Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-10-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-10-2025 |
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each. complete all as specified and directed. |
| 2 | S&F for factory made PVC colour Sliding window Three track powder coated not less thane 50 micron made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. complete all as specified and directed. Note:The colour of windows shall be approved by GE. |
| 3 | Supply and fixing for factory made PVC colourpowder coated not less thane 50 micron casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Door profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement doorhandle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and complete all as specified and directed.Note:The colour of windows shall be approved by GE. |
| 4 | Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 all as specified and directed. |
| 5 | M&L for applying two coats ofsynthetic enamel paint over one coat of red oxide. complete all as specified and directed. |
| 6 | M&L for Anti-termite treatment at along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron etc. complete all as specified and directed. |
| 7 | M&L for Anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors etc. complete all as specified and directed. |
| 8 | S&F for Curtain rod side brackets of approved quality, complete all as specified and directed. |
| 9 | S&F in repair 25 mm dia decorative type CPstainless steel and all other connected works, complete all as specified and directed. |
| 10 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. complete all as specified and directed. |
| 11 | M & L for Granite18- 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of graniteflooringincluding 20 mm thick screed bedding in cement mortar 1: 6 and all other similar works. complete all as specified and directed. |
| 12 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises. complete allas directed. |
| 13 | M & L for 25mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in leveling course to floor or laid in any position. complete all as specified and directed. |
| 14 | M&L for double chargedVitrified Ceramic colouredtiles of size of tiles exc0.42 Sqm But Not Exc .1.0 Sqm in each tiles(square/ rectagular) polished,in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tiles including 15mmthick screed bed layer in CM (1:6). complete all as specified and directed. |
| 15 | S&F in 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed etc. complete all as specified and directed. |
| 16 | S&F in 125mm size Butt hinges, extruded brass, with brass hinge pin, bright pol ished and fixed, type B-11 etc. complete all as specified and directed. |
| 17 | S&F in 200mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed etc. complete all as specified and directed. |
| 18 | S&F in 150mm long floor door stopper ofbrass body and tongue with hard drawn steel spring fixed in floor etc. complete all as specified and directed. |
| 19 | S&Fin 150mm long Extruded brass handles, fabricated type polished etc. complete all as specified and directed. |
| 20 | S&F in repair venation blinds with roller or vertical type,level or ultima 100mm width of strip withnecessary pulling threads aluminium channel along with all arrangement fixed to wall. complete all as specified and directed. (Make : Vistaor equvalent). |
| 21 | Dismantling boarding, like wall paneling or false ceiling in any description, fixed in any position with nails, complete all as specified and directed. |
| 22 | S&F in5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, complete all as specified and directed. |
| 23 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing duly fitted into the wall etc. complete all as specified and directed. |
| 24 | S&F Plain fillets. square,rectangularin section exc 6 & not exc 13 Sqcm, clean sawn, secured with nails or brads. Etc. complete all as specified and directed. |
| 25 | S&F in 9mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work etc. complete all as specified and directed. |
| 26 | Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided for etc. complete all as specified and directed. |
| 27 | M&L for preparing old wooden surfaces of any description not otherwise described over 10cm in width or girth and applyingone coat of synthetic enamel painting. complete all as specified and directed. |
| 28 | Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster, complete all as specified and directed. |
| 29 | M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement. complete all as specified and directed. |
| 30 | M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, with mixing WPC @ 3% by wt of cement surfaces finished even and fair without using extra cement. complete all as specified and directed. |
| 31 | M&L for rendering 5mm thick in CM 1:3 finished even and smooth with out using extra cement in ceiling.complete all as specified and directed. |
| 32 | M&L for preparing new plaster surfaces of ceiling and applyingt three coats of white wash over coat of primer. complete all as specified and directed. |
| 33 | M&L for preparing decorated plastered or unplaster surfaces of walls, wall projection of face of chajja, projected face of roof slab and face and sides of sunshade etc. by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss and effloroscent salt and treating oil and greese spots and applying one coat of weather proof paint (exterior emulsion paint) in camouflage pattern using mechanical means (Two or more combination design, pattern and colour shall be as approved by GE or as per existing cover new plaster surfaces of walls. complete all as specified and directed. |
| 34 | Allas per No-33 above but two coat of weather proof paint (exterior emulsion paint)incamouflage pattern over one coat wall putty of minimum 1.5mm thickusing mechanical means (Two or more combination design, pattern and colour shall be as approved by GE or as per existing.complete all as specified and directed. |
| 35 | M&L for complete removal of existing treatmenton ceiling surface and applying two coats of white wash. complete all as specified and directed. |
| 36 | M&L for complete removing existing treatment on wall surface and applying two coats of oil bound distemper overover one coat of primer over 1 mm thick wall care putty complete all as specified and directed by Engr-in-Charge. |
| 37 | S & F for 12 mm thick plain toughened glass in doors/ windows framing doors handle, suitable hinges, rubber beading, floor spiring and all necessary fittings complete Including dismantling of old glass any type, complete all as specified and directed.Make- 1 Saint Gobin 2 Asahi 3 Atul Glass Industries 4 Golden Fish 5 Modi Guard 6 Hindustan Pilkington Glass as approved. |
| 38 | S&F for Providing & fixing false ceiling at all heights with fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG (Glass Fibre W Reinforced Gypsum) false ceiling tiles of per Size 595 x 595 mm of approved texture, 12 design and patterns having moisture mi content less than 2%, humidity resistance ed- of 99%, NRCO.50 to 0.75 as per IS:8225:1987, Non combustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200 mm and secondary intermediate cross-T of size 15 X 32 mmn of length 600 mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) te 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L -shape level adjuster of size 85x25x2mm Galvanised iron perimeter wall angle of size 24x 24x 0.40mm of length 3000 mm to be fixed on periphery wall partition with the help of plastic rawl plugs at 450 mm center to Center and 4Omm long dry wall wood screws, The work shall be Carriod out as per specifications, drawing and as per directions of the Engineer-in- Charge incl removal of existing falseceiling. |
| 39 | M& L for PCC 75mm thick type C-1 ,1:3:6 using 20mm graded stone aggregate as in plinth protection. complete all specifiedas directed. |
| 40 | M & L for machineprecast concrete Hydraulic pressed rubber moulded interlocking coloured paver block glossy finish any shape and size confirming to IS 15658 - 2006 of 60 mm thickness, M- 35 grade with grey cement and pigment including 40 mm thick sand cushioning layer. complete all as directed and specified. |
| 41 | M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface. complete all as specified and directed. |
| 42 | M&L forPCC 1:4:8 type D-2 (40mm graded aggregate) Cement concrete in foundations filling and mass concrete etc. complete all as specified as directed. |
| 43 | M&L for preparing Newplaster,brick or concrete surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of floor coat emulsion paint over a coat priming paints.complete all as specified and directed. Make : INDIGO / Equivalent as approved. |
| 44 | S & F for powder coated aluminium sections for doors, windows, ventilators, door partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, and rubber beadings for fixing glass panes in frame, complete all as specified and directed. Note : (i) Glass panes will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading however it will be not be weighed and not paid separately.(iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.(iv) Windows all around will be sealed with silicon sealant.Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India. |
| 45 | S&F in repair for galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple, complete all as specified & directed. |
| 46 | M&L for 5.0 mm thick sheet glass tinted colour frostedordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane, complete all as specified & directed. |
| 47 | S & F 18-19 mm thick HDHMR board prelaminated one side with decorative choice lamination exterior grade , fixed with screw /hinges with frame wk as in cupboard and kitchen cabinet shutters and all other similar wks, complete all as specified and directed. Make action tesla/grren ply/century ply or equivalent. |
| 48 | S&F in Cast brass handles, each 150mm long. complete all as specified and directed. |
| 49 | S&F in Cast brass handles, each 100mm long. complete all as specified and directed. |
| 50 | S & F incast brass butt hinges medium weight cold rolled 100 mm long. complete all as specified and directed. |
| 51 | S & F in cast brass butt hinges medium weight cold rolled 75 mm long. complete all as specified and directed. |
| 52 | S & F in magnet catcher for cupboard. complete all as specified and directed. |
| 53 | Demolition of Mud/mud puska in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof). complete all as specified and directed. |
| 54 | M&L for cutting out cracks to v-section in existing roofs or terraciv cleaning grouting with cement and sand slurry 1:3. complete all as specified and directed. |
| 55 | M&L for cutting grooves in brick wall 75mm wide and 65mm deep & shaping horizontal face of groove with cement . complete all as specified and directed. |
| 56 | M&L for PCC 1:3:6 type B-1(using 20mm graded stone aggregate) for providing cement concrete as levelling and roof kerbs or mud stops, including finishing the surface with grinder to receive the acrylic based water proofing material, rounded or chamfered on edges etc. complete all as specified and directed. |
| 57 | M&L for preparation of new surface andapplying a coat of hot blown bitumen of grade 85/25 conforming to IS 702 over primed surface of roof slab @ 1.20 Kg/Sqm. complete all as specified and directed. |
| 58 | M&L for APP basedpolymeric water proofing membrane minimum weight 3.5 Kg/ Sqm and minimum 3mm thick reinforced with polyster non wove fabrick (Weight not less than 150gms/Sqm or as per IS),laid over hot bitumen surface by torched application with the strict supervision of manufacturers technical supervisor. Membrane shall be laid with 100mm side/end lap on prepared surface as per manufacturer instruction work shall be carried out strictly with the technical tradesmen and supervision of technical staff of manufacturer. complete all as specified and directed. |
| 59 | M&L for renderingor bedding layer 15mm thick in cement mortar (1:3) cover concrete surfaces of roof, mixed with linesed oil @ 3% wt of cementinclduing finishing surfaces even and fair without using extra cement inclusive linesed oil. complete all as specified and directed. |
| 60 | Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. |
| 61 | S&F in repair Aluminium die cast body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg. complete all as specified and directed. |
| 62 | Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each. complete all as specified and directed. |
| 63 | S&F in repair 25 mm dia decorative type C chromium plated anodised aluminiumalloy with fixing brackts and all other connected works, complete all as specified and directed. |
| 64 | S&F for Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. |
| 65 | S&F for Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. |
| 66 | S & F for factory made single extruded WPC (Wood Polymer Composite) solid door Frames/ Chowkhat comprising of 62 mm x 32 mm size applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum specification as per IS 15931: 2012 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast unserviceable fast/lugs/SS dash fasteners of required dia and length. complete all as specified and as directed by Engr-in-Charge.Make:- M/s Navratan Specialty Chemical LLP (Gujrat)/ M/s Sintex Industries Ltd/ M/s Accucell/ M/s Dura Plast Extrusion. |
| 67 | S&F for Second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. complete all as specified and directed. |
| 68 | S&F for Second class hardwood Flush shutters 35mm thick, solid core construction, with block board core & plywood face panels, commercial type on both sides. complete all as specified and directed. |
| 69 | S & F for factory made28-30 mm thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size,modulus of elasticity 850 N/mm” and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof specification as per IS 15931: 2012 and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws. complete all as specified and as directed by Engr-in-Charge.Make:- M/s Navratan Specialty Chemical LLP (Gujrat)/ M/s Sintex Industries Ltd/ M/s Accucell/ M/s Dura Plast Extrusion. |
| 70 | M&L for verified ceramic double charged digitalcoloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry over 15 mm thick screed bed in cement mortar 1:6 and pointed in white or coloured cement to match,complete all as specified and directed. |
| 71 | M&L verified ceramic double charged digital coloured ceramic tiles 7 to 8 mm thick on vertical surfaces such as kirting dado (Square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over rendering 10 mm thick on fair faces of brick work in CM (1:4). complete all as specified and directed. |
| 72 | M&L forNon Skid ceramic coloured tiles 7 to 8 mm thickjoint free (square/ rectagular) area of each tile exceeding 0.06 sq m but not exceeding 0.11 sqm,in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchthe shade of tile and laid over and inclduing 15mm thick screed bed layer in CM (1:6). complete all as specified and directed. |
| 73 | M&L for digital coloured glazed ceramic tiles 300x450x7mm or 600 x 300 x 7 mm thick in vertical surfaces (including designed borders ) such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match over rendering 10 mm thick on fair faces of brick work in CM (1:4).complete all as specified and directed.Note:- (Rate of Designer border in vertical surface will be deemed into quoted rates) Make for Item No. 70, 71, 72 & 73 M/s H R Johnson/M/s Kajaria/M/s Somany Tiles Ltd. |
| 74 | S&F in repair 250 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) ISI marked and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy. complete all as specified and directed. |
| 75 | S&F in repair 150 mm long Aluminium anodised barrel tower boltsof extruded section and fixed. complete all as specified and directed. |
| 76 | M&L preparing old wooden surfaces of any description not otherwise described over 10cm in width or girth and applyingone coat of synthetic enamel painting. complete all as specified and directed. |
| 77 | Supply & fix in repairs,stop cock, (Consealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union of size 15mm. complete all as specified and directed. |
| 78 | S&F in repair 15mm bore dia CPbib tap cast copper alloy with crutch or butterfly handles , screwed down, screwed for iron pipe or for brass ferrule.complete all as specified and directed. |
| 79 | M & L for PVC waste pipe 32/40 mm for sink/WHB etc. complete all as specified and directed. |
| 80 | S&F in Grating round 140 mm size of PTMT. (Minimum weight 50gms). complete all as specified and directed. |
| 81 | M&L for preparation of new/ old plaster surfaces of walls and applying two coats of oil bound distemper over one coat of primer including 1 mm thick wall care putty.carcomplete all as specified and directed by Engr-in-Charge. |
| 82 | Demolition to reinforced cement concrete of roofs, floors (other than ground floors) beams staircases, landing, chajjas and similar suspended work. complete all as specified and directed. |
| 83 | M&L for formwork to soffits and suspended slabs such as roof slabs floor slabs landings and similar work not exceeding 200mm thick (horizontal or sloping). complete all as specified and directed. |
| 84 | S&F in Mild steel TMT bars 6mm to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed. |
| 85 | M&L for reinforced Cement concrete (1:2:4) type B-1, ( 20 mm graded aggregate ) as in chajjas/roof projection/RCC railingrepairs as in similar work. complete all as specified and directed. |
| 86 | S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including pvcwaste pipe, CP waste coupling,bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm. complete all as specified anddirected. |
| 87 | S&F in 1mm thick stainless steel kitchen plate rack of size 750x 900mm best quality assembled with brass washer and nut and bolts including hooks (spoon/cup holders). complete all as specified and as approved by GE. |
| 88 | S&F in repair Toilet paper Holder fixing to wall, complete all as specified.Make:-Jaquar Cat No.ACN-1151N or equivalent of makes as specified in the list of makes. |
| 89 | S & F in repairs vitreous china wash down, white, water closet pan (pedestal pattern) with \"P\" of \"S\" trap (of size 465mm x 355mm x 265mm),including plastic seat cover to match with colour of WC, closedpattern with flat bottom & cover and chromium plated mild steel or aluminium anodized hinging device including connecting to trap and flushing pipe, anti-syphonage pipe etc and screwed with brass screws to sheesham wood plugs embedded in floor. complete all as specified anddirected by Engineer-in-Charge. Make:- Cera Cat Part No S1053121 or Equivalent of JAQUAR//PRAYAG as approved. |
| 90 | S&F in repair jet spray with flexible pipe and holding screw other fittings etc. complete all as specified and directed. |
| 91 | S&F in repairs PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including dual flushball valve float & handle, waste pipe & brackets complete set complete all as specified and directed. |
| 92 | S & F wash basins, vitreous china, white, flat back,of size 550mm x 400mm x 140mm or nearest size conforming to model \"CALBURT\" Cat No. S2020137 of CERA or of equivalent model in other makes as listed in Appendix \"C, with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and table top basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant. complete all as specified anddirectedby Engineer-in-Charge. |
| 93 | S&F in repair Waste coupling of PTMT (half or full threaded) . (Minimum weight2mm45gms/40mm 60 gms waste pipe of 40mm dia suitable for WHB, kitchen sink. complete all as specifed and directed. |
| 94 | S&F in repair angle cock fancy type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed. |
| 95 | S&F in repairs bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed. |
| 96 | S&F in repair 15 mm bore pillar taps swan neck cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred \"HOT or COLD\" with long screwed sunk and fly nuts. complete all as specified and as directed by Engr-in-Charge. Make:- Cera Cat Part No F 2008105 or of equivalent model as per list of makes. |
| 97 | S&F in repair Wall mixer with 115mm long Bend pipe ,connecting legs & wall Flange. complete all as specified and directed. Make : Jaquar Cat No.CON-281KN or equivalent of makes as specified in the list of makes. |
| 98 | S&F in repairPVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and as directed. |
| 99 | Dismantlingtanks water tank exc 250 but n exc 500 ltr. complete all as specified and directed. |
| 100 | S&Frotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top), triple layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with fitting etc. of 20 mm dia directed. complete all as specified and as directed. |
| 101 | S&F ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 gms. complete all as specified and as directed. |
| 102 | S& F Stop valves/Gate valves 25 mm dia cast copper alloy,screwed down, high pressure with crutch or butterfly handel, screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed. |
| 103 | Taking up or down steel tubing and connection including cleaning for refixing or removal to store for 15 mm bore. complete all as specified and directed. |
| 104 | Taking up or down steel tubing and connection including cleaning for refixing or removal to store for 20 mm bore. complete all as specified and directed. |
| 105 | S&F tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floor for 15 mm bore. complete all as specified and directed. |
| 106 | S&F tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floor for 20 mm bore. complete all as specified and directed. |
| 107 | M&L for rendering or bedding layer15mm thick in cement mortar (1:3) cover concrete surfaces of roof, mixed with WPC 2% wt of cementinclduing finishing surfaces even and fair without using extra cement. complete all as specified and directed. (Note: WPC will be measured and paid separately). |
| 108 | M&L for applying one coat of aluminium paint at the rate of 100 gms/sqm as per manufacturers instructions over bituminous layer. all as specified and directed. |
| 109 | Demolition of PCC in ground floor & pavings n.exc 15 cm thickness below or above GL, complete all as specified and directed. |
| 110 | M & L for machineprecast concrete Hydraulic pressed rubber mouldedinterlocking paver block glossy finish any shape and size confirming to IS 15658 - 2006 of 80 mm thickness, M- 40 grade with grey cement and pigment including 40 mm thick sand cushioning layer, complete all as directed and specified |
| 111 | M& L forSand filling under floor including watering and consolidation. complete all as specified and directed. |
| 112 | M&L for PCC 1:2:4 Type B1using 20mm graded aggregate as in kerb stone in sides of inerlocking tiles including slightly rounded or chamfered angles and throating as. complete all as specified and directed. |
| 113 | S&F in repair CP vitreous china soap dish fancy type. complete all as specifed and directed. |
| 114 | S&F in 600 mmx450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC buildg board or commercial plywood and fixed to wooden plugs with CPbrass screws and cup washers. complete all as specified and directed. |
| 115 | S&F in repairBrass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, completed all as specified and directed. |
| 116 | S&F in repair brass chromium plated shower roses with swivel joints, 125 mm sizein square with CP long shank arm including fixing to steel pipe or union, complete all as specified and as directed. |
| 117 | S & F in repairPVC fiber sheet corner shelf with complete all as specified and directed. |
| 118 | Taking down carefully aluminium battenpoint, wiring for light/fan/socket/bell or power point including. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders etc. Complete and making good disturbed surfaces of wall/floor to match with the surroundings of wall/ceiling/floor etc including taking down old light fittings. Note :- (i)Contractors quoted rate of this item deemed inclusive of unscrewing of the serviceable fittings and fixture as directed and deposit in MES store yard. (ii)Quoted rate also deem to be included cost of cutting chases for taking out concealed conduit and nitch for terminal box. (iii)Decision of GE shall be final and binding in respect of serviceability of fittings/fixture. |
| 119 | M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through new PVC concealed conduit mediem grade, ISI markedand including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing switches , socket outlet and fan regulators etc, complete all as specified and as directed for the followings:- Note : The cost of modular type box and modular accessories like inner/outer cover plates etc will be included in quoted rates. |
| 120 | (a)One light/fan/bellpoint controlled by one switch single pole one way |
| 121 | (b) All as per item No 119.01here-in-before butone3 pin 6 amp switch socket out let independent. |
| 122 | (c) All as per item No119.01 here inbefore but one 3 pin 6 amps socket outlet on the same board with other switch, complete all as specified and directed. |
| 123 | All as per item No 119.02 here-in-before but using 02 Nos. 4.0 sq mm size for main cable and 01 No.4.0 sq mm size as earth conductor for one 16 Amp switch socket outlet on independent board. |
| 124 | Supply and fixing switch modular flush 6A single pole one way ISI marked. complete all as specified and directed. |
| 125 | Supply and fixing modular sockets 6 Amp 2 in 1 2/3 pin combined, complete all as specified and directed. |
| 126 | Supply and fixing switch modular flush type 15/16 Amp single pole one way 240 volt one module ISI marked, complete all as specified and directed. |
| 127 | Supply and fixing modular sockets 16Amp 2 in 1 3/5pin combined, complete all as specified and directed. |
| 128 | Supply and fixing ceiling rose surface bakelite 60x25mm three terminal. complete all as specified and directed. |
| 129 | Supply and fixing electronic step type fan regulator 240 volt 50 Htz 120 watt (switch/sockets type in shape) modular type. complete all as specified and directed. |
| 130 | Supply and fixing in LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose. complete all as specified and directed. |
| 131 | Supply and fixing in LED 2 X 2 ft backlite surface mounted fitting 36 Wattsnot less than 3200lm with Metallic CRCA powder coated body with high efficiency opal/PMMA diffuser with system efficacy > 80 lm/W, CRI>80, color temperature >5700k, IP 20, Power factor<0.95, THD<10%, 50000 burning hours,Ambient temperature 0 to 500 DegC, Driver should meet IEC complaint for safety, with voltage variation range of 150-270 V and surge protection of 2.5 KV including necessary fixing arrangementsfixed completeallas specified and directed. |
| 132 | Supply and fixing inwall mounted fan 400mm, 230 volts , 50 Hz 1200-1600RPM with 90 degree oscillation and having speed control by twopull cord system. complete all as specified and directed. |
| 133 | Supply & fixing in MCB DB SPN 8 way, double door, IP-43, IK-09, Isolated Neutral Bar and fixed flush to wall and suitable for universal mounting. completeall as specified and directed. |
| 134 | Supply & fixing in MCB SPN 32Amps 240 volts 10 KA 50 HZ \"C\" curve. complete all as specified and directed by Engineer in charge |
| 135 | Supply & fixing in MCB SP 6-32 Amps 240 volts 10 KA 50 HZ \"C\" curve. complete all as specified and directed by Engineer in charge |
| 136 | Supply & fixing in sheet metal enclosure with socket and plug top and MCB single pole and neutral enclosure with two Pin and earth plug and socket complete with one single pole MCB, 240 V, 20 Amp. |
| 137 | Supply & fixing in Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 32A. complete all as spd and directed. |
| 138 | Supply & fixing in casing caping medium grade 4\" size good quality for cable/wire dressing. complete all as specified and directed. |
| 139 | Supply & fixing in Sub main wiring complete with two runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistrandedcopper conductor cable with one run of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistrandedcopper conductor cable as earth continuity conductor, drawn throughPVC conduitin concelaed all as specified and as directed. |
| 140 | Supply & fixing in Sub main wiring complete with four runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistrandedcopper conductor cable with one run of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistrandedcopper conductor cable as earth continuity conductor, drawn throughPVC conduitin concealed all as specified and as directed. |
| 141 | Supply & fixing inSub main wiring complete with two runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistrandedcopper conductor cable with one run of 6 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistrandedcopper conductor cable as earth continuity conductor, drawn throughPVC conduitin concelaed all as specified and as directed. |
| 142 | Material, labour jointing & testingXLPE insulated armoured heavy duty electric cable with standard aluminium conductor, 1100 volts grade, cross-sectional area 185 Sqmm3.5 core including making connection with suitable size of cable gland, aluminium lugs etc complete including taking down old U/S cable. complete all as specified and directed. |
| 143 | Excavation in trenches in soft/loose soil n. exc 1.5 Mtr wide and not exc. 1.5 M deep and getting out including forming bottom surface for laying of pipes. complete all as specified and directed. |
| 144 | Returning filling in including spreading, leveling, watering and well ramming in layers not exc 25 mm thick. complete all as specified and directed. |
| 145 | Removal of excavated material to a distance not exc 50 Meter and depositing wheredirected at a level not exc 1.5 M above the starting point. complete all as specified and directed. |
| 146 | Supply and laying sand dry as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 cm (15 cm under the cable & 8 cm over the cable) and gently punned down to 18 cm thickness, all complete as specified and directed.(Note - Only punned thickness will be measured for payment purpose) |
| 147 | Supply and laying bricks (old size) for cable protection by using common burnt clay building bricks, sub-class \"B\" of size 230x11.5x7.5 cm having crushing strength not less than 75 Kg/sqcm, laid dry flat across length of the cable with width of the trenches equal to length of bricks, all complete as specified and directed. |
| 148 | Supply & Fixing in replacement GI tubing light grade in trenches/fixed to wall/ceiling including required GI fitting of size 40mm dia. complete all as specified and directed. |
| 149 | S&F in factory made epoxy powder coated Distribution board (MCCB DB) TPN 4 way vertical type, IP - 43 Protection made out of min 1.6 mm thick CRCA sheet, fabricated, metal double door fixed to wall and suitable for universal mounting and including 200 Amps rated copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removeable gland plated with knockouts and suitable for TPN MCCB 125/160 Amps as incomer and 12 SP or 04 Nos TP MCBS as outgoing complete all as specified and confirming to IS : 8623. complete all as specified and directed. |
| 150 | Supply and fix in repair MCCB 200 Amps, FP 415 volts 10 KA 50 HZ with thermal magnetic setting. complete all as specified and directed by Engineer in charge. |
| 151 | M&L for Modular switch 1 way 16A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge. |
| 152 | S&F in Modular Fan step regulator, 120W - 2 module. complete all as specified and directed. |
| 153 | Supply and fixing in 4 Module Gang box including Modular socket outlet 16 Ampsfor AC, 240 Volts flush type white finish including plug top 20 Amps with modulartype switch 20 Amps and LED indicator (RED) incl concealed point wiring on wall and surface wiring on ceiling/roof with necessary arrangements with 4 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor with andincluding PVC concealed conduit of medium grade with all fittings and Modular white cover plate with frame 4 module to accommodate all theaccessories complete with internal connections, fixed with chromium plated screws and washers for switches and sockets, including 4 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dollyand including cutting chases in walls / floors for concealed conduitandmaking good disturbed surfaces by cement mortar (1:3) and to match with the existing surface/colour by using existing oil bound distemper/white wash. complete all as specified and as directed. |
| 154 | Supply and fixing in LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size.complete all as specified and as directed. |
| 155 | Supply and fixing in LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection. complete all as specified and as directed. |
| 156 | Supply and fixing in replacement GI Pipe bend to shape 1.5 mtr (32/40mm dia as required at site) with two Nos clamps made out of 50x6mm flat and two Nos bolts with nuts duly grouted in wall or fixing on wall. complete all as specified and directed. |
| 157 | Supply and fixing in factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, stranded DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts. complete all as specified & directed. |
| 158 | Supply and fixing in fresh air fan made of sturdy Engineering plastic complete with louvers shutters, 350mm sweep, single phase, 230 Volts AC, 1200 RPM, ISI marked fixed properly at directed location with provisioning of suitable fixing/tightening arrangements and connecting/testing. complete all as specified and directed. |
| 159 | Cutting the existing wall/removing existing steel bar to make a hole for fixing of ventilation fan through packing of wooden ply to support the ventilating/ air circulating fan including necessary nut and bolts of suitable size incl making good of disturbed surface, complete all as directed by Engr-in charge. |
| 160 | S&F in replacement ceiling fans Robust and reliable inverter motorcomplete with blades, down rods, canopy, remote and remote cellwith other accessories, 230 V, 1200 mm sweep. powered by ECM technology , BEE. 5 star rating with brushless direct current motor (BLDC) including connection with three core flexible copper conductor cable of suitable size from ceiling rose to connector of fan. complete all as specified and as directed.Note : Rate quoted under this item is inclusive of cost of remote and remote cell. |
| 161 | Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) under ground cable with 1100 volts grade with stranded aluminium conductor of sizes 16 Sqmm 4 Core. complete all as specified and directed. |
| 162 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, buried directly in to ground (earth pit) not less than 2.25 metres deep below GL with top edge of earth plate opt less attn. 1.50 m below ground levelsurrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, connected to GI lead strip of 32x6 mm dia.(7.50 m Long) by means of nuts, bolts and washers, check nuts of GIand protected by the GI pipe light grade 15 mm nominal bore(7.5 m long) for earth lead wire and watering pipe light grade of 20 mm nominal bore, 0.63 mm thick G I sheet funnel , wire mesh, earthing test pointetc complete including necessary earth work and excavation in any type of soil , PCC 1:2:4 type B1 earth pit and Precast RCC cover 65 mm thick duly reinforced with 6 mm dia. MS round bars @ 100mm C/C both ways, with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as describedin electric plate of SI Part I completeall as specified and directed and testing on completion. Note :- Ifthe desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. |
| 163 | Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
