|
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each, complete all as specified and as directed by the Engineer-in-Charge. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 sq. meach complete all as specified and as directed by the Engineer-in-Charge. |
| 3 | S&F for powder coated aluminium anodised window openable/fixed type/three track sliding type weighing not less than 1.35 Kg/RM including 5mm thick glass and wiremesh fixed with beading & rubber gasket. The aluminium member of shutter is 65x40mm alongwith aluminium handle & tower bolt / locking device for sliding shutters etc. complete in all as specified and directed. |
| 4 | S&F for powder coated anodised aluminium frame partition including 5mm thick glass/wiremesh with door shutters with rubber gasket, joining cleat for fixing etc. complete all as specified. |
| 5 | S&F for Mortice lock, brass 4 lever vertical type, size 65 mm etc. complete all as specified and directed. |
| 6 | Dismantling boarding, like wall paneling or false ceiling in any description, fixed in any position with nails, complete all as specified and directed. |
| 7 | Supply and fix of 17 to 19 mm thick HDHMR Board with desired colour sunmica put on board with adhesive to make kitchen cabinet Shelves incl taking down of old unserviceable board,Complete all as specified and directed.(Note: Fabrication and installation work to be carried out by authorised Fabricator only). |
| 8 | Supply and fixing of sunmica on old surface of kitchen cabinate/cupboard with adhesive etc, complete all as specified and directed. |
| 9 | S&F for 200mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed etc, complete all as specified and directed. |
| 10 | S&F for 150mm long Extruded brass handles, fabricated type polished etc, complete all as specified and directed. |
| 11 | S & F for Continous (piano) hinges, mild steel bright finished or electro qalvanized, width of flaps(When open)30mm, complete all as specified and directed. |
| 12 | S&F for telescopic channel of Mild steel in kitchen and warddrobe drawers of size of 30cm to 45cm in lengthfixed with screws etc, complete all as specified and directed. |
| 13 | S&F for stainless steel magnetic catcher, complete all as specified and directed. |
| 14 | S&F in repair new bevelled edged looking mirror of selected quality glass including designer eatching border mounted with SS studs on wall, complete all as specified and directed. |
| 15 | Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster, complete all as specified and directed. |
| 16 | M&L for rendering 15mm thick in cement mortar (1:4), on fair faces or brick work or concrete surfaces, finished even and other than fair face, complete all as specified and directed. |
| 17 | Dismantling floor hearth or wall tilling including cement mortar bedding, removing serviceable tiles to stack and rubbish off the premises, complete all as specified and directed. |
| 18 | M&L for 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in leveling course etc,complete all as specified and directed. |
| 19 | M&L for Vitrified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.34 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchincluding 15mmthick screed bed layer in CM (1:4) for lying floor finished, complete all as specified and directed. |
| 20 | M&L forNon Skid ceramic tilescoloured (square/ rectagular) area of each tile exceeding 0.09 Sqm but not exceeding 0.38 Sqm in floors etc. setand jointed in neat cement slurry and pointed in white or coloured cement to match including 15mmthick screed bed layer in CM (1:4) for lying floor finished, complete all as specified and directed. |
| 21 | M&L for Glazed ceramic coloured tiles area not exceeding 1.0 Sqm, 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to matchthe shade tile over and inclduing 10mm thick rendering in CM (1:4), complete all as specified and directed. |
| 22 | S&F for centralised control system made of anti-finger print stainless steel body, with thermostat mixer and 40 cm stainless steel barbed hose, multifunction water diverter for top shower, 1.5cm stainless steel double locked flexible hoses, complete all as specified and directedas approved by GE. |
| 23 | Supply and fixed in repair One piece Vitreous china wash down water closet (Pedestal Pattern) size 645mmx35mmx730mm \"white\" with soft close seat cover & twin flush fittings, etc all as specified in Particular specifications.Make : Jaquar CAT No.FSS-WHT-29853S300UFSM/ Hindware Cat No.92595 Italian Collection Cora S-220 or equivalent as approved by GE. |
| 24 | Supply and fix in repair vitreous china counter wash hand basin snow white miniumum size560mmx470mm fixed in grante slab including angle iron brackets below granite slabs & chromium plated brass coupling, complete all as specified in particular specifications. Make : Jaquar CAT No. JDS-WHT-25931/Hindware Cat No.91008 Italian Collection or equivalent as approved by GE. |
| 25 | M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,complete all as specified and directed. |
| 26 | S&F in repair bottle trap with necessary assembly etc, complete all as specified and directed. Make JAQUAR CAT No. ALD-CHR-769L250X190/Hindware Cat No.F850003CP or equivalent as approved by GE. |
| 27 | S&F in chromium plated brass centre hole hot and cold mixer fixed in wash hand basin etc, complete all as specified and directed. Make : Jaquar CAT No FLR-CHR-5167NB/Hindware Cat No.F530014CP or equivalent as approved by GE. |
| 28 | S&F in PVC braided connection, complete all as specified and directed. |
| 29 | S&F in toilet paper holder, complete all as specified and directed. Make : Jaquar CAT No.ACN-CHR-1153S/Hindware Cat No.F450027CP or equivalent as approved by GE. |
| 30 | S&F in 10mm thickToughned glassas in hinged / sliding doors, partitions automatic doors and similar work including cutting to shape, drilling holes and reqd fixing all accessories like clamps cleat, fixing channel / Rod & Handle for door required etc,complete all as specified and directed. |
| 31 | S& F in repair Towel rail 600mm, complete all as specified and directed. (Make Jaquar or equivalent). Jaquar cat no:ACN-CHR-1111SM/Hindware Cat No.F580012CP or equivalent as approved by GE. |
| 32 | S&F in repair Towel ring, complete all as specified and directed. (Make Jaquar equivalent). Jaquar cat no: AKP-CHR-35721P/Hindware Cat No. F580003CP or equivalent as approved by GE. |
| 33 | S&F in repair SOAP DISH holder,complete all as specified and directed. (Make Jaquar . Jaquar cat no: AKP 35731P/Hindware Cat No. F880011CP as approved by Engr-in-charge. |
| 34 | S&F in repair Towel rack with lower hanger 600mm, complete all as specified and directed. (Make Jaquar or equivalent). Jaquar cat No:AKP 35781P/Hindware Cat No.F880008CP as approved by Engineer-in-Charge. |
| 35 | S&F in repair SOAP dispenser with glass bottle holder, complete all as specified and directed. (Make Jaquar or equivalent). Jaquar cat no:ACN-CHR-1135N/Hindware Cat No.F860060CP or equivalent as approved by GE. |
| 36 | S&F in repair two way bib taps chromium plated cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe of bore 15mm, complete all as specified and directed. Make JAQUAR CAT NO.FLR-CHR-5041N/Hindware Cat No. F530004CP or equivalent as approved by GE. |
| 37 | S& F in Mild steel chromium plated grating 100 mm dia, fixed in repairs to Nahani traps, complete all as specified and directed. |
| 38 | S&F in Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect, complete all as specified and directed. Make : Jaquar CAT Part No.ALD-CHR-573/Hindware Cat No.F160110CP or equivalent as approved by GE. |
| 39 | S&F in angular stop cock (valve) with flange etc, complete all as specified and directed.Make : Jaquar CAT No. OPP-CHR-15083KPM/Hindware Cat No.F410006CP or equivalent as approved by GE. |
| 40 | S&F in repair fancy type glass corner shelf with CP brackets etc, complete all as specifed and directed. Make : Jaquar CAT No. ACN-CHR-1173 Glass Shelf - (Wall Mounted)/Hindware Cat No.F870011CPor equivalent as approved by GE. |
| 41 | S&F in repairsheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete.Make: Jaquar Kubix Prime AKP-CHR-35771P)/Hindware Cat No.F880010CP or equivalent as approved by GE. |
| 42 | M&L for fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. complete all as specified and directed. |
| 43 | Taking down 15 mm dia steel tubing and connections including accessary etc, all as specified and directed. |
| 44 | Supply and fixing 15 mm bore galvanised steel water tubing \"medium grade\" with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed. |
| 45 | Taking down 20 mm dia steel tubing and connections including accessary etc all as specified and directed, complete all as specified and directed. |
| 46 | Supply and fixing in 20 mm bore galvanised steel water tubing \"medium grade\" with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed. |
| 47 | S&F in automatic self closing hinges etc, complete all as specified and directed. |
| 48 | S&F in repair curtain rods 20 mm bore, mild steel, chromium plated with fixing brackets, stops, rollers, knobs/finials etc, complete all as specified and directed. |
| 49 | Dismantling of plain or corrugated steel sheeting any gauge thicknessincluding nainital or similar pattern, complete all as specified and directed. |
| 50 | S&F in Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensil strength of 550 Mpa as in roof covering to wall fixed with self tapping screws, complete all as specified and directed. |
| 51 | M&L for 10 mm thick vitrified anti skid Endura max grip with pavement tiles each tile not exceeding 0.36 Sqm in floors etc coloured for floor / pavement etc & jointed in neat cement slurry and pointed with white cement mixed with colour pigment to match colour of tiles, complete all as specified and directed. |
| 52 | M&L for preparation of old decorated surface of ceiling and applying applying one coat ofoil bound distemper, complete all as specified and directed. |
| 53 | M & L forcomplete removal of existing treatment and applying 1.5 mm thick wall care putty with two coat plastic emulsion paint, complete all as specified and directed. |
| 54 | M&L for Preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent saltand treating oil and greasy spots and applying one coat of weather proof paint (Exterior emulsion paint)Using Mechanical means, complete all as specified and directed. |
| 55 | M&L for Preparation of old decorated plastered surfaces of walls including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt andtrading oil and greasy spots and applyingone coat of cement base paint of approved colour, complete all as specified and directed. |
| 56 | Material & Labour for providing and fixing stainless steel (Grade 304) railing/ladders made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed. |
| 57 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 58 | M&L for concealed point wiring on wall and surface wiring on ceiling/roof with necessary arrangements with 1.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor with andincluding PVC concealed conduit of medium grade with all fittingsincluding Modular metal flush box minimum 1.6 mm thick, Modular white cover plate with frame, of required module at site, fixed with chromium plated screws and washers for switches and sockets, including 1.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dollyand including cutting chases in walls / floors for concealed conduitandmaking good disturbed surfaces area by cement mortar (1:3) and to match with the existing surface/colour by using existing oil bound distemper/white wash complete all as specified and directed for the following:-Note: - Cutting chase to wall wherever required shall be included in the rate quoted for point wiring. |
| 59 | (a) One light, fan, bell point controlled by one switch. |
| 60 | (b) One 3 pin switch socket outlet point 5 Amps on same board with other switch. |
| 61 | Ditto as above Ser Item No. 58.01 above but with 2.5 sqmm copper conductor cable for One 5 Amps socket outlet on independent board. |
| 62 | All as per item No 58.02 here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 Sqmm size. |
| 63 | M&L for concealed point wiring on wall and surface wiring on ceiling/roof with necessary arrangements with 4 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor with andincluding PVC concealed conduit of medium grade with all fittingsincluding Modular metal flush box, Modular white cover plate with frame, of required module at site, fixed with chromium plated screws and washers for switches and sockets, including 4 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dollyand including cutting chases in walls / floors for concealed conduitandmaking good disturbed surfaces by cement mortar (1:3) and to match with the existing surface/colour by using existing oil bound distemper/white wash complete all as specified and directed for Power socket 15 Amps on independent board. |
| 64 | M&L for Modular switch 1 way 6A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer-in-Charge. |
| 65 | Supply and fixing in Modular socket outlet 2 in 1, 5 pin, 6 Amps flush type white finish complete all as specifiedand as directed. |
| 66 | M&L for Modular socket outlet 2 in 1, 6 pins 6A and 16A, combined 2 module, complete all as specified and directed by Engineer-in-charge. |
| 67 | M&L for Modular switch 1 way 16A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer-in-Charge. |
| 68 | S & F in ceiling rose surface backlite 65x50mm 3 terminals complete. |
| 69 | Supply and fixing in amp holder PVC body with back plate completeall as specified and directed. |
| 70 | S&F in Modular Fan step regulator, 120W - 2 module complete all as specified and directed. |
| 71 | M&L forModular bell push 5 Amps 230 V, AC circuit complete all as specified and directed. |
| 72 | M&L for call bell ding dong 230 V AC circuit complete all as specified and directed by Engineer-in-Charge. |
| 73 | Supply and fixing in replacement white cover plate with frame two module for modular switchesand sockets complete all as specified and directed. |
| 74 | Supply and fixing in replacement white cover plate with frame three module for modular switchesand sockets complete all as specified and directed. |
| 75 | Supply and fixing in replacement white cover plate with frame four module for modular switchesand sockets complete all as specified and directed. |
| 76 | Supply and fixing in replacement white cover plate with frame six module for modular switchesand sockets complete all as specified and directed. |
| 77 | Supply and fixing in replacement white cover plate with frame eight module for modular switchesand sockets complete all as specified and directed. |
| 78 | Supply and fixing in replacement white cover plate with frame twelvemodule for modular switchesand sockets complete all as specified and directed. |
| 79 | Supply and fixing in replacement white cover plate with frame Eighteen module for modular switchesand sockets complete all as specified and directed. |
| 80 | Supply and fixing in metal flush box 1/2 modul 1.6 mm for mounting modular switches and sockets complete all as specified and directed. |
| 81 | Supply and fixing in metal flush box three module 1.6 mm for mounting modular switches and sockets complete all as specified and directed. |
| 82 | Supply and fixing inmetal flush box four module 1.6 mm for mounting modular switches and sockets complete all as specified and directed. |
| 83 | Supply and fixing in metal flush box six module 1.6 mm for mounting modular switches and sockets complete all as specified and directed. |
| 84 | Supply and fixing in metal flush box eight module 1.6 mm for mounting modular switches and sockets complete all as specified and directed. |
| 85 | Supply and fixing in metal flush box twelve module 1.6 mm for mounting modular switches and sockets complete all as specified and directed. |
| 86 | Supply and fixing in metal flush box eighteen module 1.6 mm for mounting modular switches and sockets complete all as specified and directed. |
| 87 | Supply and fixing in 4 Module Gang box including Modular socket outlet 16 Ampsfor AC, 240 Volts flush type white finish including plug top 20 Amps with modular piano type switch 20 Amps and LED indicator (RED) incl concealed point wiring on wall and surface wiring on ceiling/roof with necessary arrangements with 4 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor with andincluding PVC concealed conduit of medium grade with all fittings and Modular white cover plate with frame 4 module to accommodate all theaccessories complete with internal connections, fixed with chromium plated screws and washers for switches and sockets, including 4 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dollyand including cutting chases in walls / floors for concealed conduitandmaking good disturbed surfaces by cement mortar (1:3) and to match with the existing surface/colour by using existing oil bound distemper/white wash complete all as specifiedand as directed. |
| 88 | Taking down old and u/s light fittings conventional type from wall surface / ceiling or any position and making good the disturbed surfaces all as specified and directed. |
| 89 | Supply and fixing in LED spot light, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose.Complete all as specified and directed. |
| 90 | Supply and fixing in LED light fitting mirror type with high out put diffuser,7 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size.Complete all as specified and directed. |
| 91 | Supply and fixing in LED wall lamp light 9 wattincluding LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.Complete all as specified and directed. |
| 92 | Supply and fixing in window light LED luminaire suitable for grid ceiling with 100% indirect lighting,delivering soft and uniform light for excellent visual comfort of 11 watt 220 V AC including connecting up with three core flexible copper conductor cable of suitable size.Complete all as specified and directed. |
| 93 | Supply and fixing in LED focus light 40 watt 220 V AC including connecting up with three core flexible copper conductor cable of suitable size.Complete all as specified and directed. |
| 94 | Supply and fixing in LED fountain light fitting 25 Watt 230 V AC outdoor type with multi colour changer system complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection.Complete all as specified and directed. |
| 95 | Supply and fixing in LED fancy light 9 watt wattincluding LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.Complete all as specified and directed. |
| 96 | Supply and fixing in LED strip light(5 mtr) including LED light driver holder connecting up with three core flexible copper conductor cable of suitable.Complete all as specified and directed. |
| 97 | Supply, installation and fixing of LED large size light in warm yellow colour LED light of capacity 150 watt as IP65 protection including hanging with hook at in three side complete all as speified and directed. (Note: 1. warranty of product will 1 year for repair/replacement of parts of lights etc.2.Contractor will responsible damage of product during transist of delivery of product.3.During installation of light contractor will its own arragements). |
| 98 | Supply and fixing in replacement GI Pipe bend to shape 1.5 mtr (32/40mm dia as required at site) with two Nos clamps made out of 50x6mm flat and two Nos bolts with nuts duly grouted in wall or fixing on wall, complete all as specified and directed. |
| 99 | Taking down carefully unserviceable DB any type/size disconnecting and making good disturbed surfaces,Complete all as specified and directed. |
| 100 | Supply and fixing in factory made epoxy powder coated distribution board SPN 12 way double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, stranded DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts, complete all as specified & directed. |
| 101 | Supply and fixing in factory made epoxy powder coated distribution board SPN 08 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, stranded DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified & directed. |
| 102 | Taking down carefully unserviceable MCB SP/SPN/Isolator of any rating/size. complete all as specified & directed. |
| 103 | Supply and fixing in MCB single pole 240 volt \"C\" curve 10 KA 5 to 32 Amps capacity all as specified and directed incl taking down old one, complete all as specified & directed. |
| 104 | Supply and fixing in MCB single pole & neutral 240 volt \"C\" curve 10 KA 25 to 32Amps, complete all as specified and directed. |
| 105 | Supply and fixing in MCB triple pole & neutral 240 volt \"C\" curve 10 KA 40 to 100Amps, complete all as specified and directed. |
| 106 | Taking down old and u/s sub main wiring of 2/3 runs of any sizes from any position including, making good disturbed surface of wall ceiling etc all as directed. |
| 107 | M&L for concealed sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 10.0 Sqmm of voltage rating up to and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 10.0 Sqmm (green colour) as earth continuity conductor all as specified and directed. (Note : Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit). |
| 108 | M&L for concealed sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 6.0 Sqmm of voltage rating up to and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 6.0 Sqmm (green colour) as earth continuity conductor all as specified and directed. (Note : Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit). |
| 109 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, buried directly in to ground (earth pit) not less than 2.25 metres deep below GL with top edge of earth plate opt less attn. 1.50 m below ground levelsurrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, connected to GI lead strip of 32x6 mm dia.(7.50 m Long) by means of nuts, bolts and washers, check nuts of GIand protected by the GI pipe light grade 15 mm nominal bore(7.5 m long) for earth lead wire and watering pipe light grade of 20 mm nominal bore, 0.63 mm thick G I sheet funnel , wire mesh, earthing test pointetc complete including necessary earth work and excavation in any type of soil , PCC 1:2:4 type B1 earth pit and Precast RCC cover 65 mm thick duly reinforced with 6 mm dia. MS round bars @ 100mm C/C both ways, with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as describedin electric plate of SI Part I completeall as specified and directed and testing on completion. Note :- Ifthe desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. |
| 110 | Supply, install,fixing and commissioning split type air conditioner of capacity 1.5 TR, five star rated, BEE 3.2 of capacity with cordless remote control unit and in built air ioniser, plasma filter for better indoor air quality, star rated suitable for wall mounted, single phase, 230/250 volt AC including breaking necessary hole in wall for fixing indoor and outdoor unit and making good to disturbed surfaces with cement mortar to match with existing finishes after commissioning, making necessary connections unplasticised PVC pipes medium duty 25 mm dia for draining out condensed water all as required including necessary connection complete all as specified and directed. |
| 111 | Supply and fixing in Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 150 V to 270 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA.Complete all as specified and directed. |
| 112 | Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. |
