|
| 1 | Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by thedepartmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification. |
| 2 | Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundationincluding dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification |
| 3 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc. using mild steel sheets of size 1200cm x 60cm and 10 BG stiffened with welded mild steel angles of size 40mm x 40mm x 5 mm for boarding, laid with silver oakjoists of size 10cm x 5cm& 7.5cm x 5cm as support runner, Top Horizontal stiffener spaced at about 60cm to 90cm centre to centreor at suitable intervals. MS Channel Section (ISMC 100) shall be provided as a vertical support @1.20m C/C and with Lateral support of Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m)& steel pipes of 20mm dia @ required level/spacing etc. complete complying with standard specifcation and as directed by the departmental officers. (Payment for centering shall be given after the concrete is laid) |
| 4 | Supplying and erecting steel centering including necessary supportsFor plane surfaces such asrectangular or square RCC columns etc. which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick).etc..complete in all floors complying with standard specifcation. Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid). |
| 5 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oakjoists of size 10cm x 5cm& 7.5cm x 5cm as support runner , vertical stiffener , side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid). |
| 6 | Supplying and erecting centering for plane surfaces such as RCC Floor Slab, Roof Slab, Loft, Landing Slabs, etc with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over steel adjustable span of size 2m x 2m (expandable upto 3.60m) and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers.(Payment for centering shall be given after the concrete is laid). |
| 7 | Supplying and erecting centering for plane surfaces such as RCC Floor/Roof Beam, Lintels, Cantilever Beams, Bed Blocks etc.. with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over Steel adjustable Span of Size 2m x 2m(expandable upto 3.60m) and Silver Oak Joists of Size 10 x 5 cm spaced at 50cm to 60cm c/c and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid). |
| 8 | Providing and laying in position, standardised concrete Mix M-20 Grade in accordance using 20mm with IS:456-2000, and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglms and maximum water cement ratio of 0.50, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 k9. of 20mm machine crushed stone jelly and with about (3\"3 cu\"m\") 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu\"m\") 7670 kg\" of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 9 | for foundation & basement |
| 10 | for Ground Floor |
| 11 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification.(Contractor has to make his own arrangements for the supply of steel and binding wire) |
| 12 | For Foundation and Basement |
| 13 | For Ground floor |
| 14 | Brick work in Cement Mortar 1:6, using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification. |
| 15 | Ground Floor |
| 16 | Plastering with Cement Mortar 1:3 (One Cement and Three Sand) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers. |
| 17 | Plastering with Cement Mortar 1:5 (One cement and Five P-sand), 12mm thick mixed with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 18 | Paving the Top of roof with Solar reflective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three crushed stone sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by the Executive Engineer before use on works) |
| 19 | Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat on cement plastered wall surface ect., completecomplying with standard specification and as directed by the departmental officers. |
| 20 | Painting two coats of newly plastered wall surface with ready mixed plastic interior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 21 | Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications |
| 22 | Supply and fixing of Fire fighting application oblique type Stainless Steel Hydrant Valve of size 63mm – dia with oblique type instantaneous coupling with rotating wheel to open and close the valve including MS flange of table “E”, bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, necessary scaffolding and re- doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers.(Make; OMEX/KARTER/LIFE GUARD/SAFE GUARD/EQUIVALENT. |
| 23 | Supply, Installation of Fire fighting application 180 degree swinging type, hose reel drum with 20 mm dia braided thermoplastic hose of 30 meters long so as to extent to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve & open & close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at everyfloornearertohydrantvalve,including conveyance,allincidentalcharges,necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc completeasperstandardspecificationandas directed by the departmental officers. |
| 24 | Supply,andfixinginpositionofFirefighting application Hose of 63mm dia of 15mts length binded by copper wire with 63mm dia Stainless Steelmale and female instantaneous fire fighting special coupling as per IS 901 as directed by the department officers Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re- doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directedby the departmental officers. |
| 25 | Supply, and fixing in position of Fire fighting application 63mm dia Stainless Steelshort length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever foundnecessary etc complete as per standard specificationandasdirectedbythedepartmental officers.(MAKE:OMEX/KARTAR/LIFEGUARD/SAFE GUARD/EQUIVALENT. |
| 26 | Supply and Fire fighting application M.S. Hose Box to keep two numbers of Hoses and one number of branch pipes with nozzle. having proper glass window type double door with universe open key, painted inside white and outside PO red. Near every hydrant point including conveyance, all incidental charges, necessary scaffolding and re- doing the dismantled portions to its original conditionwhereverfound necessaryetc complete as per standard specification and as directed by thedepartmentalofficers.(Make: OMEX/KARTAR/LIFE GUARD/ SAFE GUARD/ EQUIVALENT. |
| 27 | Supply, erection, testing and commissioning of MS ‘C’ Class Heavy duty pipe as per IS 1239,to withstand a developing pressure of 10kg/sq.cm including necessary fittings like MS flange of table ‘E ‘ Elbows, reducers, gaskets, both, nuts with washers & Joints as per standard method of arc welding .Including one coat metal primer and two P.O RED painting including conveyance ,all incidental charges ,necessary scaffolding and re-doing the dismantled portions to its originalconditionwhereverfoundnecessaryetc complete as per standard specification and as directed bythedepartmental officers. Make; JINDAL/EQUIVALENT. |
| 28 | 150 mm dia |
| 29 | 100 mm dia |
| 30 | 80 mm dia |
| 31 | 50 mm dia |
| 32 | Wrapping and coating anti-corrosive treatment for underground MS pipe having one coat of anti-corrosive metal primer ,one layer of Asphalt Tar tape wound over the M.SPipe as per standard methods as per standard specification as directed by the departmental officers |
| 33 | 150 mm dia |
| 34 | Supply ,erection, testing and commissioning of Cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’ gaskets , bolts& nuts including conveyance all incidentalcharges,necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers.Make:NORMEX/KARTAR |
| 35 | 150 mm dia |
| 36 | Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Non-return valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead, tank at terrace leve l near to jockey pump and motor including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312. including conveyance, all incidental charges, necessary scaffolding and re-doing dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. |
| 37 | 150 mm dia |
| 38 | Supply, erection, testing and commissioning of Gun metal Gate valve of size 50mm dia including necessary MS flange of table ‘E’ gaskets, blots & nuts, etc. installed at pump house delivery line for the purpose of priming water to suction line including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portionsto its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. ke:LEADER/EQUIVALENT. |
| 39 | priming tank mounted with the supporting arrangement fabricated using MS angle for the height of 3.00 mtrs from the floor level, inlet, outlet, and drain arrangements inside the fire fighting pump room as directed by the department officers |
| 40 | Supply and laying of following sizes of armoured Aluminium/Copper cables for electrical motor. control Panel, Pressure switch, jockey motor etc. all incidental charges necessary scaffolding and re- doing the dismantled portions to its original condition wherever found necessary etc. Make.POLYCAB/PARACON/FINLOEX/EQUIVALENT |
| 41 | 3 core 185 sq.mm. armoured aluminium cable |
| 42 | 3 core 10 sqmm armoured copper cable |
| 43 | 10 core 2.5 sq.mm. armoured copper cable |
| 44 | 2 core 2.5 sqmm armoured copper cable |
| 45 | Earthing arrangements with GI earth plate including charcoal and salt with necessary excavationin all soils and to full depth as may be required and masonry work. Refilling the sides of foundation with excavatedearth as per thestandard specification and as directed by the department officers. |
| 46 | Supply, erection, testing and commissioning of pressure Gauge with 0 to 141 kg range of reputed make with necessary value, milling thread Ms coupling fixed at delivery pipe line in pump house to read the developing pressure including conveyance. All incidental charges, necessary scaffolding and re- doing the dismantled portions to its original condition wherever found necessary etc. complete as per standard specification and as directed by the departmental officers.Make: H-GURU/ISIMARK/EQUIVALENT. |
| 47 | Supply, erection, testing and commissioning of suitable Pressure switch of reputed make line indfoss or Donfoss including necessary values, couplings etc. connected with electrical main control panel and setup at proper differential so as to auto start& auto stop the electrical motor. Jokey motor including conveyance. all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary metering protections & indications complete as per standard specification and as directed by the departmental officers. Make: DONFOSS/INFOSS/ISIMARK/EQUIVALENT. |
| 48 | Supplying, installation, testing and commissioning of fire fighting electrical control panel of cubical construction floormountedtypefabricatedusingCRCAsheet, compartmentalized with hinged lockable door dust, and internal wiring, earth terminals, num bearings , necessary meteringprotections&indicationscompleteinall respect. Suitable for operation on 451 volt. 3phase,50Hz AC supply with enclosure protection class IP 54 and mounted with the followings |
| 49 | A: Common panel in fire pump House |
| 50 | (i)incomer - a)1 no 600A TP&n sdfu with HRC fuses b)1 set of 600A, 4 bar Aluminium bus bar,415V,50HZ Ac supply c)1 No (0-500A) digital ammeter with selector switch & CT’s d)1 no (0-500V)digital voltmeter with selectorswitch &control fuses e)3 nos. phase indication lamp LED type with toggle switches with control fuses |
| 51 | (ii) Outgoing 1.400 A TPN SDFU with suitable HP fully automatic star/ Delta started over load protection , Digital ammeter with built in selector switch and suitable CTs, current sensing type single phasing preventer complete with all accessories aand internal wiring required for automatic operation. Selector switch for auto/ manual/OFF operation -1 No |
| 52 | (b) Jockey pump |
| 53 | 2.125 A TPN SDFU with HRC fuses with suitable Hp fully automatic star/Delta starter with over load protection current sensing type single phasing preventer complete withallaccessoriesandinternalwiringrequiredfor automatic operation, selector switch for auto/ manual operation -1 No |
| 54 | (c) Diesel Engine control comprising: |
| 55 | (a)Auto/manual selector switch & 3 attempt starting device. Timers and releys as required, push buttons start/stop in manual mode(b)indication lamp for high/ low lub oli pressure , High water Temp,and Engine On indication (c)Battery charger suitable for 12 V/24 V DC with boost and tickle selector switch, 0-15V/O-30V DC volt meter, 0- 20A DC Ammeter. (d) All standard relays and accessories for automatic operation of diesel engine. e)The above Combined panel mounted over M.S Channel Fabricated Frame with Cement concrete Pl atform, all other connection works carried out as per standard methods and including conveying, fixing and incidental charges etc complete as per standard specification and as directed. |
| 56 | Supply, erection, testing and commissioning of Fire Fighting Application Horizontal Centrifugal Type Pump rated for 2850 LPM at 70 metres head with Electrical Motor of 60HP of 415 volt, 3 phase connection complete with base plate and accessories. (Make Kirloskar or Equivalent).The rate inclusive of neessary vibration, bed mounting, etc., as per standard specifications and as directed by the Departmental Officers |
| 57 | Supply, erection, testing and commissioning of 180 LPM 70 metres Head Pressurization pump with 10 HP electrical motor of kirloskar make with suitable base frame, Including necessary vibration bad mounting etc., including conveying, fixing and incidental charges etc complete as per standard specification and as directed by the departmental officers. Make: KIRLOSKAR / EQUIVALENT. |
| 58 | Supply, erection, testing and commissioning of Fire fighting 4 way fire brigade inlet with necessary Gun metal 63 mm dia non return spring shutter arrangements so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry, including conveyance, all incidental charges, necessary scaffolding and re- doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. |
| 59 | Supply, erection , testing and commissioning of Air release valve of 20mm dia so as to release airlock in 100mm dia MS pipe at top most wet riser, including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. Make: KARTAR/ EQUIVALENT. |
| 60 | SupplyandfixingofstoredpressureABC(Mono Ammonium Phosphate) powder type Fire Extinguisher of 6 kgs capacity as per IS: 15683 with pressure gauge, discharge hose & control nozzle, wallmounting bracket, safety clip etc., including conveyance, all incidental charges,necessaryscaffoldingandre-doingthe dismantled portions to its original condition wherever foundnecessaryetccompleteasperstandard specification and as directed by the departmental officers. |
| 61 | Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc., complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT |
| 62 | Supplyandfixingofpre-fabricatedsteelstructural materials using MS angle, channel, plate and similar sections for supporting suction and delivery pipe and manifoldof firepumps. Thequotedrate shall includesnecessarybolt,nutetc.andonecoatof primerandsyntheticenamelpaintingofapproved shade and as directed by departmental officers. |
| 63 | 100mm Dia |
| 64 | 80mm Dia |
| 65 | 50mm Dia |
| 66 | Supplying, installing, testing and commissioning of 8 - Zone Conventional Fire Alarm Control panel with 48 hours battery back up for normal operation. The Panel Shall be provided with battery charger etc, and as directed by departmental officers. |
| 67 | Supplying, installing, testing and commissioning of conventional electronic Hooter with base and as directed by departmental officers. |
| 68 | Supplying, installing, testing and commissioning of Manualcallpoint (break glass type) withback box and as directed by departmental officers. |
| 69 | GST @ 18% |
