|
| 1 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. Including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soil. |
| 2 | Carriage of materials inclusice of loading and unloading and stacking of materials if required with lead of 5 km building rubbish earth etc. |
| 3 | Providing and laying in position cement concrete including curing compaction etc . Complete in specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate M 10 grade Nominal Mix (with graded stone aggregate 20mm nominal size.) |
| 4 | Filling availableexcavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20cm. In depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. |
| 5 | Providing and injection Chloropyrifos Emulsifiable concentrate 20%with 1% concentration for PRE- CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from timetotime and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junctionof wall andfloor along the external perimeter of building expansion joints, over the topsurface of consolidated earth of which aprochisto be laid surrounding of pipes and conduits etc.complete as per specification (Plinth floor area only shall be measured for Payment) |
| 6 | Providingandlayinginposition specified grade of reinforcement cement concrete all RCC structural elements uptoplinth level including curing compactionfinishingwith rendering in cement sand mortar 1:3 ( 1 cement : 3 coarse sand) and making goodthe joints excludingthe cost of centering shuttering and reinforcement M25Grade nominal mix(withgradedstone aggregate 20mm nominal size) |
| 7 | Providing and layingin position specified grade of cement concrete for RCC Structure elements upto floor three level including curing, compaction, finishing with redering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excludingthe cost of centering shuttering and reinforcement for.Walls (any thickness) including attached pillasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.M25 grade Design Mix ( with weight batching plant only) |
| 8 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with wooden members and removal of formwork for upto floor three level for:Columns, pillars, posts and struts etc. |
| 9 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with wooden members and removal of formwork for upto floor three level for:Suspended floors, roofs landings staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam etc. |
| 10 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level.Thermo-mechanically Treated bars (Conforming of relevent IS code) |
| 11 | Random rubble dry stone kharanja under floor. |
| 12 | Brick masonry in foundation and plinth with bricks of class designation 75 in: Cement morter 1:6 (1 cement : 6 coarse sand) |
| 13 | Half brick masonry in Super structure up to third storey using bricks of designation 75 (Cement morter 1:4 (1 cement : 4 coarse sand) |
| 14 | Providing and fixing T -iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws of rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 15 | Provinding and fixing steel glazed doors windows and ventilator shutterd of standard rolled steel section joints mitred and welded eiht steel lugs 13x3mm, 10cm, long embedded in cement concrete block 15x10x10cm of 1:3:6 (1 cement :3 coarse sand: 6 graded stone aggregate 20 mm mominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mmthick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approved steel primer, excluding the cost of metal beading and othe fitting except necessary hinges of pivots steel handles peg stay etc. as per required: Partly fixed and partly openable (fixed area not to exceed 33%) |
| 16 | Providing and fixing Square bars or other flat welded to window, ventilatiors etc. |
| 17 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. |
| 18 | Spreading of hot blown bitumen (IS grade 25/85, 25/90 industrial grade) applied at 175 to 180 degree C @ rate of 1.70 kg per Sqm complete. |
| 19 | Provinding brick kharanja in lime sand mortar 1:2 in square pattern over roof of ground floor: 75 mm to 100mm thick average + Add for if cemnet mortar 1:4 is used instead of lime sand mortar 1:2. |
| 20 | Providing batta (Gola) 75mmX75mm in cement concrate (1:2:4) including finishing with cement morter 1:3 as per standerddesign. |
| 21 | Providing and laying 20 to 25 mm size glazed tiles pieces for roof treatment having colour and shade as approved by the Engineer incharge over 25mm thick layer of cement mortar mix 1:4 with application of cement slurry including finishing of joints with ordinary cement and curing etc. complete in all respect washing with acid. |
| 22 | Plaster on new surface on wall in cement sand mortar 1:4 including raking of joints etc. complete fine finish:25 mm thick PWD BSR 2019 UDR B-12/118 (12.8.1) |
| 23 | Plaster on new surface on wall in cement sand mortar 1:4 including raking of joints etc. complete fine finish:20 mm thick PWD BSR 2019 UDR B-12/118 (12.8.2) |
| 24 | 6 mm cement plaster to ceiling of mix 1:3 (1 Cement :3 fine sand) (PWD BSR 2019 Page No.B-120 Item No. 12.22) |
| 25 | Making grooves as per design in plaster 10mm to 20mm wide. |
| 26 | Applying birla Jk white cement based putty over cement plaster surface for making even surface (PWD BSR 2019 Page No. B-118 Item No. 12.5) |
| 27 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work including prepration of base with primer putty lippy complete in all respect. (PWD BSR 2019 P No B-128 I No 12.67.1 ) |
| 28 | Making drip course (Tapak) in cement sand mortar 1:6 with upto 40mm and 10 mm thick as per approved design |
| 29 | Polished Blue Kota Stone flooring skirting, laid over 20mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete: 25mm thick slab. (PWD BSR 2019 Page No. B-11/125 Item No. 11.35.2) |
| 30 | Grinding and polishing on mosaic/polished stone flooring New Surface |
| 31 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of : South Black granite Above 3601 Cm2 Slabs |
| 32 | Extra for providing edge moulding to 16 - 18 mm thick marble stonecounters . vantities etc. Over item No. 7.1 & 7.2 including machines polishing to edge to give high gloss finish etc. Complete as per design approved by Engineer - in- charge. Granite work Granite |
| 33 | Marble/Kota Stone |
| 34 | Providing and fixing 1st quality standard white, grey, ivoty, fume red brown, light green, light blue and other light shades glazed tiles ISI marked [IS : 13753] of size 300mm x 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls and pillar.) |
| 35 | Supplying and fixing in walls machine cut and polished stone shelves, tands and sills in CM 1:3 with machine cut edges. Kota stone 25to 30mm thick.(PWD BSR 2019 Page No. B-6a/35 Item No. 6.16.4) |
| 36 | Providing and fixing externa lgrade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure \"A\" 35mm thick commercial veneer both side |
| 37 | Add extra in Flush doors : For external teak wood lipping on flush door. 35mmx6mm |
| 38 | Painting withenamel paint of approved brandand manufacture to glve an even shade two or more coats on new works (PWD BSR 2019 Page No B.128 Code no. 12.68.1) |
| 39 | Steel Work in built up tubular trusses including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete above plinth level upto 4.5 mtr height.hot finished welded type tubes (PWD BSR 2019 Page No. B-77 Item No. 9.5.3) |
| 40 | Provinding corrugated G.I. Sheet roofing fixed with G.I.J. or L hooks bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coat of approved paint on over lapping of sheet complete (upto a pitch of 60\") & excluding the cost of purlins rafters and truses, for class of sheets : 0.60 mm thick (PWD BSR 2019 Page No. B-10/108 Item No. 10.25.3) |
| 41 | Dismantling stone slab tarrazo chips flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 mtr lead. |
| 42 | Dismantling old plaster or skirting, raking out joints and eleaning the surface for plaster incl, disposal of rubbish to the dumping ground within 50 mtr lead |
| 43 | Dismantling Chajja and shelves with care including making jhiries and making good |
| 44 | Dismantling tile work in floor and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 mtr lead. For thickness of tiles 10mm to 25mm |
| 45 | Making Rebaring of steel reinforcement 8mm to 25mm dia. Bar including drilling of hole by mechanical means in RCC encasing reinforcement & filling apoxy by gun. |
| 46 | Providing and fixing chicken mesh in plaster for column beam & wall joints. |
| 47 | Providing and fixing 75 mm widen decorative border in different shades and in all colours for glazed tiles |
| 48 | 35mm thick Rough chiesel dressed stone flooring of approved shade set in pattern over 20mm thick base of cement mortar 1:6 and jointed with cement sand mortar 1:3 complete in all respects: Kota Stone (P No S-3 I N o 11.40.a3) |
| 49 | P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (I.S: 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor:Size 530x410 mm |
| 50 | P & F I Qulity WVc Urinal (IS: 2256 mark) with 25mm dia GI waste of pipe dome waste coupling concealed iron brackets or screw etc complete Mini stall size 455X385X350mm |
| 51 | P & F WVC wash basin (1st quality, I.S.: 2556 mark) of approved make with C.P. pillar cock (I.S.: 8934 mark) & 32mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.Size 580 X450 mm |
| 52 | P & F Beveled edge Mirror of special glass of approved make complete with 6 mm thick asbestos cement sheet ground fixed to wooden screw & washers. Size 600 x 450mmx4mm thick. |
| 53 | P& F Gratting of approved quality/make stainless steel sheet size 125 mm dia. |
| 54 | P & F GI pipes (Internal works) with GI fitting excluding Union (IS 1239 mark) and MS clamps, including cutting and Exposed on wall 15 mm dia nominal bore B class |
| 55 | 25 mm dia nominal bore B class |
| 56 | Making connection of GI distribution branch with GI main including all fitting upto 25mm dia. |
| 57 | S&F G.I/. Union ISI Marked In G.I. Pipe line as required complete in all respect of size. 15 mm dia nominal bore |
| 58 | 25 mm dia nominal bore |
| 59 | P & F Bib cock (IS : 8931 mark) superior quality of approved make Brass 400 grams. C.P. bib cock 15mm nominal bore. |
| 60 | P&F Inlet connection (Angle Valves) Superior quality, of approved make, for Wash basin, gyser etc, C.P, Inlet connection 15 mm brass (IS : 8931 marked) |
| 61 | Providing & laying C.C. 1:5:10 (stone aggregate 40mm nominal size) all around S.W. pipe including 15Cm. Thick bed concrete(width W = diameter of pipe in cm+30cm) copncrete width to be reduced from width W at center of pipe to O at top of pipe,(excluding cost of pipe)150 mm dia S.W. pipe |
| 62 | P&F rigid PVC pipe fitting (IS : 4985 mark) of approved quality/makw including joining the pipe with solvent cement ruber ring and lubricant : Coupler 110 mm dia |
| 63 | Plain Tee 110 mm dia |
| 64 | Bend 87.5 110 mm dia |
| 65 | Plain Floor Trap 110 mm dia |
| 66 | Pipe Clip 110 mm dia |
| 67 | P & F rigid PVC pipe (IS:4985 mark) class II(4kg./Cm.) approved quality / make including joining the pipe with solvent cement rubberring and lubricant.110 mm dia |
| 68 | 160 mm dia |
| 69 | Construction of Main hole, in all types of soil, inner size .90 * .60 M, with 450mm thick masonry in CM 1:6, 10 CM. thick cement concrete 1:5:10 in foundation, 20mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 gradeC.C. flooring Ferro cement cover with frame of 450mm dia earth work etc complete including disposal of surplus earth with in 50 mtr lead as per design Depth up to 0.5 M |
| 70 | P & F kitchen & Lab Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up to floor level complete including cutting and making good the wall & floor : 1.0 mm thick steel stainless steel AISI-304 kitchen sink of approved make with large waste coupling 37X18X7 |
| 71 | Electric Work |
