Addn/ Altn To Guard Rest Room And Watch Tower At Afs Under Ge (Af) Jorhat 1 Excavating in trenches n. exc. 1.5m wide and n. exc. 1.5m in depth as in drain, etc. and getting out in soft /loose soil complete all as specified and as directed. 2 M&L for hardcore of gauge n. exc. 63mm, deposited spread and levelled in layers n. exc. 15cm thick watered and rammed to a true surface complete all as specified and as directed. 3 M&L for plain cement concrete (1:2:4) type B-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. 4 M&L for brickwork with sub class ‘B’ bricks, straight or curved on plan exc. 6m mean radius, built in cement motar (1:6) complete all as specified and as directed. 5 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft/loose soil complete all as specified and as directed. 6 Removing excavated material to a distance not exc. 50m and deposited where directed at a level n. exc. 1.5m above the starting point complete all as specified and as directed. 7 M&L for providing 75mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) in sub-floors, sub bases, pavements, etc. complete all as specified and as directed. 8 M&L for providing 50mm thick PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) in sub base,plinth protection, etc., finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed. 9 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. 10 M&L for non-skid ceramic coloured tiles, 7 to 8mm thick (square/rectangular), area of each tile not exceeding 0.11 sqm, as in floors, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match,laid over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. 11 M&L for glazed ceramic coloured tiles as on vertical surfaces of size 450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 10mm thick screed bed/bedding in cement mortar (1:4) complete all as specified and as directed. 12 M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed. 13 M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed. 14 M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS :15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces of walls, etc. complete all as specified and as directed. 15 M&L for preparation of new plastered surfaces of walls and applying putty and two coats of oil bound distemper over and including one coat of alkali resistant primer and making the surfaces smooth complete all as specified and as directed. 16 Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed. 17 S&F mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. 18 S&F mild steel TMT bars, 6 to 8mm dia and over, cut to length, bent to shape required including cranking.bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. 19 M&L for RCC (nominal mix) (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span concrete complete all as specified and as directed. 20 S&F 20mm dia Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers, etc. complete all as specified and as directed. 21 M&L factory made solid PVC door frame of size 50mmx47mm, made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, suppling and fixing in opening as per specification and drawing shown in SSR Part-II as approved complete all as specified and as directed. 22 S&F factory made solid panel PVC door shutter, 30mm thick (style) connecting of frame, made out of MS tube for top and bottom rail. MS frame shall be coverd with heat moulded plain coour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for top rail and bottom rail panelling of plain colour PVC to be fitted in the MS frame welded/sealed in the stiles and rail with suitable PVC sheet and beading and jointed together with solvent cement complete all as specified and as directed. 23 S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed. 24 S&F 100mm long mild steel butt hinges,medium weight cold rolled complete all as specified and as directed. 25 S&F aluminium handle of size 150mm, extruded aluminium alloy,cast type anodised complete all as specified and as directed. 26 S&F 4.0mm thick sheet glass, ordinary quality and glazing with oil putty in square of area n. exc. 0.5 Sqm in each pane complete all as specified and as directed. 27 S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. 28 M&L for preparation of new steel surfaces of any description, not otherwise described for over 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed. 29 S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as per specified and as directed. 30 S&F as in repairs vitreous china wash basin, white, (flat back or angle type) of size 630x450mm fixing with rag bolts but excluding fixing of supply and waste pipe but including waste coupling of PTMT (half or full threaded) (minimum weight 32mm : 45gms) complete all as specified and as directed. 31 S&F as in repairs vitreous china squatting pan, Orissa pattern of size 580x440mm, white, with integral foot rests including flush pipe complete all as specified and as directed. 32 S&F as in repairs 10 litres capacity PVC low level syphonic action type flushing cistern, white with inlet, ball valve, float and handle including brackets, flushing pipe and making connection to pipes complete all as specified and as directed. 33 S&F as in repairs bib taps of size 15mm bore, long body, chromium plated, fancy type, cast copper alloy, with crutch or butterfly screwed down, screwed for GI/ CPVC pipe or for brass ferrule complete all as specified and as directed. 34 S&F 15mm bore dia one way angle valve regular body quarter turn with flange chromium plated, fancy type complete all as specified and as directed. 35 S&F as in repairs 15mm bore consealed stop cock, regular body, quarter turn with flange chromium plated, fancy type complete all as specified and as directed. 36 S&F as in repairs pillar taps of size 15mm bore, cast copper alloy with capstan heads, fancy type, chromium plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. 37 S&F tubular towel rail, brass chromium plated 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. 38 S&F bevelled edge mirror of size 600mmx450mm, selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. 39 S&F as in repairs 15mm dia PVC connection pipe with PTMT nuts of length 450mm complete all as specified and as directed. 40 S&F as in repairs brass chromium plated, fancy type shower rose of size 125mm with swivel joints including fixing to 15mm dia steel pipe or union complete all as specified and as directed. 41 Supply and laying 15mm bore galvanised iron water tubes, medium grade with all fittings, laid in floors, trenches, etc. complete all as specified and as directed. 42 S&F sinks with drainage board made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and as directed. 43 Supply and laying 20mm bore galvanised iron water tubes, medium grade with all fittings, laid in floors, trenches, etc. complete all as specified and as directed. 44 M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats, etc. of Fe 410-W (Gde-E-250) quality A complete all as specified and as directed. 45 S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, etc. with grade of zinc coating 275 complete all as specified and as directed. 46 S&F PVC (SWR) pipes, 110mm dia, single socketed in any length with rubber ring joints, fixed to walls complete all as specified and as directed. 47 S&F PVC (SWR) bends, any radius 110mm dia complete all as specified and as directed. 48 Demolition of plain cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed. 49 M&L for PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in coping, cill and other similar works, finished top surface smooth, edges round and chamfered without using extra cement complete all as specified and as directed. 50 Formwork to soffits of suspended slabs rough finished flat surface such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. 51 M&L for RCC (Nominal Mix) (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. 52 M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like, set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust complete all as specified and as directed. 53 M&L for powder coated aluminium frame work for doors, windows, ventilators, etc. with one or more rebates including jointing cleats for fixing, etc. complete all as specified and as directed. 54 M&L for aluminium powder coated window and ventilator glazed/gauged shutter, side hung type without sash bars aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips rubber packing, anodised aluminium snap beading, screws, anodosed aluminium fittings such as peg stays 150mm long (01 No.), hinges type B-21 100mm long ( 02 No.), suitable handle (01 No.)complete all as specified and as directed.. 55 S&F for aluminium anodised deco grill, fixed with windows with all fittings complete all as specified and as directed. 56 Dismantling of loose concrete cover of RCC columns, beams, slabs chajjas (sun shade) and the like as directed roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry including derusting of steel reinforcement, providing fabric mild steel wire mesh 75x75x2mm dia as reinforcement to concrete surfaces applying adhesive admixture over steel mesh and providing minimum 25mm thick (average thickness) guinting mix using 1 part of ordinary portland cement 53 grade and 2 part of river sand mixed with adhesive/ admixture at the rate as with the pressure of 2 to 2.5 kg/sq.cm by guinting machine and surfaces finished even and fair including necessary padding, shuttering/ formwork/ scaffolding complete all as specified and as directed. 57 M&L for point wiring with 1.5 sq.mm of FR grade PVC insulated and unsheathed stranded copper conductor cable,1100 volts grade as per IS-694 drawn through and including PVC cassing and capping (not less than 20mm wide) /conduit complete with all acessoriesincluding PVC board/ box of suitable size for mounting of switches, sockets, regulators, etc. including 1.5 sq.mm stranded copper conductor cable FR grade PVC insulated and unsheathed as earth continuity conductor for one lightpoint controlled by one, one way switch complete by maintaining the colour code complete all as specified and directed. 58 All as per Serial item No. 57 here-in-before but with 2.5 sq.mm cable for 15 amps socket outlet on independent board, using 2.5 sq.mm earth continuity conductor. 59 S&F ceiling rose surface backelite, three terminals, PVC / polycarbonate insulated body complete all as specified and directed. 60 S&F switch piano, flush type, 6 Amps, 240 volts, single pole one way complete all as specified and directed. 61 S&F socket outlet 15/16 Amps, 6 in 1, flush type complete all as specified and directed. 62 S&F switch piano, flush type,15/16 Amps 240 volts single pole one way complete all as specified and directed. 63 S&F 10 watt integrated LED tube light fitting 2 feet, suitable for single phase 230 volts, 50 Hz AC supply andmounted on wall or ceiling, complete with all accessories internally prewired and including electrical connection with copper conductor cable of size 0.5 Sq.mm (nominal area) complete all as specified and directed. 64 Supply and laying GI pipe of size 25mm dia, medium grade including all fittings complete all as specified and as directed. 65 S&F gate valve of size 25mm dia including all fittings complete all as specified and as directed.NOTE : The contract sum shall be derieved by deducting the amount shown in Schedule of Creditattached to this tender from total amount of Schedule A/BOQ.
