Repair And Renovation Of Dio Quarter- 1 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:1:3:6 or richer mix (i/c equivalent design mix) 2 Renewing glass panes, with putty and nails wherever necessary including raking out old putty :A. Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm) 3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering grade. All work upto linth level. A. 1:5:10 (1 cement : 5 coarse sand : 10 graded crushed stone agg. 40mm nominal size) crushed 4 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. 5 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer 6 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. 7 Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 8 Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 9 Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 10 Providing and fixing brass curtain rods of wall thickness 1.25 mmwith twobrass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 11 Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, ofrequired size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed withmatching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Raj Nagar plain white marble/Udaipur green marble/zebra black marble Granite of any colour or shade (Area of slab upto 0.5 sqm) 16mm 12 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). ; Size of tile 60x60 cm 13 PROVIDING AND FIXING OF LIGHTING POINTS /FAN POINTS IN 1.5 MM PVC INSULATED COPPER WIRE LAID THROUGH PVC CONDUIT PIPE /CHANNELS OF SIZE WITH ITS FITTING OF APPROVED MAKE INCLUDING PROVIDING AND FIXING OF 6-AMP SWITCH RECESSED /SURFACE POINT TAKEN UPTO DB DULLY TESTED & COMISSIONING COMPLETE..AS PER BIS 732 (1989) 14 PROVIDING AND FIXING OF HEATING POINTS IN 4 MM PVC INSULATED COPPER WIRE LAID THROUGH PVC CONDUIT PIPE /CHANNELS OF SIZE WITH ITS FITTING WITH 2.5 MM PVC INSULATED COPPER WIRE OF SAME MAKEINCLUDING PROVIDING AND FIXING OF 6/16 -AMP SWITCH RECESSED /SURFACE POINT TAKEN UPTO DB DULLY TESTED & COMISSIONING COMPLETE..AS PER BIS 732 (1989) 15 PROVIDING AND FIXING OF WIRING FOR 3-5 PIN 6-AMP SOCKET POINTS IN 2.5 MM PVC COPPERWIRE LAID THROUGH PVC CONDUIT PIPE /CHANNELS OF SIZE WITH ITS FITTING OF SAME MAKEINCLUDING PROVIDING AND FIXING OF 5-PIN 6-AMP SWITCH/SOCKET TAKEN UPTO DB DULLY TESTED & COMISSIONING COMPLETE..AS PER BIS 732 (1989) 16 PROVIDING AND FIXING OF 8-12 WATT LED SURFACE LIGHT FITTINGS (ROUND/SQUARE SHAPE) COMPLETE IN ALL RESPECTS 17 engaging of mazdoor for disposal 18 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perI.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 19 510x1040mm bowl depth 225mm 20 Providing and fixing factory made Kitchen Cabinet Shutter/Partition20mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges withnecessary stainless steel screws, all complete as per direction of Engineer-in-charge. 21 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 22 Carriage of material by M.T inclloading/unloading& stacking complete 23 C. Sand av. Lead 120 km 24 D. Stone agg. Below 40 mm nominal size av. Lead 20 km 25 E. Disposal of material 5 km
