Tender For Annual Repairs To Camp Quarters At Chikla Mine., Bhandara-Maharashtra

Tender For Annual Repairs To Camp Quarters At Chikla Mine.; 1. Dismentalling of existing floor and disposal of dismentaled material up to 50 m away from site and levelling including all lead and lift etc. Complete as directed. Sqm. 400.00 2. Dismentalling of brick masonary and disposal of dismentaled material upto m from site and levelling including all lead and lift, stacking of good quality bricks and transporting to store with contractor own vehicle etc complete as directed. Cum. 20.00 3. Dismentalling of Mod/Lime plaster and disposal of dismentaled material up to 50 m away from site and leveling including all lead and lift with transporting if required etc. Complete as directed. Sqm. 400.00 4. EXCAVATION in soft &hard soil including moorum up to 1.5m depth including removing the excavated materials up to 50m beyond the building area all loft stacking, dewatering etc. For foundation of building, septic tank soil pt. Cum. 200.00 5. Providing & casting in situ plain cement 1:4:8 mix with 38m to 40m gauge black basalt /trap/granite/quartzite /gneiss metal of approved quality including watering, ramming compacting and curing etc.For foundation bed blocks and below floor finish. Cum. 20.00 6. Providing and casting in situ cement concrete M-20 of required grade of trap/ granite/quartzite/gnesis metal for C.C Slab at Plinth Level as per detailed design and drawing including steel centering wood/steel formwork, steel props compacting and finishing uneven and honeycombed surfaces with C:M 1:3 of sufficient minimum thickness to give smooth and even surface or roughning the surface if special fininsh is to be provided and curing etc. Complete as directed. Excluding Reinforcement and structural steel and including cover blocks. The cement mortar 1:3 plaster is considered for rendering honeycombed and uneven surfacess only) Newly laid concrete shall be covered by gunny bags plastic(Wooden Centering will not be allowed) Cum. 15.00 7. Providing & laying Fe 415 steel and mild steel of different dia for reinforcement for RCC work including curring, bending, hooking , binding with G.I. wire 18 gauge or tack welding as per drawing and design complete as directed. Kgs. 1050.00 8. Providing and construting second class 76mm or 114mm thick kiln bunnt masonary with convenctional bricks in C.M. 1:4 for all type of wall with M.S. reinforcement of 2 bars of 6mm dia. After every fourth layar bending the ends properly including scaffolin racking of joints and 21 days curing etc. Complete as directed by engineer in charge. Sqm. 200.00 9. Providing & Constructing 229mm or 343 mmthick second olass kiln burnt brick masonry with conventional brick in cement mortar 1:5 in foundation & surperstructures including dewatering, striking, joints on exposed faces raking out joints in exposed faces Cum. 25.00 10. Providing and applying 13mm thick cement plaster in C.M. 1:6 to all internal and external walls in single coat including all scaffolding and curing etc. complete as directed. Sqm. 1200.00 11. Providing & Laying I.P.S. floring of minimum 40 mm thick with cement concrete 1:2:4 with 20 mm guage graded metal of trap granite/ quartzite/ gneiss/ black basat netal of approved quality laid to proper level and slopes including compacting filling and marking lines to give the apperance of tiles 30cm or as directed with smooth extra cement of specified colour including curing etc complete as directed. Sqm. 1000.00 12. Providing and fixing of kaddapa stone slab of approved quality for kichen plate form including trasportation, finishing fixing etc complete as directed. Sqm. 30.00 13. Providing and fixing 4mm thick glass/ bazari glass in window ventilator and door including the broken glss fixing of binding teak wood if required etc. Complete as directed Sq.Ft. 200.00 14. Repair to old steel doors by fabricating required sections of mild steel hinged and other fixtures as per requirement. Complete as directed. Nos. 100.00 15. Repairing of stell door/window including finish like GI sheet, holdfast, L-drops hinges etc all cost of materials and finishing and painting etc.complete as directed including removing of doors & refixing the same after repair etc. Nos. 100.00 16. Repairing of wooden doors including all fixing like planks, button hold fast L-drops all cost of carpentor and materials and finishing etc complete as directed. Nos. 100.00 17. roviding & applying white wash of best quality to all internal and external surfaces in all positions & surfaces in two coats including brooming etc. Complete as directed. Sq.M 1000.00 18. Providing and applying washable oil bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces (including the primer coat) complete as directed. Sq.M 3600.00 19. Providing and fixing factory made precast door/ window frames of C.C.M40 grade of section 100 mm x 60 mm including reinforcement as per I.S.6523 with polymeric blocks having screw holding capacity of 250 kg/screw fixed in position in R.C.C. frame as per requirement and as per specifications without fanlight including holdfasts, carting and erecting in position and two coats of oil paint etc. complete. M 100.00 20. MS DOOR :- Providing & fixing in position steel doors with door frame of 35mmx 35mm x5mm. M.S. angle & paneled type shutter of M.S. sheet of 20 guage welded on door shutter frame of 25mm x 25mm x 5mm. M.S. angle with M.S. strips of 30 mm 30mm x 5mm welded horizontally & diagonally to the rear face of door shutter as per drawingincluding all necessary fixtures & fastenings like both side of door frame with cement concrete bed blocks of 1:2:4 mix. Curing bed blocks,painting two coats of enamel paint of approved make & shade over one coat of red oxide primer paint etc. complete as directed & as per drawing. including Removing exiting damage door etc complete as directed by engineer in inchage Sqm. 25.00 21. Providing and laying of ceramic tiles of approved quality on floor surface in required position laid on bed with necessary dismentaling of plaster and refinishing of C.M. 1:4 including Sqm. 200.00 cement float, filling joints with white/colour cement slurry, cleaning, curing etc. Complete as directed. 22. Providing and fixing 6 mm thick Asbestos cement sheet for false ceiling including fabrication, errection with galvanised iron 25mm x 25mm x 5mm and M.S.tee with 25mm x 5mm with providing extra support for false ceiling fan with 10mm dia to roof structure with providing 2 coats distemper etc. complete as directed by Engineer in charge. Sqm. 100.000 23. Sliding Windows: Providing and fixing in position Aluminium extruded section Powder coated Three track sliding windows having frame made out extruded tubular section of size 34 mm x 42 mm or as required size in proportionate weight of average thickness 1.50 mm and weight 0.726 kg per metre or as required, mechanically assembled at corners with glazing beading of average 0.26 kg per running metre or required weight including plain sheet glass with neoprene rubber gasket etc. complete. As per Architects drawing Job No. T MISC 5000 drawing No.22 dated 3.2.1992 Sqm. 20.000 24. Providing and fixing M.S. grill doors weighing 22 to 24 Kg per Sq. mtr. of required size as per detailed drawing without hot dip coating with iron oxidised fixtures and fastenings and painting with 3 coats oil paint etc. complete. Sqm. 20.000

Refer document

INR 15.26 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB