Tender For Misc Civil Repair And Internal And External Finishing Of Dhobi Rooms Bldg. In Raknpa Ghaziabad.; 1. Acrylic Emulsion Paint Asian (Royale), ICI (Velvet), Berger (Luxol Silk), Nerolac (Allscapes) 2. Premium Acrylic Smooth Exterior Paint Apex Ultima of Asian paints, Weather Coat All Guard of Berger Paint or equivalent. 3. Aluminium Composite Panel Alpolic, AlucoBond,Reynobond, Euro bond, Al-stone, Aludecor. 4. Aluminium Extrusions Hindalco, Indalco, Jindal. 5. Aluminum Sections Hindalco, Indalco, Jindal. 6. Board & Plywood Duro, Green, Century. 7. Ceramic/Rectified Tiles Premium double charge tiles of :-Kajaria, RAK, HR Johnsons 8. CP fittings Hindware, Johnson, Marc, Cera. 9. CPVC Pipes Astral,Flowguard, Ashirvad, finolex,supreme 10. Designer coloured cement concrete floor tiles for external used / Concrete paver blocks. Ultra, Nitco, or Equivalent(mandatory tests to be performed before execution). 11. Epoxy Primer & Paints Berger, Pidilite, SIKO, Asian. 12. Float Glass Modi Float, Saint Gobain, Tata. 13. Flush Doors (ISI Mark only) Green, Duro, Century or Equivalent (mandatory tests to be performed before execution). 14. Galvanized/Stainless Steel Anchor Fasteners Arrow, Hilti, Fischer, Hatticth 15. Gun Metal Gate Valve Zoloto, Leader, SAINT 16. Gypsum Board False Ceiling Boral Gypsum, Gypsum India Limited, USG, St. Gobain(Gyproc) 17. Hardner Hard crete of Snowcem India, MC Deritop F.H. 18. Hydraulic Door Closer Hardwyn, Godrej, Dorma, Sandhu. 19. Hydraulic Floor spring Hardwyn, Godrej, Dorma, Sandhu. 20. Laminate Greenlam, Decolam, Century, Formica. 21. Melamine Polish Melamine Gold of Asian Paint, Wudfin of pidilite, Timbertone of ICI Dulux. 22. M. S. Pipe Electro Steel, Apollo (ISI), Jindal, Tata 23. Marine Plywood / BWP Ply Century, Green, Duro 24. Oil Bound Distemper Asian (Tractor), ICI (Maxi lite), Berger(Bison), Nerolac (NAD) 25. Sanitary fittings Parryware, Hindware, Cera, Johnson. 26. Plastic Connection Pipe Parryware, Kamal Delux . 27. Ply Wood Duroply, Green ply,Centurypoy 28. Pre-coated GI sheet for roofing Jindal Saw, Tata Blue Scope. 29. Polymer Modified Cementitious grout Bal-Endura, Pidilite, Ceco. 30. Pre-laminated Particle Board IS : 12823 (Gr-I, Type-II) Action TESA, Kitlam, Archid Ply, Asis, Green Lam 31. Primer Asian, ICI DuLux, Nerolac 32. PVC Rain Water Pipe & Fitting IS:13592 Type A Finolax, Supreme, Plasto. 33. PVC Shutter Rajshri, Sintex, Akal America. 34. PVC Tank (ISI Marked) Sintex, Star, Lotus, Plasto, Supreme. 35. R. C. C. Pipes (NP-2) ISI Make 36. Solid Plastic Seat Cover for EWC EWC standard seat cover white of Perryware/Hindware/ Neycer, Cera. 37. Stainless Steel Jindal Stainless Steel, Salem Steel 38. Stainless steel Sink with or without Draining board. Nirali, Hindware, Frankee, Cobra 39. Structural Silicon Sealant Dow Corning, Wacker, GE. 40. Structural steel section TATA, SAIL, RINL, Jindal. 41. Synthetic Enamel Paints ICI(Dulux),Asian (Apcolite),Berger (Luxol),Nerolac (NST) 42. Textured Exterior wall paint Snowcem, ICI dulux, Asian. 43. Towel Ring/Towel Rod/Towel Rack. Marc, Jaquar, 44. Tubular Section Windows M/S classic Engineers & Fabricator, Raipur, M/s JK Enterprises, Jaipur. 45. TMT Bars As per criteria laid down in Para 4.3 of Part-B 46. Vitrified Tiles First quality full body tiles of Orient Bell,Kajaria, RAK Ceramics, Johnson, NITCO, RESTILE. 47. Waste Pipe Kamal with brass checknut,Viking 48. Water Proofing Compound (Liquid) Pidiproof Ltd., Sico, Impermo 49. Wire mesh Sterling, Trimurty welded mesh. 50. White Cement JK, Birlaetc 51. Wall Putty JK, BIRLA, Asian 52. Work Stations/ Modular Furniture Godrej, Wipro 53. Stoneware pipe and Gully Trap Perfect or equivalent 54. PVC flushing System Parryware, Johnson, Commander 55. Tactile Tiles Johnson or equivalent 56. Plastic Emulsion Paint Asian, ICI, Berger, Nerolac 1 Carriage of Materials 1.1 By Mechanical Transport including loading,unloading and stacking 1.1.1 Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - Item to be applicable in urban areas having directions for restricted hours for movement/plying of load carrying motor vehicle of 3.5 cum or more. 5 cum 494.10 2470.50 Sub-Total 2470.50 2 CEMENT CONCRETE (CAST IN SITU) 2.1 Providing and laying in position excluding cement concrete of level: specified grade the cost of centering and shuttering - All work up to plinth 2.1.1 1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 0.65 cum 7878.50 5121.03 2.1.2 1:5:10 (1 cement : 5 coarse sand (zone-Ill) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) 0.6 cum 6518.60 3911.16 Sub-Total 9032.19 3 CLADDING WORK 3.1 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 10 sqm 1267.95 12679.50 Sub-Total 12679.50 4 WOOD AND P. V. C. WORK 4.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 4.1.1 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 4 sqm 2172.10 8688.40 4.2 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 4.2.1 200x10 mm 4 each 99.70 398.80 4.3 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 4.3.1 125 mm 3 each 66.25 198.75 4.4 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer- in-charge 4.4.1 Extruded section profile size 48x40 mm 5 metre 270.20 1351.00 4.5 Providing and fixing to existing door frames. 4.5.1 24 mm thick factory made PVC door shutters made of styles cleats. The shutter frame filled and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of H section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer- incharge. (For W.C. and bathroom door shutter). 2 sqm 2969.25 5938.50 Sub-Total 16575.45 5 STEEL WORK 5.1 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 5.1.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 49.2 kg 141.70 6971.64 5.2 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 5.2.1 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 25.6 kg 172.60 4418.56 5.3 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with: 5.3.1 4.0 mm thick glass panes 1 sqm 1064.65 1064.65 Sub-Total 12454.85 6 ROOFING 6.1 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. 1 each 298.25 298.25 6.2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 6.2.1 110 mm diameter 3 metre 377.40 1132.20 6.3 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion. 6.3.1 Bend 87.5° 6.3.1.1 110 mm bend 2 each 150.35 300.70 Sub-Total 1731.15 7 FINISHING 7.1 12 mm cement plaster of mix: 7.1.1 1:6 (1 cement: 6 coarse sand) 42.5 sqm 343.65 14605.12 7.2 15 mm cement plaster on rough side of single or half brick wall of mix: 7.2.1 1:6(1 cement: 6 coarse sand) 37.65 sqm 395.35 14884.93 7.3 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 7.3.1 Two or more coats on new work 100 sqm 155.90 15590.00 7.4 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 150 sqm 156.05 23407.50 7.5 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 7.5.1 One or more coats on old work 75 sqm 102.80 7710.00 7.6 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 7.6.1 Old work (Two or more coats applied @ 1.43 V/ 10 sqm) over existing cement paint surface 220 sqm 131.30 28886.00 Sub-Total 105083.55 8 REPAIRS TO BUILDING 8.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 8.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) 25 sqm 547.40 13685.00 Sub-Total 13685.00 9 Dismantling and Demolishing 9.1 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 9.1.1 Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) 0.5 cum 1503.60 751.80 9.2 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 9.2.1 Of area 3 sq. metres and below 2 each 367.20 734.40 9.3 Demolishing mud phaska in terracing and disposal of material within 50 metres lead. 86 cum 914.30 78629.80 9.4 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 37.65 sqm 54.65 2057.57 Sub-Total 82173.57 10 SANITARY INSTALLATIONS 10.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 10.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 1 each 6767.40 6767.40 10.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 10.2.1 Semi rigid pipe 10.2.1.1 32 mm dia 2 each 103.90 207.80 10.3 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 10.3.1 Rectangular shape 453x357 mm 1 each 1361.80 1361.80 Sub-Total 8337.00 11 WATER SUPPLY 11.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 11.1.1 20 mm nominal dia Pipes 10 metre 335.00 3350.00 11.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 11.2.1 20 mm nominal dia Pipes 10 metre 537.60 5376.00 11.3 Providing and fixing uplasticised PVC connection pipe with brass unions : 11.3.1 45 cm length 11.3.1.1 15 mm nominal bore 4 each 97.75 391.00 11.4 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 11.4.1 15 mm nominal bore 3 each 506.80 1520.40 11.5 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 11.5.1 15 mm nominal bore 5 each 574.30 2871.50 11.6 Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge. 5 each 74.80 374.00 Sub-Total 13882.90 12 DRAINAGE 12.1 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 12.1.1 100x100 mm size P type 12.1.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 1 each 2707.65 2707.65 13 WATER PROOFING 13.1 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-incharge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge”: 13.1.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm. 86 sqm 1684.60 144875.60 Sub-Total 144875.60 14 Market rates 14.1 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour Old work (two or more coats) 256 sqm 111.70 28595.20 Sub-Total 28595.20 15 Credit to unserviceable material received from dismantling. 15.1 Damaged unserviceable Wooden door 3 each -98.40 -295.20
