}

Tender For Face-Lifting Of Ps Shiva Doda By Way Of Ceiling, Doors And Windows Of 03 Acr And Kitchen Shed., doda-Jammu And Kashmir

Public Works Department has published Tender For Face-Lifting Of Ps Shiva Doda By Way Of Ceiling, Doors And Windows Of 03 Acr And Kitchen Shed.. Submission Date for this Tender is 30-09-2025. Shed Construction Tenders in doda Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

51279797
Tender For Face-Lifting Of Ps Shiva Doda By Way Of Ceiling, Doors And Windows Of 03 Acr And Kitchen Shed.
Tender
Indian
Jammu And Kashmir
Doda
30-09-2025

Tender Details

Tender For Face-lifting Of Ps Shiva Doda By Way Of Ceiling, Doors And Windows Of 03 Acr And Kitchen Shed.- 1 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) 2 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 1 meter from cutting edge All kinds of soil 3 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 4 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) 5 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 6 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 7 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 8 Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns 9 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. 10 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) 11 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) 12 Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking outjoints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand) 13 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) 14 Renewing glass panes, with putty and nails wherever necessary including raking out old putty : Float glass panes of thickness 4.0 mm(weight not less than10kg/sqm) 15 Providing and applying2 mm thick white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete. 16 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) overand including priming coat with water thinnable cement primer 17 Structural steel work Welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete. 18 Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter withbitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats ofapproved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, raftersand trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/m2 19 Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 20 Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :Kiln seasoned and chemically treated hollock wood 21 Providing and fixing 4.50 mm thick hard board sheet ceiling of approved quality with necessary nails etc. complete (frame work to be paid for separately) Standard Quality board 22 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, allnecessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6mm for diagonal braces 23 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 24 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 25 3 Module (100mm x 75mm) 26 6 Module (200mm x 75mm) 27 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 28 5/6 A switch 29 3 pin 5/6 A socket outlet 30 15/16 A switch 31 6 pin 15/16 A socket outlet 32 Supplying and drawing following size of FRLS PVC insulted copper conductor single core cable in the existing surface as required. 33 Engaged Labour/Coolie 34 CARRIAGE OF MATERIALS By Mechanical Transport including loading, unloading and stacking complete. 35 Carriage of Sand / Dust avg. lead of 30km by MT. 36 Carriage of stone aggregate (Below 40 mm)avg. lead of 20 km by MT. 37 Carriage of stone aggregate (Above 40 mm)avg. lead of 20 km by MT.

Key Value

Document Fees
INR 600 /-
Tender Value
INR 3 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail