Tender For Addn/Altn To Certain Officers Md Accommodation At Dehradun.; 1 Taking down chowkat with shutter any description n. exc 1.5 Sqm each complete all as specified and as directed. 2 Taking down chowkat with shutter exc 1.5 Sqmbut n.exc 4 Sqm each complete all as specified and as directed. 3 Supply and Fix Pressed steel frame of size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete, including frrame filled in cement concrete 1:2:4 type BO (12.5 mm stone aggregate) complete all as specified and directed 4 Supply and Fix Pressed steel frame of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete, including frrame filled in cement concrete 1:2:4 type BO (12.5 mm stone aggregate) complete all as specified and directed 5 S&F factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed . 6 S&F 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fireetardant and having screw holding capacity complete all as specified. 7 S&F 35mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed. 8 S&F flush shutters 35 mm thick one face is covered with decorative face veneer teak wood finished with lipping/frame to match , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. 9 S&F of power coated ventilator fixed type and frame made with aluminium section with and including partly glass and partly stainless steel wire mesh and including aluminium grill of aperture not more than 40 sqcm (as specified below), aluminium sections shall be of size as given below including taking down old window/ventilator etc complete all as specified and directed by Engineer in Charge. Frame : 44.5 x 44.5 mm x 1.98 mm thick including 5mm thick frosted in glassfixed with rubber gasket with aluminium beading and stainless steel wire mesh of 0.63 mm nominal dia wire and average width of aperture 1.40 mm completeincluding taking down old window/ventilator etc complete all as specified and directed by Engineer in Charge. Note :- (i) Making good of wall surface withmatching to existing surface complete all as specified and directed by Engineer in Charge. (ii) Cost of glass and gauge shall be included in the quoted rate complete all as specified and directed. 10 Material and labour for aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter andone noswire gauged shutter sliding type, with aluminum sections as per Series-A(15mm) 3 track of Jindal section numbers for sliding windows,and glazed with tinted glass coloured glass 4mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long with stainless steel grill consisting of 12 mm square bar & 40 x 5 mm thick SS flat all around incl making good of existing surfaces with plaster and external (cement base paint)/ internal (OBD) finishes complete all as specified and directed. Shutter Top & bottom size : 37.50x15x1.60mmShutter inner lock size 37.50x15x1.60 mm Shutter side (Handle) size 37.50x15x1.36mmChowkhat bottom size : 50.30x26x1.20mmChowkhat top & sides size:50.30x26x1.00mm 11 M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. 12 S&F in repair 200 mm long 1st class, solid in one piece stainless steelbarrel tower bolts 204 grade complete all as specified and directed by Engr-in-charge. 13 S&F 150mm size solid in one piece stainless steel handles,cast D type 204 grade, fixed in stainless steel screwsall as directed complete all as specified and directed by Engr-in-Charge. 14 S&F 100 mm size stainless steel butt hinges and fixed with stainless steel screws, complete all as specified and directed by Engr-in-Charge. 15 S&F 300mm long stainless steel sliding door bolts 204 grade,hasp and staple typewith bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and ditected. 16 S&F stainlesssteel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed. 17 S&F in repairs of aluminium body door cill at bottom part of door to stop entry of insect inside the room complete all as specified and as directed. 18 S&F 18 mm thick WPC board one side prelaminated and other side plain white colour as in cup board shutters and frames, kitchen cabinet frontshutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive incl dismantling old existing boardcomplete all as specified and directed by the Engineer-in-Charge. 19 S&F 18 mm thick WPC board both side plain white colour as in cup board shutters and frames, kitchen cabinet frontshutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive incl dismantling old existing boardcomplete all as specified and directed by the Engineer-in-Charge. 20 S&F Continuous (Piano) hinges , mild steel, bright finished or stainless steel 304 grade, width of flaps (When open) 30 mm complete all as specified and ditected. 21 S&F hasp and staple 75mm safety type, stainless steel type 202 grade with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. 22 S&F auto closing hinges 35mm of 0 crank (KH-001) OR 8 crank (KH-002) open able at 110 degree for kitchen cabinet shutters stainless steel completeall as specified and directed. 23 S&F Ball bearing runner 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs,completeall as specified and directed. 24 S&F stainless steel handle fency type 100 mm size for kitchen cabinet shutters complete all as specified and directed. 25 S&F magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed. 26 S&F chrome plates stainless steel wire basket (storage basket) pull out type for large utensils, size 480x500x150mm of Grade 304 with necessary fixing clips etc complete all as specified and directed. 27 S&F chrome plates stainless steel wire basket (cup and saucer basket) pull out type for large utensils, size 380x500x100mm of Grade 304 with necessary fixing clips etc complete all as specified and directed. 28 S&F chrome plates stainless steel wire basket (plate basket) pull out type for large utensils, size 380x500x100mm of Grade 304 with necessary fixing clips etc complete all as specified and directed. 29 S&F chrome plates stainless steel wire basket (cutlery basket) pull out type for large utensils, size 380x500x100mm of Grade 304 with necessary fixing clips etc complete all as specified and directed. 30 S&F chrome plates stainless steel wire basket (Grain Trolley) pull out type for large utensils, size 480x500x100mm of Grade 304 with necessary fixing clips etc complete all as specified and directed. 31 S&F in repair peg set of five stainless steel fixed on CP steel plate 304 grade including fixing screw as per approved sample complete all as specified. 32 S&F in repairs CP brass Soap dish 6 inches complete all as specified and directed. 33 S&F in repairs glass corner shelf suitable size made of 5mm thick toughned glass all as specified. 34 S&F in repair Glass shelf assembly consisting of 5.5mm thick toughned glass with chromium plated guard and railing size 500x125mm with brass bracket complete all as specified. 35 S&F in repair 20 mm dia brass chromium plated towel rack of 3 sets type 60cm long between flanges including pair of fixing brackets completeall as specified and directed. 36 S&F in repairsbrass chromium plated towel ring complete all as specified. 37 S&F in repairs chromium plated Toilet paper holder complete. 38 S&F in repair CP Health Faucet with 1.20 mtr metalic expandable tube & hook complete all as specified and directed. 39 S&F in repairs fancy type size 450 x 600 x 5.00 mm thick or higher size looking mirror fixed to wall with mirror stainless steel nuts,complete all as specified and directed. 40 S&F in repair 32mm dia PVC waste pipe for WHB and sink 90cm long with union,complete all as specified and directed. 41 S&F in repair CP Brass 3 in 1 hot & cold 15 mm dia wall mixer for mixing hot & cold water with telephonic shower provn with connecting legS&Flanges complete all as specified and directed.. 42 S&F in repair 15mm dia CP brass chromium plated Central hole basin/sink mixer with accessories in wash basin for fixing hot and cold water, dcrewed down for 15mm bore GI pipe complete all as specified and directed. 43 S&F in repair pillar taps, brass, with capstan head, fancy type chromium , screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. 44 S&F in repair 15mm bore Bib taps long body, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 45 S&F in repair 15 mm bore Angle cock/stop valves cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. 46 S&F in repair brass chromium platedovehead shower with shower arm complete all as specified and directed. 47 S&F in repairs vitreous china wash down water closet Padestal pattern white (excluding flushing cistern and fluch pipe) with CI P or S; trap including plastic white seet cover, CP Jet spray with 1.0 mtr long PVC pipe, connecting to stack pipe and to flushing pipe and complete including making good to floor complete all specifiedand directed. 48 S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white withfront or back inlet with integral foot rests including provn of lime concrete bedding including connections to flushing cistern/pipe complete all as specified and directed including 100mm dia CI P trap of 60cm long. 49 S&F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete. 50 S&F in repair vitreous china wash hand basin incl padestal , white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed 51 S&F PVC connection 15mm size with PTMT nuts, of 450 mm length. 52 S&F in repair CP steel grating 100 mm to 125mm dia round fix on floor/nahani trap with hole/without fixed with cement morter, complete all as specified. 53 S&F in repair double bowl stainless steel kitchen sink made of stainless steel 1mm thick 304 Grade, coupling plug, washers and waste pipes including bedding in cement morter on to draft wall or including fixing cantilever brackets and connecting union to pipe, overall size 1000mm x 545mm x 230 mm, bowl sice 460mm x 460mm x 230mm all as specified and directed.Make: Nirali modle Omate or equivalent in Prayag polymer pvt ltd and Blue star- silver shine. 54 S&Fin repairs plate rack 200mm and size 90cmx105cm made out off 1.00 mm thick stainless steel complete all as specifiedand as directed. 55 S&F in repair 20 mm dia stainless steel polished 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative nobs at both ends completeall as speccified and directed as per approved sample complete all as specified and ditected. (Make-Vista or equivalent) 56 Taking upor down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified and directed. 57 Taking upor down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified and directed. 58 S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing complete all as specified and directed. 59 S&F 20mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed . 60 M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc half but n exc full brick wall complete all as specified & directed. 61 S&F rotational moulded polyethylene water storage tanks Capacity of tank 1000 litres tripple layer, white colour,(cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete all as specified and directed. 62 S&F ball valve high pressureof PTMT with epoxy coated alum rod & high density plastic ball screwed for 20mm bore iron pipe and fixed ( minimum weight 20mm -210 gms) complete all as specified and directed. 63 M&L 25mm thick PCC 1:2:4 type B-0 using 12.50mm graded stone aggregate as in levelling course to floors complete all as specified 64 M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to matchwith tileincluding dismantling of existingtiling complete all as specified 65 Description same as per item No 64 above but as in skirting/dado including 10 mm thick rendering in cement mortar 1:4, complete all as specified.. 66 M&L non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6- 7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and dismantling of existingtiling including cement mortar bedding (but not backing) andrubbish off the premises complete. 67 M&L for coloured Glazed ceramic tiles in vertical surfaces of size 350mm x 250mm x 7mm/ 450x 350 x 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed. 68 Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for complete all as specified and as directed. 69 M&L for Cement concrete type D2 1:4:8 (using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed. 70 M&L for 40mm thick cement concrete 1:2:4 type B0 using 12.50 mm graded stone agg in floor,bedding layer over roof slab laid in alternate bays, etc and finished the top surface of concete by brooming complete all as specified and directed. 71 M&L for coloured pre-polished rubber moulded chequred cement concrete tile 300mm x 300mm x 20-22mm thick with anti skid properties set, jointed and pointed in neat cement slurry as in floor with grey cement and pigmentlaid over and including 15 mm thick screed bed in CM 1:6 completeall as specified and as directed. 72 M&L 75mm thick PCC 1:3:6 type C-2 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement and demolition of existing old cement concrete of plinth protection inground floor and paving below or above ground level complete all as specified. 73 M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in kitchen slab, slabs supported on walls, beams and colums, in floors, roofs, landing balconies, canopies, deck slabs, chajja and in shelves and the like, including demolition of exiting reinforced cement concrete complete all as specified and directed. 74 M&L for form work to RCC Slab any descriptin such as kitchen slab,roof, chajja,floor etc.complete all as specified and directed 75 S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified. 76 S&F granite 16-18mm thick of any type ( table rubbed and polished in cooking platform, steps, jambs pillars, window cill,and like in cement mortar 1:4 incl pointing in white cement including demolition of existing stone complete all as specified and ditected. 77 M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in shed haunching,cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed. 78 Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and as directed by Engr-in-Charge. 79 Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM ( 1:6 ) complete all as specified and as directed . 80 Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick, built in CM ( 1:4 ) complete all as specified and as directed . 81 Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed. 82 M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth complete all as specified and as directed . 83 M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth complete all as specified and as directed . 84 M&L for rendering 10mm thick with CM (1:3) on or concrete surfaces finished even and smoothas in ceiling complete all as specified and as directed. 85 M&L for complete removal of old existing treatment of internal or external surfaces of wall complete all as specified and directed. 86 M&L applying interior grade wall care putty 1mm thick to make the surface smooth as specified and directed. 87 M&L two coat oil bound distemper by roller any tint over a coat of primeron old surfaces of walls complete all as specified in SSR Part I including complete all as directed . 88 M&L for complete removal of old existing treatment on ceiling complete all as specified and directed . 89 M&L for preparing of old plastered and unplastered surfaces of ceiling and applying two coat of distemper oil emulsion complete all asspecified & directed. 90 M&L for preparation of wall and applying exterior grade acrylic water proof wall care putty 1mm thick to make the surface smooth as specified and directed. 91 M&L for preparation of old/new decorated surfaces and applying two coats of weather proof any colour external finish on wall/chajja, roof, facia (projected portion) all as directed . 92 M&L for preparation of new/previouslyuntreated surfaces of wood over 10 cm width/girth and applying two coat of synthetic enamel paint all as specified in SSR Part I and directed . 93 Taking down AC/Salt glazed warepipes and fittings upto 110mm complete all as specified. 94 S&F PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls/flooretc complete all as specified and directed. 95 S&F PVC (SWR) pipes of 75 mm dia, single socketed fixed to walls/floor etc complete all as specified and directed. 96 S&F PVC (SWR) pipes of 110 mm dia, bend with oval acess door, T socket reducer etc complete all as specified and directed. 97 S&F PVC (SWR) pipes of 75 mm dia, bend with oval acess door, T socket reducer etc , complete all as specified and directed. 98 S&F in repair Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, incl nut and bolts and securing ends of stay to wall or roof for 100 mm bore CI pipe.grouted in PCC 1:2:4 complete 99 S&F in repair Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, incl nut and bolts and securing ends of stay to wall or roof for 75 mm bore CI pipe.grouted in PCC 1:2:4 complete 100 PVC(SWR) floor trap, plain with grating including jointed with solvent cement of 75 mm outlet dia complete all as specified and directed. 101 Dismantling asbestos cement (corugated or semicorrugated etc) sheets, in roof covering/shed including ridge. 102 S&F Pre-painted galvantume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to walls/chajja covering,ridge etc fixed with self tapping screws as specified 103 S&F Pre-painted galvantume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to walls/chajja covering,ridge etc fixed with self tapping screws as specified 104 Dismantling of unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed. 105 S&F for Steel work in tubular trusses/purlin including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to S. 1161-1979 grade St-240 complete all as specified and directed 106 M&L applying two coats of synthetic enamel paint onnew or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete. 107 M&L for complete removal/ demolition of existing treatment of sunken portion such as WC & bath similarly use the following specification for sunken floor:(a) Clean the complete surfaces including rubbish for sunken and washing down with water.(b) Plaster for sunken portion in CM (1:3) with WPC (Dr. Fixit or equivalent) as per manufacturers instructions.(c) Preparation of surfaces and applying one coat of polymeric primer @ 0.30 Kg/Sqm.(d) Supply & providing APP based polymeric water proofing memberane 3 mm thick of weight not less than 3.00 Kg/ Sqm.(e) Applying one coat of bitumen 85/25 @ 1.2 Kg/Sqm.(f) M & L for PCC 1:5:10 complete mixed with brick bats 40 mm size.(g) M & L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) 40 mm thick finish even and smooth as specified. 108 M&L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified 109 M&L for Machine cut kota stone as in skirting 16-18 thicklaid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:6 complete all as specified 110 Material and labour for point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in non rigid PVC concealed conduit not less than 25mm diawith all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including Modular metal flush boxes 1.6 mm thick, upto 60 mm deep of required size factory made for mounting modular switch, regulators etc with inner /outer cover and frame(white) ISI marked, fixed with brass screwsincluding taking down unsv point wiringof any sizefor the following type . Note: (i)The quoted rates shall be deemed to be inclusive formaking good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. (ii) Point wiring & earth wire shall be connected to each & every sunken box. 111 One light point controlled by one, one way switch 5 Amps 112 One fan point point controlled by one, one way switch 5 Amps . 113 One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board. 114 One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. 115 One bell point controlled by one, bell switch 5 Amps 116 All as per item No 110 above but with stranded copper conductor 4 Sq mm (nominal area), two single core, PVC insulated cable 1100 Volt grade ISI markedfor 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 4 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly. 117 S & Freplacement fan regulator modular step type 120W 240 volts 2 module type complete. 118 S & Fin replacementModular switch single pole one way 6 Amp .. 119 S & Finreplacement Modular switch single pole one way 16 Amp. 120 S & F in replacement Modular socket outlet 2/3 pin combined 6 Amp 240 volts . 121 S & FinreplacementModular socket outlet 2/3 pin combined 16 Amp 240 volts . 122 S & Finreplacement Modular bell push flush type, 5 Amps . 123 S & F in replacement Electric ding dong bell 230 volts AC . 124 S & Finreplacement ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body. 125 Taking down the existing Energy meters carefully and proper noted down the qtr NoMeter No and reading with dateand kept in safe custody for re-fixing at site after compltion of bldg workcomplete. 126 S & F sub main wiringwithPVC insulated unsheathed FRLSH cable 1100 Volt grade,with multi stranded copper conductor drawing in and including rigid PVC conduit in concealed / surface as required at site including one runPVC insulated unsheathedcable with multi stranded copper conductor colour code as a earth continuity and connected upto DBincluding taking down old unsv submain wiring of following sizes .Note:(i)Tworun of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for fixing the conduits to surface withusing PVC rawl plugs etc.(iii) Phasecolour code must be follow i.ePhase( Red) and Neutral ( Black) In colour and for three Phase RYB For phase and black for neutral. 127 2 x 6 Sqmm+ 1 x 6 sqmm 128 2 x 4Sqmm + 1 x 4 sqmm 129 S & F inreplacement Distribution boards epoxy powder coated TP & N (VTPN MCCB DB) fabricated from minimum 1.6 mm thick CRCA sheet and fixed/ flush to wall with suitable capacityfully insulated copper Bus Bar for each phaseand 02 neutralshroudedbar ,2 earth bar and cable tie for cable managementwith reversible door for IP-43 protection,415 voltand suitable for fixing FP MCCB 100/125 Amps as incomer andcombination of SP/TP MCBs asoutgoings offollowing capacity including taking down old unsv MCCB DB,s.Note: Suitable MCCB and outgoing MCBs will be measuredand paidseparately under relavant items of this schedule. 130 4 Way VTPN DB 131 S & F in replacement MCCB ,4 poleICS=100% ICU at 415 voltswith thermal-magnetic release and adjustable overload settingoffollowing capacity . 132 100 Ampswith rupturing capacity 16 KA 133 S & F inreplacementMCB SP 240 volts B Curve 10 KA . including connection with suitable size copper lugs of following capacity 134 MCB SP 6 to32 Amp.240 volts 135 MCB SPN 40to 63 Amps 240 volts 136 S & F in replacementDistribution box MCB Protected socket with Plastic enclosure (Surface mounitng ) 20 AMP MCB Combo box DP including plug top complete all as specified and directed 137 S & F in replacementMCB DB, sheet metal enclosures double door.The DBs should be supplied with tin platted insulated copper bus bar rated for 100A. 240 volts with IK09 type with blanking plates where required and IP 43 degree protection of following size:- 138 8 way SPNDB. 139 S & Fin replacementBatten holder, PVC/polycarbonate type with back plate suitable for batten fittings . 140 Supply and fix in replacement Exhaust fan 300 mm sweep, 900 RPM, ,made up of Sturdy Engineering Plastic complete ,voltage 230Volts ,50 Hz,complete with louvers, shutters and connecting up ceiling rose to connectorblock of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed. Note : Old fan should be deposited to MES store (Test certificate of fan to be submitted) 141 Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m, 900 RPMcomplete with louvers, shutters and connecting up ceiling rose to connectorblock of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed. Note : Old fan should be deposited to MES store (Test certificate of fan to be submitted) 142 S&F BLDC Ceiling Fan complete with electronic type regulator and remote accessories 230 V,1200 mm sweep. BEE 5 star rated PVC AC single Phase 230 V / 240V 50 Hz of , complete connecting up ceiling rose to connector block of fan including fabricating and fixing ofFan hooks from ceiling truss/angle iron, required length of down rods (Aas per site requirement) and necessarynuts and bolts complete all as specified and directed. 143 Supply and Fixingin replacementhigh prssure die cast alluminium LED Batten light fitting 20W ,125 lumens /watt,IP-20,colour temp not less than 6500,inbuilt electronic driver, PF not less than 0.90 , inbuilt surge protection minimum 2.5KV 144 Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete 145 Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. 146 Supply and fixing Electric Chimney of size 90 cm, Cap 1500 M3/ hr with autoclean property and all necessary minor items which is required to installation ,12 years warranty on motor. 147 Supply and fix electric water heater (INSTANTANEOUS ELECTRIC HEATING), storage type steel body with EPAC coated steel inner tank having minimum 8 kg /cm2 pressure bearing capacigty and heating element capacity 3 ltrs, BEE 5 star rated complete with all accessories such as safety valve , thermostate, NRV connection piece etc complete all as specified and directed 148 S&F decorative wall mounting made out of polycarbonated suitable for and incl retrofit 9 watt LED bulb complete all as specifed 149 Supply and fixing LED building securitylight fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. 150 Material and labour for Earthing complete with galvanized ironearth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board andtesting on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc.GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI light grade earth lead protection pipe etc complete all as specified and directed.Note: (i) Earth lead wire and its protection pipe upto and including 7.5 mtrfrom the top of earth electrode are included under this item. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted. 151 Supply and Laying XLPE insulated galvanised steel strip or wire armoured elctric power cable with stranded aluminium conductor 1100 V gradeof size 50 sqmm 3.5 core after cutting to required length with necessary glands, nuts, bolts, and lugs complete all as specified and directed 152 Excavation in trenches soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out excavated soil/sand/unseviceable LT Cable for laying of cable and getting out. 153 Sand cushioning and covering of UG cable using crushed metal sand in trenches for cable protection all as specified and directed. 154 Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in hard /loose soil complete all as specified and directed. 155 Removing excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified. 156 M&L for brick well burnt Class ‘B’ as cover to U/G cable laid dry flat over the cable with width equal to length of the cable and abutting each other with gap between adjacent slab not exceeding 10mm over under ground cable for cable protection in trenches all as specified and directed. 157 M&L for GI tubing medium grade (ISI marked) with all fitting/acessories for protection of cable on pole/wall and under road crossing including clamps, nut bolt etc all as specified and directed ofsize 40mm dia.
