|
| 1 | SCHEDULE \"A\" PART-I (Building Work) (To be quoted by the tenderer) |
| 2 | Item No 01A:Design and construction of Triple Story Single living Accn Building (S+2) (Plinth Area: 3983.35 Sqm), plinth height 300 mm, with permanent specification, RCC Framed Construction, Provn of ATT (for ground floor), provn of sloping roof,Provn of APP, 1mm thick wall care putty, provn of OBD, exterior weather proof paint and cement based paint for external surface, M-25 Concrete, Provn of Mosquito proofing, Complete allspecified in soil bearing capacity report, design basis report drawings and tender documents. |
| 3 | Item No 01B:Design and construction of Sinle Story of Dinning Hall (Plinth Area: 362.65 Sqm), plinth height 300 mm, with permanent specification, RCC Framed Construction, Provn of ATT (for ground floor), provn of sloping roof,Provn of APP, 1mm thick wall care putty, provn of OBD, exterior weather proof paint and cement based paint for external surface, M-25 Concrete, Provn of Mosquito proofing, Complete allspecified in soil bearing capacity report, design basis report drawings and tender documents. |
| 4 | Item No 01C:Design and construction of Sinle Story ofCook House (Plinth Area: 187.50 Sqm), plinth height 300 mm, with permanent specification, RCC Framed Construction, Provn of ATT (for ground floor), provn of sloping roof,Provn of APP, 1mm thick wall care putty, provn of OBD, exterior weather proof paint and cement based paint for external surface, M-25 Concrete, Provn of Mosquito proofing, Complete allspecified in soil bearing capacity report, design basis report drawings and tender documents. |
| 5 | Sch \"A\" Part-II(External Electrical Supply)Lump sum price worked out by the contractor for \"External Electrific Supply\" as listed in Schedule \"A\" Part-II against the lump sum price inserted by the MES. |
| 6 | Sch \"A\" Part-III(External Water Supply)Lump sum price worked out by the contractor for \"External Water Supply\" as listed in Schedule \"A\" Part-III against the lump sum price inserted by the MES. |
| 7 | Sch \"A\" Part-IV(Road, Path & Culverts)Lump sum price worked out by the contractor for \"Road, Path & Culverts\", excavation & earth works\" as listed in Schedule \"A\" Part-IV against the lump sum priceinserted by the MES. |
| 8 | Sch \"A\" Part-V(SewageDisposal)Lump sum price worked out by the contractor for \"SewageDisposal\", excavation & earth works\" as listed in Schedule \"A\" Part-V against the lump sum priceinserted by the MES. |
| 9 | Sch \"A\" Part-VI(Chain Link Fencing)Lump sum price worked out by the contractor for \"Chain Link Fencing\" as listed in Schedule \"A\" Part-VI against the lump sum priceinserted by the MES. |
| 10 | Sch \"A\" Part-VII(Area Drainage/ Rain Wate Harvesting)Lump sum price worked out by the contractor for \"Area Drainage\" as listed in Schedule \"A\" Part-VII against the lump sum price inserted by the MES. |
| 11 | Sch \"A\" Part-VIII (Solar Water Heater)Lump sum price worked out by the contractor for \"Solar Water Heater\" as listed in Schedule \"A\" Part-VIII against the lump sum price inserted by the MES. |
| 12 | Sch \"A\" Part-IX(Refrigeration and Air Conditioning)Lump sum price worked out by the contractor for \"Refrigeration and Air Conditioning\" as listed in Schedule \"A\" Part-XI against the lump sum price inserted by the MES. |
| 13 | Sch \"A\" Part-X(RCC Retaining Wall)Lump sum price worked out by the contractor for \"RCC Retaining Wall\" as listed in Schedule \"A\" Part-X against the lump sum price inserted by the MES. |
| 14 | Sch \"A\" Part-XI (Parking Shed)Lump sum price worked out by the contractor for \"Parking Shed \" as listed in Schedule \"A\" Part-XI against the lump sum price inserted by the MES. |
| 15 | Sch \"A\" Part-XII(SITE CLEARANCE)Lump sum price worked out by the contractor for \"Site clearance, excavation & earth works\" as listed in Schedule \"A\" Part-XII against the lump sum priceinserted by the MES. |
| 16 | Note for Srl No 2 to 13The percentage above / below the SSR -2020 (part-II) rates shall be derived from the amount quoted by the contractor against Srl No. 2 to 13by comparing it with the amount inserted / pre- priced by the department and the same shall be applicable for the items of respective schedule |
| 17 | Schedule \"A\" Part-XIII (Miscellaneous items of works) |
| 18 | Chain Link Fencing |
| 19 | Item No 01 : S&F 2.1meter high concrete precast security wall having 50mm thick cement sets (length=2.10m , width=0.30m using 3mm high tensile cabonized steel and per set 4 pieces with stressing system) and column of cross sectional size 150x150mm(using 3mm PCC steel and per column 7 pieces with stressing system) etc complete all as specified and directed. |
| 20 | Item No 02 : M& L for Steel gate 5.5 m wide with 1.5 m wide wicket gate as per TD drg No.CEJZ/TD/13 OF SHEET NO 1/2 Complete all asspd and directed by engr-in-charge. |
| 21 | External Electrical Supply |
| 22 | Item No 03 : Supply, fabricating, erecting LT Panel board out door type CPRI approved,as per IS 8623double door totally enclosed weather and vermin proof suitably ventilated 415 Volts, 50 cycles, AC supply, factory made fully compartmentalized made out of 3.00 mm thick CRCA sheet steel for load bearing and 2.00 mm thick for non-load bearing protection of enclosure IP 54 as per IS-2147 of 1962 with pretreatmentand powder coated of approved colour including suitable size angle iron/flat iron frame work / support, required civil works, excavation & earth work, PCC 1:2:4foundation etc, installation, testing & commissioning with & including following : complete all as specified and directed. |
| 23 | INCOMING (a) Copperbusbar suitable for 400 Awrapped with PVC sleeves with maintained the colour code and provision of making holes with nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 nos.(b) MCCB IP 44 and IP 66/67 protection, 4 pole, 415 volts, Lcu=35 KA breaking capacity, rating 250 Amps, adjustable thermal magnetic release including all fixing accessories with both ends spreader links-01No.(c) Digital voltmeter of range (0-500) volts, flush mounting type of size 100mm x 100mm (4\"x4\") square dial with selector switch - 01 Nos (Make : Legrand/Schneider/L&T)(d) Digital Ammeter with Suitable rated CTs (Set of three) 0-600 Amps -01 Set(e) LED Neon indicator lamp (RYB) with holder, 230/250 volts, AC -01 set (set of three) Make:-AE, L&T |
| 24 | OUTGOING(a) MCCB IP 44 and IP 66/67 protection, 4 pole, 415 volts, Lcu=35 KA breaking capacity, rating 160 Amps, adjustable thermal magnetic release including all fixing accessories with both ends spreader links-02 Nos(b) MCCB IP 44 and IP 66/67 protection, 4 pole, 415 volts, Lcu=35 KA breaking capacity, rating 100 Amps, adjustable thermal magnetic release including all fixing accessories with both ends spreader links-02 Nos |
| 25 | Item No 04 : Supply, installation, commissioning and testing outdoor wall mounting LT Panel Board of minimum size 1.00 m (height) x 1.00 m (breath) x 0.30m (depth) factory made CPRI approved panel, weather, dust & vermin proof indoor, double door, front openable, including four comparment for fixing of four nos Three phase meter and MCB TPN and providing glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/ sleeves with PVC tape/ sleeves with maintainedvthe colour code and copper strip/wire busbar of suitable size ot MCCB input and MCCB /MCB output of suitable length for connection of cable from main busbar, made out of 2.50 mm thick mild steel CRCA sheet with suitable size angle in supporting frame including applying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed externalinternal surface suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 10 Sqmm copper wire and necesary with all incoming and outgoing cables complete all as directed bt Engineer-in-charge. (for officers Accn) |
| 26 | INCOMING :-(a) Copper busbar suitable for 200 Amps wrapped with PVC sleeves with maintained the colour code and provision of making holes with nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 nos.(b) MCCB IP 44 and IP 66/67 protection, 4 pole, 415 volts, Lcu=36 KA breaking capacity, rating 100 Amps, adjustable thermal magnetic release including all fixing accessories with both ends spreader links-01No.(c) Digital voltmeter of range (0-500) volts, flush mounting type of size 100mm x 100mm (4\"x4\") square dial with selector switch - 01 Nos (Make : Legrand/Schneider/L&T)(d)Digital Ammeter 400 Amps -01 Nos(e) LED Neon indicator lamp (RYB) with holder, 230/250 volts, AC -01 set (set of three) Make:-AE, L&T |
| 27 | OUTGOING(a)MCCB IP 44 and IP 66/67 protection, 4 pole, 415 volts, Lcu=25 KA breaking capacity, rating 63 Amps, adjustable thermal magnetic release including all fixing accessories with both ends spreader links-06 Nos.(b) Single phase electronic 30 A electric meter Make L&T - 06 Nos, |
| 28 | Item No 05 : S&F street light junction box with thermoplastic, IP 65 cable junction box with metric knockouts on all sides, check nut, cable glands for cable entry size: 200 x 160 x 98 mm (Approx) locking arrangement system mounted on pole, consisting of , cable terminal,glands, making weather proof01 No DIN rail and 01 NoMCB SP , 10KA, 6 Amps etc for terminating 4core, 16/25 sqmm 3.5C UG cables.and screw etc, painting andmaking test point and testing complete all as specified and as directed |
| 29 | Item No 06 : S&F Infrared sensor based NATURE SWITCH having selectable options for duration based switching OFF as well as override facility for maintenance, single phase 3 kw consisting of power contactor 16 amp, 2 pole, AC 3 rating conforming to IEC - 60947 - 4 - 1/ IS - 13947 - 4 - 1 for load switching & MCB single pole, 25 amp conforming to IEC - 60898 / IS - 8828 and terminal blocks housed in UV stabilized, FR grade special moulding compound enclosure to provide a rust proof, electric shock proof, termite proof, outdoor mountable electrically insulating body capable of enduring solar radiation in the outdoor & suitable for pole mounting. Make - Kakatiya Energy Systems (P) Ltd Model SWADEEP-02EC 3KW 1P or equivalent in C&S as approved. |
| 30 | Fire Fighting System |
| 31 | Item No 07 : Supply only of fire extinguiser ISI marked CO2 type Fire Extinguisher 4.5 KG capacity conforming to IS : 15683 :2006 (old IS : 2878) made from seamless cylinder conforming to IS : 7285 duly approved by chief controller of explosive , Nagpur fitted with ISI Marked Controlled valve conforming to IS : 3224 , high pressure 1 mtr long discharge hose and horn complete with initial gas charged with carrying handle and wall mounting bracket, , suitable for operating between 30 degree centrigrade to + 55 degree centigrate, Fire Rating Class - 138. |
| 32 | Item No 08 :Supply only of stored pressure fire extinguiser ISI marked powder type Fire Extinguisher 4 KG capacity suitable for Class \"A\", \"B\", \"C\" Fire consisting with discharge hose and nozzle of welded cylinder, squeeze lever discharge valve fitted with pressure indicating guage, internal discharge tube, discharge nozzle suspension bracket conforming to IS : 15683 :2006 (old IS : 2878) duly charged with ISI Marked Mono Ammoniumphosphate base ABC powder conforming to IS : 14609 and pressurized with Nitrogen Gas, suitable for operating between 30 degree centrigrade to + 55 degree centigrate, Fire Rating Class - 1A & 13B |
| 33 | Item No 09 : Supply only of Fire bucket iron body red colour 10 L capacity for dry sand stored type ISI MarkedIS : 2546 :2006, complete all as specified and as directed. |
| 34 | Item No 10 : Supply only of Fire Extinguisher Mechanical Foam type ISI Marked Foam (AFFF) type Fire Extinguisher 9 ltrs capacity fitted with Forged Brass squeeze lever discharge valve, conforming to IS : 15683 :2006, complete with initial refill consisting of ISI Marked CO gas cartridge of 60 gms capacity conforming to IS 4947 and ISI Marked AFFF conforming to IS : 4989, suitable for operating between + 50 degree centrigrade , Fire Rating Class - 3A & 34B |
| 35 | External Water Supply |
| 36 | Item No 11 : Supply & fixing pipes galvanized midium grade and laid in trenches complete including fittings of size 65 mm(2.5 inch). |
| 37 | Item No 12 : Supply and fix Bronze Gun-metal, globe or gate valves, with iron wheel head, screwedboth ends for iron pipe and fixed of size 65mm dia . |
| 38 | Item No 13 : Supply and fix Bronze Gun-metal, globe or gate valves, with iron wheel head, screwedboth ends for iron pipe and fixed of size 40mm dia . |
| 39 | Item No 14 : Supply and fix Bronze Gun-metal, globe or gate valves, with iron wheel head, screwedboth ends for iron pipe and fixed of size 32mm dia . |
| 40 | Item No 15 : Cuttingexisting pipe up to dia 80mm/100 mm and and fixing / connected new pipe line with all connected accessories complete all as specified and directed |
| 41 | Refrigeration and Air conditioning |
| 42 | Item No 16 : Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1.00KVA. |
| 43 | Item No 17 : Supply and fix 5 star rated direct cool smart inverter compressor double door refrigerator, electric driven (single phase), capacity 300 ltr (or nearest higher standard sizecomplete all as specified and directed |
| 44 | Sewage Disposal |
| 45 | Item No 52: S&F 17 KLD Compact STP Automatic (using electric contol panel )mild steel Plantbased on MBBR technology having 2kw electricSewage transfer pump power and following treatment stages (i)Bar screen chamber (ii) MBBR media (iii) Secondry Settling media(iv) Chlorine dosing system (v) Multi-grade sand filter (vi) Activated carbon filter (vii) Slude recirculation (by pump transfer) (viii) Filter feed pump (ix) Air Blower & diffuser (xi) Slude feed pump (xii) Filter press etc complete all as specified. |
| 46 | Road, Path and Culvert |
| 47 | Item No 18 : Supply and fixpolycarbonate reflective convex mirror of size 1000mm dia made of ABS/ fiber/ plastic body with upper collar complete with mounting hardware i.e. necessary clamps & nut bolts etc mounted on and including 50 mm dia MS pipe having 3.0M length duly painted with and includingtwo coatsofsynthetic enamel paint as approved by GE over a coat of red oxide primer and fixed on the ground after necessary excavation and earth work in any type of soil, embeding the delineators on the ground with & including PCC (1:2:4)type B1 using 20mm graded stone aggregate (minimum PCC block size 200mmx 200mmx 200mm for proper grouting) complete all as specified and directed. Make of Convex Mirror:- RSCM-80 of Road Star or equivalent Model of make- Green Lite or Dark Eye or Sun Lite as approved by AGE(I). |
