Annual repair to different Residential Building (R&B works and S & P works) of section II & section III under Krishnagar construction Sub-Division No III, under Nadia Construction Division,P.W.D.in the district of Nadia during the year 2025-2026.- 1 Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately) (a) Upto area 2.5 Sq.m 2 Taking out Mirzapur or glazed porcelain tiles carefully by chiselling from walls or floor including stacking serviceable material as directed. 3 Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineer-in-Charge prior to execution will be necessary). (Payment to be made on area cleared) 4 Uprooting and removing plants from the surface of walls parapet etc and making good damages. (Repairing of damages to be paid separately). (b) Medium size plant of girth of exposed stem above 75 mm. but not exceeding 150 mm. lift upto 6 mtr. 5 Uprooting and removing plants from the surface of walls parapet etc and making good damages. (Repairing of damages to be paid separately). (a) Small plant of girth of exposed stem upto 75 mm. lift upto 6 mtr. 6 Removing old scales, blisters etc. of interior surface of walls,ceiling by scraping etc. and preparing smooth and even surface with rendering or cement mortar (1:2) (as necessary), to make the surface suitable for receiving distemper. (Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge). 7 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar b) 20 mm thick plaster 8 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (First floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar b) 20 mm thick plaster 9 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface : (iv) Two coats (with any shade except white) 10 (iii) One coat (with any shade except white) 11 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface :(iv) Two coats (with any shade except white) 12 (iii) One coat (with any shade except white) 13 Supplying, fitting, Fixing Fly / Mosquito proof nylon net on any type of window,door shutter frame with necessary fixing arrangements complete. 14 Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) standard quality 15 Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC. (In Ground Floor) i) Water based interior grade Acrylic Primer 16 Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturers specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e) I (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. (B) Light Colour 17 Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor. (a) 35 mm thick shutters (single leaf) 18 Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.vii) 100mm. X 58mm. X 1.90mm. 19 Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws: 75 x 45 x 2.5mm. 20 Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (iv) 150mm long x 10mm dia. bolt. 21 Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (a) With continuous plate base (Hexagonal/ Round rod) (ii) 100 mm grip x 10 mm dia rod. 22 Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (a) With continuous plate base (Hexagonal/ Round rod) (ii) 75 mm grip x 10 mm dia rod. 23 Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete. ii) 250mm x 16mm dia bolt. 24 Washing and cleaning with oxalic acid powder using 33 gms./sq.m. (a) Marble floor/ marble dado 25 Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. 26 Removing scum form the bottom floor of service latrine washing the floor thoroughly and treating the same with liberal sprinkling of bleaching powder (including cost of bleaching power) 27 Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) (i) 3 mm thick (weighing 7.4 kg/Sq.m) 28 Brick work with 1st class bricks in cement mortar (1:6) b) In super structure, Ground floor 29 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. 30 Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturers specification In Ground floor:iii) Two coats. 31 Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.(a) With P trap 32 Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete.i) Polythene Flush Pipe 33 Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.(a) E.W.C. (ii) Plastic (hallow type) white 34 Supplying, fitting and fixing Closet seat of approved make with lid and C.P.hinges, rubber buffer and brass screws complete. (b) Anglo Indian (ii) Plastic (hallow type) white 35 Supplying, fitting and fixing PTMT Smart Shelf of approved make of size 300 mm 36 Supplying, fitting and fixing towel rail with two brackets. ii) 25 mm dia. and 600 mm long 37 Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. 38 Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete as per direction of the Engineer - in - Charge. 39 Cement concrete (1:1.5:3) with graded stone chips 5.6 mm size with hexagonal square mesh wire netting, I.R.C. fabric mesh or X.P. M. fitted and fixed after tying the existing reinforcement on concrete without distributing the same and with proper scarping and cleaning the reinforcement and disturbed concrete with wire brush etc. after applying a coat of cement including the cost of wire netting I.R.C or X. P. M. & cost of all handling and scaffolding complete as per direction of Engineer-in -charge.b) 25 mm thick 40 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:6 cement mortar(c) 15 mm thick plaster 41 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:4 cement mortar(c) 10 mm thick plaster 42 Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-incharge.This item should be executed only after prior approval of the Engineer-incharge). Firstly, one number to be paid and then labour rate for shifting up to further nineteenth (19) times @ 10% each time to be considered. If necessary further after twenty times of total use, another one number new and labour rate for shifting to be considered accordingly. a) 3.90 metre height 43 Shifting Charges 44 Ordinary Cement concrete (mix 1:2.4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes 45 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. Other than SAIL/ TATA/RINL 46 Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)- 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. 47 Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of anySI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work). Door frame. (Top & sides).(A)in 10-12 Micron thickness Annodizing film 1) Natural white 48 ii) Shutter : Top rail. 49 Bottom and top member 50 Movable door shutter Door vertical. 51 Glazing clip. 52 Supplying Aluminium casted body hydraulic door closer as per I.S.I. 53 Supplying 125 mm. Dia acrylic handle for aluminium door as per approved make & brand(a) Natural Colour 54 Supplying Zinc powered coated star lock (Natural White) 55 Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)GF 56 Taking out rain water down pipes, removing chokages and refixing the same in position including mending good damages (of taking out and refixing) 57 Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. A) UPVC Pipes: (iii) 160 mm. Dia. 58 (ii) 110 mm. Dia. 59 Bend 87.5 degree, 160 mm. Dia. 60 Plain Tee, 110 mm. Dia. 61 Taking out shutter of door and window, dismantling by parts (for repair or replacement of damaged parts) , reassembling and refitting and rehanging same with old fittings but with new screws as necessary. (Where different parts of same shutter are renewed under different item, payment under item 73 will be made once only). 62 Reparing collapsible gate by cutting out all rivets as necessary reassambling all members including welding pieces of channels, sraightening bent bars and rivetting with new rivets and fitting in position and painting two coats. 63 Supplying, Fitting & Fixing Factory made P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm long M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer‟s specification and direction of Engineer-in-Charge. 64 Cleaning and removing conservancy garbage mixed with rubbish & other filthy materials from the road side flank, drain and compound including cutting, loading, unloading to and from truck or cart by Mathor labour & removing the same to any distance. 65 Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm. b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. 66 Cleaning and disinfecting upto 2000 litre Water Tank including masonry reservoir. 67 Cleaning and removing mud above 2000 litre Water Tank including masonry reservoir. 68 Removing chokage in G.I. pipe including cleaning pipe. i) 15 mm 69 Supplying, fitting and fixing pillar cock of approved make. b) PTMT Pillar Cock - 15 mm. (Prayag or equivalent). 70 Supplying, fitting and fixing bib cock or stop cock. d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). 71 Supplying, fitting and fixing bib cock or stop cock. ii) Chromium plated Concealed Stop Cock (Equivalent to Code No. 514(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand). 72 Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. 450 mm long 73 Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. 600 mm long 74 Supply of G.I. plug, m15 mm Dia 75 Renewing brass spindle and valve of stop cock/bib cock/push cock/pillar 15 mm Dia 76 Supplying, fitting and fixing Waste fittings complete. C.P. over brass 32 mm 77 Renewing C.I. clamp for pipe including cutting hole in wall etc. 15 mm 78 Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 900 mm long 79 Supply of G. I. pipes of TATA make including necessary sockets d) 32 mm dia. ii) Medium quality 80 Supply of long screw (150 mm long) of TATA make with sockets (TATA make) and jamnut. 32 mm 81 Labour for fitting and fixing G.I. pipes above ground (exposed) in structures with holder bat clamps including cost of jointing materials, holder bat clamps etc.,as necessary, including cutting pipe, making threads etc. complete in all respect with two coats of painting with approved paint any height. (Payment will be made on the centre line measurement of the total pipeline including specials. Payment of painting will be paid seperately) 32 mm Dia 82 Supply of G.I. plain tee of approved brand and make15 mm Dia 83 Supply of G.I. plain tee of approved brand and make40 mm Dia 84 Supply of G.I. plain tee of approved brand and make32 mm Dia 85 Supply of G.I. short piece of TATA make (Above 50mm & upto150 mm long) 15 mm Dia 86 Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 600 mm long 87 Labour for fitting and fixing G.I. specials including cost of jointing materials.b) Socket, Reducing socket, Bend, Plain equal elbow, Reducing elbow, Nipple, Short piece. (i) Upto 25 mm dia. 88 Labour for fitting and fixing G.I. specials including cost of jointing materials.(c) Plain tee, Reducing tee, Pendent tee, Jamnut, Socket and Nipple. (ii) Above 25 mm upto 50 mm dia. 89 Supplying, fitting and fixing pillar cock of approved make. a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model - Tropical / Sumthing Special of ESSCO or similar brand). 90 Cleaning wash basin/ sink with acid. 91 Cleaning E.P. or Anglo-Indian W.C. with acid. 92 Cleaning urinal with channel with acid. 93 Cleaning glazed tiles with acid. 94 Dismantling flush pipe of water closet. 95 Refixing flush pipe of water closet. 96 Removing chokage in G.I. pipe including cleaning pipe. i) 15 mm 97 Supplying, fitting and fixing bib cock or stop cock. c) (ii) Chromium plated Bib Cock (angular shape with wall flange) (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar brand). 98 Renewing C.I. clamp for pipe including cutting hole in wall etc. and mending good mending good mending good all damages (i) 15 mm 99 Renewing C.I. clamp for pipe including cutting hole in wall etc. and mending good mending good mending good all damages (ii) 20 mm 100 Renewing C.I. clamp for pipe including cutting hole in wall etc. and mending good mending good mending good all damages (iii) 25 mm 101 Supplying, fitting and fixing low-down cistern parts. i) Internal fittings for cistern complete of approved make. 102 Supplying, fitting and fixing low-down cistern parts. (iii) Intlet Assembly 103 Supplying, fitting and fixing low-down cistern parts. (iv) Rubber Kid 104 Supplying, fitting and fixing low-down cistern parts. (v) Knob 105 Supplying, fitting and fixing bib cock or stop cock. (e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) - 15 mm 106 Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) For Exposed Work15 mm Dia 107 Labour for dismantling G.I. pipe with fittings. 15 mm Dia 108 Labour for dismantling G.I. pipe with fittings. 20 mm Dia 109 Refixing G.I. pipe with fittings after cleaning where necessary.. 15 mm Dia 110 Refixing G.I. pipe with fittings after cleaning where necessary.. 20 mm Dia 111 Labour for dismantling G.I. pipe with fittings. 40 mm Dia 112 Refixing G.I. pipe with fittings after cleaning where necessary.. 40 mm Dia 113 Cleaning silt of inspection pit. 114 Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. above 150 mm. thick 115 Cleaning soak pit by removing the top slab and replacing inner filling with jhama bats and repairing the pit as necessary including fitting the slab. 116 Supplying, fitting and fixing in position R.C.C. Manhole/ pit cover of approved make with rim of approved make (Heavy type) i) 450 mm dia. 117 Making connection with the existing pit. 118 Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. (a) Sink only, 630 mm X 550 mm X 180 mm 119 Supplying, fitting and fixing Peets valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). 40 mm dia 120 ADD : GST - 18% (SGST= 9% & CGST = 9%) 121 ADD : WEST BENGAL LABOUR WELFARE CESS = 1%
