Installation Of Children Play Equipment At A-12 Pally Shib Mandir Play Gound In The Ps-222, In Ward No -17, Under Kalyani Municipality. Scheme Id-Apas/01/092/222/0001- 1 MULTI PLAY STATION:Supplying, fitting and fixing of INO FRP Made Tube slide, FRP 6 mm- thickness INO FRP Made Wave slide, FRP 5 mm thicknessTotal Cover Area-15’x 13’ Iron part-2’.6” X 2’.6” inch Sq Bar, 3 X 1 Sq Hollo Tube, 1’ X 1’ Sq Hollo Tube 2’.6” thicknessMulti play with one Slide,one tunnel slide, one no shed, Platform height-4.5’, Structural parts made of MS hollow section (including cutting, fitting, welding, bolting and smoothing grinding etc. complete). Entire product is assembled with nut bolts. Outer diameter of metal parts: 26, 33 ,48,60,76,50x25mm, thickness of metal parts: max 3mm, FRP thickness: 6mm to 8mm, FRP density: 1600kg/m^3.Color:multicolor ASPA finish paint on 2 coats of primer. 2 PARK BENCH WITH CASTING HANDLE:Supplying, fitting and fixing of SIZE: Length –5’,Handle –C.I. casting ,Seat: wood or Hollow section or frp. Entire product is assembled with nut bolts. SEAT parts:75X25mm,50x25mm,.Color:multicolor ASPA finish paint on 2 coats of primer. 3 Seesaw Supplying, fitting and fixing of 4 Seat see-saw, 4 No. FRP Made seat, FRP 6 mm thicknessIron part-2’.6” X 2’.6” inch Sq Bar, Thickness 2’.6” mmCover Area-9’ X 5’, FRP thickness: 6mm to 8mm, FRP density: 1600kg/m^3.Color:multicolor ASPA finish paint on 2 coats of primer. 4 FRP Giraffe SlideSupplying, fitting and fixing of FRP Giraffe Slide: Hight of Giraffe 8 Fit, Platform height 5’ slide lengh 10’ Structural parts made of GI pipe and MS hollow section (including cutting,fitting,welding,bolting and smoothing grinding etc. Completer) Entire product in assembled with nut bolts. Outer diameter of metal parts:60mm,48mm,42mm thickness of metal parts min2.9mm, ERP thickness: 4mm to 5mm, ERP DENSITY: 1600KG/M3. Color multicolor ASPA finish paint on 2 coats of primer. 5 Circular Swing Supplying, fitting and fixing of 4 seat circular swing, FRP Portion Thickness 5 mmIron part-2 inch Round pipe, 1 inch Round pipe, 2no Bearing, Iron thickness 2’.6” mm Cover Area-8’ X 8’,FRP thickness: 6mm to 8mm, FRP density: 1600kg/m^3.Color:multicolor ASPA finish paint on 2 coats of primer. 6 ATOM SWING WITH 6 SEAT Supplying, fitting and fixing of hexagonal shape Height:8.5ft.,length-6’each side,The chain link 8mmand take the load of 80 kg(each). . Structural parts made M.S Hollow pipes (including cutting, fitting, welding, Bolting and smooth grinding etc. Outer Diameter of Metal Parts-60mm, Thickness of Metal Parts- min. 2.2mm-3.0 mm, FRP thickness: 6 mm to 8 mm, colour: multicolour ASPA finish paint on 2 coats of primer. 7 Supplying and Laying in the specified pattern of Interlocking Concrete Block Pavements (ICBP) with concrete blocks (with concrete grade as specified as per Table1 of IS 15658:2006) manufactured in steel mould clamped to a vibrating table by hydraulic pressure (as per cl. No. 6.30 of IRC :SP : 63 (2018), from BIS licensee manufacturer, with spacer nib (Small protruding profiles on the vertical face of a paver block used as a device for keeping minimum joint gap in between the paving blocks, as per CI. No. 3.26 of IS : 15658) and of specification size and shape with aspect ratio (The ratio of length to thickness of a paver block, as per C.I No. 3.3 of IS : 15658) as per table 2 of IS : 15658 with flexural strength breaking load s per annexure G of IS: 15658, on the prepared base course of specified CBR as per Table 1 of IRC SP 63 (2018) or else as mentioned in design and drawing with a cushion of compacted bedding sand of 25-35 mm thick (grading of the bedding sand as per clause 6.5.1 of IRC SP-63) and filling up the gaps in between paver blocks with joint filling sand (the grading of the joint filling sand will be as per clause 6.5.2 of IRC SP- 63) and completing the edges with cut blocks as per CI. No. 8.7 of IRC SP- 63 (2018) with proper confinement of bedding and joint filling sand, compaction, levelling and filling up of the edge gap.50 mm thickii) Colour Decorative12th CORRIGENDA & ADDENDA, Dated: 14.10.2020, Page 4 of 9, PWD(WB), S.O.R. Volume - I : Building Works w.e.f. 01/11/2017, Item No.-8, Page No. - 2861 x 21.00 x 6.5 =136.5 Sqm. 8 Providing and fixing at or near ground level precast cement concrete in kerbs (size: 450 mm x 350 mm x width 150 mm at bottom with bevelled nosing at top) of cement concreat M20 Grade without reinforcement, fixing as per approved pattern and setting in position at site after preparing the bed grade and slopes by laying Cement concrete with jhama khoa (1:4:8) as per specification and direction of Engineer-in-Charge including filling of joints with 10 mm thick cement morter (3:1) and back filling the vertical piece properly with earth duly compacted and curing the morter joints for atleast 3 days including cost and carriage of all materials complete.Ref.Page -228, Item -8 ,PWD SOR Vol-I w. e. f. 1.11.2017 9 Add 1 % Cess (on Sl No-1 to Sl No….. )
