Construction of Godown for storing Equipment for Conservancy Workers at Kalna Municipality Office-1P-165/S1-18 Providing False Ceiling made with framework of steel tube of 40mm x 20mm of not less than 18 gauge, the long and cross section will be welded with cach other 1000mm to 1200mm apart the entire framework will be fixed in wall using rawiplug or gutties or screws etc and suspended from ceiling with M.S flat 19mmx3mm as necessary, the entire frame will be painted with red oxide. PRINTED LAMINATED PVC Section 150mm x 12mmx 1.00mm (+/-0.01mm) of approved quality and colour will be fixed on the frame so that the entire framework will not be visible from below P. VC Section will be fixed with the frame with the help of self tapping steel screws including all materials and labour charges including fitting, fixing the same and hoisting including mending the damages in all respect and cost of paint as required as per direction of Engineer-in-Charge In First floor 2 P. N. -173/Item no. -2(iv) Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge (excluding the cost of supporting frame work and teak wood batten/Lipping] (iv) 12mm Deduction for door 3P-179/SL-14,1 Supplying fitting, fixing decorative lamination conforming to IS: 2046: 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF/Ply Boards with recommended/approved adhesive with proper clipping the sides for better attachment as per direction of Engineer incharge. The rate includes the cost of labour, adhesive and all incidental charges thereof (i) Thickness of laminate 1.5 mm Deduction for door 4 P. N.-198/Item no. -5(1) Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved. make & brand (1.5 mm thick) For ceiling Fon It flom Intinal Surfue For Walls Deduction for door Deduction for window 5 Rate Analysis Attached 125mm thick brick work with Ist. class bricks in cement mortar (1:4) a) In roof For parapet wall 6 Rate Analysis Attached Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary. In roof with 1:4 cement mortar 15 mm thick plaster For new parapet wall For existing 750mm parapet wall P. N. 196 Item no. -8 Applying Exterior grade Acrylic primer of approved. quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC (a) Two Coats For Outer Walls in ground floor For Outer Walls in first floor Deduction for door For Parapet wall area in roof (second floor) Same as parapet plaster area P. N. -197 Item no.17 Protective and Decorative Acrylic exterior emulsion. paint of approved quality, as per manufacturers specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer a) Normal Acrylic Emulsion (same as primer area) For Outer Walls in ground floor For Outer Walls in first floor For Parapet wall area in roof (second floor) 3rd Corrigenda P.N.-91 Item no-10 MS or WL Ornamental grill of approved design joints continuously welded with MS, WI. Flats and bars of windows, railing etc fitted and fixed with necessary screws and lugs In Second Floor Grill weighing 10 kg/sqm to16 kg/sqm assuming 14 kg/sqm in average P. N. -152 Item no.-31 Taking out shutter of door and window, dismantling by parts (for repair or replacement of damaged parts). reassembling and refitting and rehanging same with old fittings but with new screws as necessary, (Where different parts of same shutter are renewed under different item, payment under item 73 will be made once only) For Doors P. N. -114 Item no. - 1 Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals) (d) Sal: Local For Doors P. N.-11 Item no. - 08 Taking out carefully GCI, or CL, or asbestos sheets (including ridges etc) from roof or wall after unscrewing bolts, nuts, screws etc. and stacking the material at site as directed (Payment to be made on measurement of portionof roof or wall removed.) P. N. -82 Item no.14 Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq metre (foliowed by colour coated on both side) steel sheet work having mitimum yield strength of 550 Mpa of trapizoidal profile of approved make screw, EPDM Washer le mm dia &3 mm th, washer ete, complete witit 150 mm end lap and one corrugation minimum side lap in Roof-a) With 0.5 mun thick sheet In Wall Chalon With 0,5 mm thick sheet P. N. -114 Item no. 1 Supplying, Fitting & Fisang 30 mm thick Factory made moulded Door shutter, consisting of solid core single leaf flush door of 30 nam thickness lipped with 15mm [5mmx3] tick x 30 mm wide on one style and top rail and 10 mm 15mmx2) thick x 30 mm wide of the other style and bottom rail. The inner panel luminated with 2 mm thick termite proof water proof and fire resistant moulded PVC sheet with raised panel designed in differant piain/ or Prelam cokur on one side after routing the moulded design on flash door and 2mm plain and or Prelam PVC sheet on other side using rubber adhesive ou flash door and solvent coment adhesive on the PVC lipping etc, compiete excluding hardwares as necessary as per direction of Engineer-in Charge, Manufacturers Specification and drawing In ground floor (b) Moulded door using 2 mm Prelam moulded PVC shezt on hoth side, P. N. -140 Item no. -4 Supplymg, fitting and fixing M.S, clamps for door and window frame made of flat bent bar, and bifurcated with necessary serows etc, hy coment concreter 12:4) as per direction (Cost of concrete will be paid separately) (a) 40mm N 6mm, 250mm Length P. N.-140 Item no.5 Iron butt hinges of approved quality fitted and fixed with steel screws, witb ISI mark (vi) 100mm X 50mm, X1.25mm P. N. -144 Item no.26 Anodised aluminium barrel/tower/socket bolt (full covered) of approved manufactured from extruded section conforming to 18 204/74 fitted and fixed with cadmium plated screws (iv) 150mm long x 10mm dia, Bolt P. N. -141 Item no.10 i) tron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre belt and round fitting (b) 250mun long P. N. -145 Item no.30 Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to IS specification (1,5, 230/72) fitted and fixed complete bi With round base (v) 150 mm grip-x 10 mm dia rod P. N. 143 Item no.-19 Door stepper, (Bass) P. N. -200 Item no. 1(b) Priming one coat on tumber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc For Inner Wals For Doors Deduction for Door Deduction For Window P. N. -200 Item no.1(a) (a) Priming one cout on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc For window For Grill P. N. -200 Item no.2/A/a Painting with best quality synthetic enamel paint of approved make and brand including smoothening, surface. by sand papering etc (a) On timber or plastered surface With super gloss (hi-gloss) (iv) Twe coats (with any shade except white) Same as Interior Primet P. N. -200 Item no.2/A/b Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. (b) On steel or other metal surface: With super gloss (hi-gloss) (iv) Two coats (with any shade except white) Same as steel primer P. N. -66 Item no.36 Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc, set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @2.91Kg/sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any hacking course) laid after application slurry using 175 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturers specification and direction of Engineer-in-Charge (White cement, synthetic adhesive and grout material to be supplied by the contractor) (1) With application slurry @1.75 kg/Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq m white cement for joint filling with pigment (B) Light Colour For Floor 3nd com P. N. -245 Item no.15 Supplying, fitting & fixing of 2-Track/3-Track Aluminium slading Window of all Aluminium sections viz, window frame (top, bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz, PVC roller, EPDM gasket, maruti lock, screws etc including labour charges. for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge, 10-12 Micron thickness Annodizing film Natural white [Note for estimate purpose construction wing may consider weight of 2-track Aluminium window @5.5 Kg por Sq M and 3-track Aluminium window @ 6.5 Kg per Sq.M] P. N. -243 Item no.- 09/vi Supplying bubble free float glass of approved make and brand conforming to IS. 2835-1987 vi) 6mm thick coloured/tinted/smoke glass- P. N. -243 Item no.-09/vi Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cemen (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sqm all complete Including all materials and labour 3 mm thick topping (High polishing grinding on this item isnot permitted with ordinary cement) Using grey cement In Second Floor (ii) 25 min thick For Roof (Same as Roof Sheet Area) For Open Roof Area nd comi) 13th Corrigenda P.N.-05, Item No-05 Roof treatment by application of non toxic polyurethane modified acrylic based single component (PU Roof Coat solvent free, cold applied polyurethane modified elastomeric waterproofing membrane with excellant UV resistant capasity as per ASTM D6083 [a water based 100% acrylic elastomeric emulsion polymer latex coating used as protective coating for roofs] after preparing the surface by cleaning and repairing the roof cracks by cement & sand mortar (1:4), preferably with antishrinkage mortar (to be paid separately) if any, apply two coats along with a priming coat (two coats of PU Roof Coat and one coat of primer coat compatible with main product as per manufacturers specification) and reinforced with or without 20 gsm Geotextile Fleece. including the cost of primer coat and base preparation tools & plants but excluding the cost of scaffolding and stagging complete as per direction of Engineer-in-charge (Note If Geotextile Fleece not used, the rate would be reduced by Rs. 5/- per Sqm) For Roof (Same as Roof Sheet Area) For Open Roof Area Supply and Fixing of 2 mm Polyvinyl glow sign board made of 22 SWG GI sheet box with 5X12 aluminum channel for fixing the vinyl board after necessary cutting the letter as required & sf LED tube light fittings along with all accessories (12X2-24
