}

Tender For Providing Windrow Plate Form At Resource Recovery Parkin Walajabadtown Panchayat., walajabad-Tamil Nadu

Town Panchayats has published Tender For Providing Windrow Plate Form At Resource Recovery Parkin Walajabadtown Panchayat.. Submission Date for this Tender is 25-09-2025. Shed Construction Tenders in walajabad Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

51291502
Tender For Providing Windrow Plate Form At Resource Recovery Parkin Walajabadtown Panchayat.
Tender
Indian
Tamil Nadu
Walajabad
25-09-2025

Tender Details

Tender For Providing Windrow plate Form At Resource Recovery Parkin Walajabadtown Panchayat.; 1 Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. complying with std. specifications.SS 20 BTNDSS No 23& 24VI(S2) VII 9,10 2 Supplying and filling in foundation andbasement with Stone Dust in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification. 3 Plain Cement Concrete 1:4:8 Mix (one part of cement, four part of M sand and Eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc. complete. Complying with std. specifications.TNDSS NO28 V, VI(S2) V, VI(S5A) VII 4 Supplying and erecting centering for sides and soffits including supports and strutting up to 3.29mm height for plane surfaces in all floors with cross bracings using mild steel sheets of size 30cm x 55cm and 10 gauge stiffened welded with mild steel sheets of size 25mm x 25mm x 3mm for boarding and laid over silver oak (country wood). Joists of size 10cm x 6.5 cm dia spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre etc complete complying with standard specification TNDSSNo. 30 &86 5 a). For PCC Work 6 b). For Column 7 Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - 8 Supplying fabricating and placing in position of TMTsteel rods including cost of binding wire, cost of labour charges for fabrication and placing in positionetc. Complete. Complying with std. specifications. TNDSSNo,97 V,VI (S6) VII (S6)VII-3 9 Plain Cement Concrete 1:2:4 Mix (one part OF cement, Two part of M sand and Four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. TNDSS No.24 10 Supply and fixing of ISA equal anglefor truss including cost of Material conveyance of all material, fabrication and fixing charges etc.Completeas per ISI with rust preventive primer & ready to assemble condition for easy installation at site including dismantlingmaking necessary with power drill to the accessories such as supplying and fixing holdfasts, plastic bush inserts receiver runner bottom shock absorbers etc. Complete as per standard specification. 11 Painting Two coats for new iron work over existing priming coat using departmental approved colour & quality of ready mixed synthetic enamel paint, including cost of all materials, all labore charges, etc., complete. 12 Supplying and fixing of Galvalume sheet roofing using 0.47 mm thick including all cost of materials at the site and necessary bolt and nots including all labour charges etc. complete as per standard specification. 13 Special ceiling Plastering in Cement Mortor 1:3 Mix (one part of Cement, Three part of M sand ) 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications

Key Value

Document Fees
Refer document
Tender Value
INR 11.50 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail