|
| 1 | ItemNo.1:Excavationforfoundationinearth,soilofalltypes,sand,gravelandsoft murum, including removingtheexcavatedmaterialuptoadistanceof50m.beyond thebuildingareaand stackingandspreadingasdirected,dewatering,preparingthe bedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Add.Spec: Bd.A.1 Page No. 259 SSR 2022-23 Sr.No.714 It.No.21.02 |
| 2 | Item No.3 :Providingsoling using80mm sizetrapmetalin15cm.layerincluding filling voidswith Crushed sand/grit, ramming, watering etc. complete.Add.Spec: As directed by Engineer in charge. SSR 2022-23 Sr.No.747 It.No.21.40 |
| 3 | ItemNo.06 :ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20of trap / granite/quartzite/gneissmetalforR.C.C. columnsasperdetaileddesignsand drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionfinishingtheformedsurfaceswithcementmortar1:3ofsufficientminimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).withfullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Add.Spec: Bd.F.5 Page No. 300 and B.7, Page.No. 38 SSR 2022-23 Sr.No.834 It.No.25.31 |
| 4 | ItemNo.07 :ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20of trap/granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or asdirectedincludingsteelcentering,formwork,coverblocks, laying/pumping,compactionand roughening the surface if special finish is to be providedandcuringetc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Typemixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate (Crushed sand VSI Grade) Add.Spec: Bd.F.6 Page No. 300 and B.7, Page No.38 SSR 2022-23 Sr.No.839 It.No.25.50 |
| 5 | Item No.08 :- ProvidingandlayingCastinsitu/ReadyMixcementconcrete M-20of trap/ granite /quartzite/gneissmetalforR.C.C. slabsand landings as perdetailed designs anddrawings including steel centering, formwork, cover blocks, laying/pumping, compactionfinishingtheformedsurfaceswithcementmortar1:3ofsufficientminimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).withfullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Add.Spec: Bd.F.8 Page No. 302 and B.7, Page No.38 SSR 2022-23 Sr.No.844 It.No.25.70 |
| 6 | ItemNo.09: - ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/ granite/quartzite/gneissmetalforR.C.C.chajjaasperdetaileddesignanddrawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface ifspecial finish is to be provided and curing complete. (Excluding reinforcementandstructuralsteel).with fully automatic micro processor based PLC withSCADA enabledreversibleDrumTypemixer/concreteBatchmixplant(Pan mixer)etc.complete.Withfineaggregate (Crushed sand VSI Grade) Add.Spec: Bd.F.9 Page No. 303 and B.7, Page No.38 SSR 2022-23 Sr.No.849 It.No.26.05 |
| 7 | Item No.10 :Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C.pilecaps,footings,foundations,slabs,beamscolumns, canopies,staircase,newels, chajjas,lintelspardis,copings,fins,archesetc.asper detaileddesigns,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.Add.Spec: Bd.F.17, Page No. 306 SSR 2022-23 Sr.No.864 It.No.26.33 |
| 8 | Item No.12 :Providing secondclassBurntBrickmasonrywithconventional/I.S.type bricksincement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposedfaces, raking out joints on exposedfaces and watering etc. Complete.Add.Spec: Bd.G. 1 Page No. 313 SSR 2022-23 Sr.No.882 It.No.27.01 |
| 9 | Item No. 13 :Providing secondclassBurntBrickmasonrywithconventional/I.S.type bricks in cementmortar 1:6 in superstructure including striking joints, raking out joints,wateringand scaffolding etc. Complete Add.Spec: Bd.G.5 Page No. 315 SSR 2022-23 Sr.No.885 It.No.27.05 |
| 10 | Item No. 14 :Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placedat every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete.e Add.Spec: Bd.G.5 Page No. 315 SSR 2022-23 Sr.No.885 It.No.27.06 |
| 11 | Item No.15 :ProvidingandfixingheavydutyinterlockingconcreteColouredpavingblocksof60mm thickness of having a strength of 300 Kilogram/Sq.cm. of approvedquality andshape ona bed of crushed sand of 25 to 30 mm thick including skA directed by Engineer in charge SSR 2022-23 Sr.No.829 It.No.33.51 |
| 12 | ItemNo.16 :Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.Cmembersandbrickwork,ofapprovedqualityincludingfixing meshinpositionby necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.With fine aggregate (Crushed sand VSI Grade) Add.Spec: As directed by Engineer in Charge: SSR 2022-23 Sr.No.834 It.No.32.26. |
| 13 | Item No.17 : Providing andapplying Twocoats ofwall care Putty onplastered surface and CeilingandWallstopreparesurfaceevenandsmoothofapprovedmake,etc complete. Add.Spec: As directed by Engineer in charge. SSR 2022-23 Sr.No.978 It.No.32.34 Add.Spec:BD-T-36Page One Number 500 SSR 2022-23It.No32.34 |
| 14 | Item No.18 :Providinginternalcementplaster 12mm thickinsinglecoatincement mortar 1:5 withoutneerufinishtoconcreteorbricksurfaces,inallpositionsincluding scaffolding and curing etc.complete. Add.Spec: Bd. L.2 Page No. 368 SSR 2022-23 Sr.No.950 It.No.32.03 |
| 15 | ItemNo.19 :Providing internal cement plaster 20mm thick inSingle coats in cement mortar 1:5without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete Add.Spec: Bd.L.4 Page One Number 368 SSR 2022-23 Sr.No.839 It.No.32.06. |
| 16 | Item No.20 : Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete.Additional SpecificationBd. L.10, Page One Number 370SSR 2022-23 Item No.32.15 |
| 17 | ItemNo.21 : Providingsandfacedplasterexternallyincementmortarusingapproved screened sand, in all positionsincludingbasecoatof15mmthickincementmortar 1:4usingwaterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping thesurfaceofthebasecoatroughtoreceivethesand facedtreatment6to8mm thickin cementmortar1:4finishingthesurfacebytaking outgrainsandcuringforfourteendays scaffolding etc.complete. Add.Spec: Bd.L.7 Page No. 369 SSR 2022-23 Sr.No.956 It.No.32.11 |
| 18 | ItemNo.22 :Providing internal cement plaster 20mm thick inSingle coats in cement mortar 1:5without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete Add.Spec: Bd.L.4 Page One Number 368 SSR 2022-23 Sr.No.839 It.No.32.06. |
| 19 | Item No.23 : Providing fine cementfinish1.5 mm thick overgreen plastersurface including scaffolding curing etc. complete.Additional SpecificationAs directed by Engineer in charge.SSR 2022-23 Item No.32.21 |
| 20 | Item No.24:- Providing patti/ band 75mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete.Additional SpecificationAs directed by Engineer in charge.SSR 2022-23 Item No.32.23 |
| 21 | Item No.25 :- Providing patti/ band 100mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete. Add.Spec:As directed by Engineer in charge.SSR 2022-23 Sr.No.844 It.No.32.24 |
| 22 | Item No.26: Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil As directed by Engineer in charge. SSR 2022-23 Item No.39.01. |
| 23 | Item No.27 :Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/candfixing inwallwith6Nosofholdfastof12mm diabars500mm longincluding primer and oil painting etc, complete) frame size 60 mm x 100 mm .Additional SpecificationAs directed by Engineer in charge.SSR 2022-23 Item No.39.56 |
| 24 | Item No.28:Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium platedfixturesandfastenings,withbrassmortiselock,chromiumplatedhandlesonboth sides, and finishing with French Polish etc. complete. Add.Spec: BD-T-34PageOne Number 499 SSR 2022-23 It.No.39.09. |
| 25 | Item No.29 :Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coatofmetelprimerof approvedmake andmanufacture. M.Sframe shallbe coveredwith heat mouled PVC \"C\" channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 Kilogram/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either sfalt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm screwsdrilledsuitabletopassthroughboththewallsoftheM.Stube.Otherhardwares. Add.Spec: As directed by Engineer in charge.SSR 2022-23 Sr.No.950 It.No.39.47. |
| 26 | Item No.30: Providing and fixing in position powder coated aluminium louvered windows / ventilator of varioussizeswithpowdercoatingasperdetaileddrawingandspecificationsincluding aluminiumframes80x38mmx1.22mmboxtype,5mmthicksheetglasslouvers,of approved quality etc. complete..Additional SpecificationAs directed by Engineer in charge.SSR 2022-23 Item No.39.68. |
| 27 | Item No.31 : Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two trackswithrectangularpipe having overalldimension63.50x38.10x1.02mm atweight 0.547 Kilogram/One Running Metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm atweight0.695Kilogram/One Running Metre.Topandside track section61.85x31.75x 1.30 mm at weight 0.659 Kilogram/One Running Metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre.Interlocking section40x18x1.10mm atweight0.469Kilogram/Runningmetre. Andhandle section40 x18 x1.25mm at weight0.417Kilogram/One Running Metre. andtop section40x18x1.25mmatweight0.417Kilogram/Runningmetre.Asperdetailed drawingsandasdirectedbyEngineerinchargewithallnecessaryAluminiumsections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising without boxAdditional Specification As directed by Engineer in charge. SSR 2022-23 Item No.39.38. |
| 28 | Item No.32:- Providing andfixing inposition(asper1868/1982)Aluminium sliding windowofthree tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window framebottomtrack section 92 x 31.75 x 1.30 mmat weight1.070 Kilogram/One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Runningmetre.Theshuttershouldbeofbearingbottom40x18x1.25mmat weight 0.417Kilogram/One Running Metre.Inter locking section 40x 18x 1.10mm atweight 0.469Kilogram/Runningmetre.andhandleandtopsection40x 18x1.25mm atweight 0.417Kilogram/Runningmetre.Asperdetaileddrawingsandasdirectedby Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mmthickplainglassandaluminiummosquitonetshutterwithstainlesssteeljailwithall required screws and nuts etc, complete. With colour Anodising without box As directed by Engineer in charge.SSR 2022-23 Item No.39.42 |
| 29 | Item No.33: Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre asperdrawing including fixtures,necessarywelding andpainting withone coatsof anticorrosive paint and two coats of oil painting complete. Add.Spec: Bd.U.1 Page One Number 537.SSR 2022-23It.No.40.01 |
| 30 | Item No.34 : Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12mmwithrollerwheelsconfirmingtogradeF.G.150fittedwithsnapheadedrivetsof minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clearspaceof150mmbetweentwosetsofcrossingswithholdfasts,stoppers,spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. BD-T-57PageOne Number 511.SSR 2022-23 Item No.39.26. |
| 31 | Item No.35 : Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of1:4cementmortarincludingneatcementfloat,fillingjoints,curingandclearing etc. complete.Add.SpecBd.M. 12 Page One Number385 SSR 2022-23It.No33.40 |
| 32 | Item No.36 : Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. Skirting complete.Add.SpecBd.M. 12 Page One Number385 SSR 2022-23It.No33.41 |
| 33 | Item No.37 : Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete..Add.SpecBd.M. 12 Page One Number385 SSR 2022-23It.No33.24 |
| 34 | Item No.38 : Providingandlayingceramictilesof havingsize30cm.x30cm.andconfirmingto corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.Add.SpecBd.M.13 Page One Number 386. SSR 2022-23It.No33.25 |
| 35 | Item No.39 : Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete...Add.SpecBd.M.22 Page One Number 390 SSR 2022-23It.No33.18. |
| 36 | Item No.40 :Providing sills of polished Kota stone 25 mm to 30mm thick, on a bed of 1:4 cement mortar includingcementfloat,fillingjointswithslurry,curing,mouldingedges,polishingand cleaning etc. complete.Add.SpecBd.M.29 Page One Number 391 SSR 2022-23It.No33.19. |
| 37 | Item No.41 :Providingandfixingblackkadappastoneasshelves25mm.thickmachinepolished, extendingthepolishupto20cmwidthonlowerside,roundingcorners,layinginposition jointing with bedding cement mortar 1:4 proportion curing etc etc. complete.Add.SpecBd.M.29 Page One Number 391 SSR 2022-23It.No33.23. |
| 38 | ItemNo.42 : Providing and fixing on walls/ ceiling/ floors, 15 mm dia. heavy grade having embossed as ISIMarkgalvanisedironpipesweightof1.48Kilogram/metrewithnecessaryfittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Add.Spec: Bd.V.5 Page One Number 551SSR 2022-23It.No.41.10. |
| 39 | ItemNo.43 :Providing and fixing on walls/ ceiling/ floors 20 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 1.93 Kilogram/meter with necessary fitting remaking good the demolishedportionandapplyingprimerofanti-corrosiveoilpaint,2coatsIncluding necessaryscaffoldingandremovingexistingpipelineifnecessaryandconveyingand stacking the same in PWD chowky or as directed etc. complete.. Add.Spec:Bd.V.5 Page One Number 551cSSR 2022-23It.No.41.11. |
| 40 | ItemNo.44 :Providing and fixing on walls/ ceiling/ floors, 25 mm dia. heavy grade having embossed as ISIMarkgalvanisedironpipesweightof3.01Kilogram/meterwithnecessaryfittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.Add.Spec:Bd.V.5 Page One Number 551SSR 2022-23It.No.41.12. |
| 41 | Item No.45: Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. Add.Spec: Bd.V.8 Page One Number 554.SSR 2022-23It.No.41.40. |
| 42 | Item No.46: Providing and fixing 20 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.Add.Spec: Bd.V.8 Page One Number 554.SSR 2022-23It.No.41.41. |
| 43 | Item No.47: Providing and fixing 25 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. Add.Spec: Bd.V.8 Page One Number 554.SSR 2022-23It.No.41.42. |
| 44 | Item No.48: Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. Add.Spec: As directed by Engineer in charge.SSR 2022-23It.No.42.33.. |
| 45 | Item No.49:Providingandfixingcolouredglazedearthenwarelippedflatback/cornertypeurinalwith PVC5litersflushingcisternwithfittings,capacitywithfittings,inletpipeandstoptap, brackets for fixing the cistern, P.V.C. flush pipe withfittings including lead soil pipe, lead trap and soil pipe connection up to the outside face of the wall. Add.Spec:Bd.V.27 Page One Number 564 SSR 2022-23It.No.41.61.. |
| 46 | Item No.50: Providing and fixing coloured glazed earthenware Wash Hand Basin of 55cm x 40 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete.. Add.Spec: Bd.V.30 Page One Number 565.SSR 2022-23It.No.41.66.. |
| 47 | Item No.51: Providingandfixing100mmdiastabiliserpipe/P.V.C.soilvent/wastepipeandwith necessary fixtures andfitting such as bends, tees, single junctions, slotted vent, As directed by Engineer incharge. SSR 2022-23 Item No.42.52. |
| 48 | Item No.52: Providing , laying and fixing ,jointingEco- drain 160 mm SN 4 Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such abends,tees,coupler,etc,jointingwith rubberlubricantincludingnecessary excavation, trench refilling with selective excavated materialetc. complete, As directed by Engineer incharge. SSR 2022-23 Item No.43.31. |
| 49 | Item No.53:Providing and fixing 10 cm PVC nahani trap with grating etc. complete.Add.Spec:BD.V 32 A page 551 and as directed by Engineer incharge.SSR 2022-23It.No.42.67. |
| 50 | Item No.54: Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.Add.Spec: Bd.V.38, Page One Number 572.SSR 2022-23It.No.42.02. |
| 51 | Item No.55: Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting andfixingofaccessoriessuchasinlet,outletoverflowpipeinclusiveofalltankscapacity between 200 to 1000 litersAdd.Spec: As directed by engineer-in- charge..SSR 2022-23It.No.42.53. |
| 52 | Item No.56: ProvidingandconstructingBrickMasonryInspectionChamber60cmx45cmx90cm including1:4:8cementconcretefoundation1:2:4cementconcretechannelshalfround G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete.Add.Spec: Bd.V.43, Page One Number 574 SSR 2022-23It.No.42.12. |
| 53 | Item No.57:Providing,layingandfixingP.V.C.pipeof40mmdia.withfittingssuchasbends,tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removingexistingpipelineifnecessaryandconveyingandstackingthesameinPWD chowky or as directed etc. complete..Add.Spec: As directed by Engineer in charge.SSR 2022-23It.No.43.25. |
| 54 | Item No.58 :ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-20oftrap/granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering,formwork,coverblocks,laying/pumping,compacting,curing,finishingand rougheningthemifspecialfinishistobeprovidedandcuringcomplete.(Excluding reinforcementandstructuralsteel).withfullyautomaticmicroprocessorbasedPLCwith SCADAenabledreversibleDrumTypemixer/concreteBatchmixplant(Panmixer)etc. complete. With fine aggregate (Crushed sand VSI Grade) Add.Spec: Bd. F. 12 Page One Number 304 andB-7, Pg 38 SSR 2022-23 Sr.No.1207 It.No.26.23. |
| 55 | tem No.59 :Providing and applying Bitumen VG30/VG40 layer at 2 Kilogram. per One Square Meterr over the terrace, structural slab including cleaning the surface for waterproofing as directed complete Add.Spec: Bd.J.3 Page One Number 356SSR 2022-23It.No.31.02. |
| 56 | Item No 60 : Providing and applying two coats of exteriorweather shield paint of approved manufacture andofapprovedcolourtotheplasteredsurfacesincludingcleaning,preparingtheplaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etccomplete. NOTE: For Item One Number 15 to 18 prior approval of Superintending Engineer will be necessary .Additional Spec As directed by Engineer in charge. SSR 2022-23 Item No 35.26 |
| 57 | Item No.61 : Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc.complete.Add.Spec:As directed by Engineer in charge. SSR 2022-23It.No.26.23. |
| 58 | Item No.62 :Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.Add.Spec:Bd.O.5 Page One Number 405. SSR 2022-23It.No.35.07. |
| 59 | Item No.63:Providing andfixing shutter to wall cupboard made from 19 mm thick Teak particle board withapprovedcolouredlaminatedface1.5mmthickbondedwithphenolformaldehyde synthetic resin B.W.P. grade including lipping beading iron oxidisedfixtures andfastening and oil primer coat etc. complete. (Excluding cupboard frame). Add.Spec: As directed by Engineer in charge.SSR 2022-23 Sr.No.1023 It.No.37.21. |
| 60 | Item No.64:Providing and fixing during laying in RCC Slabrectangular 2 mm thickM.S. sheet fan hook box ofsize 180x100 mm with required depth with holes or notches as required, bottom and top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round headed screws together with 12 mm dia. M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surface..Add.Spec: As directed by Engineer in charge.SSR 2022-23It.No.26.68. |
| 61 | Item No.65:Providing andfixing 450mm x550mm size superiortype Belgium mirrorwith16mmdia. nickel plated towel rod etc. complete.Add.Spec: As directed by Engineer in charge.SSR 2022-23It.No.42.20. |
| 62 | Item No.66:Labour charges for providing groove in external plaster having width and spaced as directed by engineer incharge etc. complete.Add.Spec:As directed by Engineer in charge SSR 2022-23 Sr.No.1100 It.No.32.22. |
| 63 | Item No 67 : Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete.Additional Spec As directed by Engineer in charge. SSR 2022-23 Item No 42.31. |
| 64 | ItemNo.68:Providing and fixing board displaying information, such as \"Name of work,Tendercost, Name of Contractor, Work completion and liability period etc\", having rectangularshapeof1.20mx 0.90msizemadeout 18gauge(1.25mm)thickmildsteel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. including,excavation,refilling,transportation,andlabouretccomplete.Spec. No. As directed by Engineer in ChargeAdd.Spec: MORTH 801 SSR 2022-23 Sr.No.288 It.No.06.36 |
| 65 | ItemNo.1:Excavationforfoundationinearth,soilofalltypes,sand,gravelandsoft murum, including removingtheexcavatedmaterialuptoadistanceof50m.beyond thebuildingareaand stackingandspreadingasdirected,dewatering,preparingthe bedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Add.Spec: Bd.A.1 Page No. 259 SSR 2022-23 Sr.No.714 It.No.21.02 |
| 66 | Item No.2 :Providingsoling using80mm sizetrapmetalin15cm.layerincluding filling voidswith Crushed sand/grit, ramming, watering etc. complete.Add.Spec: As directed by Engineer in charge. SSR 2022-23 Sr.No.747 It.No.21.40 |
| 67 | Item No.3:ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-10of trap/granite/ quartzite/gneissmetalforfoundationandbeddingincludingbailingout water,Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided,finishingifrequiredandcuringcomplete,withfullyautomatic micro processorbasedPLCwithSCADAenabledreversibleDrumTypemixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) Add.Spec: Bd. E. 1 Page No. 287 SSR 2022-23 Sr.No.820 It.No.24.01 |
| 68 | ItemNo.4 :Providinguncoursedrubblemasonryoftrap/granite/quartzite/gneissstonesincement mortar1:6infoundationandplinthofinnerwalls/inplinthofexternalwallsincluding bailing out water manually , striking joints on un exposed faces and watering etc.complete. Add.Spec: Bd.H.1 Page One Number 329 SSR 2022-23 Sr.No.714 It.No.28.01 |
| 69 | Item No.5 :ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-20oftrap/granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering,formwork,coverblocks,laying/pumping,compacting,curing,finishingand rougheningthemifspecialfinishistobeprovidedandcuringcomplete.(Excluding reinforcementandstructuralsteel).withfullyautomaticmicroprocessorbasedPLCwith SCADAenabledreversibleDrumTypemixer/concreteBatchmixplant(Panmixer)etc. complete. With fine aggregate (Crushed sand VSI Grade) Add.Spec: Bd. F. 12 Page One Number 304 andB-7, Pg 38 SSR 2022-23 Sr.No.1207 It.No.26.23. |
| 70 | Item No.6 :ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-20oftrap/granite/ quartzite/gneissmetalforR.C.C.pardiofrequiredthicknessincludingsteelcentering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem ifspecialfinishistobeprovidedandcuringcomplete.(Excludingreinforcementand structuralsteel).withfullyautomaticmicroprocessorbasedPLCwithSCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)Add.Spec:Bd.F.11 Page One Number 304 and B.7, Page One Number 38. SSR 2022-23 Sr.No.747 It.No.26.17 |
| 71 | Item No.7 :Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C.pilecaps,footings,foundations,slabs,beamscolumns, canopies,staircase,newels, chajjas,lintelspardis,copings,fins,archesetc.asper detaileddesigns,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.Add.Spec: Bd.F.17, Page No. 306 SSR 2022-23 Sr.No.864 It.No.26.33 |
| 72 | Item No.8:Providinginternalcementplaster12mm thickinsinglecoatincementmortar1:4without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.Add.Spec: Bd. L.2 Page One Number 368 SSR 2022-23 Sr.No.820 It.No.32.04 |
| 73 | Item No.9 : Providing fine cementfinish1.5 mm thick overgreen plastersurface including scaffolding curing etc. complete.Additional SpecificationAs directed by Engineer in charge.SSR 2022-23 Item No.32.21 |
| 74 | Item No.10 :Providing and fabricating structural steel work in rolled sections like joists, channels, angles, teesetc.asperdetaileddesignanddrawingsorasdirectedincludingcutting,fabricating, hoisting,erecting,fixinginpositionmakingriveted/bolted/weldedconnectionswithout connecting plates, braces etc. andincluding one coat of anticorrosive paint andover ittwo coats of oil painting of approved quality and shade etc. complete.Add.Spec: Bd.C.2 Page One Number 275 SSR 2022-23 Sr.No.864 It.No.23.01. |
| 75 | Item No.11 : Providingandfixingcorrugatedgalvanisedironsheetsof0.63mmthick(24B.W.G.)for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 Kilogram/sq.m.).Additional SpecificationBd.R.5, Page One Number 453.SSR 2022-23 Item No.38.04 |
| 76 | Item No.12:Providingandlayingintrenches32mmdai.CPVCpipeincludingnecessaryexcavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line ifnecessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Add.Spec:BD.V 5 page551 and as directed by Engineer incharge SSR 2022-23 Sr.No.1100 It.No.42.64. |
| 77 | ProvidingandFixinghalfturn25mmdiagunmetalflushingcock including all accessories etc. complete.crate shed and Trough. |
| 78 | Item No.69 :Charges for testing of material in vigilance & quality control laboratory For Concrete Compressive Strength OF C.C. Cube (Set of 3 cubes). |
| 79 | ItemNo.72:RoyaltyChargesa)Sand=Royalty + surcharge (2%) As Per SSR 2022-23 The Government of Maharashtra, Revenue and Forest Departments Gazette No.146 Dt.04 June 2021 |
| 80 | Royalty Charges For Supply of Soil 40mm/80mm Metal (Hand Broken) |
