wateringetc complete all as directed..
195	Supply and layingof Hedgingplants (Golden Durantha,Clerodendron) includingwateringetc complete all as directed…
196	Supply and layingof Decorative plants with pots(mud/cement/pvc) min 3 ft height (Fox paim Christmas Tree,Arrow Head, Dumb Cane,Colour Blaze, including wateringetc complete all as directed…
197	Supply and layingof perenial flowering plantsixora(big size),cortons variety ,Roses different variety pinwheelg including wateringetc complete all as directed...
198	supply ond filling pure Red Earth including spreading, levellingthe surfaces smooth and uniform to facilitate plantatin of grass, Hedgeplants etcall complete as directed by EIC.
199	Supply and spreading of cow dung manure for the plantations in the propsed site in various stages etc complete all as directed by EIC.
200	Supply and filling ofgraannular space between casting pipe and raw bore with free pebbles of size 6mm to 10mm complete all as specifed and directed.
201	Testing water samples taken from borewell for potability at king Institute, Guindy, Chennai and submit the report in original as per the instruction of EIC.
202	Supplying transporting and lowering and fixing in bore well 50 mm inner dia and 60 mm outer dia of PVC threaded submersible pipe each 10 feet length with joint and wire lock system with pressure rating 20kgf/cm² (MAKE- FINOLEX / ASHIRVAD/ TRUBORE or suitabally equivalent make)
203	Supply and fixing of 50 mm dia brass non return valves, screwed both ends for HDPE/PVC pipe with all accessories Note : Brass Non Return Valve + Nipple + Clamp + Welding or ( Pipe + MTA/FTA+ Valve ) required fitting included. Make : Any ISI Make
204	Supply and Fixing of NYLON rope of 12 mm dia along the PVC bore pipe and tied with motor base for safety of PVC pipes and tied with pvc tags of 5 mm thick each 1 meter of the bore well pipes.Make : Any ISI Make
205	Supply, install & commissioning of electric motor driven subersible pumpset multistage AC, 3 Phase, 400/440V, 50Hz with high quality Bronze impeller suction housing with perforated strainer with delivery size 50mm dia, complete with standard necessary accessories including Finolex make flat flexible weather proof PVC sheathed over insulated 3 core 4 sq.mm, 1100V grade from Motor to starter pumping capacity 60 to 70 LPM, Head 75 m ,10 Stage pump of 5 HP motor of ( Make : Kirloskar /Texmo / CRI or suitabally equivalent make only) with water level sensor , and the size of the motor should be suitable for 6 inches dia bore.
206	Supply & fixing of pillar / wall mounting (as per site requirement) panel 1200mmX600mmX 200mm size of indoor / outdoor type made out of 2mm thick MS sheet including provision of 2 coats of Red Oxide primer and two coats of aluminium paint on surface. The box should have heavy duty hinges and front door should open by using panel key. The box shall be dust and vermin proof. The joints of the box shall be fully welded. The box and door should have the metal beading width of 10mm and 15mm respectively. The rubber/PVC beading should be provided around the box cover for water proof. The box shall be provided with 2 nos 6mm earthing bolts with 2 nos of plain washers and one spring washer with nut at both side of the box shall be provided. The box shall be provided 2 nos of gland holes suitable for 3.5C, 25Sqmm for cable entries for Incoming & Outgoing. All the power & control wiring shall be the scope of the contractor. The power wiring shall done between TPN main switch to starter & MCCB shall be done with 16 Sqmm PVC insulated flexible copper wires/cable with proper lugs. The wiring shall be neatly bunched together with non returnable cable ties. The panel shall be fitted with functional accessories such as:a) 3 phase, 415 Volts 32 Amps TPN main switch suitable for operation of above referred pump set (Make: Havells/Standard/Indo Asian or suitabally equiavalent make), b) Single phase preventer (Make: L&T, Minilec,Standard or suitabally equiavalent make), c) Voltmeter 0 to 500 Volts (Size: 96X96 mm, Make: AE/MECO/RISHAB or suitabally equiavalent make) with 3 phase selector switch (Make: Salzer/Switron/ Kaycee or suitabally equiavalent make), d) Ammeter 0 to 30 Amps (Size: 96X96mm, Make: MECO/IMP/RISHAB or suitabally equiavalent make) with 3 phase selector switch (Make:salzer/ Switron/Kaycee or suitabally equiavalent make), e) Indication lamps (LED integral type - 25mm panel cut) for R, Y, B phases (Make: Teknic/vaishnov/jai balaji or suitabally equiavalent make), f) Suitable rated DOL starter for above referred pump set motor with proper O/L relays and contactor (Make: Siemens/BCH/Schneider or suitabally equiavalent make), g) Electronic Timer (Range: 0 to 60min) (Make: EAPL/L&T/Siemens or suitabally equiavalent make), h) Dry run protection relay suitable for 3HP to 10 HP submersible pump motor (Make: Minilec/Siemens/BCH Siemens/BCHor suitabally equiavalent make).
207	M & L For Drilling Bore holes 12 inch dia using power rig in any type of soil etc. and cleaning site after drilling.
208	Supplying transporting and lowering in raw bore wells PVC NON SLOTED Casing pipe of size 8 inch inner dia having thickness of 7.6 to 8.8 mm and lowering with vertical alingment including jointing complete . ( Make of the pipe shall be - Truebore/Finolex/Aashirvad or suitabally equiavalent make) are only acceptable.
209	Supplying transporting and lowering in raw bore wells PVC VERTICAL SLOTED Casing pipe of size 8 inch inner dia having thickness of 7.6 mm to 8.8 mm and lowering with vertical alingment including jointing complete .( Make of the pipe shall be - Truebore/Finolex/Aashirvad or suitabally equiavalent make)
210	Supply & Laying of 4 Core,PVC insulated, armoured, heavy duty electric cable with Aluminium conductor 1100 volts grade, cross sectional area 25 Sqmm through cable trenches/ flooring/ pipes etc. including termination with suitable glands and lugs etc.
211	RWH - Material and Labour for 20mm special gravel used for filteration media laid in layers and rammed including watering complete as directed by EIC.
212	Material and Labour for 40mm quarried rubble stone or broken nullah boulders in large pieces for soiling/subbaseof drain /filter media for RWN etc.,
213	Supply and Fixing of Nylon mesh 1 Sq mm filter area placed between the filtering layer in recharge pit, dug well, tube wells etc., complete as directed by EIC.
214	PUMP:-Supply, Installation, Testing and Commissioning of 1 no. 3 Phase 5 HP Open well submersible pump with inlet and out let piping arrangements Stainlesssteel suction filter mesh (Pump make : Kirloskar / CRI / Best or Suitably Equivalent Make)
215	FOUNTAIN EQUIPMENT:Supply, Installation, testing and commissioningof Fountain equipment fabricated out of Stainless steel 304 grade materials – consists of 1 no. Dandelion Fountain unit including 1 no. Spherical Header ( Brass with Nickel coated), 70 nos. Arm pipes ( SS 304) 70nos. Nozzles ( Brass Nickel coated) and 1 no. Vertical support pipe Frames & Leg supports with Main feeding pipe arrangements & sub-feeding arrangements for nozzles, light fixing brackets as required.
216	PLUMBING: Supply , Installation , Testing and commissioningof Interconnecting Plumbing between Fountain Equipments and Pumps withUPVC Pipes & UPVC fittings with necessary Control valves ( UPVC) etc., as required.
217	ELETRICAL CONTROL PANEL:Supply, Installation, Testing and Commissioning of Fountain control panel – Out door type with powder coated finish along with – 1no. 32 A 4P MCB for incoming mains – 1no. Starters with O/L Relay for pump – 1no. 1 pole MCB 10A and1 no. 230 V/12 V DC Power supply for Lights, 1 no. RGB Controller unit for Lights, Phase Indicators including Panel wiring etc.,
218	Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SR (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in theratio of 1:4 (1 cement : 4 coarse sand) andgrouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet wallsin the same manner.
219	Supply and fixing ofsingle phase 230 V 25 litres capacity inlet 25 mm and outlet 20 mm pipe, 1 HP single pressure Booster Pumpto the delivery line from the OHT Make : CRI / Kirloskar / Crompton or suitable equilant.
220	Supply and fixing of Security cabin made of high quality FRP8 feet X 8 feet x 8 feetwith door and glasswindow with locking arrangement.
221	Returning, filling in Hard/dense soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm.
222	Removal of excavatedSoil materials to a lead exceeding 250 m but not exceeding 500 m and depositing where directed including, spreading & leveling
223	Removal of excavateddebris materials to a lead exceeding 250 m but not exceeding 500 m and depositing where directed including, spreading & leveling
224	Material and labour for One light point controlled by one switch light/fan wiring with 1.5sqmm FRLS PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduuit accessories run on wall/ roof/L angle including M.S. switch box concealed in the wall(made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc.mount on a wall/roof etc. including copper earth continuity wire.
225	One bell/ buzzer point controlled by one push buttOne bell/ buzzer point controlled by one push button .(Make: Legrand Myrius/ Litaski/ Crabtree or Suitably Equivalent Make)
226	One 3 pin plug socket with switches flush type 5A on same board with 2.5sqmm cable(Make: Legrand Myrius/ Litaski/ Crabtree or Suitably Equivalent Make)
227	One 3 pin plug socket with switches flush type 5A on Independent board with 2.5sqmm cable(Make: Legrand Myrius/ Litaski/ Crabtree or Suitably Equivalent Make)
228	Supply fixing and connecting to the system modular type switches 6A single pole one way (Make: Legrand Myrius/ Litaski/ Crabtree or Suitably Equivalent Make)
229	Supply, fixing and connecting to the system of socket, 6A-2/3 pin combined modular type 2 module(Make: LEGRAND MYRIUS/ Litaski/ Crabtree or Suitably Equivalent Make)
230	Supply, fixing and connecting to the system modular type switch one way16A, 1 module(Make:,LEGRAND MYRIUS/ Litaski/ Crabtreeor Suitably Equivalent Make)
231	Supply, fixing and connecting to the system of socket, 6/16A-2/3 pin combined modular type 2 module(Make:,Legrand Myrius/ Litaski/ Crabtree or Suitably Equivalent Make)
232	Supply fixing and connecting to the system modular type bell push/switch 6A(Make:Legrand Myrius/ Litaski/ Crabtree or Suitably Equivalent Make)
233	Supply fixing and connecting to the system bell multi music type(Make : Anchor / C & S / GM or Suitably Equivalent Make)
234	Material & Labour for ceiling rose, 3 Phase/PVC/polycorbonate, isolated body (Make : ANCHOR / LEGRAND/ HAVELLS or Suitably Equivalent Make)
235	supply & fixing of lamp holders PVC/polycorbonate type with cord grid cap suitabile for pendant/straight/slanding fittings.(Make : ANCHOR / GM / ORBIT or Suitably Equivalent Make)
236	Supply & fixing of modular white cover plate with frame 2 module .(Make: Anchor Roma /GM / Litaski or Suitably Equivalent Make)
237	Supply & fixing metal flush box for 2 module plate (Make: Anchor Roma /GM / Litaski or Suitably Equivalent Make)
238	Supply & fixing of 4 modulewhite cover plate with frame(Make: Anchor Roma /GM / Litaski or Suitably Equivalent Make)
239	Supply & fixing of metal flush box for 4 module plate (Make: Anchor Roma /GM / Litaski or Suitably Equivalent Make)
240	Supply & fixing of 6 module modular white cover plate with frame(Make: Anchor Roma /GM / Litaski or Suitably Equivalent Make)
241	Supply & fixing of metal flush box for 6 module plate (Make: Anchor Roma /GM / Litaski or Suitably Equivalent Make)
242	Supply & fixing of 8 module plate with frame(Make: Anchor Roma /GM / Litaski or Suitably Equivalent Make)
243	Material & Labour for wiring with two runs of FRLS PVC insulated sheathed single core copper cable upto 1100 volts grade confirming to IS 694 multistrand with copper conductor along with PVC conduit and conduit accessories run on wall/roof one run of copper cable as earth wire. 2x2.5 sq.mm+1x2.5 sq.mm earth wire (Make: Finolex/Havells/Polycab/ Kundan or Suitably Equivalent Make)
244	Material & Labour for wiring with two runs of FRLS PVC insulated sheathed single core copper cable upto 1100 volts grade confirming to IS 694 multistrand with copper conductor along with PVC conduit and conduit accessories run on wall/roof one run of copper cable as earth wire. 2x4.0 sq.mm+1x4.0 sq.mm earth wire (Make: Finolex/Havells/Polycab/ Kundan or Suitably Equivalent Make)
245	Material & Labour for wiring with five runs of FRLS PVC insulated sheathed single core copper cable upto 1100 volts grade confirming to IS 694 multistrand with copper conductor along with PVC conduit and conduit accessories run on wall/roof one run of copper cable as earth wire.4x10 sq.mm+1x10 sq.mm earth wire(Make: Finolex/Havells/Polycab/ Kundan or Suitably Equivalent Make)
246	Material and labour for Brick walls cutting chases,pining in, making good to facing where required and pointing in cement mortor 1:3 to ends and cutting chases forconcealed conduit wiring, etc.,and making good,cutting exc. 10 cm but not exc. 20 cmgrith.
247	Supply and fixing of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete (Make: PHILIPS / Bajaj /CG /Havells / Wipro or Suitably Equivalent Make)
248	Supply and fixing of LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. (Make: PHILIPS / CG /Havells / Wipro / Klite/ Bajaj/ Luker or Suitably Equivalent Make)
249	Supply and fixing of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 300mm (Make:Almonard/Kaithan or Suitably Equivalent Make)
250	Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)conforming to IS 374-2019. Make:Usha/ crompton/ atomberg/ havells/ orient or suitably Equivalent Make
251	Supply and fixing of electric water heater,storage type steel/plastic body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated, 8 Bar pressure, complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. 8 Bar pressure. (Make: Havells/ Racold/ Crompton or Suitably Equivalent Make)
252	Supply& fixing sheet metal enclosures for DB\"s when MCBs to be use,415 V, Triplepole and neutral, 4 way with 200 amps rated bus bar, double door. (Make: STANDARD / LEGRAND / HAVELLS/ Schneider /ABB or suitable equivalent make)
253	Supply& fixing sheet metal enclosures for DB\"s when MCBs to be use,415 V, Triplepole and neutral, 6 way with 200 amps rated bus bar, double door. (Make: STANDARD / LEGRAND / HAVELLS/ Schneider /ABB or suitable equivalent make)
254	Supply, fixing & connecting to the system of Sheet metal enclosures with double door DB\"s when MCB\"S to be used Single pole Neutral 8 way with 200 Amps rated busbar, (Make: Legrand/ABB/ Schneider or Suitably Equivalent Make)
255	Supply and fixing of MCCBs 415V,16KA, 4 Pole, 100 AMake:ABB/Schneider/L&T/Legrand or Suitably Equivalent make
256	Supply and fixing 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. (Make: STANDARD /LEGRAND/ HAVELLS / ABB / Schneideror suitable equivalent make)
257	Supply and fixing 415V 10KA \"B\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning. TP (Triple pole) 25 To 63 AMP (Make: Legrand/Havells/ABB or suitable equivalent make)
258	Material and labour for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion
259	Material and labour forEarth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm galvanised iron/steel wire.
260	Material and labour forEarth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25X4 mm galvanised iron strip.
261	Supply, laying or fixing with suitable clamps or passing through pipe,PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 70 sqmm, 3.5core. (Make : Gloster/Nicco/Havells or Suitably Equivalent Make)
262	Supply, laying or fixing with suitable clamps or passing through pipe,PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 50 sqmm, 3.5core.(Make : Gloster/Nicco/Havells or suitably Equivalent Make)
263	Supply, laying or fixing with suitable clamps or passing through pipe,PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 35 sqmm, 3.5core.
264	Supply, laying or fixing with suitable clamps or passing through pipe,PVC insulated, armoured, heavy duty electric cable with aluminium stranded conductor, 1100 volts grade, cross sectional area 16 sqmm, 4 core.
265	Brick work with subclass \"B\" bricks straight/curved on plan exc 6m mean radius built in (Cement mortar 1:4)
266	Rendering 10mm thickness on fair faces of brick work surfaces. (cement plaster 1:4)
267	Excavating in trenches hard dense soil not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying cable.
268	Material & labour for sand filling for cushioning on U.G cable
269	Materal &labour for Bricks; common burnt clay building bricks sub class B designation 75, Old size bricks for protection to U.G cable
270	Returning, refilling in the excavated trench after laying of power cable including spreading levelling, watering and well ramming in layers not exc 25 cm.
271	Supply and fixing of 3 phase electronic meters temper proof LCD display with polycarbonate cover3 phase, 415V, 10-60Amp,accuracy class-I 50Hz,conforming to IS 13779,IP-54,with parameters to show data, time,current reading, load, PF, voltage and KWH ,with sheet metal enclosure
272	Supply and fixing of Galvanised steel tube Medium Grade 40 MM
273	Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.
274	Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.
275	Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.
276	Demolition of cement concreteof any description and in any position
277	Material & labour for cement concrete 1:2:4 Type B1 using 20mm graded aggregate in foundations, filling and mass concrete.
278	Supply and fixing of MCBDB 4 way (DPX160+12) legrand make as per legrand 2010 catalogue No:607790 or equivalent model of ABB/schneider)
279	Supply, laying or fixing with suitable clamps or passing through pipe,PVC insulated, armoured, heavy duty electric UG cable with copper conductor, 1100 volts grade, cross sectional area 2.5 sqmm, 4 core. (Make: Finolex/ Havells / Gloster / Polycab/ Paragon or suitable equivalent make)
280	OutdoorFeeder Pillar Box consisting of 200A MCCB-1 No for incomiong, outgoing feeders areMCCB-6 Nos. Specifcation sheet enclosed as Annexure - I (1.0.1 to 1.0.9.5).
281	Supply & fixing of outdoorterminal box size of 600mm X 600mm X 300mm of 3mm thick.Thebox shall be dust, vermin & water proof,front door should open by using panel key. the box should be powder coated and door should have the metal beading width of 10mm. the box shall be provided with teak wood plate fixed insidethe box on welded bracket with 4 No of 6mm counter sink screws. 2 Nos of 6mm earthing bolts with proper washers and nut at both side.The box should contain power contractor of 32 Amps triple pole, coil voltage 230 Volts,progrmmable timer with LCD display Make select and Elmaxconnector suitable for 16 sqmm cable (10 Nos).
282	Supply and Installation of Kitchen chimney 600mm wide with auto clean facility and suction power of minimum 1200 CFM along with exhaust pipe upto 5 mtrs (Make:Faber/Godrej/Elicia or Suitably Equivalent Make)
283	Supply, fixing & connecting of the system cable end termination of size 50 sqmm 3.5 core including with suitable cable gland & lugs.
284	Supply, fixing & connecting of the system cable end termination of size 35 sqmm 3.5 core including with suitable cable gland & lugs.
285	Supply, fixing & connecting of the system cable end termination of size 16 sqmm 4 core including with suitable cable gland & lugs.
286	Supplyand fxing of LED Bollard light fitting complete with 10 watts LED lamp and accessories. Height 500mmMake:Klite Trio Bollard Cat.no.KL 6955 or Suitably Equivalent model in Philips/ CG/ Havells)
287	Supplyand fxing of LED Gate light fitting complete with 30 watts LED lamp and accessories. (dia.425mm x 325mm) (Make: Klite Cat.no.4975 or Suitably equivalent model of HAVELLS, PHILLIPS, CG, WIPRO)
288	Supply & fixing of outdoor street light terminal box size of 200mm X 200mm X 150mm of 3mm thick.Thebox shall be dust, vermin & water proof,front door should open by using panel key. the box should be powder coated and door should have the metal beading width of 10mm. the box shall be provided with teak wood plate fixed insidethe box on welded bracket with 4 No of 6mm counter sink screws. 2 Nos of 6mm earthing bolts with proper washers and nut at both side. two nos of mounting brackets (flat size of 30mm x 6mm) shall be weldedand two nos clamps( 30mm width x 6mm thick) for mounting the box on pole. The box shall be provided with 6Amps SP MCB and four numbers of DIN rail connector model CBT-110, make-Elmex, Fixed on the wooden plate along with suitable channel.
289	Supply, fixing of modular type MCB 20 A,240 volts single pole , in the MCB DB complete with connection testing and commissioning. (Make:legrand /Havells/Hager/L&T/ ABB or Suitably Equivalent Make )
290	Supply & fixing metal flush box for 8 module plate .(Make: Anchor Roma /GM / Litaski or Suitably Equivalent Make)
291	Supply & fixing of 12 module plate with frame and metal flush box(Make: Anchor Roma /GM / Litaski or Suitably Equivalent Make)
292	Supply and fixing of LED ceiling/Recessed mounting fitting complete with suitable Led lamp and accessories wattage 24 to 30 watts and minimum system output 1800 lumens Make:Philips/Bajaj/CG/ Havells/Wipro orsuitable equivalent make
293	Supply ,installation and testing of LED strip lightwith adaptor, end holder and all accessoriescomplete as required as per the site conditon
294	Supply and fixing of 1.5 TR capacity inverter split type Air conditioner with 5 star rating copper core coil. Make: Blue star/LG/ Carrier / Voltas with all accessories including 4 KVA stabilizer
295	Material & Labour for Horizontal drilling hole (trench less Boring) at a depth of 1.5 mtr below the normal ground level and supply and insert including materials 150mm bore HDPE pipe across the roadcross the horizontal position at different location using special drillng machine all as per trade practice and as directed.
296	Supply & fixing of modular type Dummy plate
297	Supply, Installation, commisioning & Testingof 25 KVA, 3 Phase Diesel Generator set with AMF control panel and its connected accessories as per technical specification attached as Annexure - II. Make: Cummins/ Koel green/ Kirloskar/ Greaves/ Ashok leyland.
298	Supply , installation and commissioning of of ground mounted solar power plant of capacity 3 KVA with all connected accessories, battery back up includingcivil and electrical works as per Annexure-III.
299	Supply and fixing ofprofilefor LED strip light as required sizeas per the site conditon. Make:Klite/ Bajaj/Wipro/havells/ Philips
300	Supply and fixing of water proof RGB LED colour lights with adaptor, driver unit connectingwith proper cables ,with panel enclosure, IP66. Make:Klite/ Bajaj/Wipro/Havells/ Philips
301	Supply and fixing of chandlelier light fitting with 5 nos led lights. Make:Klite/ Bajaj/Wipro/ Havells/Philips
302	Supply, fixing & connecting of the system cable end termination of size 2.5 sqmm 4 core including with suitable cable gland & lugs.
303	Supply, fixing & connecting of the system cable end termination of size 70 sqmm 3.5 core including with double compression suitable cable gland & lugs.
304	Earth excavation in trenches on any type of soil 75 cm depth 30cm wide for an length of 300 meters getting it out and depositing the same on the side for refilling as directed
305	Suppling and filling levelling and consolidated sand to a thickness 15 cm trenches over the telephone cable for cushioning.
306	Refilling the excavated soil in the trench including spreading and levelling
307	supply and laying old size burnt bricks sub class B in width wise over the telephone cable
308	supply and fixing of non metalic rigid PVC Pipe size of 25 mm Dia including all fixing like bend, tee, fixing clamps, etc
309	Material labour for cutting chases, pining in, making good to facing where required and pointing in cement mortor 1:3 to ends and cutting chases for concealed conduit wiring, etc., and making good, cutting exc. 10cm but not exc. 20 cm grith
310	supply and laying in thetrench and /or in the cable trayincluding clamping and termination of 20 pair jelly filled armoured underground coper telephone cable (Make : Finolex / vindhya / delton or Suitably Equivalent Make)
311	supply, laying and termination of 5 pair PVC telephone coper cable (Make : finolex / five star / delton or equivalent)
312	supply and fixing of powder coatedwall mountable telephone distribution box - 100 pairs
313	Supply and fixing of floor mounted powder coated telephone distribution boxwith KRONE connector stripssuitable for connecting 400 pairs of lines with complete installation of panel by making proper foundation with supply of ISMC channel, foundation bolts and associated materials.
314	Supply and fixing modular white cover plate with frame 4 module (Make: Anchor Roma /GM / Litaski or Suitably Equivalent Make)
315	Supply and fixing modular metal flush box for 4 module plate(Make: Anchor Roma /GM / Litaski or Suitably Equivalent Make)
316	Supply and fixing of telephone cable route indicator: route marker shall be made out of 100mm x 100mm x 5mm cast iron bolted or welded on 35mmx35mmx6mm MS angle iron of 600mm long. Such indicators grouting with proper concreting work marked as \"TEL CABLE\" in every 10 meters.
317	supply and fixing of modular type telephone socker. Make: Legrand myrius/ crabrtee/litaski or equalent make

Also Visit

Tenders

Tamil Nadu Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of 02 Nos. Of Type-Vi Quarters At Avnl Estate, Thiruvallur-Tamil Nadu

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of 02 Nos. Of Type-Vi Quarters At Avnl Estate, Thiruvallur-Tamil Nadu

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us