Tender For Conversion Of Rural Shcs To Ssk-health wellness center At Dahi Sc Under Sankrail Block, Jhargram District.- 1 Civil Works 2 Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. (both Ground & 1st Floor) 3 Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m- in Ground floor 4 Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m- in 1st floor 5 250 mm thick Brick work with 1st class bricks in cement mortar (1:6)(b) In superstructure,1st floor 6 250 mm thick Brick work with 1st class bricks in cement mortar (1:6)(b) In superstructure,Ground floor 7 125 mm. thick brick work with 1st classbricks in cement mortar (1:4) in 1stfloor. 8 Taking out carefully G.C.I. or C.I. or asbestossheets (including ridges etc.) from roof or wallafter unscrewing bolts, nuts, screws etc.andstacking the material at site as directed. 9 Hire and labour charges for shuttering with necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing...25 mm to 30mm wooden shuttering (in First Floor) 10 Do- In Ground Floor 11 Ordinary Cement Concrete (mix-1:1-5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in 1st floor as per relevent IS codes. (i) With Pakur Variety 12 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary),.. JSW/JSPL/SHYAM/SRMB/BMASL/ ELECTROSTEEL/SSL(In First Floor) 13 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary(Ground floor (i) With 1:6 cement mortar(c) 15 mm thick plaster 14 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary(1st floor).[Excluding cost of chippingover concrete surface(i) With 1:6 cement mortar(b) 15 mm thick plaster 15 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (1std floor).[Excluding cost of chipping over concrete surface(ii) With 1:4 cement mortar (c) 10 mm thick plaster 16 Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existining..- (A) Floor- With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. Other than Coloured decorative including white-Area of each tile upto 0.09 Sq.m- Gr. Floor 17 Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. …...manufacturers specification and direction of Engineer-in-Charge (In 1st Floor)- With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment- Light Colour(1st floor) 18 Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors….(B) Wall -With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry ...- Area of each tile upto 0.09 Sq.m- Other than Coloured decorative including white- In ground floor 19 Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors…-With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m- In FLOOR - 1st floor-Area of each tile Upto0.09 Sq.m- Other than Coloured decorative including white 20 Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors….(B) Wall -With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side ....- Area of each tile above 0.09 Sq.m- Other than Coloured decorative including white- In 1st floor 21 Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete- Upto area 2.5 Sqm 22 Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. 23 Neem, Jam, Jackfruits 24 Panel shutters of door and window, as per design , including fitting and fixing the same in position but excluding the cost of hinge and other fittings.- 35mm thick shutters with 19mm thick panel of size 30 to 45 cm.-Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.-In ground floor. 25 (a) M.S. or W.I. ornamental grill of approved design joints continuously welded with M.S.,W.I Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in 1st Floor 26 Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. 27 Do- in Ground Floor 28 Supplying, fitting and fixing windows and ventilators …………………. to match with existing surface complete in all respect excluding glazing. - Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only]- In 1st Floor 29 Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials 30 Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) 31 (b) 40mm x 6 mm, 200mm length 32 Iron Butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. 33 (ii) 100mm x 58mm x 1.90mm 34 Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. 35 (b) 250mm long. 36 Iron socket bolt of approved quality fitted and fixed complete 37 d) 225mm long x 10mm dia bolt 38 Steel body foot-door holder. 39 Anodised aluminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete : 40 With continuous platebase(Hexagonal/Round rod) 41 (iv) 125mm grip x 10mm dia rod 42 Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish)… 43 PVCDoor Shutter-37 mm thick (i) In 1st floor 44 Do- in Ground Floor 45 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC. _in Ground Floor (One Coat) 46 1st Floor (One coat) 47 Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost ofprimer. 48 In Ground floor (Two Coat)-Premium 100% Acrylic Emulsion 49 In first Floor 50 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturers specification) including cleaning and smoothning of surface. Two Coats 51 Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparingthe surface throughly, complete as per manufacturers specification and as per direction of the EIC-Two Coats-Water based interior grade Acrylic Primer 52 (i) In Ground Floor 53 (ii) In 1st Floor 54 Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement,if any, in 1st floor as per relevant IS codes- Pakur variety 55 Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with waterin proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturers specification 56 Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement (or at manufacturers specified rate) for concrete of various grades 57 (b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. 58 Do- on wooden surface 59 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. includingusing of approved putty etc. on the surface, if necessary (b) On steel or other metal surface 60 Withhi-gloss of approved quality- 61 (iv) Two coats (with any shade except white) 62 Do- on wooden surface 63 Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns, wall, facia etc. with 15 mm thick [avg] cement mortar (1:2) including .... including cost of all materials, labours, scaffolding, staging ,curing and roughening of concrete surface complete. Area of each Granite slab > 0.6 upto 1.0 square metre. 64 Supplying, fitting and fixing 18 mm. to 22 mm. thick kota stone slab in wall,… [Using cement slurry for bedding @4.4 kg/Sq.m and for jointing @1.8 kg/Sq.m] 65 Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. 66 4mm thick coloured/tinted/smoke glass 67 Sanitary & Plumbing Works 68 Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc... 69 (i) For Exposed Work-20 mm 70 (ii)32 mm 71 (iii) For Concealed Work-20 mm 72 Labour for hoisting plastic water storage tank. 73 (i) Upto 1500 litre capacity. 74 Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. 75 Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. 76 (iii) 630 mm X 450 mm size 77 Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. (a)Sink Only. 78 (i) 630 mm X 550 mm x 180 mm 79 Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. 80 (v) 900 mm long 81 Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 82 (iv) 1050 mm long 83 b) PTMT (polytetra Bib cock/stop cock)- 15 mm. (Prayag or equivalent 84 Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.(a) With P trap 85 Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete.ii) Polythene Flush Pipe 86 Supplying, fitting and fixing porcelain soap tray of approved make 87 (i) Recessed soap tray of size 150 mm X 150 mm 88 CP Pillar Cock with 200 mm extended Lever Handle (Equivalent to Code No. 5031 & Model - FLORENTINE of JAQUAR or similar brand). 89 Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 90 (i)DoubleSocketed 3 Meter Length-110mm 91 UPVC Fittings 92 Plain Tee-110 mm 93 Plain Y-110mm 94 Bend 87.5º-110mm 95 Bend 45º-110mm 96 Pipe Clip -110mm 97 Vent Cowl-110mm 98 Socket Plug -110mm 99 Supplying, fitting & Fixing closet seat of approved make with lid and CP, hinges, rubber buffer and brass screws complete, EWC plastic(hallow type) white. 100 Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary.... - Above ground- 110 mm dia. 101 Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding P or S trap -580mmx440mm 102 Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.- 550mmX400mm 103 Supplying, fitting and fixing towel rail with two brackets.-C.P. over brass-25 mm dia. and 600mm 104 Electrical Work 105 Wiring in 1.1 KV grade single core stranded FR PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. 106 2 x 36/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC ] 107 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) 108 Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface] 109 Average run 6 mtr (Sub. Item No. : (b)) 110 Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.(For Television) 111 Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. 112 Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc. 113 Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 23 cm (9) 114 Supply & Fixing louver shutter on wall with necy.. bolts & nuts (6 mm dia x 62 mm long ) For Al : 23 cm Exhaust fan (9) 115 Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long ) or as reqd. Incl. S&F 24/0.02 PVC insulated Flexible copper wire 0.5 mt.length 116 Supply of 48 inch sweep ceiling fan Similar to --Orient New Breeze/Summer King/Usha-Striker make 117 Supply of 9 inch sweep heavy duty exhaust fan Similar to---EPC make/Orient (Rate Analysis at SPMU) 118 Supply & Fixing full Metal body AC Cabin fan 16 sweep with net guard and all accessories ( Make EPC Tempest / cinni / CG) 119 Supply & delivery of single 4ft Batten type LED tube light fitting,1200 mm, Efficacy>= 100 lm/W, THD<10%, complete with all accessories. (Havells: LED Pride Plus NXT Batten 22 W 6500 K) or equivalent of Philips, Crompton etc. [Approved by EIC] 120 Supply & Delivery of 45 watt LED Outdoor Type Luminiares along with all accessories complete as required [Crompton-model no-LSTS-45-CDL-M] or equivalent of Havells, Philips etc 121 Supply & Delivery at site 9 watt LED Bulb[Make-Crompton] or equivalent of Havells, Philips etc. 122 Fixing only single /twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener 123 Fixing only lamp 124 Labour Welfare Charges1% 125 GST 18%
